| Commit message (Collapse) | Author | Files | Lines |
|---|
|
Move the write_boot_rom helper from hw/arm/aspeed.c into
hw/arm/aspeed_soc_common.c so it can be reused by all ASPEED
machines. Export the API as aspeed_write_boot_rom() in
include/hw/arm/aspeed_soc.h and update the existing call site
to use the new helper.
No functional change.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250925050535.2657256-3-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
|
|
Relocate aspeed_board_init_flashes() from hw/arm/aspeed.c into
hw/arm/aspeed_soc_common.c so the helper can be reused by all
ASPEED machines. The API was already declared in
include/hw/arm/aspeed_soc.h; this change moves its
implementation out of the machine file to keep aspeed.c cleaner.
No functional change.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250925050535.2657256-2-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
|
|
Extend the AST2600 functional tests with PCIe and network checks.
This patch introduces a new helper "do_ast2600_pcie_test()" that runs "lspci"
on the emulated system and verifies the presence of the expected PCIe devices:
- 80:00.0 Host bridge: ASPEED Technology, Inc. Device 2600
- 80:08.0 PCI bridge: ASPEED Technology, Inc. AST1150 PCI-to-PCI Bridge
- 81:00.0 Ethernet controller: Intel Corporation 82574L Gigabit Network Connection
To exercise the PCIe network device, the test adds:
-device e1000e,netdev=net1,bus=pcie.0
-netdev user,id=net1
and assigns an IP address to the interface, verifying it with `ip addr`.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250919093017.338309-14-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
|
|
Add PCIe Root Complex support to the AST2700 SoC model.
The AST2700 A1 silicon revision provides three PCIe Root Complexes:
PCIe0 with its PHY at 0x12C15000, config (H2X) block at 0x120E0000,
MMIO window at 0x60000000, and GIC IRQ 56.
PCIe1 with its PHY at 0x12C15800, config (H2X) block at 0x120F0000,
MMIO window at 0x80000000, and GIC IRQ 57.
PCIe2 with its PHY at 0x14C1C000, config (H2X) block at 0x140D0000,
MMIO window at 0xA0000000, and IRQ routed through INTC4 bit 31
mapped to GIC IRQ 196.
Each RC instantiates a PHY device, a PCIe config (H2X) bridge, and an MMIO
alias region. The per-RC MMIO alias size is 0x20000000. The AST2700 A0
silicon revision does not support PCIe Root Complexes, so pcie_num is set
to 0 in that variant.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250919093017.338309-13-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
|
|
AST2700
AST2700 does not implement a PCIe Root Device; each RC exposes a single
PCIe Root Port at devfn 0:0.0.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250919093017.338309-12-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
|
|
Introduce PCIe config (H2X) support for the AST2700 SoC.
Unlike the AST2600, the AST2700 provides three independent Root Complexes,
each with its own H2X (AHB to PCIe bridge) register block of size 0x100.
All RCs use the same MSI address (0x000000F0). The H2X block includes
two different access paths:
1. CFGI (internal bridge): used to access the host bridge itself, always
with BDF=0. The AST2700 controller simplifies the design by exposing
only one register (H2X_CFGI_TLP) with fields for ADDR[15:0], BEN[19:16],
and WR[20]. This is not a full TLP descriptor as in the external case.
For QEMU readability and code reuse, the model converts H2X_CFGI_TLP
into a standard TLP TX descriptor with BDF forced to 0 and then calls
the existing helpers aspeed_pcie_cfg_readwrite() and
aspeed_pcie_cfg_translate_write().
2. CFGE (external EP access): used to access external endpoints. The
AST2700 design provides H2X_CFGE_TLP1 and a small FIFO at H2X_CFGE_TLPN.
For reads, TX DESC0 is stored in TLP1 and DESC1/DESC2 in TLPN FIFO
slots. For writes, TX DESC0 is stored in TLP1, DESC1/DESC2 in TLPN
FIFO[0..1], and TX write data in TLPN FIFO[2].
