| Commit message (Collapse) | Author | Files | Lines |
|---|
|
In the dm163-test and stm32l4x5_usart-test, a couple of subtests are
missing the qtest_quit() call. The effect of this is that on hosts
other than Linux and FreeBSD the test will timeout after executing
all the tests:
242/845 qemu:qtest+qtest-arm / qtest-arm/dm163-test TIMEOUT 60.04s 3 subtests passed
100/845 qemu:qtest+qtest-arm / qtest-arm/stm32l4x5_usart-test TIMEOUT 600.02s 5 subtests passed
This happens because the qemu-system-arm binary which the test
starts does not exit, and because it shares the stdout with the
test binary, the overall meson test harness thinks the test is
still running. On Linux and FreeBSD we have an extra safety net
set up in qtest_spawn_qemu() which kills off any QEMU binary that
ends up without a parent. This is intended for the case where
QEMU crashed and didn't respond to a SIGTERM or polite request
to quit, but it also sidestepped the problem in this case.
However, OpenBSD doesn't have a PDEATHSIG equivalent, so we
see the timeouts when running a 'make vm-build-openbsd' run.
Add the missing qtest_quit() calls.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20240905165554.320577-2-peter.maydell@linaro.org
|
|
New test function "ufstest_query_desc_request" added, which can check one's
virtual UFS device can properly read and its descriptor data.
(Writing descriptors are not implemented yet.)
The testcases attempt to read all kinds of descriptors at least once,
except for configuration descriptors (which are not implemented yet.)
There are some testcases that are intended to make an error caused by
an invalid index value or an invalid selector value.
Signed-off-by: Yoochan Jeong <yc01.jeong@samsung.com>
Reviewed-by: Jeuk Kim <jeuk20.kim@samsung.com>
Signed-off-by: Jeuk Kim <jeuk20.kim@samsung.com>
|
|
New test function "ufstest_query_attr_request" added, which can check one's
virtual UFS device can properly read and write its attribute data.
It tests if reading and writing attributes work properly. There are
some testcases that are intended to make an error caused by writing an
invalid value, allocating an invalid selector and permission issues.
Signed-off-by: Yoochan Jeong <yc01.jeong@samsung.com>
Reviewed-by: Jeuk Kim <jeuk20.kim@samsung.com>
Signed-off-by: Jeuk Kim <jeuk20.kim@samsung.com>
|
|
New test function "ufstest_flag_request" added, which can check one's
virtual UFS device can properly read and write its flag data. It tests
if reading, setting, clearing and toggling flags work properly. There
are some testcases that are intended to make an error caused by
permission issues.
Signed-off-by: Yoochan Jeong <yc01.jeong@samsung.com>
Reviewed-by: Jeuk Kim <jeuk20.kim@samsung.com>
Signed-off-by: Jeuk Kim <jeuk20.kim@samsung.com>
|
|
Minor bugs and errors related to ufs-test are resolved. Some
permissions and code implementations that are not synchronized
with the ufs spec are edited.
Signed-off-by: Yoochan Jeong <yc01.jeong@samsung.com>
Reviewed-by: Jeuk Kim <jeuk20.kim@samsung.com>
Signed-off-by: Jeuk Kim <jeuk20.kim@samsung.com>
|
|
Modify to fill the opcode, idn, index, selector information of
all Query Response UPIU. because attr and flag operation of query
response upiu need these information too.
Signed-off-by: KyoungrulKim <k831.kim@samsung.com>
Reviewed-by: Minwoo Im <minwoo.im@samsung.com>
Reviewed-by: Jeuk Kim <jeuk20.kim@samsung.com>
Signed-off-by: Jeuk Kim <jeuk20.kim@samsung.com>
|
|
memory_region_find() returns an MR which it is the caller's
responsibility to unref, but platform_bus_map_mmio() was
forgetting to do so, thus leaking the MR.
Signed-off-by: Gao Shiyuan <gaoshiyuan@baidu.com>
Message-id: 20240829131005.9196-1-gaoshiyuan@baidu.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: tweaked commit message]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
If the file is not an ELF file, arm_setup_direct_kernel_boot()
falls back to try it as a uimage or an AArch64 Image file or as
last resort a bare raw binary. We can discard load_elf_hdr()
error and silently return.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240903144154.17135-1-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Print errors before exit. Do not exit silently.
Cc: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Changbin Du <changbin.du@huawei.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240903133940.3447430-1-changbin.du@huawei.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
The system supports the Security Extensions (core and GIC). This change is
necessary to run tests which pass on the real hardware.
