| Commit message (Collapse) | Author | Files | Lines |
|---|
|
isa_init_irq() has become a trivial one-line wrapper for isa_get_irq().
It can therefore be removed.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com> (tpm_tis_isa)
Acked-by: Corey Minyard <cminyard@mvista.com> (isa_ipmi_bt, isa_ipmi_kcs)
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20220301220037.76555-8-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220307134353.1950-14-philippe.mathieu.daude@gmail.com>
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
|
|
Now that the last users of ISADevice::isairq[] have been resolved during the
previous commits, it can be removed for good.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220301220037.76555-7-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220307134353.1950-13-philippe.mathieu.daude@gmail.com>
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
|
|
All isabus_dev_print() did was to print up to two IRQ numbers per
device. This is redundant if the IRQ numbers are present as QOM
properties (see e.g. the modified tests/qemu-iotests/172.out).
Now that the last devices relying on isabus_dev_print() had their IRQ
numbers QOM'ified, the contribution of this function ultimately became
redundant. Remove it.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220301220037.76555-5-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220307134353.1950-12-philippe.mathieu.daude@gmail.com>
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
|
|
Exposing the IRQ numbers as QOM properties not only allows them to be
configurable but also to be printed by standard QOM mechanisms. This
allows isabus_dev_print() to be retired eventually.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220301220037.76555-4-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220307134353.1950-11-philippe.mathieu.daude@gmail.com>
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
|
|
Exposing the IRQ number as a QOM property not only allows it to be
configurable but also to be printed by standard QOM mechanisms. This allows
isabus_dev_print() to be retired eventually.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220301220037.76555-3-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220307134353.1950-10-philippe.mathieu.daude@gmail.com>
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
|
|
Exposing the IRQ number as a QOM property not only allows it to be
configurable but also to be displayed in HMP:
Before:
(qemu) info qtree
...
dev: mc146818rtc, id ""
gpio-out "" 1
base_year = 0 (0x0)
lost_tick_policy = "discard"
After:
dev: mc146818rtc, id ""
gpio-out "" 1
base_year = 0 (0x0)
irq = 8 (0x8)
lost_tick_policy = "discard"
The reason the IRQ number didn's show up before is that this device does not
call isa_init_irq().
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220301220037.76555-2-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220307134353.1950-9-philippe.mathieu.daude@gmail.com>
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
|
|
Now that gt64120_register() lost its pic parameter, there is an
opportunity to remove it. gt64120_register() is old style by wrapping
qdev API, and the new style is to use qdev directly. So take the
opportunity and modernize the code.
Suggested-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <20220217101924.15347-8-shentey@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
|
|
This is a follow-up on patch "malta: Move PCI interrupt handling from
gt64xxx_pci to piix4". gt64xxx_pci used magic constants, and probably
didn't want to use piix4-specific constants. Now that the interrupt
handing resides in piix4, its constants can be used.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20220217101924.15347-7-shentey@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
|
|
Now that piix4_set_irq's opaque parameter references own PIIX4State,
piix4_dev becomes redundant.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20220217101924.15347-6-shentey@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
|
|
Passing PIIX4State rather than just the qemu_irq allows for resolving
the global piix4_dev variable.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20220217101924.15347-5-shentey@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
|
|
This is a follow-up on patch "malta: Move PCI interrupt handling from
gt64xxx_pci to piix4" where i8259[] was moved from MaltaState to
PIIX4State to make the code movement more obvious. However, i8259[]
seems redundant to *isa, so remove it.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20220217101924.15347-4-shentey@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
|
|
Handling PCI interrupts in piix4 increases cohesion and reduces differences
between piix4 and piix3.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220217101924.15347-3-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
|
|
Based on commit e735b55a8c11dd455e31ccd4420e6c9485191d0c:
piix_pci: eliminate PIIX3State::pci_irq_levels
PIIX3State::pci_irq_levels are redundant which is already tracked by
PCIBus layer. So eliminate them.
