| Commit message (Collapse) | Author | Files | Lines |
|---|
|
Debian trixie has been released. The "stable" alias no longer refers to
the Debian bookworm release, so URLs referring to bookworm artifacts via
the "stable" alias no longer work.
Switch to explicit release naming ("bookworm") to make a permalink so
the test passes again.
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Fixes: 374a245573b8 ("tests/functional: Add PCI hotplug test for aarch64")
Resolves: #3073 ("PCI hotplug test for aarch64 fails due to broken Debian installer URL")
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-ID: <20250811162315.59997-1-stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
The emulated device had let the user set whatever max transfers size
they wanted, including no limit. However the device does have an
internal limit of 1024 segments. NVMe doesn't report max segments,
though. This is implicitly inferred based on the MDTS and MPSMIN values.
IOV_MAX is currently 1024 which 4k PRPs can exceed with 2MB transfers.
Don't allow MDTS values that can exceed this, otherwise users risk
seeing "internal error" status to their otherwise protocol compliant
commands.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
|
|
Commit cd59f50ab017 ("hw/nvme: always initialize a subsystem") causes
the controller to always set the CMIC.MCTRS ("Multiple Controllers")
bit. While spec-compliant, this is a deviation from the previous
behavior where this was only set if an nvme-subsys device was explicitly
created (to configure a subsystem with multiple controllers/namespaces).
Revert the behavior to only set CMIC.MCTRS if an nvme-subsys device is
created explicitly.
Reported-by: Alan Adamson <alan.adamson@oracle.com>
Fixes: cd59f50ab017 ("hw/nvme: always initialize a subsystem")
Reviewed-by: Alan Adamson <alan.adamson@oracle.com>
Tested-by: Alan Adamson <alan.adamson@oracle.com>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
|
|
Commit 6ccca4b6bb9f ("hw/nvme: rework csi handling") introduced a bug in
Namespace Attachment, causing it to
a) not allow a controller to attach namespaces to other controllers
b) assert if a valid non-attached namespace is detached
This fixes both issues.
Fixes: 6ccca4b6bb9f ("hw/nvme: rework csi handling")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2976
Reviewed-by: Jesper Wendel Devantier <foss@defmacro.it>
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
|
|
The new QAPI code generator creates a cross-reference target for each
definition documentation. Enabled for the QEMU QMP Reference manual
in commit a377f39f38f, and for the QEMU Storage Daemon QMP Reference
Manual and the QEMU Guest Agent Protocol Reference in commit
a6af5443440. We've put these targets to use since, but neglected to
update doc comment markup documentation. Do that now.
Co-developed-by: John Snow <jsnow@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20250731054044.4011789-4-armbru@redhat.com>
|
|
Fixes: 3248c1aaf2db (docs: update the documentation upfront about schema configuration)
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20250731054044.4011789-3-armbru@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
|
|
Missed in commit 9c66762a601 (docs/qapi-code-gen: add
cross-references).
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20250731054044.4011789-2-armbru@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
|
|
Commit 350785d41d8b ("ramfb: Add property to control if load the
romfile") introduced the `use-legacy-x86-rom` property for the
`vfio-pci-nohotplug` device. Add documentation for the property.
Fixes: d5fcf0d960d8 ("hw/i386: Add the ramfb romfile compatibility")
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Link: https://lore.kernel.org/qemu-devel/20250805065543.120091-1-clg@redhat.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
|
|
cpr-transfer may lose a VFIO interrupt because the KVM instance is
destroyed and recreated. If an interrupt arrives in the middle, it is
dropped. To fix, stop pending new interrupts during cpr save, and pick
up the pieces. In more detail:
Stop the VCPUs. Call kvm_irqchip_remove_irqfd_notifier_gsi --> KVM_IRQFD to
deassign the irqfd gsi that routes interrupts directly to the VCPU and KVM.
After this call, interrupts fall back to the kernel vfio_msihandler, which
writes to QEMU's kvm_interrupt eventfd. CPR already preserves that
eventfd. When the route is re-established in new QEMU, the kernel tests
the eventfd and injects an interrupt to KVM if necessary.
Deassign INTx in a similar manner. For both MSI and INTx, remove the
eventfd handler so old QEMU does not consume an event.
