| Commit message (Collapse) | Author | Files | Lines |
|---|
|
These examples require longer explanations or have explanations that
require markup to look reasonable when rendered and so use the longer
form of the ".. qmp-example::" directive.
By using the :annotated: option, the content in the example block is
assumed *not* to be a code block literal and is instead parsed as normal
rST - with the exception that any code literal blocks after `::` will
assumed to be a QMP code literal block.
Note: There's one title-less conversion in this patch that comes along
for the ride because it's part of a larger "Examples" block that was
better to convert all at once.
See commit-5: "docs/qapidoc: create qmp-example directive", for a
detailed explanation of this custom directive syntax.
See commit+1: "qapi: remove "Example" doc section" for a detailed
explanation of why.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240717021312.606116-9-jsnow@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
When an Example section has a brief explanation, convert it to a
qmp-example:: section using the :title: option.
Rule of thumb: If the title can fit on a single line and requires no rST
markup, it's a good candidate for using the :title: option of
qmp-example.
In this patch, trailing punctuation is removed from the title section
for consistent headline aesthetics. In just one case, specifics of the
example are removed to make the title read better.
See commit-4: "docs/qapidoc: create qmp-example directive", for a
detailed explanation of this custom directive syntax.
See commit+2: "qapi: remove "Example" doc section" for a detailed
explanation of why.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240717021312.606116-8-jsnow@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
Use the no-option form of ".. qmp-example::" to convert any Examples
that do not have any form of caption or explanation whatsoever. Note
that in a few cases, example sections are split into two or more
separate example blocks. This is only done stylistically to create a
delineation between two or more logically independent examples.
See commit-3: "docs/qapidoc: create qmp-example directive", for a
detailed explanation of this custom directive syntax.
See commit+3: "qapi: remove "Example" doc section" for a detailed
explanation of why.
Note: an empty "TODO" line was added to announce-self to keep the
example from floating up into the body; this will be addressed more
rigorously in the new qapidoc generator.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-ID: <20240717021312.606116-7-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Markup fixed in one place]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
Add CSS styling for qmp-example directives to increase readability and
consistently style all example blocks.
Signed-off-by: Harmonie Snow <harmonie@gmail.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240717021312.606116-6-jsnow@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
For any code literal blocks inside of a qmp-example directive, apply and
enforce the QMP lexer/highlighter to those blocks.
This way, you won't need to write:
```
.. qmp-example::
:annotated:
Blah blah
.. code-block:: QMP
-> { "lorem": "ipsum" }
```
But instead, simply:
```
.. qmp-example::
:annotated:
Blah blah::
-> { "lorem": "ipsum" }
```
Once the directive block is exited, whatever the previous default
highlight language was will be restored; localizing the forced QMP
lexing to exclusively this directive.
Note, if the default language is *already* QMP, this directive will not
generate and restore redundant highlight configuration nodes. We may
well decide that the default language ought to be QMP for any QAPI
reference pages, but this way the directive behaves consistently no
matter where it is used.
Signed-off-by: John Snow <jsnow@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240717021312.606116-5-jsnow@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
This is a directive that creates a syntactic sugar for creating
"Example" boxes very similar to the ones already used in the bitmaps.rst
document, please see e.g.
https://www.qemu.org/docs/master/interop/bitmaps.html#creation-block-dirty-bitmap-add
In its simplest form, when a custom title is not needed or wanted, and
the example body is *solely* a QMP example:
```
.. qmp-example::
{body}
```
is syntactic sugar for:
```
.. admonition:: Example:
.. code-block:: QMP
{body}
```
When a custom, plaintext title that describes the example is desired,
this form:
```
.. qmp-example::
:title: Defrobnification
{body}
```
Is syntactic sugar for:
```
.. admonition:: Example: Defrobnification
.. code-block:: QMP
{body}
```
Lastly, when Examples are multi-step processes that require non-QMP
exposition, have lengthy titles, or otherwise involve prose with rST
markup (lists, cross-references, etc), the most complex form:
```
.. qmp-example::
:annotated:
This example shows how to use `foo-command`::
{body}
For more information, please see `frobnozz`.
```
Is desugared to:
```
.. admonition:: Example:
This example shows how to use `foo-command`::
{body}
For more information, please see `frobnozz`.
```
Note that :annotated: and :title: options can be combined together, if
desired.
The primary benefit here being documentation source consistently using
the same directive for all forms of examples to ensure consistent visual
styling, and ensuring all relevant prose is visually grouped alongside
the code literal block.
