| Commit message (Collapse) | Author | Files | Lines |
|---|
|
Commit 2943b53f6 (' virtio: force VIRTIO_F_IOMMU_PLATFORM') made sure
that vhost can't just reject VIRTIO_F_IOMMU_PLATFORM when it was
requested. However, just adding it back to the negotiated flags isn't
right either because it promises support to the guest that the device
actually doesn't support. One example of a vhost-user device that
doesn't have support for the flag is the vhost-user-blk export of QEMU.
Instead of successfully creating a device that doesn't work, just fail
to plug the device when it doesn't support the feature, but it was
requested. This results in much clearer error messages.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1935019
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Message-Id: <20210429171316.162022-6-kwolf@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
VIRTIO_F_RING_PACKED and VIRTIO_F_IOMMU_PLATFORM need to be supported by
the vhost device, otherwise advertising it to the guest doesn't result
in a working configuration. They are currently not supported by the
vhost-user-blk export in QEMU.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1935020
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Acked-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Message-Id: <20210429171316.162022-5-kwolf@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Now that vhost_user_blk_connect() is not called from an event handler
any more, but directly from vhost_user_blk_device_realize(), we can
actually make use of Error again instead of calling error_report() in
the inner function and setting a more generic and therefore less useful
error message in realize() itself.
With Error, the callers are responsible for adding context if necessary
(such as the "-device" option the error refers to). Additional prefixes
are redundant and better omitted.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Acked-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Message-Id: <20210429171316.162022-4-kwolf@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
This is a partial revert of commits 77542d43149 and bc79c87bcde.
Usually, an error during initialisation means that the configuration was
wrong. Reconnecting won't make the error go away, but just turn the
error condition into an endless loop. Avoid this and return errors
again.
Additionally, calling vhost_user_blk_disconnect() from the chardev event
handler could result in use-after-free because none of the
initialisation code expects that the device could just go away in the
middle. So removing the call fixes crashes in several places.
For example, using a num-queues setting that is incompatible with the
backend would result in a crash like this (dereferencing dev->opaque,
which is already NULL):
#0 0x0000555555d0a4bd in vhost_user_read_cb (source=0x5555568f4690, condition=(G_IO_IN | G_IO_HUP), opaque=0x7fffffffcbf0) at ../hw/virtio/vhost-user.c:313
#1 0x0000555555d950d3 in qio_channel_fd_source_dispatch (source=0x555557c3f750, callback=0x555555d0a478 <vhost_user_read_cb>, user_data=0x7fffffffcbf0) at ../io/channel-watch.c:84
#2 0x00007ffff7b32a9f in g_main_context_dispatch () at /lib64/libglib-2.0.so.0
#3 0x00007ffff7b84a98 in g_main_context_iterate.constprop () at /lib64/libglib-2.0.so.0
#4 0x00007ffff7b32163 in g_main_loop_run () at /lib64/libglib-2.0.so.0
#5 0x0000555555d0a724 in vhost_user_read (dev=0x555557bc62f8, msg=0x7fffffffcc50) at ../hw/virtio/vhost-user.c:402
#6 0x0000555555d0ee6b in vhost_user_get_config (dev=0x555557bc62f8, config=0x555557bc62ac "", config_len=60) at ../hw/virtio/vhost-user.c:2133
#7 0x0000555555d56d46 in vhost_dev_get_config (hdev=0x555557bc62f8, config=0x555557bc62ac "", config_len=60) at ../hw/virtio/vhost.c:1566
#8 0x0000555555cdd150 in vhost_user_blk_device_realize (dev=0x555557bc60b0, errp=0x7fffffffcf90) at ../hw/block/vhost-user-blk.c:510
#9 0x0000555555d08f6d in virtio_device_realize (dev=0x555557bc60b0, errp=0x7fffffffcff0) at ../hw/virtio/virtio.c:3660
Note that this removes the ability to reconnect during initialisation
(but not during operation) when there is no permanent error, but the
backend restarts, as the implementation was buggy. This feature can be
added back in a follow-up series after changing error paths to
distinguish cases where retrying could help from cases with permanent
errors.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210429171316.162022-3-kwolf@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
We have to set errp before jumping to virtio_err, otherwise the caller
(virtio_device_realize()) will take this as success and crash when it
later tries to access things that we've already freed in the error path.