If an interrupt was already pended to KVM prior to the completion of
kvm_irqchip_remove_irqfd_notifier_gsi, it will be recovered by the
subsequent call to cpu_synchronize_all_states, which pulls KVM interrupt
state to userland prior to saving it in vmstate.
Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Link: https://lore.kernel.org/qemu-devel/1752689169-233452-3-git-send-email-steven.sistare@oracle.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
|
|
Extend vfio_pci_msi_set_handler() so it can set or clear the handler.
Add a similar accessor for INTx. No functional change.
Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/1752689169-233452-2-git-send-email-steven.sistare@oracle.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
|
|
According to the specification, [X]VLDI should trigger an invalid instruction
exception only when Bit[12] is 1 and Bit[11:8] > 12. This patch fixes an issue
where an exception was incorrectly raised even when Bit[12] was 0.
Test case:
```
.global main
main:
vldi $vr0, 3328
ret
```
Reported-by: Zhou Qiankang <wszqkzqk@qq.com>
Signed-off-by: WANG Rui <wangrui@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Message-ID: <20250804132212.4816-1-wangrui@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
|
|
brlapi__openConnection returns a brlapi_fileDescriptor which is a pointer
for Windows builds.
The test for brlapi fails with cross builds on Debian trixie
(x86_64-w64-mingw32-gcc (GCC) 14-win32):
testfile.c:4:30: error: returning 'brlapi_fileDescriptor' {aka 'void *'} from a function with return type 'int' makes integer from pointer without a cast [-Wint-conversion]
4 | int main(void) { return brlapi__openConnection (NULL, NULL, NULL); }
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-----------
../../../meson.build:1607: WARNING: could not link brlapi, disabling
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
|
|
Commit c0ddcb2cbc146e introduced the test which uses cache=direct
mode, without checking if the scratch filesystem supports O_DIRECT.
A subsequent commit, afeb002e0ad49d, tried to fix that issue, but
instead of checking for o_direct, it checked for
`_supported_cache_modes none directsync`, which is not what the
original mirror-sparse test uses. Fix both by actually checking
for o_direct.
Fixes: c0ddcb2cbc146e "tests: Add iotest mirror-sparse for recent patches"
Fixes: afeb002e0ad49d "tests/qemu-iotests/tests/mirror-sparse: skip if O_DIRECT is not supported"
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
|
|
Replace -1 comparisons for wint_t with WEOF to fix infinite loop caused by a
65535 == -1 comparison.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2905
Signed-off-by: William Hu <purplearmadillo77@proton.me>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
[ Marc-André - Add missing similar code change, remove a comment ]
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-ID: <tSO5to8--iex6QMThG3Z8ElfnNOUahK_yitw2G2tEVRPoMKV936CBdrpyfbeNpVEpziKqeQ1ShBwPOoDkofgApM8YWwnPKJR_JrPDThV8Bc=@proton.me>
|
|
The implementation of this workaround does not currently work, so
remove the option entirely to avoid exposing it to users. The code
will remain (temporarily dormant) to be fixed in the next release
cycle.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/qemu-devel/20250805182431.504158-1-berrange@redhat.com
Signed-off-by: Fabiano Rosas <farosas@suse.de>
|
|
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
This test uses cache.direct=true, but does not check if O_DIRECT
is supported by the underlying filesystem, and fails, for example,
on a tmpfs (which is rather common on various auto-builders, in CI,
etc).
Fix this by using `_supported_cache_modes none directsync`.
Fixes: c0ddcb2cbc146e "tests: Add iotest mirror-sparse for recent patches"
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20250805181731.282677-1-mjt@tls.msk.ru>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Commit v9.0.0-343-g2048129625 introduced usage of
g_file_set_contents() function to write to /sys/power/state.
This function uses G_FILE_SET_CONTENTS_CONSISTENT flag to
g_file_set_contents_full(), which is implemented by creating
a temp file in the same directory and renaming it to the final
destination. Which is not how sysfs works.
Here, there's not a big deal to do open/write/close - it becomes
almost the same as using g_file_set_contents[_full](). But it
does not have surprises like this.
Also, since this is linux code, it should be ok to use %m in
the error reporting function.