The implementation extends AspeedPCIECfgState with a small FIFO and index,
wires up new register definitions for AST2700, and adds a specific ops
table and class (TYPE_ASPEED_2700_PCIE_CFG). The reset handler clears the
FIFO state. Interrupt and MSI status registers are also supported.
This provides enough modeling for firmware and drivers to use any of the
three PCIe RCs on AST2700 with their own dedicated H2X config window,
while reusing existing TLP decode helpers in QEMU.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250919093017.338309-11-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
|
|
Introduce a PCIe Host Controller PHY model for AST2700. This adds an
AST2700 specific PHY type (TYPE_ASPEED_2700_PCIE_PHY) with a 0x800 byte
register space and link-status bits compatible with the firmware’s
expectations.
AST2700 provides three PCIe RCs; PCIe0 and PCIe1 are GEN4, PCIe2 is
GEN2. The PHY exposes:
PEHR_2700_LINK_GEN2 at 0x344, bit 18 indicates GEN2 link up
PEHR_2700_LINK_GEN4 at 0x358, bit 8 indicates GEN4 link up
In real hardware these GEN2/GEN4 link bits are mutually exclusive.
QEMU does not model GEN2 vs GEN4 signaling differences, so the reset
handler sets both bits to 1. This keeps the model simple and lets
firmware see the link as up; firmware will read the appropriate
register per RC port to infer the intended mode.
The header gains TYPE_ASPEED_2700_PCIE_PHY; the new class derives from
TYPE_ASPEED_PCIE_PHY, sets nr_regs to 0x800 >> 2, and installs an
AST2700 reset routine that programs the class code (0x06040011) and the
GEN2/GEN4 status bits.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250919093017.338309-10-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
|
|
Wire up the PCIe Root Complex in the AST2600 SoC model.
According to the AST2600 firmware driver, only the RC_H controller is
supported. RC_H uses PCIe PHY1 at 0x1e6ed200 and the PCIe config (H2X)
register block at 0x1e770000. The RC_H MMIO window is mapped at
0x70000000–0x80000000. RC_L is not modeled. The RC_H interrupt is
wired to IRQ 168. Only RC_H is realized and connected to the SoC
interrupt controller.
The SoC integration initializes PCIe PHY1, instantiates a single RC
instance, wires its MMIO regions, and connects its interrupt. An alias
region is added to map the RC MMIO space into the guest physical address
space.
This provides enough functionality for firmware and guest drivers to
discover and use the AST2600 RC_H Root Complex while leaving RC_L
unimplemented.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250919093017.338309-9-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
|
|
Add PCIe controller and PHY instances to the Aspeed SoC state and device
enum. This prepares the SoC model to host PCIe Root Complexes and their
associated PHYs.
Although the AST2600 supports only a single Root Complex, the AST2700
provides three Root Complexes. For this reason, the model defines arrays
of three PCIe config/PHY objects and enumerates three PCIe device IDs so
that both SoCs can be represented consistently.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250919093017.338309-8-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
|
|
Add MSI support to the ASPEED PCIe RC/Config model and introduce a per-RC
"IOMMU root" address space to correctly route MSI writes.
On AST2700 all RCs use the same MSI address, and the MSI target is PCI
system memory (not normal DRAM). If the MSI window were mapped into real
system RAM, an endpoint's write could be observed by other RCs and
spuriously trigger their interrupts. To avoid this, each RC now owns an
isolated IOMMU root AddressSpace that contains a small MSI window and a
DRAM alias region for normal DMA.
The MSI window captures writes and asserts the RC IRQ. MSI status bits
are tracked in new H2X RC_H registers (R_H2X_RC_H_MSI_EN{0,1} and
R_H2X_RC_H_MSI_STS{0,1}). Clearing all status bits drops the IRQ. The
default MSI address is set to 0x1e77005c and can be overridden via the
msi-addr property.