Signed-off-by: Sebastian Huber <sebastian.huber@embedded-brains.de>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Tested-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Message-id: 20240828005019.57705-1-sebastian.huber@embedded-brains.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
In vfp.decode we have the names of the VFNMA and VFNMS instructions
the wrong way around. The architecture says that bit 6 is the 'op'
bit, which is 1 for VFNMA and 0 for VFNMS, but we label these two
lines of decode the other way around. This doesn't cause any
user-visible problem because in the handling of these functions in
translate-vfp.c we give VFNMA the behaviour specified for VFNMS and
vice-versa, but it's confusing when reading the code.
Switch the names of the VFP VFNMA and VFNMS instructions in
the decode file and flip the behaviour also.
NB: the instructions VFMA and VFMS *are* decoded with op=0 for
VFMA and op=1 for VFMS; the confusion probably arose because
we assumed VFNMA and VFNMS to be the same way around.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2536
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240830152156.2046590-1-peter.maydell@linaro.org
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
|
|
In sbsa_fdt_add_gic_node() we g_strdup_printf() two nodename
strings, but only free one.
Since the string is actually entirely constant and we don't
make any use of printf's format-string operations, we can
drop the g_strdup_printf() use entirely.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Message-id: 20240822162323.706382-1-peter.maydell@linaro.org
|
|
The TYPE_XLNX_VERSAL_EFUSE_CTRL device creates a register block with
register_init_block32() in its instance_init method; we must
therefore destroy it in our instance_finalize method to avoid a leak
in the QOM introspection "init-inspect-finalize" lifecycle:
Direct leak of 304 byte(s) in 1 object(s) allocated from:
#0 0x55f222b5b9d8 in __interceptor_calloc (/mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/qemu-system-aarch64+0x294e9d8) (BuildId: 420
43d49e1139e3f3071b1f22fac1e3e7249c9a6)
#1 0x7fbb10669c50 in g_malloc0 debian/build/deb/../../../glib/gmem.c:161:13
#2 0x55f222f90c5d in register_init_block hw/core/register.c:248:34
#3 0x55f222f916be in register_init_block32 hw/core/register.c:299:12
#4 0x55f223bbdd15 in efuse_ctrl_init hw/nvram/xlnx-versal-efuse-ctrl.c:718:9
#5 0x55f225b23391 in object_init_with_type qom/object.c:420:9
#6 0x55f225b0a66b in object_initialize_with_type qom/object.c:562:5
#7 0x55f225b0bf0d in object_new_with_type qom/object.c:782:5
#8 0x55f225b0bfe1 in object_new qom/object.c:797:12
#9 0x55f226309e0d in qmp_device_list_properties qom/qom-qmp-cmds.c:144:11
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Francisco Iglesias <francisco.iglesias@amd.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20240822162127.705879-7-peter.maydell@linaro.org
|
|
The TYPE_XLNX_VERSAL_TRNG device creates a register block with
register_init_block32() in its instance_init method; we must
therefore destroy it in our instance_finalize method to avoid a leak
in the QOM introspection "init-inspect-finalize" lifecycle:
Direct leak of 304 byte(s) in 1 object(s) allocated from:
#0 0x55842ec799d8 in __interceptor_calloc (/mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/qemu-system-aarch64+0x294e9d8) (BuildId: 47496e53f3e779f1c7e9b82cbea07407152b498b)
#1 0x7fe793c75c50 in g_malloc0 debian/build/deb/../../../glib/gmem.c:161:13
#2 0x55842f0aec5d in register_init_block hw/core/register.c:248:34
#3 0x55842f0af6be in register_init_block32 hw/core/register.c:299:12
#4 0x55842f801588 in trng_init hw/misc/xlnx-versal-trng.c:614:9
#5 0x558431c411a1 in object_init_with_type qom/object.c:420:9
#6 0x558431c2847b in object_initialize_with_type qom/object.c:562:5
#7 0x558431c29d1d in object_new_with_type qom/object.c:782:5
#8 0x558431c29df1 in object_new qom/object.c:797:12
#9 0x558432427c1d in qmp_device_list_properties qom/qom-qmp-cmds.c:144:11
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Francisco Iglesias <francisco.iglesias@amd.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20240822162127.705879-6-peter.maydell@linaro.org
|
|
The TYPE_XLNX_ZYNQMP_EFUSE device creates a register block with
register_init_block32() in its instance_init method; we must
therefore destroy it in our instance_finalize method to avoid a leak
in the QOM introspection "init-inspect-finalize" lifecycle:
Direct leak of 304 byte(s) in 1 object(s) allocated from:
#0 0x55f3ff5839d8 in __interceptor_calloc (/mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/qemu-system-aarch64+0x294d9d8) (BuildId: 23cf931c66865a71b6cc4da95156d03bc106fa72)
#1 0x7f3f31c6bc50 in g_malloc0 debian/build/deb/../../../glib/gmem.c:161:13
#2 0x55f3ff9b8c5d in register_init_block hw/core/register.c:248:34
#3 0x55f3ff9b96be in register_init_block32 hw/core/register.c:299:12
#4 0x55f4005e5b25 in efuse_ctrl_init hw/nvram/xlnx-versal-efuse-ctrl.c:718:9
#5 0x55f40254afb1 in object_init_with_type qom/object.c:420:9
#6 0x55f40253228b in object_initialize_with_type qom/object.c:562:5
#7 0x55f402533b2d in object_new_with_type qom/object.c:782:5
#8 0x55f402533c01 in object_new qom/object.c:797:12
#9 0x55f402d31a2d in qmp_device_list_properties qom/qom-qmp-cmds.c:144:11
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Francisco Iglesias <francisco.iglesias@amd.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20240822162127.705879-5-peter.maydell@linaro.org
|
|
The TYPE_XLNX_BBRAM device creates a register block with
register_init_block32() in its instance_init method; we must
therefore destroy it in our instance_finalize method to avoid a leak
in the QOM introspection "init-inspect-finalize" lifecycle:
Direct leak of 304 byte(s) in 1 object(s) allocated from:
#0 0x5641518ca9d8 in __interceptor_calloc (/mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/qemu-system-aarch64+0x294d9d8) (BuildId: 4a6
18cb63d57d5a19ed45cfc262b08da47eaafe5)
#1 0x7ff1aab31c50 in g_malloc0 debian/build/deb/../../../glib/gmem.c:161:13
#2 0x564151cffc5d in register_init_block hw/core/register.c:248:34
#3 0x564151d006be in register_init_block32 hw/core/register.c:299:12
#4 0x56415293df75 in bbram_ctrl_init hw/nvram/xlnx-bbram.c:462:9
#5 0x564154891dc1 in object_init_with_type qom/object.c:420:9
#6 0x56415487909b in object_initialize_with_type qom/object.c:562:5
#7 0x56415487a93d in object_new_with_type qom/object.c:782:5
#8 0x56415487aa11 in object_new qom/object.c:797:12
#9 0x56415507883d in qmp_device_list_properties qom/qom-qmp-cmds.c:144:11
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Francisco Iglesias <francisco.iglesias@amd.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20240822162127.705879-4-peter.maydell@linaro.org
|
|
The TYPE_XLNX_VERSAL_TRNG device creates s->prng with g_rand_new()
in its init method, but it frees it in its unrealize method. This
results in a leak in the QOM introspection "initialize-inspect-finalize"
lifecycle:
Direct leak of 2500 byte(s) in 1 object(s) allocated from:
#0 0x55ec89eae9d8 in __interceptor_calloc (/mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/qemu-system-aarch64+0x294d9d8) (BuildId: 6d5
08874816cc47d17c8dd775e8f809ae520e8cb)
#1 0x7f697018fc50 in g_malloc0 debian/build/deb/../../../glib/gmem.c:161:13
#2 0x7f6970197738 in g_rand_new_with_seed_array debian/build/deb/../../../glib/grand.c:202:17
#3 0x7f6970197816 in g_rand_new debian/build/deb/../../../glib/grand.c:286:10
#4 0x55ec8aa3656a in trng_init hw/misc/xlnx-versal-trng.c:624:15
#5 0x55ec8ce75da1 in object_init_with_type qom/object.c:420:9
#6 0x55ec8ce5d07b in object_initialize_with_type qom/object.c:562:5
#7 0x55ec8ce5e91d in object_new_with_type qom/object.c:782:5
#8 0x55ec8ce5e9f1 in object_new qom/object.c:797:12
#9 0x55ec8d65c81d in qmp_device_list_properties qom/qom-qmp-cmds.c:144:11
Move the free to finalize so it matches where we are initing
s->prng. Since that's the only thing our unrealize method was
doing, this essentially switches the whole function to be
a finalize implementation.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Francisco Iglesias <francisco.iglesias@amd.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20240822162127.705879-3-peter.maydell@linaro.org
|
|
Since the TYPE_XNLX_VERSAL_CFU_FDRO device creates a FIFO in its
instance_init method, we must destroy the FIFO in instance_finalize
to avoid a memory leak for the QOM introspection
"instantiate-examine-finalize" cycle:
Direct leak of 8192 byte(s) in 1 object(s) allocated from:
#0 0x55ec89eae7ee in malloc (/mnt/nvmedisk/linaro/qemu-from-laptop/qemu/build/asan/qemu-system-aarch64+0x294d7ee) (BuildId: 6d508874816cc47d17c8dd775e8f809ae520e8cb)
#1 0x7f697018f738 in g_malloc debian/build/deb/../../../glib/gmem.c:128:13
#2 0x55ec8d98d98d in fifo8_create util/fifo8.c:27:18
#3 0x55ec8aa2a624 in fifo32_create /mnt/nvmedisk/linaro/qemu-from-laptop/qemu/include/qemu/fifo32.h:35:5