Note that as of this commit, the code-block rST syntax "::" does not
apply QMP highlighting; you would need to use ".. code-block:: QMP". The
very next commit changes this behavior to assume all "::" code blocks
within this directive are QMP blocks.
Signed-off-by: John Snow <jsnow@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240717021312.606116-4-jsnow@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
Factor out the compatibility parser helper into a base class, so it can
be shared by other directives.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240717021312.606116-3-jsnow@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
Doc comments are reference documentation for users of QMP.
SpiceQueryMouseMode's doc comment contains a note explaining why it's
not named SpiceMouseMode: spice/enums.h has it already. Irrelevant
for users of QMP; delete the note.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240711112228.2140606-6-armbru@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
|
|
Doc comments are reference documentation for users of QMP.
SocketAddress's doc comment contains a deprecation note advising
developers to use SocketAddress for new code. Irrelevant for users of
QMP. Move the note out of the doc comment.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240711112228.2140606-5-armbru@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
|
|
When no UUID has been specified, query-uuid returns
{"UUID": "00000000-0000-0000-0000-000000000000"}
The doc comment calls this "a null UUID", which I find less than
clear. RFC 9562 calls it "the nil UUID (all zeroes)", so use that
instead.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240711112228.2140606-4-armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
[Wording improved, commit message adjusted]
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
|
|
CpuInstanceProperties' doc comment describes its members as properties
to be passed to device_add when hot-plugging a CPU.
This was in fact the initial use of this type, with
query-hotpluggable-cpus: letting management applications find out what
properties need to be passed with device_add to hot-plug a CPU.
We've since added other uses: set-numa-node (commit 419fcdec3c1 and
f3be67812c2), and query-cpus-fast (commit ce74ee3dea6). These are not
about device-add.
query-hotpluggable-cpus uses CpuInstanceProperties within
HotpluggableCPU. Lift the documentation related to device-add from
CpuInstanceProperties to HotpluggableCPU.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240711112228.2140606-3-armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
|
|
PciDeviceInfo's doc comment has a note on PciDeviceClass member @desc.
Since the note applies always, not just within PciDeviceInfo, merge it
into PciDeviceClass's description of member @desc.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240711112228.2140606-2-armbru@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
|
|
Commit 8f9a9259d32c added ObjectType member @x-vfio-user-server with
feature unstable, but neglected to explain why it is unstable. Do
that now.
Fixes: 8f9a9259d32c (vfio-user: define vfio-user-server object)
Cc: Elena Ufimtseva <elena.ufimtseva@oracle.com>
Cc: John G Johnson <john.g.johnson@oracle.com>
Cc: Jagannathan Raman <jag.raman@oracle.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240703095310.1242102-1-armbru@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
[Indentation fixed]
|
|
This assumes a specially constructed image:
$ dd if=/dev/zero of=mmc-bootarea.img count=2 bs=1M
$ dd if=u-boot-spl.bin of=mmc-bootarea.img conv=notrunc
$ dd if=u-boot.bin of=mmc-bootarea.img conv=notrunc count=64 bs=1K
$ cat mmc-bootarea.img obmc-phosphor-image.wic > mmc.img
$ truncate --size 16GB mmc.img
For now this still requires a mtd image to load the SPL:
$ qemu-system-arm -M tacoma-bmc -nographic \
-global driver=sd-card,property=emmc,value=true \
-drive file=mmc.img,if=sd,index=2,format=raw
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20240712162719.88165-12-philmd@linaro.org>
|
|
switch operation in mmc cards, updated the ext_csd register to
request changes in card operations. Here we implement similar
sequence but requests are mostly dummy and make no change.
Implement SWITCH_ERROR if the write operation offset goes beyond
length of ext_csd.
Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
[PMD: Convert to SDProto handlers, add trace events]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Tested-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240712162719.88165-11-philmd@linaro.org>
|
|
Avoid hardcoding 1MiB boot size in EXT_CSD_BOOT_MULT,
expose it as 'boot-partition-size' QOM property.