This keeps MSI traffic contained within each RC while preserving normal
DMA to system DRAM. It enables correct MSI/MSI-X interrupt delivery when
multiple RCs use the same MSI target address.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250919093017.338309-7-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
|
|
Introduce an ASPEED PCIe Root Port and wire it under the RC. The root port
is modeled as TYPE_ASPEED_PCIE_ROOT_PORT (subclass of TYPE_PCIE_ROOT_PORT).
Key changes:
- Add TYPE_ASPEED_PCIE_ROOT_PORT (PCIESlot-based) with vendor/device IDs
and AER capability offset.
- Extend AspeedPCIERcState to embed a root_port instance and a
configurable rp_addr.
- Add "rp-addr" property to the RC to place the root port at a specific
devfn on the root bus.
- Set the root port's "chassis" property to ensure a unique chassis per RC.
- Extend AspeedPCIECfgClass with rc_rp_addr defaulting to PCI_DEVFN(8,0).
Rationale:
- AST2600 places the root port at 80:08.0 (bus 0x80, dev 8, fn 0).
- AST2700 must place the root port at 00:00.0, and it supports three RCs.
Each root port must therefore be uniquely identifiable; uses the
PCIe "chassis" ID for that.
- Providing a configurable "rp-addr" lets platforms select the correct
devfn per SoC family, while the "chassis" property ensures uniqueness
across multiple RC instances on AST2700.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250919093017.338309-6-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
|
|
Introduce a PCIe Root Device for AST2600 platform.
The AST2600 root complex exposes a PCIe root device at bus 80, devfn 0.
This root device is implemented as a child of the PCIe RC and modeled
as a host bridge PCI function (class_id = PCI_CLASS_BRIDGE_HOST).
Key changes:
- Add a new device type "aspeed.pcie-root-device".
- Instantiate the root device as part of AspeedPCIERcState.
- Initialize it during RC realize() and attach it to the root bus.
- Mark the root device as non-user-creatable.
- Add RC boolean property "has-rd" to control whether the Root Device is
created (platforms can enable/disable it as needed).
Note: Only AST2600 implements this PCIe root device. AST2700 does not
provide one.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250919093017.338309-5-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
|
|
Introduce PCIe config and host bridge model for the AST2600 platform.
This patch adds support for the H2X (AHB to PCIe Bus Bridge) controller
with a 0x100 byte register space. The register layout is shared between
two root complexes: 0x00–0x7f is common, 0x80–0xbf for RC_L, and 0xc0–0xff
for RC_H. Only RC_H is modeled in this implementation.
The RC_H bus uses bus numbers in the 0x80–0xff range instead of the
standard root bus 0x00. To allow the PCI subsystem to discover devices,
the host bridge logic remaps the root bus number back to 0x00 whenever the
configured bus number matches the "bus-nr" property.
New MMIO callbacks are added for the H2X config space:
- aspeed_pcie_cfg_read() and aspeed_pcie_cfg_write() handle register
accesses.
- aspeed_pcie_cfg_readwrite() provides configuration read/write support.
- aspeed_pcie_cfg_translate_write() handles PCIe byte-enable semantics for
write operations.
The reset handler initializes the H2X register block with default values
as defined in the AST2600 datasheet.
Additional changes:
- Implement ASPEED PCIe root complex (TYPE_ASPEED_PCIE_RC).
- Wire up interrupt propagation via aspeed_pcie_rc_set_irq().
- Add tracepoints for config read/write and INTx handling.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250919093017.338309-4-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
|
|
This patch introduces an initial ASPEED PCIe PHY/host controller model to
support the AST2600 SoC. It provides a simple register block with MMIO
read/write callbacks, integration into the build system, and trace events
for debugging.
Key changes:
1. PCIe PHY MMIO read/write callbacks
Implemented aspeed_pcie_phy_read() and aspeed_pcie_phy_write() to
handle 32-bit register accesses.
2. Build system and Kconfig integration
Added CONFIG_PCI_EXPRESS_ASPEED in hw/pci-host/Kconfig and meson
rules.
