diff options
Diffstat (limited to 'results/classifier/009/none')
| -rw-r--r-- | results/classifier/009/none/16228234 | 1854 | ||||
| -rw-r--r-- | results/classifier/009/none/42613410 | 159 |
2 files changed, 2013 insertions, 0 deletions
diff --git a/results/classifier/009/none/16228234 b/results/classifier/009/none/16228234 new file mode 100644 index 000000000..074253f52 --- /dev/null +++ b/results/classifier/009/none/16228234 @@ -0,0 +1,1854 @@ +other: 0.535 +KVM: 0.445 +network: 0.440 +permissions: 0.439 +device: 0.439 +vnc: 0.420 +semantic: 0.411 +performance: 0.409 +graphic: 0.408 +boot: 0.402 +socket: 0.401 +files: 0.394 +PID: 0.385 +debug: 0.384 + +[Qemu-devel] [Bug?] BQL about live migration + +Hello Juan & Dave, + +We hit a bug in our test: +Network error occurs when migrating a guest, libvirt then rollback the +migration, causes qemu coredump +qemu log: +2017-03-01T12:54:33.904949+08:00|info|qemu[17672]|[33614]|monitor_qapi_event_emit[479]|: + {"timestamp": {"seconds": 1488344073, "microseconds": 904914}, "event": "STOP"} +2017-03-01T12:54:37.522500+08:00|info|qemu[17672]|[17672]|handle_qmp_command[3930]|: + qmp_cmd_name: migrate_cancel +2017-03-01T12:54:37.522607+08:00|info|qemu[17672]|[17672]|monitor_qapi_event_emit[479]|: + {"timestamp": {"seconds": 1488344077, "microseconds": 522556}, "event": +"MIGRATION", "data": {"status": "cancelling"}} +2017-03-01T12:54:37.524671+08:00|info|qemu[17672]|[17672]|handle_qmp_command[3930]|: + qmp_cmd_name: cont +2017-03-01T12:54:37.524733+08:00|info|qemu[17672]|[17672]|virtio_set_status[725]|: + virtio-balloon device status is 7 that means DRIVER OK +2017-03-01T12:54:37.525434+08:00|info|qemu[17672]|[17672]|virtio_set_status[725]|: + virtio-net device status is 7 that means DRIVER OK +2017-03-01T12:54:37.525484+08:00|info|qemu[17672]|[17672]|virtio_set_status[725]|: + virtio-blk device status is 7 that means DRIVER OK +2017-03-01T12:54:37.525562+08:00|info|qemu[17672]|[17672]|virtio_set_status[725]|: + virtio-serial device status is 7 that means DRIVER OK +2017-03-01T12:54:37.527653+08:00|info|qemu[17672]|[17672]|vm_start[981]|: +vm_state-notify:3ms +2017-03-01T12:54:37.528523+08:00|info|qemu[17672]|[17672]|monitor_qapi_event_emit[479]|: + {"timestamp": {"seconds": 1488344077, "microseconds": 527699}, "event": +"RESUME"} +2017-03-01T12:54:37.530680+08:00|info|qemu[17672]|[33614]|migration_bitmap_sync[720]|: + this iteration cycle takes 3s, new dirtied data:0MB +2017-03-01T12:54:37.530909+08:00|info|qemu[17672]|[33614]|monitor_qapi_event_emit[479]|: + {"timestamp": {"seconds": 1488344077, "microseconds": 530733}, "event": +"MIGRATION_PASS", "data": {"pass": 3}} +2017-03-01T04:54:37.530997Z qemu-kvm: socket_writev_buffer: Got err=32 for +(131583/18446744073709551615) +qemu-kvm: /home/abuild/rpmbuild/BUILD/qemu-kvm-2.6.0/hw/net/virtio_net.c:1519: +virtio_net_save: Assertion `!n->vhost_started' failed. +2017-03-01 12:54:43.028: shutting down + +> +From qemu log, qemu received and processed migrate_cancel/cont qmp commands +after guest been stopped and entered the last round of migration. Then +migration thread try to save device state when guest is running(started by +cont command), causes assert and coredump. +This is because in last iter, we call cpu_synchronize_all_states() to +synchronize vcpu states, this call will release qemu_global_mutex and wait +for do_kvm_cpu_synchronize_state() to be executed on target vcpu: +(gdb) bt +#0 0x00007f763d1046d5 in pthread_cond_wait@@GLIBC_2.3.2 () from +/lib64/libpthread.so.0 +#1 0x00007f7643e51d7f in qemu_cond_wait (cond=0x7f764445eca0 <qemu_work_cond>, +mutex=0x7f764445eba0 <qemu_global_mutex>) at util/qemu-thread-posix.c:132 +#2 0x00007f7643a2e154 in run_on_cpu (cpu=0x7f7644e06d80, func=0x7f7643a46413 +<do_kvm_cpu_synchronize_state>, data=0x7f7644e06d80) at +/mnt/public/yanghy/qemu-kvm/cpus.c:995 +#3 0x00007f7643a46487 in kvm_cpu_synchronize_state (cpu=0x7f7644e06d80) at +/mnt/public/yanghy/qemu-kvm/kvm-all.c:1805 +#4 0x00007f7643a2c700 in cpu_synchronize_state (cpu=0x7f7644e06d80) at +/mnt/public/yanghy/qemu-kvm/include/sysemu/kvm.h:457 +#5 0x00007f7643a2db0c in cpu_synchronize_all_states () at +/mnt/public/yanghy/qemu-kvm/cpus.c:766 +#6 0x00007f7643a67b5b in qemu_savevm_state_complete_precopy (f=0x7f76462f2d30, +iterable_only=false) at /mnt/public/yanghy/qemu-kvm/migration/savevm.c:1051 +#7 0x00007f7643d121e9 in migration_completion (s=0x7f76443e78c0 +<current_migration.37571>, current_active_state=4, +old_vm_running=0x7f74343fda00, start_time=0x7f74343fda08) at +migration/migration.c:1753 +#8 0x00007f7643d126c5 in migration_thread (opaque=0x7f76443e78c0 +<current_migration.37571>) at migration/migration.c:1922 +#9 0x00007f763d100dc5 in start_thread () from /lib64/libpthread.so.0 +#10 0x00007f763ce2e71d in clone () from /lib64/libc.so.6 +(gdb) p iothread_locked +$1 = true + +and then, qemu main thread been executed, it won't block because migration +thread released the qemu_global_mutex: +(gdb) thr 1 +[Switching to thread 1 (Thread 0x7fe298e08bc0 (LWP 30767))] +#0 os_host_main_loop_wait (timeout=931565) at main-loop.c:270 +270 QEMU_LOG(LOG_INFO,"***** after qemu_pool_ns: timeout %d\n", +timeout); +(gdb) p iothread_locked +$2 = true +(gdb) l 268 +263 +264 ret = qemu_poll_ns((GPollFD *)gpollfds->data, gpollfds->len, +timeout); +265 +266 +267 if (timeout) { +268 qemu_mutex_lock_iothread(); +269 if (runstate_check(RUN_STATE_FINISH_MIGRATE)) { +270 QEMU_LOG(LOG_INFO,"***** after qemu_pool_ns: timeout %d\n", +timeout); +271 } +272 } +(gdb) + +So, although we've hold iothread_lock in stop© phase of migration, we +can't guarantee the iothread been locked all through the stop & copy phase, +any thoughts on how to solve this problem? + + +Thanks, +-Gonglei + +On Fri, 03/03 09:29, Gonglei (Arei) wrote: +> +Hello Juan & Dave, +> +> +We hit a bug in our test: +> +Network error occurs when migrating a guest, libvirt then rollback the +> +migration, causes qemu coredump +> +qemu log: +> +2017-03-01T12:54:33.904949+08:00|info|qemu[17672]|[33614]|monitor_qapi_event_emit[479]|: +> +{"timestamp": {"seconds": 1488344073, "microseconds": 904914}, "event": +> +"STOP"} +> +2017-03-01T12:54:37.522500+08:00|info|qemu[17672]|[17672]|handle_qmp_command[3930]|: +> +qmp_cmd_name: migrate_cancel +> +2017-03-01T12:54:37.522607+08:00|info|qemu[17672]|[17672]|monitor_qapi_event_emit[479]|: +> +{"timestamp": {"seconds": 1488344077, "microseconds": 522556}, "event": +> +"MIGRATION", "data": {"status": "cancelling"}} +> +2017-03-01T12:54:37.524671+08:00|info|qemu[17672]|[17672]|handle_qmp_command[3930]|: +> +qmp_cmd_name: cont +> +2017-03-01T12:54:37.524733+08:00|info|qemu[17672]|[17672]|virtio_set_status[725]|: +> +virtio-balloon device status is 7 that means DRIVER OK +> +2017-03-01T12:54:37.525434+08:00|info|qemu[17672]|[17672]|virtio_set_status[725]|: +> +virtio-net device status is 7 that means DRIVER OK +> +2017-03-01T12:54:37.525484+08:00|info|qemu[17672]|[17672]|virtio_set_status[725]|: +> +virtio-blk device status is 7 that means DRIVER OK +> +2017-03-01T12:54:37.525562+08:00|info|qemu[17672]|[17672]|virtio_set_status[725]|: +> +virtio-serial device status is 7 that means DRIVER OK +> +2017-03-01T12:54:37.527653+08:00|info|qemu[17672]|[17672]|vm_start[981]|: +> +vm_state-notify:3ms +> +2017-03-01T12:54:37.528523+08:00|info|qemu[17672]|[17672]|monitor_qapi_event_emit[479]|: +> +{"timestamp": {"seconds": 1488344077, "microseconds": 527699}, "event": +> +"RESUME"} +> +2017-03-01T12:54:37.530680+08:00|info|qemu[17672]|[33614]|migration_bitmap_sync[720]|: +> +this iteration cycle takes 3s, new dirtied data:0MB +> +2017-03-01T12:54:37.530909+08:00|info|qemu[17672]|[33614]|monitor_qapi_event_emit[479]|: +> +{"timestamp": {"seconds": 1488344077, "microseconds": 530733}, "event": +> +"MIGRATION_PASS", "data": {"pass": 3}} +> +2017-03-01T04:54:37.530997Z qemu-kvm: socket_writev_buffer: Got err=32 for +> +(131583/18446744073709551615) +> +qemu-kvm: +> +/home/abuild/rpmbuild/BUILD/qemu-kvm-2.6.0/hw/net/virtio_net.c:1519: +> +virtio_net_save: Assertion `!n->vhost_started' failed. +> +2017-03-01 12:54:43.028: shutting down +> +> +From qemu log, qemu received and processed migrate_cancel/cont qmp commands +> +after guest been stopped and entered the last round of migration. Then +> +migration thread try to save device state when guest is running(started by +> +cont command), causes assert and coredump. +> +This is because in last iter, we call cpu_synchronize_all_states() to +> +synchronize vcpu states, this call will release qemu_global_mutex and wait +> +for do_kvm_cpu_synchronize_state() to be executed on target vcpu: +> +(gdb) bt +> +#0 0x00007f763d1046d5 in pthread_cond_wait@@GLIBC_2.3.2 () from +> +/lib64/libpthread.so.0 +> +#1 0x00007f7643e51d7f in qemu_cond_wait (cond=0x7f764445eca0 +> +<qemu_work_cond>, mutex=0x7f764445eba0 <qemu_global_mutex>) at +> +util/qemu-thread-posix.c:132 +> +#2 0x00007f7643a2e154 in run_on_cpu (cpu=0x7f7644e06d80, func=0x7f7643a46413 +> +<do_kvm_cpu_synchronize_state>, data=0x7f7644e06d80) at +> +/mnt/public/yanghy/qemu-kvm/cpus.c:995 +> +#3 0x00007f7643a46487 in kvm_cpu_synchronize_state (cpu=0x7f7644e06d80) at +> +/mnt/public/yanghy/qemu-kvm/kvm-all.c:1805 +> +#4 0x00007f7643a2c700 in cpu_synchronize_state (cpu=0x7f7644e06d80) at +> +/mnt/public/yanghy/qemu-kvm/include/sysemu/kvm.h:457 +> +#5 0x00007f7643a2db0c in cpu_synchronize_all_states () at +> +/mnt/public/yanghy/qemu-kvm/cpus.c:766 +> +#6 0x00007f7643a67b5b in qemu_savevm_state_complete_precopy +> +(f=0x7f76462f2d30, iterable_only=false) at +> +/mnt/public/yanghy/qemu-kvm/migration/savevm.c:1051 +> +#7 0x00007f7643d121e9 in migration_completion (s=0x7f76443e78c0 +> +<current_migration.37571>, current_active_state=4, +> +old_vm_running=0x7f74343fda00, start_time=0x7f74343fda08) at +> +migration/migration.c:1753 +> +#8 0x00007f7643d126c5 in migration_thread (opaque=0x7f76443e78c0 +> +<current_migration.37571>) at migration/migration.c:1922 +> +#9 0x00007f763d100dc5 in start_thread () from /lib64/libpthread.so.0 +> +#10 0x00007f763ce2e71d in clone () from /lib64/libc.so.6 +> +(gdb) p iothread_locked +> +$1 = true +> +> +and then, qemu main thread been executed, it won't block because migration +> +thread released the qemu_global_mutex: +> +(gdb) thr 1 +> +[Switching to thread 1 (Thread 0x7fe298e08bc0 (LWP 30767))] +> +#0 os_host_main_loop_wait (timeout=931565) at main-loop.c:270 +> +270 QEMU_LOG(LOG_INFO,"***** after qemu_pool_ns: timeout +> +%d\n", timeout); +> +(gdb) p iothread_locked +> +$2 = true +> +(gdb) l 268 +> +263 +> +264 ret = qemu_poll_ns((GPollFD *)gpollfds->data, gpollfds->len, +> +timeout); +> +265 +> +266 +> +267 if (timeout) { +> +268 qemu_mutex_lock_iothread(); +> +269 if (runstate_check(RUN_STATE_FINISH_MIGRATE)) { +> +270 QEMU_LOG(LOG_INFO,"***** after qemu_pool_ns: timeout +> +%d\n", timeout); +> +271 } +> +272 } +> +(gdb) +> +> +So, although we've hold iothread_lock in stop© phase of migration, we +> +can't guarantee the iothread been locked all through the stop & copy phase, +> +any thoughts on how to solve this problem? +Could you post a backtrace of the assertion? + +Fam + +On 2017/3/3 18:42, Fam Zheng wrote: +> +On Fri, 03/03 09:29, Gonglei (Arei) wrote: +> +> Hello Juan & Dave, +> +> +> +> We hit a bug in our test: +> +> Network error occurs when migrating a guest, libvirt then rollback the +> +> migration, causes qemu coredump +> +> qemu log: +> +> 2017-03-01T12:54:33.904949+08:00|info|qemu[17672]|[33614]|monitor_qapi_event_emit[479]|: +> +> {"timestamp": {"seconds": 1488344073, "microseconds": 904914}, "event": +> +> "STOP"} +> +> 2017-03-01T12:54:37.522500+08:00|info|qemu[17672]|[17672]|handle_qmp_command[3930]|: +> +> qmp_cmd_name: migrate_cancel +> +> 2017-03-01T12:54:37.522607+08:00|info|qemu[17672]|[17672]|monitor_qapi_event_emit[479]|: +> +> {"timestamp": {"seconds": 1488344077, "microseconds": 522556}, "event": +> +> "MIGRATION", "data": {"status": "cancelling"}} +> +> 2017-03-01T12:54:37.524671+08:00|info|qemu[17672]|[17672]|handle_qmp_command[3930]|: +> +> qmp_cmd_name: cont +> +> 2017-03-01T12:54:37.524733+08:00|info|qemu[17672]|[17672]|virtio_set_status[725]|: +> +> virtio-balloon device status is 7 that means DRIVER OK +> +> 2017-03-01T12:54:37.525434+08:00|info|qemu[17672]|[17672]|virtio_set_status[725]|: +> +> virtio-net device status is 7 that means DRIVER OK +> +> 2017-03-01T12:54:37.525484+08:00|info|qemu[17672]|[17672]|virtio_set_status[725]|: +> +> virtio-blk device status is 7 that means DRIVER OK +> +> 2017-03-01T12:54:37.525562+08:00|info|qemu[17672]|[17672]|virtio_set_status[725]|: +> +> virtio-serial device status is 7 that means DRIVER OK +> +> 2017-03-01T12:54:37.527653+08:00|info|qemu[17672]|[17672]|vm_start[981]|: +> +> vm_state-notify:3ms +> +> 2017-03-01T12:54:37.528523+08:00|info|qemu[17672]|[17672]|monitor_qapi_event_emit[479]|: +> +> {"timestamp": {"seconds": 1488344077, "microseconds": 527699}, "event": +> +> "RESUME"} +> +> 2017-03-01T12:54:37.530680+08:00|info|qemu[17672]|[33614]|migration_bitmap_sync[720]|: +> +> this iteration cycle takes 3s, new dirtied data:0MB +> +> 2017-03-01T12:54:37.530909+08:00|info|qemu[17672]|[33614]|monitor_qapi_event_emit[479]|: +> +> {"timestamp": {"seconds": 1488344077, "microseconds": 530733}, "event": +> +> "MIGRATION_PASS", "data": {"pass": 3}} +> +> 2017-03-01T04:54:37.530997Z qemu-kvm: socket_writev_buffer: Got err=32 for +> +> (131583/18446744073709551615) +> +> qemu-kvm: +> +> /home/abuild/rpmbuild/BUILD/qemu-kvm-2.6.0/hw/net/virtio_net.c:1519: +> +> virtio_net_save: Assertion `!n->vhost_started' failed. +> +> 2017-03-01 12:54:43.028: shutting down +> +> +> +> From qemu log, qemu received and processed migrate_cancel/cont qmp commands +> +> after guest been stopped and entered the last round of migration. Then +> +> migration thread try to save device state when guest is running(started by +> +> cont command), causes assert and coredump. +> +> This is because in last iter, we call cpu_synchronize_all_states() to +> +> synchronize vcpu states, this call will release qemu_global_mutex and wait +> +> for do_kvm_cpu_synchronize_state() to be executed on target vcpu: +> +> (gdb) bt +> +> #0 0x00007f763d1046d5 in pthread_cond_wait@@GLIBC_2.3.2 () from +> +> /lib64/libpthread.so.0 +> +> #1 0x00007f7643e51d7f in qemu_cond_wait (cond=0x7f764445eca0 +> +> <qemu_work_cond>, mutex=0x7f764445eba0 <qemu_global_mutex>) at +> +> util/qemu-thread-posix.c:132 +> +> #2 0x00007f7643a2e154 in run_on_cpu (cpu=0x7f7644e06d80, +> +> func=0x7f7643a46413 <do_kvm_cpu_synchronize_state>, data=0x7f7644e06d80) at +> +> /mnt/public/yanghy/qemu-kvm/cpus.c:995 +> +> #3 0x00007f7643a46487 in kvm_cpu_synchronize_state (cpu=0x7f7644e06d80) at +> +> /mnt/public/yanghy/qemu-kvm/kvm-all.c:1805 +> +> #4 0x00007f7643a2c700 in cpu_synchronize_state (cpu=0x7f7644e06d80) at +> +> /mnt/public/yanghy/qemu-kvm/include/sysemu/kvm.h:457 +> +> #5 0x00007f7643a2db0c in cpu_synchronize_all_states () at +> +> /mnt/public/yanghy/qemu-kvm/cpus.c:766 +> +> #6 0x00007f7643a67b5b in qemu_savevm_state_complete_precopy +> +> (f=0x7f76462f2d30, iterable_only=false) at +> +> /mnt/public/yanghy/qemu-kvm/migration/savevm.c:1051 +> +> #7 0x00007f7643d121e9 in migration_completion (s=0x7f76443e78c0 +> +> <current_migration.37571>, current_active_state=4, +> +> old_vm_running=0x7f74343fda00, start_time=0x7f74343fda08) at +> +> migration/migration.c:1753 +> +> #8 0x00007f7643d126c5 in migration_thread (opaque=0x7f76443e78c0 +> +> <current_migration.37571>) at migration/migration.c:1922 +> +> #9 0x00007f763d100dc5 in start_thread () from /lib64/libpthread.so.0 +> +> #10 0x00007f763ce2e71d in clone () from /lib64/libc.so.6 +> +> (gdb) p iothread_locked +> +> $1 = true +> +> +> +> and then, qemu main thread been executed, it won't block because migration +> +> thread released the qemu_global_mutex: +> +> (gdb) thr 1 +> +> [Switching to thread 1 (Thread 0x7fe298e08bc0 (LWP 30767))] +> +> #0 os_host_main_loop_wait (timeout=931565) at main-loop.c:270 +> +> 270 QEMU_LOG(LOG_INFO,"***** after qemu_pool_ns: timeout +> +> %d\n", timeout); +> +> (gdb) p iothread_locked +> +> $2 = true +> +> (gdb) l 268 +> +> 263 +> +> 264 ret = qemu_poll_ns((GPollFD *)gpollfds->data, gpollfds->len, +> +> timeout); +> +> 265 +> +> 266 +> +> 267 if (timeout) { +> +> 268 qemu_mutex_lock_iothread(); +> +> 269 if (runstate_check(RUN_STATE_FINISH_MIGRATE)) { +> +> 270 QEMU_LOG(LOG_INFO,"***** after qemu_pool_ns: timeout +> +> %d\n", timeout); +> +> 271 } +> +> 272 } +> +> (gdb) +> +> +> +> So, although we've hold iothread_lock in stop© phase of migration, we +> +> can't guarantee the iothread been locked all through the stop & copy phase, +> +> any thoughts on how to solve this problem? +> +> +Could you post a backtrace of the assertion? +#0 0x00007f97b1fbe5d7 in raise () from /usr/lib64/libc.so.6 +#1 0x00007f97b1fbfcc8 in abort () from /usr/lib64/libc.so.6 +#2 0x00007f97b1fb7546 in __assert_fail_base () from /usr/lib64/libc.so.6 +#3 0x00007f97b1fb75f2 in __assert_fail () from /usr/lib64/libc.so.6 +#4 0x000000000049fd19 in virtio_net_save (f=0x7f97a8ca44d0, +opaque=0x7f97a86e9018) at /usr/src/debug/qemu-kvm-2.6.0/hw/ +#5 0x000000000047e380 in vmstate_save_old_style (address@hidden, +address@hidden, se=0x7f9 +#6 0x000000000047fb93 in vmstate_save (address@hidden, address@hidden, +address@hidden +#7 0x0000000000481ad2 in qemu_savevm_state_complete_precopy (f=0x7f97a8ca44d0, +address@hidden) +#8 0x00000000006c6b60 in migration_completion (address@hidden +<current_migration.38312>, current_active_state=curre + address@hidden) at migration/migration.c:1761 +#9 0x00000000006c71db in migration_thread (address@hidden +<current_migration.38312>) at migration/migrati + +> +> +Fam +> +-- +Thanks, +Yang + +* Gonglei (Arei) (address@hidden) wrote: +> +Hello Juan & Dave, +cc'ing in pbonzini since it's magic involving cpu_synrhonize_all_states() + +> +We hit a bug in our test: +> +Network