The IRQ levels in the PCIBus layer are already preserved during
migration. By reusing them and rather than having a redundant implementation
the bug is avoided in the first place.
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20220217101924.15347-2-shentey@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
|
|
When writing zeroes can fall back to a slow write, permitting an
overly large request can become an amplification denial of service
attack in triggering a large amount of work from a small request. But
the whole point of the no fallback flag is to quickly determine if
writing an entire device to zero can be done quickly (such as when it
is already known that the device started with zero contents); in those
cases, artificially capping things at 2G in qemu-io itself doesn't
help us.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20211203231539.3900865-4-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
|
|
The block layer has supported 64-bit block status from drivers since
commit 86a3d5c688 ("block: Add .bdrv_co_block_status() callback",
v2.12) and friends, with individual driver callbacks responsible for
capping things where necessary. Artificially capping things below 2G
in the qemu-io 'map' command, added in commit d6a644bbfe ("block: Make
bdrv_is_allocated() byte-based", v2.10) is thus no longer necessary.
One way to test this is with qemu-nbd as server on a raw file larger
than 4G (the entire file should show as allocated), plus 'qemu-io -f
raw -c map nbd://localhost --trace=nbd_\*' as client. Prior to this
patch, the NBD_CMD_BLOCK_STATUS requests are fragmented at 0x7ffffe00
distances; with this patch, the fragmenting changes to 0x7fffffff
(since the NBD protocol is currently still limited to 32-bit
transactions - see block/nbd.c:nbd_client_co_block_status). Then in
later patches, once I add an NBD extension for a 64-bit block status,
the same map command completes with just one NBD_CMD_BLOCK_STATUS.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20211203231539.3900865-3-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
|
|
Spelling fixes, grammar improvements and consistent spacing, noticed
while preparing other patches in this file.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20211203231539.3900865-2-eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
|
|
This validates that connections to an NBD server running on a UNIX
socket can use TLS with pre-shared keys (PSK).
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220304193610.3293146-13-berrange@redhat.com>
[eblake: squash in rebase fix]
Tested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
|
|
This validates that connections to an NBD server running on a UNIX
socket can use TLS, and require a TLS hostname override to pass
certificate validation.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220304193610.3293146-12-berrange@redhat.com>
[eblake: squash in rebase fix]
Tested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
|
|
This validates that connections to an NBD server where the certificate
hostname does not match will fail. It further validates that using the
new 'tls-hostname' override option can solve the failure.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220304193610.3293146-11-berrange@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
|
|
Using standard filters is more future proof than rolling our own.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220304193610.3293146-10-berrange@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
|
|
Introduce a filter for the output of qemu-nbd export list so it can be
reused in multiple tests.
The filter is a bit more permissive that what test 241 currently uses,
as its allows printing of the export count, along with any possible
error messages that might be emitted.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220304193610.3293146-9-berrange@redhat.com>
Tested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
|
|
The second bit of IAPC_BOOT_ARCH in FADT table indicates the presence of
keyboard controller implemented as 8042 or equivalent micro controller. This
change enables this flag for microvms if such a device exists (for example,
when added explicitly from the QEMU commandline). Change
654701e292d98b308b0 ("hw/acpi: add indication for i8042 in IA-PC boot flags of the FADT table")
enabled this flag for i386 q35 based machines. The reason for doing the same
for micro-vms is to make sure we provide the correct tables to the guest OS
uniformly in all cases when an i8042 device is present. When this bit is not
enabled, guest OSes has to find other indirect methods to detect the device
which we would like to avoid.
Signed-off-by: Ani Sinha <ani@anisinha.ca>
Message-Id: <20220304154032.2071585-5-ani@anisinha.ca>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Some tests will want to use 'localhost' instead of '127.0.0.1', and
some will use the image options syntax rather than the classic URI
syntax.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220304193610.3293146-8-berrange@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
|
|
When developing an I/O test it is typical to add some logic to the
test script, run it to view the output diff, and then apply the
output diff to the reference file. This can be drastically simplified
by letting the test runner update the reference file in place.