Fixes: 2048129625 "qga/commands-posix: don't do fork()/exec() when suspending via sysfs"
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/3057
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20250801115316.6845-1-mjt@tls.msk.ru>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
With a microvm-only build based on a custom device config,
we get a link failure due to undefined reference to
build_pci_host_bridge_osc_method() which is defined in hw/acpi/pci.c and
whose compilation depends on CONFIG_ACPI_PCI. Although CONFIG_ACPI
and CONFIG_PCI are set with such configuration, implied CONFIG_ACPI_PCI
in config PCI_EXPRESS_GENERIC_BRIDGE is not selected as expected.
It Looks like CONFIG_ACPI_PCI must be enforced and this patch selects
CONFIG_ACPI_PCI in MICROVM config directly as done for PC config.
Reproducer:
../configure \
--without-default-features \
--target-list=x86_64-softmmu \
--enable-kvm --disable-tcg \
--enable-pixman \
--enable-vnc \
--audio-drv-list="" \
--without-default-devices \
--with-devices-x86_64=microvm \
--enable-vhost-user
with configs/devices/x86_64-softmmu/microvm.mak:
CONFIG_PCI_DEVICES=n
CONFIG_MICROVM=y
CONFIG_VIRTIO_BLK=y
CONFIG_VIRTIO_SERIAL=y
CONFIG_VIRTIO_INPUT=y
CONFIG_VIRTIO_INPUT_HOST=y
CONFIG_VHOST_USER_INPUT=y
CONFIG_VIRTIO_NET=y
CONFIG_VIRTIO_SCSI=y
CONFIG_VIRTIO_RNG=y
CONFIG_VIRTIO_CRYPTO=y
CONFIG_VIRTIO_BALLOON=y
CONFIG_VIRTIO_GPU=y
CONFIG_VHOST_USER_GPU=y
FAILED: qemu-system-x86_64
cc -m64 @qemu-system-x86_64.rsp
/usr/bin/ld: libsystem.a.p/hw_pci-host_gpex-acpi.c.o: in function `acpi_dsdt_add_host_bridge_methods':
hw/pci-host/gpex-acpi.c:83:(.text+0x274): undefined reference to `build_pci_host_bridge_osc_method'
collect2: error: ld returned 1 exit status
Fixes: af151d50eac24 "hw/pci-host/gpex-acpi: Use build_pci_host_bridge_osc_method"
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reported-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Message-ID: <20250804152008.247673-1-eric.auger@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
|
|
CPUID[0x1]
Currently, the addressable ID encoding for CPUID[0x1].EBX[bits 16-23]
(Maximum number of addressable IDs for logical processors in this
physical package) is covered by vendor_cpuid_only_v2 compat property.
The previous consideration was to avoid breaking migration and this
compat property makes it unfriendly to backport the commit f985a1195ba2
("i386/cpu: Fix number of addressable IDs field for CPUID.01H.EBX
[23:16]").
However, NetBSD booting is broken since the commit 88dd4ca06c83
("i386/cpu: Use APIC ID info to encode cache topo in CPUID[4]"),
because NetBSD calculates smt information via `lp_max` / `core_max` for
legacy Intel CPUs which doesn't support 0xb leaf, where `lp_max` is from
CPUID[0x1].EBX.bits[16-23] and `core_max` is from CPUID[0x4].0x0.bits[26
-31].
The commit 88dd4ca0 changed the encoding rule of `core_max` but didn't
update `lp_max`, so that NetBSD would get the wrong smt information,
which leads to the module loading failure.
Luckily, the commit f985a1195ba2 ("i386/cpu: Fix number of addressable
IDs field for CPUID.01H.EBX[23:16]") updated the encoding rule for
`lp_max` and accidentally fixed the NetBSD issue too. This also shows
that using CPUID[0x1] and CPUID[0x4].0x0 to calculate HT/SMT information
is a common practice to detect CPU topology on legacy Intel CPUs.
Therefore, it's necessary to backport the commit f985a1195ba2 to
previous stable QEMU to help address the similar issues as well. Then
the compat property is not needed any more since all stable QEMUs will
follow the same encoding way.
So, in CPUID[0x1], move addressable ID encoding out of compat property.