Fixes: 77542d431491788d1e8e79d93ce10172ef207775
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210429171316.162022-2-kwolf@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Acked-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Exercise input validation code paths in
block/export/vhost-user-blk-server.c.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20210309094106.196911-5-stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210322092327.150720-4-stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20210309094106.196911-4-stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210322092327.150720-3-stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
This test case has the same tests as tests/virtio-blk-test.c except for
tests have block_resize. Since the vhost-user-blk export only serves one
client one time, two exports are started by qemu-storage-daemon for the
hotplug test.
Suggested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Coiby Xu <coiby.xu@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20210309094106.196911-3-stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210322092327.150720-2-stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
The checks in vu_blk_sect_range_ok() assume VIRTIO_BLK_SECTOR_SIZE is
equal to BDRV_SECTOR_SIZE. This is true, but let's add a
QEMU_BUILD_BUG_ON() to make it explicit.
We might as well check that the request buffer size is a multiple of
VIRTIO_BLK_SECTOR_SIZE while we're at it.
Suggested-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20210331142727.391465-1-stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Like other error paths, this one needs to call tran_finalize() and clean
up the BlockReopenQueue, too.
Fixes: CID 1452772
Fixes: 72373e40fbc7e4218061a8211384db362d3e7348
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210503110555.24001-3-kwolf@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
The error path needs to call tran_finalize(), too.
Fixes: CID 1452773
Fixes: 548a74c0dbc858edd1a7ee3045b5f2fe710bd8b1
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-Id: <20210503110555.24001-2-kwolf@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Set bdi->is_dirty, so that qemu-img info could show dirty flag.
After this commit the following check will show '"dirty-flag": true':
./build/qemu-img create -f qcow2 -o lazy_refcounts=on x 1M
./build/qemu-io x
qemu-io> write 0 1M
After "write" command success, kill the qemu-io process:
kill -9 <qemu-io pid>
./build/qemu-img info --output=json x
This will show '"dirty-flag": true' among other things. (before this
commit it shows '"dirty-flag": false')
Note, that qcow2's dirty-bit is not a "dirty bit for the image". It
only protects qcow2 lazy refcounts feature. So, there are a lot of
conditions when qcow2 session may be not closed correctly, but bit is
0. Still, when bit is set, the last session is definitely not finished
correctly and it's better to report it.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210504160656.462836-1-vsementsov@virtuozzo.com>
Tested-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
time element is deprecated on new input_event structure in kernel's
input.h [1]
This will avoid the following build failure:
hw/input/virtio-input-host.c: In function 'virtio_input_host_handle_status':
hw/input/virtio-input-host.c:198:28: error: 'struct input_event' has no member named 'time'
198 | if (gettimeofday(&evdev.time, NULL)) {
| ^
Fixes:
- http://autobuild.buildroot.org/results/a538167e288c14208d557cd45446df86d3d599d5
- http://autobuild.buildroot.org/results/efd4474fb4b6c0ce0ab3838ce130429c51e43bbb
[1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit?id=152194fe9c3f
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Message-Id: <20201203195819.583626-1-fontaine.fabrice@gmail.com>
Fixes: https://gitlab.com/qemu-project/qemu/-/issues/246
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
As it's only used inside hw/virtio/vhost-vdpa.c.
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Message-Id: <20210413133737.1574-1-yuzenghui@huawei.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
This patch adds ioeventfd flag for virtio-mmio configuration.
It allows switching ioeventfd on and off.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Message-Id: <161700379211.1135943.8859209566937991305.stgit@pasha-ThinkPad-X280>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Type 41 defines the attributes of devices that are onboard. The
original intent was to imply the BIOS had some level of control over
the enablement of the associated devices.
If network devices are present in this table, by default, udev will
name the corresponding interfaces enoX, X being the instance number.
Without such information, udev will fallback to using the PCI ID and
this usually gives ens3 or ens4. This can be a bit annoying as the
name of the network card may depend on the order of options and may
change if a new PCI device is added earlier on the commande line.
Being able to provide SMBIOS type 41 entry ensure the name of the
interface won't change and helps the user guess the right name without
booting a first time.
This can be invoked with:
$QEMU -netdev user,id=internet
-device virtio-net-pci,mac=50:54:00:00:00:42,netdev=internet,id=internet-dev \
-smbios type=41,designation='Onboard LAN',instance=1,kind=ethernet,pcidev=internet-dev
The PCI segment is assumed to be 0. This should hold true for most
cases.