error occurs when migrating a guest, libvirt then rollback the +> +migration, causes qemu coredump +> +qemu log: +> +2017-03-01T12:54:33.904949+08:00|info|qemu[17672]|[33614]|monitor_qapi_event_emit[479]|: +> +{"timestamp": {"seconds": 1488344073, "microseconds": 904914}, "event": +> +"STOP"} +> +2017-03-01T12:54:37.522500+08:00|info|qemu[17672]|[17672]|handle_qmp_command[3930]|: +> +qmp_cmd_name: migrate_cancel +> +2017-03-01T12:54:37.522607+08:00|info|qemu[17672]|[17672]|monitor_qapi_event_emit[479]|: +> +{"timestamp": {"seconds": 1488344077, "microseconds": 522556}, "event": +> +"MIGRATION", "data": {"status": "cancelling"}} +> +2017-03-01T12:54:37.524671+08:00|info|qemu[17672]|[17672]|handle_qmp_command[3930]|: +> +qmp_cmd_name: cont +> +2017-03-01T12:54:37.524733+08:00|info|qemu[17672]|[17672]|virtio_set_status[725]|: +> +virtio-balloon device status is 7 that means DRIVER OK +> +2017-03-01T12:54:37.525434+08:00|info|qemu[17672]|[17672]|virtio_set_status[725]|: +> +virtio-net device status is 7 that means DRIVER OK +> +2017-03-01T12:54:37.525484+08:00|info|qemu[17672]|[17672]|virtio_set_status[725]|: +> +virtio-blk device status is 7 that means DRIVER OK +> +2017-03-01T12:54:37.525562+08:00|info|qemu[17672]|[17672]|virtio_set_status[725]|: +> +virtio-serial device status is 7 that means DRIVER OK +> +2017-03-01T12:54:37.527653+08:00|info|qemu[17672]|[17672]|vm_start[981]|: +> +vm_state-notify:3ms +> +2017-03-01T12:54:37.528523+08:00|info|qemu[17672]|[17672]|monitor_qapi_event_emit[479]|: +> +{"timestamp": {"seconds": 1488344077, "microseconds": 527699}, "event": +> +"RESUME"} +> +2017-03-01T12:54:37.530680+08:00|info|qemu[17672]|[33614]|migration_bitmap_sync[720]|: +> +this iteration cycle takes 3s, new dirtied data:0MB +> +2017-03-01T12:54:37.530909+08:00|info|qemu[17672]|[33614]|monitor_qapi_event_emit[479]|: +> +{"timestamp": {"seconds": 1488344077, "microseconds": 530733}, "event": +> +"MIGRATION_PASS", "data": {"pass": 3}} +> +2017-03-01T04:54:37.530997Z qemu-kvm: socket_writev_buffer: Got err=32 for +> +(131583/18446744073709551615) +> +qemu-kvm: +> +/home/abuild/rpmbuild/BUILD/qemu-kvm-2.6.0/hw/net/virtio_net.c:1519: +> +virtio_net_save: Assertion `!n->vhost_started' failed. +> +2017-03-01 12:54:43.028: shutting down +> +> +From qemu log, qemu received and processed migrate_cancel/cont qmp commands +> +after guest been stopped and entered the last round of migration. Then +> +migration thread try to save device state when guest is running(started by +> +cont command), causes assert and coredump. +> +This is because in last iter, we call cpu_synchronize_all_states() to +> +synchronize vcpu states, this call will release qemu_global_mutex and wait +> +for do_kvm_cpu_synchronize_state() to be executed on target vcpu: +> +(gdb) bt +> +#0 0x00007f763d1046d5 in pthread_cond_wait@@GLIBC_2.3.2 () from +> +/lib64/libpthread.so.0 +> +#1 0x00007f7643e51d7f in qemu_cond_wait (cond=0x7f764445eca0 +> +<qemu_work_cond>, mutex=0x7f764445eba0 <qemu_global_mutex>) at +> +util/qemu-thread-posix.c:132 +> +#2 0x00007f7643a2e154 in run_on_cpu (cpu=0x7f7644e06d80, func=0x7f7643a46413 +> +<do_kvm_cpu_synchronize_state>, data=0x7f7644e06d80) at +> +/mnt/public/yanghy/qemu-kvm/cpus.c:995 +> +#3 0x00007f7643a46487 in kvm_cpu_synchronize_state (cpu=0x7f7644e06d80) at +> +/mnt/public/yanghy/qemu-kvm/kvm-all.c:1805 +> +#4 0x00007f7643a2c700 in cpu_synchronize_state (cpu=0x7f7644e06d80) at +> +/mnt/public/yanghy/qemu-kvm/include/sysemu/kvm.h:457 +> +#5 0x00007f7643a2db0c in cpu_synchronize_all_states () at +> +/mnt/public/yanghy/qemu-kvm/cpus.c:766 +> +#6 0x00007f7643a67b5b in qemu_savevm_state_complete_precopy +> +(f=0x7f76462f2d30, iterable_only=false) at +> +/mnt/public/yanghy/qemu-kvm/migration/savevm.c:1051 +> +#7 0x00007f7643d121e9 in migration_completion (s=0x7f76443e78c0 +> +<current_migration.37571>, current_active_state=4, +> +old_vm_running=0x7f74343fda00, start_time=0x7f74343fda08) at +> +migration/migration.c:1753 +> +#8 0x00007f7643d126c5 in migration_thread (opaque=0x7f76443e78c0 +> +<current_migration.37571>) at migration/migration.c:1922 +> +#9 0x00007f763d100dc5 in start_thread () from /lib64/libpthread.so.0 +> +#10 0x00007f763ce2e71d in clone () from /lib64/libc.so.6 +> +(gdb) p iothread_locked +> +$1 = true +> +> +and then, qemu main thread been executed, it won't block because migration +> +thread released the qemu_global_mutex: +> +(gdb) thr 1 +> +[Switching to thread 1 (Thread 0x7fe298e08bc0 (LWP 