Reported-by: Michael Tokarev <mjt@tls.msk.ru>
Inspired-by: Chuang Xu <xuchuangxclwt@bytedance.com>
Fixes: commit f985a1195ba2 ("i386/cpu: Fix number of addressable IDs field for CPUID.01H.EBX[23:16]")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/3061
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Tested-by: Michael Tokarev <mjt@tls.msk.ru>
Message-ID: <20250804053548.1808629-1-zhao1.liu@intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
|
|
Add a test which uses the sifive_u machine to boot a Linux
kernel from a SD card connected via a SPI interface.
Inspired from the command provided in:
- https://lore.kernel.org/qemu-devel/94b2c5bf-53d0-4c74-8264-f3021916f38c@roeck-us.net/
- https://lore.kernel.org/qemu-devel/840016d0-0d49-4ef4-8372-b62b3bcd0ac6@codethink.co.uk/
Inspired-by: Guenter Roeck <linux@roeck-us.net>
Inspired-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250804133406.17456-12-philmd@linaro.org>
|
|
SD card mode is a superset of its state (SDState::state),
no need to migrate it.
Use sd_mode() to get the SDCardModes from the SDCardStates.
Fixes: 50a5be6c3d5 ("hw/sd.c: add SD card save/load support")
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250804133406.17456-11-philmd@linaro.org>
|
|
The card should be in STANDBY mode to process SEND_CSD or SEND_CID,
but is still in IDLE mode.
Unfortunately I don't have enough time to keep debugging this issue,
so disable the check for the time being and the next release, as it
blocks Linux. I'll keep looking.
Reported-by: Guenter Roeck <linux@roeck-us.net>
Reported-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250804133406.17456-10-philmd@linaro.org>
|
|
spi_cmd_SEND_CSD() and spi_cmd_SEND_CID() are very
similar. Factor the common code as spi_cmd_SEND_CxD().
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250804133406.17456-9-philmd@linaro.org>
|
|
In SPI mode, SWITCH_FUNCTION is valid in all mode
(except the IDLE one).
Fixes: 775616c3ae8 ("Partial SD card SPI mode support")
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250804133406.17456-8-philmd@linaro.org>
|
|
While spi_cmd_SEND_OP_COND() is incomplete, sd_cmd_SEND_OP_COND()
is, except it doesn't return the correct value in SPI mode.
Correct and use, removing the need for spi_cmd_SEND_OP_COND().
Fixes: 775616c3ae8 ("Partial SD card SPI mode support")
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250804133406.17456-7-philmd@linaro.org>
|
|
In SPI mode, R2 is a 2-byte value.
Implement in spi_response_r2_make() and
return SPI R2 in the SEND_STATUS commands.
Reported-by: Guenter Roeck <linux@roeck-us.net>
Fixes: 775616c3ae8 ("Partial SD card SPI mode support")
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250804133406.17456-6-philmd@linaro.org>
|
|
ssi-sd.c contains the SPI link layer adaptation,
while sd.c contains all the SD card internal details.
We already handle the response values in sd.c, but
missed the SPI case. Complete them (fill R1, prepend
R1 in R3/R7 and always return something in SPI mode).
Remove all the duplication in ssi-sd.c.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250804133406.17456-5-philmd@linaro.org>
|
|
We provide to sdbus_do_command() a pointer to a buffer to be
filled with a varying number of bytes. By not providing the
buffer size, the callee can not check the buffer is big enough.
Pass the buffer size as argument to follow good practices.
sdbus_do_command() doesn't return any error, only the size filled
in the buffer. Convert the returned type to unsigned and remove
the few unreachable lines in callers.
This allow to check for possible overflow in sd_do_command().
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250804133406.17456-4-philmd@linaro.org>
|
|
Set @rsplen once before switching to fill the response buffer.
This will allow to assert in a single place that the buffer is
big enough to be filled with the response.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20250804133406.17456-3-philmd@linaro.org>
|
|
Unfortunately when adding sd_cmd_to_sendingdata() in commit
f486bf7d109 we neglected to return any possible error. Fix.
Fixes: f486bf7d109 ("hw/sd/sdcard: Introduce sd_cmd_to_sendingdata and sd_generic_read_byte")
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20250804133406.17456-2-philmd@linaro.org>
|
|
It turns out you can't easily expand an ENV var across multiple steps
in a dockerfile. This meant we silently dropped the architectures we
should have even on amd64 hosts. As the updated AVAILABLE_COMPILERS is
only needed for the following apt install line just merge them.
