From ea84a44250f79566484692bb000e97776ac66047 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Thu, 29 Nov 2018 09:17:42 -0800 Subject: scsi: esp: Defer command completion until previous interrupts have been handled The guest OS reads RSTAT, RSEQ, and RINTR, and expects those registers to reflect a consistent state. However, it is possible that the registers can change after RSTAT was read, but before RINTR is read, when esp_command_complete() is called. Guest OS qemu -------- ---- [handle interrupt] Read RSTAT esp_command_complete() RSTAT = STAT_ST esp_dma_done() RSTAT |= STAT_TC RSEQ = 0 RINTR = INTR_BS Read RSEQ Read RINTR RINTR = 0 RSTAT &= ~STAT_TC RSEQ = SEQ_CD The guest OS would then try to handle INTR_BS combined with an old value of RSTAT. This sometimes resulted in lost events, spurious interrupts, guest OS confusion, and stalled SCSI operations. A typical guest error log (observed with various versions of Linux) looks as follows. scsi host1: Spurious irq, sreg=13. ... scsi host1: Aborting command [84531f10:2a] scsi host1: Current command [f882eea8:35] scsi host1: Queued command [84531f10:2a] scsi host1: Active command [f882eea8:35] scsi host1: Dumping command log scsi host1: ent[15] CMD val[44] sreg[90] seqreg[00] sreg2[00] ireg[20] ss[00] event[0c] scsi host1: ent[16] CMD val[01] sreg[90] seqreg[00] sreg2[00] ireg[20] ss[02] event[0c] scsi host1: ent[17] CMD val[43] sreg[90] seqreg[00] sreg2[00] ireg[20] ss[02] event[0c] scsi host1: ent[18] EVENT val[0d] sreg[92] seqreg[04] sreg2[00] ireg[18] ss[00] event[0c] ... Defer handling command completion until previous interrupts have been handled to fix the problem. Signed-off-by: Guenter Roeck --- hw/scsi/esp-pci.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'hw/scsi/esp-pci.c') diff --git a/hw/scsi/esp-pci.c b/hw/scsi/esp-pci.c index d956909186..6b0bbb9b7f 100644 --- a/hw/scsi/esp-pci.c +++ b/hw/scsi/esp-pci.c @@ -313,8 +313,8 @@ static void esp_pci_hard_reset(DeviceState *dev) static const VMStateDescription vmstate_esp_pci_scsi = { .name = "pciespscsi", - .version_id = 0, - .minimum_version_id = 0, + .version_id = 1, + .minimum_version_id = 1, .fields = (VMStateField[]) { VMSTATE_PCI_DEVICE(parent_obj, PCIESPState), VMSTATE_BUFFER_UNSAFE(dma_regs, PCIESPState, 0, 8 * sizeof(uint32_t)), -- cgit 1.4.1