$ dmidecode -t 41
# dmidecode 3.3
Getting SMBIOS data from sysfs.
SMBIOS 2.8 present.
Handle 0x2900, DMI type 41, 11 bytes
Onboard Device
Reference Designation: Onboard LAN
Type: Ethernet
Status: Enabled
Type Instance: 1
Bus Address: 0000:00:09.0
$ ip -brief a
lo UNKNOWN 127.0.0.1/8 ::1/128
eno1 UP 10.0.2.14/24 fec0::5254:ff:fe00:42/64 fe80::5254:ff:fe00:42/64
Signed-off-by: Vincent Bernat <vincent@bernat.ch>
Message-Id: <20210401171138.62970-1-vincent@bernat.ch>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
checkfilename() doesn't always set $acpi_testexpected. Fix the following
warning:
Use of uninitialized value $acpi_testexpected in string eq at
./scripts/checkpatch.pl line 1529.
Fixes: d2f1af0e4120 ("checkpatch: don't emit warning on newly created acpi data files")
Cc: isaku.yamahata@intel.com
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <161786467973.295167.5612704777283969903.stgit@bahia.lan>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
This allows the virtio-scsi-pci device to batch the setup of all its
host notifiers. This significantly improves boot time of VMs with a
high number of vCPUs, e.g. from 6m5.563s down to 1m2.884s for a
pseries machine with 384 vCPUs.
Note that memory_region_transaction_commit() must be called before
virtio_bus_cleanup_host_notifier() because the latter might close
ioeventfds that the transaction still assumes to be around when it
commits.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <20210407143501.244343-5-groug@kaod.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Host notifiers are guaranteed to be idle until the callbacks are
hooked up with virtio_queue_aio_set_host_notifier_handler(). They
thus don't need to be set or unset with the AioContext lock held.
Do this outside the critical section, like virtio-blk already
does : basically downgrading virtio_scsi_vring_init() to only
setup the host notifier and set the callback in the caller.
This will allow to batch addition/deletion of ioeventds in
a single memory transaction, which is expected to greatly
improve initialization time.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <20210407143501.244343-4-groug@kaod.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
This allows the virtio-blk-pci device to batch the setup of all its
host notifiers. This significantly improves boot time of VMs with a
high number of vCPUs, e.g. from 3m26.186s down to 0m58.023s for a
pseries machine with 384 vCPUs.
Note that memory_region_transaction_commit() must be called before
virtio_bus_cleanup_host_notifier() because the latter might close
ioeventfds that the transaction still assumes to be around when it
commits.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <20210407143501.244343-3-groug@kaod.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
When dataplane multiqueue support was added in QEMU 2.7, the path
that would rollback guest notifiers assignment in case of error
simply got dropped.
Later on, when Error was added to blk_set_aio_context() in QEMU 4.1,
another error path was introduced, but it ommits to rollback both
host and guest notifiers.
It seems cleaner to fix the rollback path in one go. The patch is
simple enough that it can be adjusted if backported to a pre-4.1
QEMU.
Fixes: 51b04ac5c6a6 ("virtio-blk: dataplane multiqueue support")
Cc: stefanha@redhat.com
Fixes: 97896a4887a0 ("block: Add Error to blk_set_aio_context()")
Cc: kwolf@redhat.com
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20210407143501.244343-2-groug@kaod.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
The get_vmstate_memory_region() method from PCDIMMDeviceClass is only
ever called from this class and is never overridden, so it can be converted
into an ordinary function.
This saves us from having to do an indirect call in order to reach it.
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Message-Id: <f42da25471dc4b967796642388294e61e6587047.1619303649.git.maciej.szmigiero@oracle.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Address was swapped with value when writing MMIO registers, so the user
saw garbage in lot of cases. The interrupt status was not correctly set.