Fixes: 6da616bb170 (tests/docker: handle host-arch selection for all-test-cross)
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-ID: <20250804104308.250949-1-alex.bennee@linaro.org>
|
|
In commit bd0da3a3d4f we changed make-release so that instead of
cloning every git submodule of EDK2 we only cloned a fixed list.
The original motivation for this was that one of the submodules:
* was from a non-github repo
* that repo had a "SSL certificate expired" failure
* wasn't actually needed for the set of EDK2 binaries we build
and at the time we were trying to build the EDK2 binaries in one of
our CI jobs.
Unfortunately this change meant that we were exposed to bugs where
EDK2 adds a new submodule and the sources we ship in the release
tarball won't build any more. In particular, in EDK2 commit
c6bb7d54beb05 the MipiSysTLib submodule was added, causing failure of
the ROM build in our tarball starting from QEMU release 8.2.0:
/tmp/qemu-10.0.0/roms/edk2/MdePkg/MdePkg.dec(32): error 000E: File/directory not found in workspace
Library/MipiSysTLib/mipisyst/library/include is not found in packages path:
/tmp/qemu-10.0.0/roms/.
/tmp/qemu-10.0.0/roms/edk2
(Building from a QEMU git checkout works fine.)
In the intervening time EDK2 moved the submodule that had a problem
to be one they mirrored themselves (and at time of writing all their
submodules are hosted on github), and we stopped trying to build
EDK2 binaries in our own CI jobs with commit 690ceb71936f9037f6.
Go back to cloning every EDK2 submodule, so we don't have an
untested explicit list of submodules which will break without
our noticing it.
This increases the size of the QEMU tarball .tar.xz file from
133M to 139M in my testing.
Cc: qemu-stable@nongnu.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/3041
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Message-ID: <20250721153341.2910800-1-peter.maydell@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
|
|
Add a section about b4, an actively maintained and widely packaged CLI
tool for contributing to patch-based development projects.
Reviewed-by: Gustavo Romero <gustavo.romero@linaro.org>
Signed-off-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Message-ID: <20250717-docs_add_b4_section-v2-1-69212ed39299@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
|
|
On AST1030, reading the FMC_WDT2 register always returns 0xFFFFFFFF.
This issue is due to the aspeed_smc_read function, which checks for the
ASPEED_SMC_FEATURE_WDT_CONTROL feature. Since AST1030 was missing this
feature flag, the read operation fails and returns -1.
To resolve this, add the WDT_CONTROL feature to AST1030's feature set
so that FMC_WDT2 can be correctly accessed by firmware.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Fixes: 2850df6a81bcdc2e063dfdd56751ee2d11c58030 ("aspeed/smc: Add AST1030 support ")
Link: https://lore.kernel.org/qemu-devel/20250804014633.512737-1-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
|
|
Full changelog since last update (1287b6e42e83) :
Hao Wu (2):
Automatically search for UBOOT location for NPCM8xx images.
Dynamically detects NPCM8XX UBOOT destination and size.
Jamin Lin (5):
Add initial support for AST27x0
ast27x0: Show build date and git version
ast27x0: Initialize and enable SSP/TSP using SCU with reserved-memory from DTB
ast27x0: Fix missing SCU module reset for SSP and TSP initialization
ast27x0: Fix Makefile to unconditionally set CC to support correct cross-compilation
Compiled with gcc version 13.3.0
Reviewed-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
|
|
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/3052
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Link: https://lore.kernel.org/qemu-devel/607a943a587248fbe0ff0897de80aee98a093caa.1753654515.git.mjt@tls.msk.ru
[ clg: Removed make CC= workaround ]
Reviewed-by: Jamin Lin <jamin_lin@aspeedtech.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
|
|
Changes:
7b1eb5f ast27x0: Fix Makefile to unconditionally set CC to support correct cross-compilation
601d410 ast27x0: Fix missing SCU module reset for SSP and TSP initialization
80768e4 ast27x0: Initialize and enable SSP/TSP using SCU with reserved-memory from DTB
f8ab635 ast27x0: Show build date and git version
53294f5 Add initial support for AST27x0
b1c2803 Dynamically detects NPCM8XX UBOOT destination and size.