Updated ASPEED_SOC in hw/arm/Kconfig to imply PCI_DEVICES and select
PCI_EXPRESS_ASPEED.
3. Trace events for debug
New tracepoints aspeed_pcie_phy_read and aspeed_pcie_phy_write allow
monitoring MMIO accesses.
4. Register space and defaults (AST2600 reference)
Expose a 0x100 register space, as documented in the AST2600 datasheet.
On reset, set default values:
PEHR_ID: Vendor ID = ASPEED, Device ID = 0x1150
PEHR_CLASS_CODE = 0x06040006
PEHR_DATALINK = 0xD7040022
PEHR_LINK: bit[5] set to 1 to indicate link up.
This provides a skeleton device for the AST2600 platform. It enables
firmware to detect the PCIe link as up by default and allows future
extension.
This commit is the starting point of the series to introduce ASPEED PCIe
Root Complex (RC) support. Based on previous work from Cédric Le Goater,
the following commits in this series extend and refine the implementation:
- Add a PCIe Root Port so that devices can be attached without requiring an
extra bridge.
- Restrict the Root Port device instantiation to the AST2600 platform.
- Integrate aspeed_cfg_translate_write() to support both AST2600 and AST2700.
- Add MSI support and a preliminary RC IOMMU address space.
- Fix issues with MSI interrupt clearing.
- Extend support to the AST2700 SoC.
- Drop the AST2600 RC_L support.
- Introduce PCIe RC functional tests covering both AST2600 and AST2700.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250919093017.338309-3-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
|
|
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250919093017.338309-2-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
|
|
Add a functional test that boots an AST2600 machine with a generated
OTP image. The test verifies that OTP contents are read during early
boot and that the system reaches the expected console prompt.
Signed-off-by: Kane-Chen-AS <kane_chen@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250917035917.4141723-4-kane_chen@aspeedtech.com
[ clg: checkpath fixes ]
Signed-off-by: Cédric Le Goater <clg@redhat.com>
|
|
Add a functional test that boots an AST1030 machine with a generated
OTP image. The test verifies that OTP contents are read during early
boot and that the system reaches the expected console prompt.
Signed-off-by: Kane-Chen-AS <kane_chen@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250917035917.4141723-3-kane_chen@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
|
|
Add a small helper that generates OTP images at test time. This lets
multiple test cases create default OTP contents without shipping prebuilt
fixtures and keeps the tests self-contained.
Signed-off-by: Kane-Chen-AS <kane_chen@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250917035917.4141723-2-kane_chen@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
|
|
This patch moves the "ast2700-evb" alias from the A0 to A1.
The A0 machine remains available via its explicit name
("ast2700a0-evb"), while functional tests are updated to
target A0 by name instead of relying on the generic alias.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250902062550.3797040-1-jamin_lin@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
|
|
Add documentation for the OTP memory module used by AST2600 and AST1030
SoCs, and describe options for using a pre-generated image or an
internal buffer. Include example commands for configuration and image
generation.
Signed-off-by: Kane-Chen-AS <kane_chen@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250812094011.2617526-11-kane_chen@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
|
|
Extend OTP command handling to recognize specific voltage mode register
addresses and emulate the expected hardware behavior. Without this
change, legitimate voltage mode change requests would be incorrectly
reported as "Unknown command" and logged as an error.
This implementation does not perform actual mode changes, but ensures
that valid requests are accepted and ignored as per hardware behavior.
Signed-off-by: Kane-Chen-AS <kane_chen@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250812094011.2617526-9-kane_chen@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
|
|
The OTP space contains three types of entries: data, conf, and strap.
Data entries consist of two DWORDs, while the other types contain
only one DWORD. This change adds the R_CAMP2 register (0x024 / 4) to
store the second DWORD when reading from the OTP data region.
With this enhancement, OTP reads now correctly return both DWORDs for
data entries via the CAMP registers, along with improved address
validation and error handling.