By setting 'QEMU_IOTESTS_REGEN=1', the test runner will report the
failure and show the diff, but at the same time update the reference
file. So next time the I/O test is run it will succeed.
Continuing to display the diff when updating the reference gives the
developer a chance to review what was changed.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220304193610.3293146-7-berrange@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
|
|
The TLS usage for NBD was restricted to IP sockets because validating
x509 certificates requires knowledge of the hostname that the client
is connecting to.
TLS does not have to use x509 certificates though, as PSK (pre-shared
keys) provide an alternative credential option. These have no
requirement for a hostname and can thus be trivially used for UNIX
sockets.
Furthermore, with the ability to overide the default hostname for
TLS validation in the previous patch, it is now also valid to want
to use x509 certificates with FD passing and UNIX sockets.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220304193610.3293146-6-berrange@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
|
|
When using the --list option, qemu-nbd acts as an NBD client rather
than a server. As such when using TLS, it has a need to validate
the server certificate. This adds a --tls-hostname option which can
be used to override the default hostname used for certificate
validation.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220304193610.3293146-5-berrange@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
|
|
When connecting to an NBD server with TLS and x509 credentials,
the client must validate the hostname it uses for the connection,
against that published in the server's certificate. If the client
is tunnelling its connection over some other channel, however, the
hostname it uses may not match the info reported in the server's
certificate. In such a case, the user needs to explicitly set an
override for the hostname to use for certificate validation.
This is achieved by adding a 'tls-hostname' property to the NBD
block driver.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220304193610.3293146-4-berrange@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
|
|
In
commit a71d597b989fd701b923f09b3c20ac4fcaa55e81
Author: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Date: Thu Jun 10 13:08:00 2021 +0300
block/nbd: reuse nbd_co_do_establish_connection() in nbd_open()
the use of the 'hostname' field from the BDRVNBDState struct was
lost, and 'nbd_connect' just hardcoded it to match the IP socket
address. This was a harmless bug at the time since we block use
with anything other than IP sockets.
Shortly though, we want to allow the caller to override the hostname
used in the TLS certificate checks. This is to allow for TLS
when doing port forwarding or tunneling. Thus we need to reinstate
the passing along of the 'hostname'.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220304193610.3293146-3-berrange@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
|
|
Currently the TLS session object assumes that the caller will always
provide a hostname when using x509 creds on a client endpoint. This
relies on the caller to detect and report an error if the user has
configured QEMU with x509 credentials on a UNIX socket. The migration
code has such a check, but it is too broad, reporting an error when
the user has configured QEMU with PSK credentials on a UNIX socket,
where hostnames are irrelevant.
Putting the check into the TLS session object credentials validation
code ensures we report errors in only the scenario that matters.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220304193610.3293146-2-berrange@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
|
|
Mea culpa. Dan's patch wound up with the wrong import path because I
re-ordered my most recent pull request and missed that this needed a fix
on rebase.
Fixes: 43912529
Reported-by: Kashyap Chamarthy <kchamart@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Tested-by: Kashyap Chamarthy <kchamart@redhat.com>
Message-id: 20220225170828.3418305-1-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
|
|
_bind_hack() was a quick fix to allow async QMP to call bind(2) prior to
calling listen(2) and accept(2). This wasn't sufficient to fully address
the race condition present in synchronous clients.
With the race condition in legacy.py fixed (see the previous commit),
there are no longer any users of _bind_hack(). Drop it.
Fixes: b0b662bb2b3
Signed-off-by: John Snow <jsnow@redhat.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20220225205948.3693480-11-jsnow@redhat.com
[Expanded commit message. --js]
Signed-off-by: John Snow <jsnow@redhat.com>
|
|
legacy.py provides a synchronous model. iotests frequently uses this
paradigm:
- create QMP client object
- start QEMU process
- await connection from QEMU process
In the switch from sync to async QMP, the QMP client object stopped
calling bind() and listen() during the QMP object creation step, which
creates a race condition if the QEMU process dials in too quickly.