Signed-off-by: Roman Kapl <rka@sysgo.com>
Message-Id: <20210427110504.10878-1-rka@sysgo.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
"qemu/typedefs.h" is enough for include/block/write-threshold.h header
with forward declaration of BlockDriverState. Also drop extra includes
from block/write-threshold.c and tests/unit/test-write-threshold.c
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210506090621.11848-9-vsementsov@virtuozzo.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
We don't need this extra logic: it doesn't make code simpler.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210506090621.11848-8-vsementsov@virtuozzo.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
Testing set/get of one 64bit variable doesn't seem necessary. We have a
lot of such variables. Also remaining tests do test set/get anyway.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210506090621.11848-7-vsementsov@virtuozzo.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
bdrv_write_threshold_exceeded() is unused.
bdrv_write_threshold_is_set() is used only to double check the value of
bs->write_threshold_offset in tests. No real sense in it (both tests do
check real value with help of bdrv_write_threshold_get())
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210506090621.11848-5-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
[mreitz: Adjusted commit message as per Eric's suggestion]
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
These tests use bdrv_write_threshold_exceeded() API, which is used only
for test (since pre-previous commit). Better is testing real API, which
is used in block.c as well.
So, let's call bdrv_write_threshold_check_write(), and check is
bs->write_threshold_offset cleared or not (it's cleared iff threshold
triggered).
Also we get rid of BdrvTrackedRequest use here. Note, that paranoiac
bdrv_check_request() calls were added in 8b1170012b1 to protect
BdrvTrackedRequest. Drop them now.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210506090621.11848-4-vsementsov@virtuozzo.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
They are unused now.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210506090621.11848-3-vsementsov@virtuozzo.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
write-notifiers are used only for write-threshold. New code for such
purpose should create filters.
Let's better special-case write-threshold and drop write notifiers at
all. (Actually, write-threshold is special-cased anyway, as the only
user of write-notifiers)
So, create a new direct interface for bdrv_co_write_req_prepare() and
drop all write-notifier related logic from write-threshold.c.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20210506090621.11848-2-vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
[mreitz: Adjusted comment as per Eric's suggestion]
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
pylint 2.8 introduces consider-using-with error, suggesting
to use the 'with' block statement when possible.
Modify all subprocess.Popen call to use the 'with' statement,
except the one in __init__ of QemuIoInteractive class, since
it is assigned to a class field and used in other methods.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20210510190449.65948-1-eesposit@redhat.com>
[mreitz: Disable bad-option-value warning in the iotests' pylintrc, so
that disabling consider-using-with in QemuIoInteractive will
not produce a warning in pre-2.8 pylint versions]
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
Now, after huge update of block graph permission update algorithm, we
don't need this workaround with active state of the filter. Drop it and
use new smart bdrv_drop_filter() function.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210506194143.394141-1-vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
The contents of this patch were initially developed and posted by Han
Han[1], however, it appears the original patch was not applied. Since
then, the relevant documentation has been moved and adapted to a new
format.
I've taken most of the original wording and tweaked it according to
some of the feedback from the original patch submission. I've also
adapted it to restructured text, which is the format the documentation
currently uses.
[1] https://lists.nongnu.org/archive/html/qemu-block/2019-10/msg01253.html
Fixes: https://bugzilla.redhat.com/1763105
Signed-off-by: Han Han <hhan@redhat.com>
Suggested-by: Max Reitz <mreitz@redhat.com>
[ Max: provided description of data_file_raw behavior ]
Signed-off-by: Connor Kuehl <ckuehl@redhat.com>
Message-Id: <20210505195512.391128-1-ckuehl@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
Due to a typo, in this case the SOCK_DIR was not being created.
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Tested-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20210323181928.311862-6-pbonzini@redhat.com>
Message-Id: <20210503110110.476887-6-pbonzini@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
Right now there is no easy way for "check" to print a reproducer command.
Because such a reproducer command line would be huge, we can instead teach
check to start a command of our choice. This can be for example a Python
unit test with arguments to only run a specific subtest.
Move the trailing empty line to print_env(), since it always looks better
and one caller was not adding it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Tested-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20210323181928.311862-5-pbonzini@redhat.com>
Message-Id: <20210503110110.476887-5-pbonzini@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
TestEnv
In the next patch, "check" will learn how to execute a test script without
going through TestRunner. To enable this, keep only the text output
and subprocess handling in the TestRunner; move into TestEnv the logic
to prepare for running a subprocess.
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Tested-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20210323181928.311862-4-pbonzini@redhat.com>
Message-Id: <20210503110110.476887-4-pbonzini@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
Python test scripts that use unittest consist of multiple tests.
unittest.main allows selecting which tests to run, but currently this
is not possible because the iotests wrapper ignores sys.argv.
unittest.main command line options also allow the user to pick the
desired options for verbosity, failfast mode, etc. While "-d" is
currently translated to "-v", it also enables extra debug output,
and other options are not available at all.