Signed-off-by: Kane-Chen-AS <kane_chen@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250812094011.2617526-8-kane_chen@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
|
|
The has_otp attribute is enabled in the SBC subclasses for AST1030 to
control the presence of OTP support per SoC type.
Signed-off-by: Kane-Chen-AS <kane_chen@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250812094011.2617526-7-kane_chen@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
|
|
Implement correct OTP programming behavior for Aspeed OTP:
- Support read-modify-write flow with one-way bit programming:
* prog_bit uses 0s as the "to-be-programmed" mask.
* Even-indexed words: 0->1, odd-indexed words: 1->0.
* Reject non-programmable requests and log conflicts.
- Enable unaligned accesses in MemoryRegionOps.
Since each OTP address maps to a 1DW (4B) or 2DW (8B) block in the
backing store, upper-layer accesses may be unaligned to block
boundaries.
This matches the irreversible, word-parity-dependent programming rules
of Aspeed SoCs and exposes changes via QEMU trace events.
Signed-off-by: Kane-Chen-AS <kane_chen@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250812094011.2617526-6-kane_chen@aspeedtech.com
[ clg: Fixed PRIx64 format in aspeed_otp_write() ]
Signed-off-by: Cédric Le Goater <clg@redhat.com>
|
|
This patch introduces a 'drive' property to the Aspeed OTP device,
allowing it to be backed by a block device. Users can now preload
OTP data via QEMU CLI using a block backend.
Example usage:
./qemu-system-arm \
-blockdev driver=file,filename=otpmem.img,node-name=otp \
-global aspeed-otp.drive=otp \
...
If the drive is provided, its content will be loaded as the initial OTP
state. Otherwise, an internal memory buffer will be used.
Signed-off-by: Kane-Chen-AS <kane_chen@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250812094011.2617526-5-kane_chen@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
|
|
The has_otp attribute is enabled in the SBC subclasses for AST2600 to
control the presence of OTP support per SoC type.
Signed-off-by: Kane-Chen-AS <kane_chen@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250812094011.2617526-4-kane_chen@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
|
|
This patch connects the aspeed.otp device to the ASPEED Secure Boot
Controller (SBC) model. It implements OTP memory access via the SBC's
command interface and enables emulation of secure fuse programming
flows.
The following OTP commands are supported:
- READ: reads a 32-bit word from OTP memory into internal registers
- PROG: programs a 32-bit word value to the specified OTP address
Trace events are added to observe read/program operations and command
handling flow.
Signed-off-by: Kane-Chen-AS <kane_chen@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250812094011.2617526-3-kane_chen@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
|
|
Introduce a QEMU device model for ASPEED's One-Time Programmable (OTP)
memory.
This model simulates a word-addressable OTP region used for secure
fuse storage. The OTP memory can operate with an internal memory
buffer.
The OTP model provides a memory-like interface through a dedicated
AddressSpace, allowing other device models (e.g., SBC) to issue
transactions as if accessing a memory-mapped region.
Signed-off-by: Kane-Chen-AS <kane_chen@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/qemu-devel/20250812094011.2617526-2-kane_chen@aspeedtech.com
Signed-off-by: Cédric Le Goater <clg@redhat.com>
|
|
when cpu added, connect dintc irq to cpu INT_DMSI irq pin.
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Message-ID: <20250916122109.749813-12-gaosong@loongson.cn>
|
|
implement the read-clear feature for CSR_MSGIR register.
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Message-ID: <20250916122109.749813-11-gaosong@loongson.cn>
|
|
Add CSR_ESTAT.bit15 and CSR_ECFG.bit15 for DINTC irq.
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Message-ID: <20250916122109.749813-10-gaosong@loongson.cn>
|
|
Implement dintc set irq and update CSR_MSGIS.
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Message-ID: <20250916122109.749813-9-gaosong@loongson.cn>
|
|
Implement th DINTC realize and unrealize.
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Message-ID: <20250916122109.749813-8-gaosong@loongson.cn>
|
|
the DINTC use [2fe00000-2ff00000) Memory.