By default, do not use any size. The board is responsible
to set the boot partition size property.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240712162719.88165-10-philmd@linaro.org>
|
|
The parameters mimick a real 4GB eMMC, but it can be set to various
sizes.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
EXT_CSD values from Vincent's patch simplivied for Spec v4.3:
- Remove deprecated keys:
. EXT_CSD_SEC_ERASE_MULT
. EXT_CSD_SEC_TRIM_MULT
- Set some keys to not defined / implemented:
. EXT_CSD_HPI_FEATURES
. EXT_CSD_BKOPS_SUPPORT
. EXT_CSD_SEC_FEATURE_SUPPORT
. EXT_CSD_ERASE_TIMEOUT_MULT
. EXT_CSD_PART_SWITCH_TIME
. EXT_CSD_OUT_OF_INTERRUPT_TIME
- Simplify:
. EXT_CSD_ACC_SIZE (6 -> 1)
16KB of super_page_size -> 512B (BDRV_SECTOR_SIZE)
. EXT_CSD_HC_ERASE_GRP_SIZE (4 -> 1)
. EXT_CSD_HC_WP_GRP_SIZE (4 -> 1)
. EXT_CSD_S_C_VCC[Q] (8 -> 1)
. EXT_CSD_S_A_TIMEOUT (17 -> 1)
. EXT_CSD_CARD_TYPE (7 -> 3)
Dual data rate -> High-Speed mode
- Update:
. EXT_CSD_CARD_TYPE (7 -> 3)
High-Speed MultiMediaCard @ 26MHz & 52MHz
. Performances (0xa -> 0x46)
Class B at 3MB/s. -> Class J at 21MB/s
. EXT_CSD_REV (5 -> 3)
Rev 1.5 (spec v4.41) -> Rev 1.3 (spec v4.3)
- Use load/store API to set EXT_CSD_SEC_CNT
- Remove R/W keys, normally zeroed at reset
. EXT_CSD_BOOT_INFO
Migrate the Modes segment (192 lower bytes) but not the
full EXT_CSD register, see Spec v4.3, chapter 8.4
"Extended CSD register":
The Extended CSD register defines the card properties
and selected modes. It is 512 bytes long. The most
significant 320 bytes are the Properties segment, which
defines the card capabilities and cannot be modified by
the host. The lower 192 bytes are the Modes segment,
which defines the configuration the card is working in.
These modes can be changed by the host by means of the
SWITCH command.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240712162719.88165-9-philmd@linaro.org>
|
|
The JEDEC standards specifies a sleep state where the eMMC won't
answer any command appart from RESET and WAKEUP and go to low power
state. Implement this state and the corresponding command number 5.
Signed-off-by: Luc Michel <luc.michel@amd.com>
Signed-off-by: Francisco Iglesias <francisco.iglesias@amd.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240712162719.88165-8-philmd@linaro.org>
|
|
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Message-Id: <20240712162719.88165-7-philmd@linaro.org>
|
|
The number of blocks is defined in the lower bits [15:0].
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240712162719.88165-6-philmd@linaro.org>
|
|
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240712162719.88165-5-philmd@linaro.org>
|
|
Per the spec v4.3 these commands are mandatory,
but we don't implement them.
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240712162719.88165-4-philmd@linaro.org>
|
|
Tested-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240712162719.88165-3-philmd@linaro.org>
|
|
Since eMMC are soldered on boards, it is not user-creatable.
RCA register is initialized to 0x0001, per spec v4.3,
chapter 8.5 "RCA register":
The default value of the RCA register is 0x0001.
The value 0x0000 is reserved to set all cards into
the Stand-by State with CMD7.
The CSD register is very similar to SD one, except
the version announced is v4.3.
eMMC CID register is slightly different from SD:
- One extra PNM (5 -> 6)
- MDT is only 1 byte (2 -> 1).
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240712162719.88165-2-philmd@linaro.org>
|
|
When ram_block_discard_require() fails, errno is passed to error_setg_errno().
It's a stale value or 0 which is unrelated to ram_block_discard_require().
As ram_block_discard_require() already returns -EBUSY in failure case,
use it as errno for error_setg_errno().
Fixes: 852f0048f3ea ("make guest_memfd require uncoordinated discard")
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-ID: <20240716064213.290696-1-zhenzhong.duan@intel.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
|
|
Don't pass NULL to module_object_class_by_name(), when the interface is
unavailable.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240715114420.2062870-1-marcandre.lureau@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
|
|
Remove dpy_cursor_define_supported() as it brings no benefit today and
it has a few inherent problems.
All graphical displays except egl-headless support cursor composition
without DMA-BUF, and egl-headless is meant to be used in conjunction
with another graphical display, so dpy_cursor_define_supported()
always returns true and meaningless.
Even if we add a new display without cursor composition in the future,
dpy_cursor_define_supported() will be problematic as a cursor display
fix for it because some display devices like virtio-gpu cannot tell the
lack of cursor composition capability to the guest and are unable to
utilize the value the function returns. Therefore, all non-headless
graphical displays must actually implement cursor composition for
correct cursor display.