These command line options only work if the unittest.main testRunner
argument is a type, rather than a TestRunner instance. Therefore, pass
the class name and "verbosity" argument to unittest.main, and adjust for
the different default warnings between TextTestRunner and unittest.main.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Tested-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20210323181928.311862-3-pbonzini@redhat.com>
Message-Id: <20210503110110.476887-3-pbonzini@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
Instead of buffering the test output into a StringIO, patch it on
the fly by wrapping sys.stdout's write method. This can be
done unconditionally, even if using -d, which makes execute_unittest
a bit simpler.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Tested-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20210323181928.311862-2-pbonzini@redhat.com>
Message-Id: <20210503110110.476887-2-pbonzini@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
If mirror is READY than cancel operation is not discarding the whole
result of the operation, but instead it's a documented way get a
point-in-time snapshot of source disk.
So, we should not cancel any requests if mirror is READ and
force=false. Let's fix that case.
Note, that bug that we have before this commit is not critical, as the
only .bdrv_cancel_in_flight implementation is nbd_cancel_in_flight()
and it cancels only requests waiting for reconnection, so it should be
rare case.
Fixes: 521ff8b779b11c394dbdc43f02e158dd99df308a
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210421075858.40197-1-vsementsov@virtuozzo.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
Max reported the following bug:
$ ./qemu-img create -f raw src.img 1G
$ ./qemu-img create -f raw dst.img 1G
$ (echo '
{"execute":"qmp_capabilities"}
{"execute":"blockdev-mirror",
"arguments":{"job-id":"mirror",
"device":"source",
"target":"target",
"sync":"full",
"filter-node-name":"mirror-top"}}
'; sleep 3; echo '
{"execute":"human-monitor-command",
"arguments":{"command-line":
"qemu-io mirror-top \"write 0 1G\""}}') \
| x86_64-softmmu/qemu-system-x86_64 \
-qmp stdio \
-blockdev file,node-name=source,filename=src.img \
-blockdev file,node-name=target,filename=dst.img \
-object iothread,id=iothr0 \
-device virtio-blk,drive=source,iothread=iothr0
crashes:
0 raise () at /usr/lib/libc.so.6
1 abort () at /usr/lib/libc.so.6
2 error_exit
(err=<optimized out>,
msg=msg@entry=0x55fbb1634790 <__func__.27> "qemu_mutex_unlock_impl")
at ../util/qemu-thread-posix.c:37
3 qemu_mutex_unlock_impl
(mutex=mutex@entry=0x55fbb25ab6e0,
file=file@entry=0x55fbb1636957 "../util/async.c",
line=line@entry=650)
at ../util/qemu-thread-posix.c:109
4 aio_context_release (ctx=ctx@entry=0x55fbb25ab680) at ../util/async.c:650
5 bdrv_do_drained_begin
(bs=bs@entry=0x55fbb3a87000, recursive=recursive@entry=false,
parent=parent@entry=0x0,
ignore_bds_parents=ignore_bds_parents@entry=false,
poll=poll@entry=true) at ../block/io.c:441
6 bdrv_do_drained_begin
(poll=true, ignore_bds_parents=false, parent=0x0, recursive=false,
bs=0x55fbb3a87000) at ../block/io.c:448
7 blk_drain (blk=0x55fbb26c5a00) at ../block/block-backend.c:1718
8 blk_unref (blk=0x55fbb26c5a00) at ../block/block-backend.c:498
9 blk_unref (blk=0x55fbb26c5a00) at ../block/block-backend.c:491
10 hmp_qemu_io (mon=0x7fffaf3fc7d0, qdict=<optimized out>)
at ../block/monitor/block-hmp-cmds.c:628
man pthread_mutex_unlock
...
EPERM The mutex type is PTHREAD_MUTEX_ERRORCHECK or
PTHREAD_MUTEX_RECURSIVE, or the mutex is a robust mutex, and the
current thread does not own the mutex.
So, thread doesn't own the mutex. And we have iothread here.
Next, note that AIO_WAIT_WHILE() documents that ctx must be acquired
exactly once by caller. But where is it acquired in the call stack?
Seems nowhere.
qemuio_command do acquire aio context.. But we need context acquired
around blk_unref() as well and actually around blk_insert_bs() too.