With refactoring out of the way, restore the former behavior of calling
bind() and listen() during __init__() to fix this race condition.
Signed-off-by: John Snow <jsnow@redhat.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20220225205948.3693480-10-jsnow@redhat.com
[Expanded commit message. --js]
Signed-off-by: John Snow <jsnow@redhat.com>
|
|
Add start_server() and accept() methods that can be used instead of
start_server_and_accept() to allow more fine-grained control over the
incoming connection process.
(Eagle-eyed reviewers will surely notice that it's a bit weird that
"CONNECTING" is a state that's shared between both the start_server()
and connect() states. That's absolutely true, and it's very true that
checking on the presence of _accepted as an indicator of state is a
hack. That's also very certainly true. But ... this keeps client code an
awful lot simpler, as it doesn't have to care exactly *how* the
connection is being made, just that it *is*. Is it worth disrupting that
simplicity in order to provide a better state guard on `accept()`? Hm.)
Signed-off-by: John Snow <jsnow@redhat.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20220225205948.3693480-9-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
|
|
Before we allow the full separation of starting the server and accepting
new connections, make sure that the disconnect cleans up the server and
its new state, too.
Signed-off-by: John Snow <jsnow@redhat.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20220225205948.3693480-8-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
|
|
Refactor _do_accept() into _do_start_server() and _do_accept(). As of
this commit, the former calls the latter, but in subsequent commits
they'll be split apart.
(So please forgive the misnomer for _do_start_server(); it will live up
to its name shortly, and the docstring will be updated then too. I'm
just cutting down on some churn.)
Signed-off-by: John Snow <jsnow@redhat.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20220225205948.3693480-7-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
|
|
I would really like to keep this under 1000 lines, I promise. Doesn't
look like it's gonna happen.
Signed-off-by: John Snow <jsnow@redhat.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20220225205948.3693480-6-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
|
|
As part of disentangling the monolithic nature of _do_accept(), split
out the incoming callback to prepare for factoring out the "wait for a
peer" step. Namely, this means using an event signal we can wait on from
outside of this method.
Signed-off-by: John Snow <jsnow@redhat.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20220225205948.3693480-5-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
|
|
These two methods attempted to entirely envelop the logic of
establishing a connection to a peer start to finish. However, we need to
break apart the incoming connection step into more granular steps. We
will no longer be able to reasonably constrain the logic inside of these
helper functions.
So, remove them - with _session_guard(), they no longer serve a real
purpose.
Although the public API doesn't change, the internal API does. Now that
there are no intermediary methods between e.g. connect() and
_do_connect(), there's no hook where the runstate is set. As a result,
the test suite changes a little to cope with the new semantics of
_do_accept() and _do_connect().
Lastly, take some pieces of the now-deleted docstrings and move
them up to the public interface level. They were a little more detailed,
and it won't hurt to keep them.
Signed-off-by: John Snow <jsnow@redhat.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20220225205948.3693480-4-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
|
|
Previously, I had a method named "accept()" that under-the-hood calls
bind(2), listen(2) *and* accept(2). I meant this as a simplification and
counterpart to the one-shot "connect()" method.
This is confusing to readers who expect accept() to mean *just*
accept(2). Since I need to split apart the "accept()" method into
multiple methods anyway (one of which strongly resembling accept(2)), it
feels pertinent to rename this method *now*.
Rename this all-in-one method "start_server_and_accept()" instead.
Signed-off-by: John Snow <jsnow@redhat.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20220225205948.3693480-3-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
|
|
In _new_session, there's a fairly complex except clause that's used to
give semantic errors to callers of accept() and connect(). We need to
create a new two-step replacement for accept(), so factoring out this
piece of logic will be useful.