30767))] +> +#0 os_host_main_loop_wait (timeout=931565) at main-loop.c:270 +> +270 QEMU_LOG(LOG_INFO,"***** after qemu_pool_ns: timeout +> +%d\n", timeout); +> +(gdb) p iothread_locked +> +$2 = true +> +(gdb) l 268 +> +263 +> +264 ret = qemu_poll_ns((GPollFD *)gpollfds->data, gpollfds->len, +> +timeout); +> +265 +> +266 +> +267 if (timeout) { +> +268 qemu_mutex_lock_iothread(); +> +269 if (runstate_check(RUN_STATE_FINISH_MIGRATE)) { +> +270 QEMU_LOG(LOG_INFO,"***** after qemu_pool_ns: timeout +> +%d\n", timeout); +> +271 } +> +272 } +> +(gdb) +> +> +So, although we've hold iothread_lock in stop© phase of migration, we +> +can't guarantee the iothread been locked all through the stop & copy phase, +> +any thoughts on how to solve this problem? +Ouch that's pretty nasty; I remember Paolo explaining to me a while ago that +their were times when run_on_cpu would have to drop the BQL and I worried about +it, +but this is the 1st time I've seen an error due to it. + +Do you know what the migration state was at that point? Was it +MIGRATION_STATUS_CANCELLING? +I'm thinking perhaps we should stop 'cont' from continuing while migration is in +MIGRATION_STATUS_CANCELLING. Do we send an event when we hit CANCELLED - so +that +perhaps libvirt could avoid sending the 'cont' until then? + +Dave + + +> +> +Thanks, +> +-Gonglei +> +-- +Dr. David Alan Gilbert / address@hidden / Manchester, UK + +On 03/03/2017 13:00, Dr. David Alan Gilbert wrote: +> +Ouch that's pretty nasty; I remember Paolo explaining to me a while ago that +> +their were times when run_on_cpu would have to drop the BQL and I worried +> +about it, +> +but this is the 1st time I've seen an error due to it. +> +> +Do you know what the migration state was at that point? Was it +> +MIGRATION_STATUS_CANCELLING? +> +I'm thinking perhaps we should stop 'cont' from continuing while migration is +> +in +> +MIGRATION_STATUS_CANCELLING. Do we send an event when we hit CANCELLED - so +> +that +> +perhaps libvirt could avoid sending the 'cont' until then? +No, there's no event, though I thought libvirt would poll until +"query-migrate" returns the cancelled state. Of course that is a small +consolation, because a segfault is unacceptable. + +One possibility is to suspend the monitor in qmp_migrate_cancel and +resume it (with add_migration_state_change_notifier) when we hit the +CANCELLED state. I'm not sure what the latency would be between the end +of migrate_fd_cancel and finally reaching CANCELLED. + +Paolo + +* Paolo Bonzini (address@hidden) wrote: +> +> +> +On 03/03/2017 13:00, Dr. David Alan Gilbert wrote: +> +> Ouch that's pretty nasty; I remember Paolo explaining to me a while ago that +> +> their were times when run_on_cpu would have to drop the BQL and I worried +> +> about it, +> +> but this is the 1st time I've seen an error due to it. +> +> +> +> Do you know what the migration state was at that point? Was it +> +> MIGRATION_STATUS_CANCELLING? +> +> I'm thinking perhaps we should stop 'cont' from continuing while migration +> +> is in +> +> MIGRATION_STATUS_CANCELLING. Do we send an event when we hit CANCELLED - +> +> so that +> +> perhaps libvirt could avoid sending the 'cont' until then? +> +> +No, there's no event, though I thought libvirt would poll until +> +"query-migrate" returns the cancelled state. Of course that is a small +> +consolation, because a segfault is unacceptable. +I think you might get an event if you set the new migrate capability called +'events' on! + +void migrate_set_state(int *state, int old_state, int new_state) +{ + if (atomic_cmpxchg(state, old_state, new_state) == old_state) { + trace_migrate_set_state(new_state); + migrate_generate_event(new_state); + } +} + +static void migrate_generate_event(int new_state) +{ + if (migrate_use_events()) { + qapi_event_send_migration(new_state, &error_abort); + } +} + +That event feature went in sometime after 2.3.0. + +> +One possibility is to suspend the monitor in qmp_migrate_cancel and +> +resume it (with add_migration_state_change_notifier) when we hit the +> +CANCELLED state. I'm not sure what the latency would be between the end +> +of migrate_fd_cancel and finally reaching CANCELLED. +I don't like suspending monitors; it can potentially take quite a significant +time to do a cancel. +How about making 'cont' fail if we're in CANCELLING? + +I'd really love to see the 'run_on_cpu' being more careful about the BQL; +we really need all of the rest of the devices to stay quiesced at times. + +Dave + +> +Paolo +-- +Dr. David Alan Gilbert / address@hidden / Manchester, UK + +On 03/03/2017 14:11, Dr. David Alan Gilbert wrote: +> +* Paolo Bonzini (address@hidden) wrote: +> +> +> +> +> +> On 03/03/2017 13:00, Dr. David Alan Gilbert wrote: +> +>> Ouch that's pretty nasty; I remember Paolo explaining to me a while ago that +> +>> their were times when run_on_cpu would have to drop the BQL and I worried +> +>> about it, +> +>> but this is the 1st time I've seen an error due to it. +> +>> +> +>> Do you know what the migration state was at that point? Was it +> +>> MIGRATION_STATUS_CANCELLING? +> +>> I'm thinking perhaps we should stop 'cont' from continuing while migration +> +>> is in +> +>> MIGRATION_STATUS_CANCELLING. Do we send an event when we hit CANCELLED - +> +>> so that +> +>> perhaps libvirt could avoid sending the 'cont' until then? +> +> +> +> No, there's no event, though I thought libvirt would poll until +> +> "query-migrate" returns the cancelled state. Of course that is a small +> +> consolation, because a segfault is unacceptable. +> +> +I think you might get an event if you set the new migrate capability called +> +'events' on! +> +> +void migrate_set_state(int *state, int old_state, int new_state) +> +{ +> +if (atomic_cmpxchg(state, old_state, new_state) == old_state) { +> +trace_migrate_set_state(new_state); +> +migrate_generate_event(new_state); +> +} +> +} +> +> +static void migrate_generate_event(int new_state) +> +{ +> +if (migrate_use_events()) { +> +qapi_event_send_migration(new_state, &error_abort); +> +} +> +} +> +> +That event feature went in sometime after 2.3.0. +> +> +> One possibility is to suspend the monitor in qmp_migrate_cancel and +> +> resume it (with add_migration_state_change_notifier) when we hit the +> +> CANCELLED state. I'm not sure what the latency would be between the end +> +> of migrate_fd_cancel and finally reaching CANCELLED. +> +> +I don't like suspending monitors; it can potentially take quite a significant +> +time to do a cancel. +> +How about making 'cont' fail if we're in CANCELLING? +Actually I thought that would be the case already (in fact CANCELLING is +internal only; the outside world sees it as "active" in query-migrate). + +Lei, what is the runstate? (That is, why did cont succeed at all)? + +Paolo + +> +I'd really love to see the 'run_on_cpu' being more careful about the BQL; +> +we really need all of the rest of the devices to stay quiesced at times. +That's not really possible, because of how condition variables work. :( + +* Paolo Bonzini (address@hidden) wrote: +> +> +> +On 03/03/2017 14:11, Dr. David Alan Gilbert wrote: +> +> * Paolo Bonzini (address@hidden) wrote: +> +>> +> +>> +> +>> On 03/03/2017 13:00, Dr. David Alan Gilbert wrote: +> +>>> Ouch that's pretty nasty; I remember Paolo explaining to me a while ago +> +>>> that +> +>>> their were times when run_on_cpu would have to drop the BQL and I worried +> +>>> about it, +> +>>> but this is the 1st time I've seen an error due to it. +> +>>> +> +>>> Do you know what the migration state was at that point? Was it +> +>>> MIGRATION_STATUS_CANCELLING? +> +>>> I'm thinking perhaps we should stop 'cont' from continuing while +> +>>> migration is in +> +>>> MIGRATION_STATUS_CANCELLING. Do we send an event when we hit CANCELLED - +> +>>> so that +> +>>> perhaps libvirt could avoid sending the 'cont' until then? +> +>> +> +>> No, there's no event, though I thought libvirt would poll until +> +>> "query-migrate" returns the cancelled state. Of course that is a small +> +>> consolation, because a segfault is unacceptable. +> +> +> +> I think you might get an event if you set the new migrate capability called +> +> 'events' on! +> +> +> +> void migrate_set_state(int *state, int old_state, int new_state) +> +> { +> +> if (atomic_cmpxchg(state, old_state, new_state) == old_state) { +> +> trace_migrate_set_state(new_state); +> +> migrate_generate_event(new_state); +> +> } +> +> } +> +> +> +> static void migrate_generate_event(int new_state) +> +> { +> +> if (migrate_use_events()) { +> +> qapi_event_send_migration(new_state, &error_abort); +> +> } +> +> } +> +> +> +> That event feature went in sometime after 2.3.0. +> +> +> +>> One possibility is to suspend the monitor in qmp_migrate_cancel and +> +>> resume it (with add_migration_state_change_notifier) when we hit the +> +>> CANCELLED state. I'm not sure what the latency would be between the end +> +>> of migrate_fd_cancel and finally reaching