Let's refactor qemuio_command so that it doesn't acquire aio context
but callers do that instead. This way we can cleanly acquire aio
context in hmp_qemu_io() around all three calls.
Reported-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20210423134233.51495-1-vsementsov@virtuozzo.com>
[mreitz: Fixed comment]
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
Sometimes the parser needs to further split a token it has collected
from the token input stream. Right now, it does a cursory check to see
if the relevant characters appear in the token to determine if it should
break it down further.
However, qemu_rbd_next_tok() will escape characters as it removes tokens
from the token stream and plain strchr() won't. This can make the
initial strchr() check slightly misleading since it implies
qemu_rbd_next_tok() will find the token and split on it, except the
reality is that qemu_rbd_next_tok() will pass over it if it is escaped.
Use a custom strchr to avoid mixing escaped and unescaped string
operations. Furthermore, this code is identical to how
qemu_rbd_next_tok() seeks its next token, so incorporate this custom
strchr into the body of that function to reduce duplication.
Reported-by: Han Han <hhan@redhat.com>
Fixes: https://bugzilla.redhat.com/1873913
Signed-off-by: Connor Kuehl <ckuehl@redhat.com>
Message-Id: <20210421212343.85524-3-ckuehl@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
The deprecation message in the expected output has technically been
wrong since the wrong version of a patch was applied to it. Because of
this, the test fails. Correct the expected output so that it passes.
Signed-off-by: Connor Kuehl <ckuehl@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20210421212343.85524-2-ckuehl@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210511104157.2880306-4-philmd@redhat.com>
|
|
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210511104157.2880306-3-philmd@redhat.com>
|
|
The VirtIOFeature structure isn't modified, mark it const.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210511104157.2880306-2-philmd@redhat.com>
|
|
The MSYS2 task in the Cirrus-CI is currently failing with error messages
like this:
warning: database file for 'ucrt64' does not exist (use '-Sy' to download)
:: Starting core system upgrade...
there is nothing to do
:: Starting full system upgrade...
error: failed to prepare transaction (could not find database)
Seems like it can be fixed by switching to a newer release and by refreshing
the database one more time after changing the /etc/pacman.conf file.
Message-Id: <20210504100223.25427-30-alex.bennee@linaro.org>
Reviewed-by: Yonggang Luo <luoyonggang@gmail.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
|
The default "alabaster" sphinx theme has a couple shortcomings:
- the navbar moves along the page
- the search bar is not always at the same place
- it lacks some contrast and colours
The "rtd" theme from readthedocs.org is a popular third party theme used
notably by the kernel, with a custom style sheet. I like it better,
perhaps others do too. It also simplifies the "Edit on Gitlab" links.
Tweak a bit the custom theme to match qemu.org style, use the
QEMU logo, and favicon etc.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
Message-Id: <20210323115328.4146052-1-marcandre.lureau@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
|
|
Clang versions before v11.0 insist on having the %rX or %cX register
names instead of just a number. Since our Travis-CI is currently
still using Clang v6.0, we have to fix this to avoid failing jobs.
Message-Id: <20210512171550.476130-2-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
|
Coverity notices that several places in the migration-test code fail
to free memory in error-exit paths. This is pretty unimportant in
test case code, but we can avoid having to manually free the memory
entirely by using g_autofree.
The places where Coverity spotted a leak were relating to early exits
not freeing 'uri' in test_precopy_unix(), do_test_validate_uuid(),
migrate_postcopy_prepare() and test_migrate_auto_converge(). This
patch converts all the string-allocation in the test code to
g_autofree for consistency.
Fixes: Coverity CID 1432313, 1432315, 1432352, 1432364
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20210506185819.9010-1-peter.maydell@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
|
We are generating a lot of target-specific defines in the *-config-devices.h
and *-config-target.h files. Using them in common code is wrong and leads
to very subtle bugs since a "#ifdef CONFIG_SOMETHING" is not working there
as expected. To avoid these issues, we are already poisoning many of the
macros in include/exec/poison.h - but it's cumbersome to maintain this
list manually. Thus let's generate an additional list of poisoned macros
automatically from the current config switches - this should give us a
much better test coverage via the different CI configurations.
Note that CONFIG_TCG (which is also defined in config-host.h) and
CONFIG_USER_ONLY are special, so we have to filter these out.
Message-Id: <20210414112004.943383-5-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
|