Another problem with dpy_cursor_define_supported() is that it returns
true even if only some of the display listeners support cursor
composition, which is wrong unless all display listeners that lack
cursor composition is headless.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Phil Dennis-Jordan <phil@philjordan.eu>
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-ID: <20240715-cursor-v3-4-afa5b9492dbf@daynix.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
|
|
Add accelerated cursor composition to ui/cocoa. This does not only
improve performance for display devices that exposes the capability to
the guest according to dpy_cursor_define_supported(), but fixes the
cursor display for devices that unconditionally expects the availability
of the capability (e.g., virtio-gpu).
The common pattern to implement accelerated cursor composition is to
replace the cursor and warp it so that the replaced cursor is shown at
the correct position on the guest display for relative pointer devices.
Unfortunately, ui/cocoa cannot do the same because warping the cursor
position interfers with the mouse input so it uses CALayer instead;
although it is not specialized for cursor composition, it still can
compose images with hardware acceleration.
Co-authored-by: Phil Dennis-Jordan <phil@philjordan.eu>
Tested-by: Phil Dennis-Jordan <phil@philjordan.eu>
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-ID: <20240715-cursor-v3-3-afa5b9492dbf@daynix.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
|
|
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Tested-by: Phil Dennis-Jordan <phil@philjordan.eu>
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240715-cursor-v3-2-afa5b9492dbf@daynix.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
|
|
CGImageCreate | Apple Developer Documentation
https://developer.apple.com/documentation/coregraphics/1455149-cgimagecreate
> The color space is retained; on return, you may safely release it.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Tested-by: Phil Dennis-Jordan <phil@philjordan.eu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240715-cursor-v3-1-afa5b9492dbf@daynix.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
|
|
The transfer size check was originally added to prevent consecutive DMA TI
commands from causing an assert() due to an existing SCSI request being in
progress, but since the last set of updates [*] this is no longer required.
Remove the transfer size check from DMA DATA IN and DATA OUT transfers so
that issuing a DMA TI command when there is no data left to transfer does
not cause an assert() due to an existing SCSI request being in progress.
[*] See commits f3ace75be8..78d68f312a
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2415
Message-ID: <20240713224249.468084-1-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
|
|
This factors the CPU pause function from pause_all_vcpus() into a
new cpu_pause() function, similarly to cpu_resume(). cpu_resume()
is moved to keep it next to cpu_pause().
Cc: Philippe Mathieu-Daudé <philmd@linaro.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-ID: <20240712120247.477133-17-npiggin@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
|
|
The TCGCPUOps::cpu_exec_interrupt hook is currently not mandatory; if
it is left NULL then we treat it as if it had returned false. However
since pretty much every architecture needs to handle interrupts,
almost every target we have provides the hook. The one exception is
Tricore, which doesn't currently implement the architectural
interrupt handling.
Add a "do nothing" implementation of cpu_exec_hook for Tricore,
assert on startup that the CPU does provide the hook, and remove
the runtime NULL check before calling it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240712113949.4146855-1-peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
|
|
load_image_gzipped() does not seem to be used anywhere. Remove it.
Signed-off-by: Ani Sinha <anisinha@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240711072448.32673-1-anisinha@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
|
|
The doc comments for the functions for named GPIO inputs and
outputs had a couple of problems:
* some copy-and-paste errors meant the qdev_connect_gpio_out_named()
doc comment had references to input GPIOs that should be to
output GPIOs
* it wasn't very clear that named GPIOs are arrays and so the
connect functions specify a single GPIO line by giving both
the name of the array and the index within that array
Fix the copy-and-paste errors and slightly expand the text
to say that functions are connecting one line in a named GPIO
array, not a single named GPIO line.
Reported-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240708153312.3109380-1-peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
|
|
Makes the code more comprehensible, matches the datasheet and
the piix4 device model.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240704205854.18537-2-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
|
|
The read() syscall is not guaranteed to return all data from a file. The
default ROM loader implementation currently does not take this into account,
instead failing if all bytes are not read at once. This change loads the ROM
using g_file_get_contents() instead, which correctly reads all data using
multiple calls to read() while also returning the loaded ROM size.
Signed-off-by: Gregor Haas <gregorhaas1997@gmail.com>
Reviewed-by: Xingtao Yao <yaoxt.fnst@fujitsu.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240628182706.99525-1-gregorhaas1997@gmail.com>
[PMD: Use gsize with g_file_get_contents()]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
|
|
This is how the steps are ordered in the manual. EFLAGS.NT is
overwritten after the fact in the saved image.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
This takes care of probing the vaddr range in advance, and is also faster
because it avoids repeated TLB lookups. It also matches the Intel manual
better, as it says "Checks that the current (old) TSS, new TSS, and all
segment descriptors used in the task switch are paged into system memory";
note however that it's not clear how the processor checks for segment
descriptors, and this check is not included in the AMD manual.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
This step is listed in the Intel manual: "Checks that the new task is available
(call, jump, exception, or interrupt) or busy (IRET return)".