#4 0x55ec8aa2a33c in cfu_fdro_init hw/misc/xlnx-versal-cfu.c:397:5
#5 0x55ec8ce75da1 in object_init_with_type qom/object.c:420:9
#6 0x55ec8ce5d07b in object_initialize_with_type qom/object.c:562:5
#7 0x55ec8ce5e91d in object_new_with_type qom/object.c:782:5
#8 0x55ec8ce5e9f1 in object_new qom/object.c:797:12
#9 0x55ec8d65c81d in qmp_device_list_properties qom/qom-qmp-cmds.c:144:11
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Francisco Iglesias <francisco.iglesias@amd.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20240822162127.705879-2-peter.maydell@linaro.org
|
|
Now that our SMMU model supports enabling both stages of translation
at once, we can enable this in the sbsa-ref board. Existing guest
code that only programs stage 1 and doesn't care about stage 2 should
continue to run with the same behaviour, but guests that do want to
do nested SMMU configurations can now do so.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Message-id: 20240816161350.3706332-5-peter.maydell@linaro.org
|
|
Now that our SMMU model supports enabling both stages of translation
at once, we can enable this in the virt board. This is no change in
behaviour for guests, because if they simply ignore stage 2 and never
configure it then it has no effect. For the usual backwards
compatibility reasons we enable this only for machine types starting
with 9.2.
(Note that the SMMU is disabled by default on the virt board and is
only created if the user passes the 'iommu=smmuv3' machine option.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20240816161350.3706332-4-peter.maydell@linaro.org
|
|
When we added support for nested (stage 1 + stage 2) translation
to the SMMU in commit 58377c363291d we forgot to update the
comment that documents the valid values of the "stage" property.
Add the new "nested" value to it.
Fixes: 58377c363291d ("hw/arm/smmuv3: Support and advertise nesting")
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20240816161350.3706332-3-peter.maydell@linaro.org
|
|
Add 9.2 machine types for arm/i440fx/m68k/q35/s390x/spapr.
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20240816161350.3706332-2-peter.maydell@linaro.org
Message-id: 20240816103723.2325982-1-cohuck@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
The main loop in rr_cpu_thread_fn() can never terminate, so the
code at the end of the function to clean up the RCU subsystem is
dead code. Replace it with g_assert_not_reached().
(This is different from the other cpu_thread_fn for e.g. MTTCG or
for the KVM accelerator -- those can exit, if the vCPU they
are responsible for is unplugged. But the RR cpu thread fn
handles all CPUs in the system in a round-robin way, so even
if one is unplugged it keeps looping.)
Resolves: Coverity CID 1547782
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240815143634.3413679-1-peter.maydell@linaro.org
|
|
Now that we've implemented the required behaviour for FEAT_EBF16, we
can enable it for the "max" CPU type, list it in our documentation,
and delete a TODO comment about it being missing.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
|
|
Implement the FPCR.EBF=1 semantics for bfdotadd() operations:
* is_ebf() sets up fpst and fpst_odd
* bfdotadd_ebf() implements the fused paired-multiply-and-add
operation that we need
The paired-multiply-and-add is similar to f16_dotadd() and
we use the same trick here as in that function, but the inputs
here are bfloat16 rather than float16.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
|
|
We use bfdotadd() in four callsites for various helper functions. Currently
this all assumes that we have the FPCR.EBF=0 semantics. For FPCR.EBF=1
we will need to:
* call a different routine to bfdotadd() because we need to do a
fused multiply-add rather than separate multiply and add steps
* use a different float_status that honours the FPCR rounding mode
and denormal-flushing fields
* pass in an extra float_status that has been set up to perform
round-to-odd rounding
To prepare for this, refactor all the callsites so that instead of
for (...) {
x = bfdotadd(...);
}
they are:
float_status fpst, fpst_odd;
if (is_ebf(env, &fpst, &fpst_odd)) {
for (...) {
x = bfdotadd_ebf(..., &fpst, &fpst_odd);
}
} else {
for (...) {
x = bfdotadd(..., &fpst);
}
}
For the moment the is_ebf() function always returns false, sets up
fpst for EBF=0 semantics and never sets up fpst_odd; bfdotadd_ebf()
will assert if called. We'll fill in the handling for EBF=1 in the
next commit.