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Message-ID: <20250916122109.749813-7-gaosong@loongson.cn>
|
|
include CSR_MSGIS0-3, CSR_MSGIR and CSR_MSGIE.
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Message-ID: <20250916122109.749813-6-gaosong@loongson.cn>
|
|
Add Loongarch direct interrupt controller device base Definition.
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Message-ID: <20250916122109.749813-5-gaosong@loongson.cn>
|
|
Add feature register and misc register for dmsi feature checking and
setting
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Message-ID: <20250916122109.749813-4-gaosong@loongson.cn>
|
|
dmsi feature is added in LoongArchVirtMachinState, and it is used
to check whether virt machine supports the directy Message-Interrupts.
and by default set dmsi with ON_OFF_AUTO_AUTO.
LoongArchVirtMachineState adds misc_feature and misc_status for misc
features and status. and set the default dintc feature bit.
Msgint feature is added in LoongArchCPU, and it is used to check
whether th cpu supports the Message-Interrupts and by default set
mesgint with ON_OFF_AUTO_AUTO.
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Message-ID: <20250916122109.749813-3-gaosong@loongson.cn>
|
|
move some machine define to virt.h
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Message-ID: <20250916122109.749813-2-gaosong@loongson.cn>
|
|
With function helper_invtlb_page_asid(), only one TLB entry in
LoongArch emulated TLB is invalidated. so with QEMU TLB, it is not
necessary to flush all QEMU TLB, only flush address range specified
LoongArch emulated TLB is ok. Here invalidate_tlb_entry() is called
so that only QEMU TLB entry with specified address range is flushed.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
|
|
With function helper_invtlb_page_asid_or_g(), only one TLB entry in
LoongArch emulated TLB is invalidated. so with QEMU TLB, it is not
necessary to flush all QEMU TLB, only flush address range specified
LoongArch emulated TLB is ok. Here invalidate_tlb_entry() is called
so that only QEMU TLB entry with specified address range is flushed.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
|
|
Invalid tlb entry in function invalidate_tlb(), and its usage is
simple and easy to use.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
|
|
With function helper_invtlb_page_asid(), currently it is to search
TLB entry one by one. Instead STLB can be searched at first with hash
method, and then search MTLB with one by one method
Here common API loongarch_tlb_search_cb() is used in function
helper_invtlb_page_asid()
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
|
|
With function helper_invtlb_page_asid_or_g(), currently it is to
search TLB entry one by one. Instead STLB can be searched at first
with hash method, and then search MTLB with one by one method.
Here common API loongarch_tlb_search_cb() is used in function
helper_invtlb_page_asid_or_g().
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
|
|
With function loongarch_tlb_search_cb(), change return value type from
bool type to pointer LoongArchTLB *, the pointer type can be use directly
in future.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
|
|
Common API loongarch_tlb_search_cb() is added here to search TLB entry
with specified address.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
|
|
With function loongarch_tlb_search(), it is to search TLB entry with
speficied virtual address, the difference is selection with asid and
global bit. Here add selection callback with asid and global bit.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
|
|
When modify register CSR_STLBPS, the page size should come from
input parameter rather than old value.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
|
|
With function helper_tlbfill(), since there is no suitable TLB entry,
new TLB will be added and flush one old TLB entry. The old TLB entry
index is selected randomly now, instead it can be optimized as
following:
1. invalid TLB entry can be selected at first.
2. TLB entry with other ASID can be selected secondly
3. random method is used by last.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
|
|
With function helper_tlbwr(), specified LoongArch TLB entry will be
updated. There are two PTE pages in one TLB entry called even/odd
pages. Supposing even/odd page is normal/none state, when odd page
is added, TLB entry is changed as normal/normal state and even page
keeps unchanged.
In this situation, it is not necessary to flush QEMU TLB since even
page keep unchanged and odd page is newly changed. Here check whether
PTE page is the same or not, TLB flush can be skipped if both are the
same or newly added.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
|