Bolster the comments and docstring here to try and demystify what's
going on in this fairly delicate piece of Python magic.
(If we were using Python 3.7+, this would be an @asynccontextmanager. We
don't have that very nice piece of magic, however, so this must take an
Awaitable to manage the Exception contexts properly. We pay the price
for platform compatibility.)
Signed-off-by: John Snow <jsnow@redhat.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20220225205948.3693480-2-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
|
|
Since the previous commit 9ea89876f9d ("target/mips: Fix cycle
counter timing calculations"), MIPSCPU::cp0_count_rate is not
used anymore. We don't need it since it is already expressed
as mips_def_t::CCRes. Remove the duplicate and clean.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <>20211213102340.1847248-1-f4bug@amsat.org>
|
|
The cp0_count_ns value is calculated from the CP0_COUNT_RATE_DEFAULT
constant in target/mips/cpu.c. The cycle counter resolution is defined
per-CPU in target/mips/cpu-defs.c.inc; use this value for calculating
cp0_count_ns. Fixings timing problems on guest OSs for the 20Kc CPU
which has a CCRes of 1.
Signed-off-by: Simon Burge <simonb@NetBSD.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20211213135125.18378-1-simonb@NetBSD.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
|
|
Qemu might crash when provided incomplete '-global' option.
For example:
qemu-system-x86_64 -global driver=isa-fdc
qemu-system-x86_64: ../../devel/qemu/qapi/string-input-visitor.c:394:
string_input_visitor_new: Assertion `str' failed.
Aborted (core dumped)
Fixes: 3751d7c43f795b ("vl: allow full-blown QemuOpts syntax for -global")
Signed-off-by: Rohit Kumar <rohit.kumar3@nutanix.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/604
Message-Id: <20220216071508.412974-1-rohit.kumar3@nutanix.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
|
The old image did not have python3 yet, and thus was not usable
for compiling QEMU anymore.
Suggested-by: Alexander von Gluck IV <kallisti5@unixzen.com>
Message-Id: <20220216154208.2985103-1-kallisti5@unixzen.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
|
The BootLinux tests are currently failing with an ugly python
stack trace on my RHEL8 system since they cannot get a free port
(likely due to the firewall settings on my system). Let's properly
check the return value of find_free_port() instead and cancel the
test gracefully if it cannot get a free port.
Message-Id: <20220228114325.818294-1-thuth@redhat.com>
Reviewed-by: Beraldo Leal <bleal@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
|
There is a Linux kernel bug present until v5.12 that prevents
booting with FEAT_LPA2 enabled. As a workaround for TCG,
disable this feature for machine versions prior to 7.0.
Cc: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
|
|
There is a Linux kernel bug present until v5.12 that prevents
booting with FEAT_LPA2 enabled. As a workaround for TCG, allow
the feature to be disabled from -cpu max.
Since this kernel bug is present in the Fedora 31 image that
we test in avocado, disable lpa2 on the command-line.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
This provides standard look and feel for the about panel and reduces
code.
Signed-off-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Message-id: 20220227042241.1543-1-akihiko.odaki@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
The trace_gicv3_icv_hppir_read trace event takes an integer value
which it uses to form the register name, which should be either
ICV_HPPIR0 or ICV_HPPIR1. We were passing in the 'grp' variable for
this, but that is either GICV3_G0 or GICV3_G1NS, which happen to be 0
and 2, which meant that tracing for the ICV_HPPIR1 register was
incorrectly printed as ICV_HPPIR2.
Use the same approach we do for all the other similar trace events,
and pass in 'ri->crm == 8 ? 0 : 1', deriving the index value
directly from the ARMCPRegInfo struct.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220303202341.2232284-6-peter.maydell@linaro.org
|
|
We forgot a space in some log messages, so the output ended
up looking like
gicv3_dist_write: invalid guest write at offset 0000000000008000size 8
with a missing space before "size". Add the missing spaces.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220303202341.2232284-5-peter.maydell@linaro.org
|