This change should be a zero-behaviour-change refactor.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
|
|
Pass the env pointer through to the gvec_bfmmla helper,
so we can use it to add support for FEAT_EBF16.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
|
|
Pass the env pointer through to the gvec_bfdot_idx helper,
so we can use it to add support for FEAT_EBF16.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
|
|
Pass the env pointer through to the gvec_bfdot helper,
so we can use it to add support for FEAT_EBF16.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
|
|
To implement the FEAT_EBF16 semantics, we are going to need
the CPUARMState env pointer in every helper function which calls
bfdotadd().
Pass the env pointer through from generated code to the sme_bfmopa
helper. (We'll add the code that uses it when we've adjusted
all the helpers to have access to the env pointer.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
|
|
FEAT_EBF16 adds one new bit to the FPCR floating point control
register. Allow this bit to be read and written when the ID
registers indicate the presence of the feature.
Note that because this new bit is not in FPSCR_FPCR_MASK the bit is
not visible in the AArch32 FPSCR, and FPSCR writes do not affect it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
|
|
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
|
|
Add a Xen PVH x86 machine based on the abstract PVH Machine.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
|
|
Add support for optionally creating a PCIe/GPEX controller.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
|
|
We've been creating the virtio-mmio devices in forwards order
but since the qbus lists prepend (rather than append) entries,
the virtio busses end up with decreasing base address order.
Xen enables virtio-mmio nodes in forwards order so there's been
a missmatch. So far, we've been working around this with an
out-of-tree patch to Xen.
This reverses the order making sure the virtio busses end up
ordered with increasing base addresses avoiding the need to
patch Xen.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
|
|
Rename xen_arm.c -> xen-pvh.c to better express that this
is a PVH machine and to align with x86 HVM and future PVH
machine filenames:
hw/i386/xen/xen-hvm.c
hw/i386/xen/xen-pvh.c (in preparation)
No functional changes.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
|
|
Break out a common Xen PVH machine in preparation for
adding a x86 Xen PVH machine.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
|
|
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
|
|
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
|
|
Add SMP support for Xen PVH ARM guests.
Create ms->smp.max_cpus ioreq servers to handle hotplug.
Note that ms->smp.max_cpus will be passed to us by the
user (Xen tools) set to the guests maxvcpus.
The value in mc->max_cpus is an absolute maximum for the
-smp option and won't be used to setup ioreq servers unless
the user explicitly specifies it with -smp.
If the user doesn't pass -smp on the command-line, smp.cpus
and smp.max_cpus will default to 1.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
|
|
Tweak machine description to better express that this is
a Xen PVH machine for ARM.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
|
|
Update file header to use SPDX and remove stray empty
comment line.
No functional changes.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
|
|
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
|
|
Document the new functional testing framework. The text is originally
based on the Avocado documentation, but heavily modified to match the
new framework.
Message-ID: <20240830133841.142644-45-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
|
The avocado_qemu.Test class has been renamed a while back in commit
2283b627bc ("tests/avocado: Rename avocado_qemu.Test -> QemuSystemTest"),
so we should reflect this now in the documentation, too.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20240830133841.142644-44-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
|
The main testing documentation file got very overloaded already.
Thus let's split the Avocado information into a separate file.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20240830133841.142644-43-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
|
Building and testing are two separate topics, so let's split the testing
into a separate category and move the related files into a separate folder.
Message-ID: <20240830133841.142644-42-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
|
Now that we converted many tests from the "check-avocado" test suite
to the "check-functional" test suite, we should make sure that these
also get tested in the CI.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240830133841.142644-41-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
|
The single test that was using the QemuUserTest class
has been converted to the functional test framework.
This class is now unused, remove it.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240822104238.75045-4-philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240830133841.142644-40-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
|
Straight forward conversion. Update the SHA1 hashes to
SHA256 hashes since SHA1 should not be used anymore nowadays.
Expose cpio_extract() in qemu_test.utils for possible reuse.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240822104238.75045-3-philmd@linaro.org>
[thuth: Add test to meson.build]
Message-ID: <20240830133841.142644-39-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
|