4f54dfc Automatically search for UBOOT location for NPCM8xx images.
The actual bootroms are not updated yet.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Link: https://lore.kernel.org/qemu-devel/2a89ad4c8f5665d07952a4f1749caa6ec0cd3d9c.1753654515.git.mjt@tls.msk.ru
[ clg: Update to latest vbootrom ]
Reviewed-by: Jamin Lin <jamin_lin@aspeedtech.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
|
|
Commit 25aaf0cb7f (“tests/tcg: reduce the number of plugin test
combinations”) added support for running tests with specific plugins
passed via the EXTRA_RUNS variable.
However, due to the optimization, the rules generated as a shuffled
combination of tests and plugins might not cover the rules required to
run the tests with a specific plugin passed via EXTRA_RUNS.
This commit fixes it by correctly generating the rules for the tests
that require a specific plugin to run, which are now passed via the
EXTRA_RUNS_WITH_PLUGIN instead of via the EXTRA_RUNS variable.
The fix essentially excludes the tests passed via EXTRA_RUNS_WITH_PLUGIN
from the rules created by the shuffled combination of tests and plugins,
to avoid running the tests twice, and generates the rules for the
test/plugin combinations listed in the EXTRA_RUNS_WITH_PLUGIN variable.
Signed-off-by: Gustavo Romero <gustavo.romero@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Tested-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-id: 20250801001305.2352554-1-gustavo.romero@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
The code to handle setting SVE registers via the gdbstub is broken:
* it sets each pair of elements in the zregs[].d[] array in the
wrong order for the most common (little endian) case: the least
significant 64-bit value comes first
* it makes no attempt to handle target_endian()
* it does a simple copy out of the (target endian) gdbstub buffer
into the (host endan) zregs data structure, which is wrong on
big endian hosts
Fix all these problems:
* use ldq_p() to read from the gdbstub buffer
* check target_big_endian() to see if we need to handle the
128-bit values the opposite way around
Cc: qemu-stable@nongnu.org
Signed-off-by: Vacha Bhavsar <vacha.bhavsar@oss.qualcomm.com>
Message-id: 20250722173736.2332529-3-vacha.bhavsar@oss.qualcomm.com
[PMM: adjusted commit message, fixed spacing]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
In the code for allowing the gdbstub to set the value of an AArch64
FP/SIMD register, we weren't accounting for target_big_endian()
being true. This meant that for aarch64_be-linux-user we would
set the two halves of the FP register the wrong way around.
The much more common case of a little-endian guest is not affected;
nor are big-endian hosts.
Correct the handling of this case.
Cc: qemu-stable@nongnu.org
Signed-off-by: Vacha Bhavsar <vacha.bhavsar@oss.qualcomm.com>
Message-id: 20250722173736.2332529-2-vacha.bhavsar@oss.qualcomm.com
[PMM: added comment, expanded commit message, fixed missing space]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
In commit 655659a74a we fixed some bugs in the encoding of the
Debug Communications Channel registers, including that we were
incorrectly exposing an AArch32 register at p14, 3, c0, c5, 0.
Unfortunately removing a register is a break of forwards migration
compatibility for TCG, because we will fail the migration if the
source QEMU passes us a cpreg which the destination QEMU does not
have. We don't have a mechanism for saying "it's OK to ignore this
sysreg in the inbound data", so for the 10.1 release reinstate the
incorrect AArch32 register.
(We probably have had other cases in the past of breaking migration
compatibility like this, but we didn't notice because we didn't test
and in any case not that many people care about TCG migration
compatibility. KVM migration compat is not affected because for KVM
we treat the kernel as the source of truth for what system registers
are present.)
Fixes: 655659a74a36b ("target/arm: Correct encoding of Debug Communications Channel registers")
Reported-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20250731134338.250203-1-peter.maydell@linaro.org
|
|
In framebuffer_update_display(), Coverity complains because we
multiply two values of type 'int' (which will be done as a 32x32
multiply and so in theory might overflow) and then add the result to
a ram_addr_t, which can be 64 bits.