The AMD manual lists the same operation under the "Preventing recursion"
paragraph of "12.3.4 Nesting Tasks", though it is not clear if the processor
checks the busy bit in the IRET case.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Add the MMU index to the StackAccess struct, so that it can be cached
or (in the next patch) computed from information that is not in
CPUX86State.
Co-developed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Disconnect mmu index computation from the current pl
as stored in env->hflags.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Link: https://lore.kernel.org/r/20240617161210.4639-2-richard.henderson@linaro.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Interrupts and call gates should use accesses with the DPL as
the privilege level. While computing the applicable MMU index
is easy, the harder thing is how to plumb it in the code.
One possibility could be to add a single argument to the PUSH* macros
for the privilege level, but this is repetitive and risks confusion
between the involved privilege levels.
Another possibility is to pass both CPL and DPL, and adjusting both
PUSH* and POP* to use specific privilege levels (instead of using
cpu_{ld,st}*_data). This makes the code more symmetric.
However, a more complicated but much nicer approach is to use a structure
to contain the stack parameters, env, unwind return address, and rewrite
the macros into functions. The struct provides an easy home for the MMU
index as well.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Link: https://lore.kernel.org/r/20240617161210.4639-4-richard.henderson@linaro.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Do not pre-decrement esp, let the macros subtract the appropriate
operand size.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
This fixes a bug wherein i386/tcg assumed an interrupt return using
the IRET instruction was always returning from kernel mode to either
kernel mode or user mode. This assumption is violated when IRET is used
as a clever way to restore thread state, as for example in the dotnet
runtime. There, IRET returns from user mode to user mode.
This bug is that stack accesses from IRET and RETF, as well as accesses
to the parameters in a call gate, are normal data accesses using the
current CPL. This manifested itself as a page fault in the guest Linux
kernel due to SMAP preventing the access.
This bug appears to have been in QEMU since the beginning.
Analyzed-by: Robert R. Henry <rrh.henry@gmail.com>
Co-developed-by: Robert R. Henry <rrh.henry@gmail.com>
Signed-off-by: Robert R. Henry <rrh.henry@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
This truncation is now handled by MMU_*32_IDX. The introduction of
MMU_*32_IDX in fact applied correct 32-bit wraparound to 16-bit accesses
with a high segment base (e.g. big real mode or vm86 mode), which did
not use SEG_ADDL.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Link: https://lore.kernel.org/r/20240617161210.4639-3-richard.henderson@linaro.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
In long mode, POP to memory will write a full 64-bit value. However,
the call to gen_writeback() in gen_POP will use MO_32 because the
decoding table is incorrect.
The bug was latent until commit aea49fbb01a ("target/i386: use gen_writeback()
within gen_POP()", 2024-06-08), and then became visible because gen_op_st_v
now receives op->ot instead of the "ot" returned by gen_pop_T0.
Analyzed-by: Clément Chigot <chigot@adacore.com>
Fixes: 5e9e21bcc4d ("target/i386: move 60-BF opcodes to new decoder", 2024-05-07)
Tested-by: Clément Chigot <chigot@adacore.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Commit 3787324101b ("hpet: Fix emulation of HPET_TN_SETVAL (Jan Kiszka)",
2009-04-17) applied the fix only to the low 32-bits of the comparator, but
it should be done for the high bits as well. Otherwise, the high 32-bits
of the comparator cannot be written and they remain fixed to 0xffffffff.
Co-developed-by: TaiseiIto <taisei1212@outlook.jp>
Signed-off-by: TaiseiIto <taisei1212@outlook.jp>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
When writing a new period, the clamping should use a maximum value
rather tyhan a bit mask. Also, when writing the high bits new_val
is shifted right by 32, so the maximum allowed period should also
be shifted right.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The description of '-runas' and '-run-with' didn't explain that QEMU
will use setuid/setgid to implement the option, so the user might get
confused if using 'elevateprivileges=deny' as well.
Since '-runas' is going to be deprecated and replaced by '-run-with'
in the coming qemu9.1, add the message there.
Signed-off-by: Boqiao Fu <bfu@redhat.com>
Link: https://lore.kernel.org/r/CAFRHJ6J9uMk+HMZL+W+KE1yoRCOLPgbPUVVDku55sdXYiGXXHg@mail.gmail.com
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|