4GB framebuffers are not plausible anyway, but keep Coverity happy
by adding casts which force these multiplies to be done as 64x64.
Coverity: CID 1487248
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Message-id: 20250710174312.1313177-1-peter.maydell@linaro.org
|
|
KVM's userspace access interface to the GICD enable and active bits
is via set/clear register pairs which implement the hardware's "write
1s to the clear register to clear the 0 bits, and write 1s to the set
register to set the 1 bits" semantics. We didn't get this right,
because we were writing 0 to the clear register.
Writing 0 to GICD_IC{ENABLE,ACTIVE}R architecturally has no effect on
interrupt status (all writes are simply ignored by KVM) and doesn't
comply with the intention of "first write to the clear-reg to clear
all bits".
Write all 1's to actually clear the enable/active status.
This didn't have any adverse effects on migration because there
we start with a clean VM state; it would be guest-visible when
doing a system reset, but since Linux always cleans up the
register state of the GIC during bootup before it enables it
most users won't have run into a problem here.
Cc: qemu-stable@nongnu.org
Fixes: 367b9f527bec ("hw/intc/arm_gicv3_kvm: Implement get/put functions")
Signed-off-by: Zenghui Yu <zenghui.yu@linux.dev>
Message-id: 20250729161650.43758-3-zenghui.yu@linux.dev
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
As per the arm-vgic-v3 kernel doc [1]:
Accesses to GICD_ICPENDR register region and GICR_ICPENDR0 registers
have RAZ/WI semantics, meaning that reads always return 0 and writes
are always ignored.
The state behind these registers (both 0 and 1 bits) is written by
writing to the GICD_ISPENDR and GICR_ISPENDR0 registers, unlike
some of the other set/clear register pairs.
Remove the useless writes to ICPENDR registers in kvm_arm_gicv3_put().
[1] https://docs.kernel.org/virt/kvm/devices/arm-vgic-v3.html
Signed-off-by: Zenghui Yu <zenghui.yu@linux.dev>
Message-id: 20250729161650.43758-2-zenghui.yu@linux.dev
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Coverity reported a file descriptor leak (CID 1490785) that happens if
`vhost_vdpa_get_max_queue_pairs()` returns 0, since in that case
net_host_vdpa_init(), which should take ownership of the fd, is never
called.
vhost_vdpa_get_max_queue_pairs() returns 1 if VIRTIO_NET_F_MQ is not
negotiated, or a negative error if the ioctl() fails, or the maximum
number of queue pairs exposed by the device in the config space in the
`max_virtqueue_pairs` field. In the VIRTIO spec we have:
The device MUST set max_virtqueue_pairs to between 1 and 0x8000
inclusive, if it offers VIRTIO_NET_F_MQ.
So, if `vhost_vdpa_get_max_queue_pairs()` returns 0, it's really an
error since the device is violating the VIRTIO spec.
Treat also `queue_pairs == 0` as an error, and jump to the `err` label,
to return a negative value to the caller in any case.
Coverity: CID 1490785
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20250714101156.30024-1-sgarzare@redhat.com>
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Acked-by: Jason Wang <jasowang@redhat.com>
|
|
net/vhost* files should be interesting for vhost maintainers/reviewers.
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20250714102626.34431-1-sgarzare@redhat.com>
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
FreeBSD does both, and this appears to be perfectly valid. The VT-d
spec even talks about the ordering (the status write should be done
first, unsurprisingly).
We certainly shouldn't assert() and abort QEMU if the guest asks for
both.
Fixes: ed7b8fbcfb88 ("intel-iommu: add supports for queued invalidation interface")
Closes: https://gitlab.com/qemu-project/qemu/-/issues/3028
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Message-Id: <0122cbabc0adcc3cf878f5fd7834d8f258c7a2f2.camel@infradead.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Now that HEST table is checked for aarch64, add the current
firmware file.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <e3527be1610b2ef6b20ca2efa025de91a1f1e0a6.1749741085.git.mchehab+huawei@kernel.org>
|
|
Currently, aarch64 can generate a HEST table when loaded with
-machine ras=on. Add support for it.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <9ce77140500ef68cc939d63952c25579f711ea52.1749741085.git.mchehab+huawei@kernel.org>
|