CANCELLED. +> +> +> +> I don't like suspending monitors; it can potentially take quite a +> +> significant +> +> time to do a cancel. +> +> How about making 'cont' fail if we're in CANCELLING? +> +> +Actually I thought that would be the case already (in fact CANCELLING is +> +internal only; the outside world sees it as "active" in query-migrate). +> +> +Lei, what is the runstate? (That is, why did cont succeed at all)? +I suspect it's RUN_STATE_FINISH_MIGRATE - we set that before we do the device +save, and that's what we get at the end of a migrate and it's legal to restart +from there. + +> +Paolo +> +> +> I'd really love to see the 'run_on_cpu' being more careful about the BQL; +> +> we really need all of the rest of the devices to stay quiesced at times. +> +> +That's not really possible, because of how condition variables work. :( +*Really* we need to find a solution to that - there's probably lots of +other things that can spring up in that small window other than the +'cont'. + +Dave + +-- +Dr. David Alan Gilbert / address@hidden / Manchester, UK + +On 03/03/2017 14:26, Dr. David Alan Gilbert wrote: +> +* Paolo Bonzini (address@hidden) wrote: +> +> +> +> +> +> On 03/03/2017 14:11, Dr. David Alan Gilbert wrote: +> +>> * Paolo Bonzini (address@hidden) wrote: +> +>>> +> +>>> +> +>>> On 03/03/2017 13:00, Dr. David Alan Gilbert wrote: +> +>>>> Ouch that's pretty nasty; I remember Paolo explaining to me a while ago +> +>>>> that +> +>>>> their were times when run_on_cpu would have to drop the BQL and I worried +> +>>>> about it, +> +>>>> but this is the 1st time I've seen an error due to it. +> +>>>> +> +>>>> Do you know what the migration state was at that point? Was it +> +>>>> MIGRATION_STATUS_CANCELLING? +> +>>>> I'm thinking perhaps we should stop 'cont' from continuing while +> +>>>> migration is in +> +>>>> MIGRATION_STATUS_CANCELLING. Do we send an event when we hit CANCELLED - +> +>>>> so that +> +>>>> perhaps libvirt could avoid sending the 'cont' until then? +> +>>> +> +>>> No, there's no event, though I thought libvirt would poll until +> +>>> "query-migrate" returns the cancelled state. Of course that is a small +> +>>> consolation, because a segfault is unacceptable. +> +>> +> +>> I think you might get an event if you set the new migrate capability called +> +>> 'events' on! +> +>> +> +>> void migrate_set_state(int *state, int old_state, int new_state) +> +>> { +> +>> if (atomic_cmpxchg(state, old_state, new_state) == old_state) { +> +>> trace_migrate_set_state(new_state); +> +>> migrate_generate_event(new_state); +> +>> } +> +>> } +> +>> +> +>> static void migrate_generate_event(int new_state) +> +>> { +> +>> if (migrate_use_events()) { +> +>> qapi_event_send_migration(new_state, &error_abort); +> +>> } +> +>> } +> +>> +> +>> That event feature went in sometime after 2.3.0. +> +>> +> +>>> One possibility is to suspend the monitor in qmp_migrate_cancel and +> +>>> resume it (with add_migration_state_change_notifier) when we hit the +> +>>> CANCELLED state. I'm not sure what the latency would be between the end +> +>>> of migrate_fd_cancel and finally reaching CANCELLED. +> +>> +> +>> I don't like suspending monitors; it can potentially take quite a +> +>> significant +> +>> time to do a cancel. +> +>> How about making 'cont' fail if we're in CANCELLING? +> +> +> +> Actually I thought that would be the case already (in fact CANCELLING is +> +> internal only; the outside world sees it as "active" in query-migrate). +> +> +> +> Lei, what is the runstate? (That is, why did cont succeed at all)? +> +> +I suspect it's RUN_STATE_FINISH_MIGRATE - we set that before we do the device +> +save, and that's what we get at the end of a migrate and it's legal to restart +> +from there. +Yeah, but I think we get there at the end of a failed migrate only. So +perhaps we can introduce a new state RUN_STATE_FAILED_MIGRATE and forbid +"cont" from finish-migrate (only allow it from failed-migrate)? + +Paolo + +> +> Paolo +> +> +> +>> I'd really love to see the 'run_on_cpu' being more careful about the BQL; +> +>> we really need all of the rest of the devices to stay quiesced at times. +> +> +> +> That's not really possible, because of how condition variables work. :( +> +> +*Really* we need to find a solution to that - there's probably lots of +> +other things that can spring up in that small window other than the +> +'cont'. +> +> +Dave +> +> +-- +> +Dr. David Alan Gilbert / address@hidden / Manchester, UK +> + +Hi Paolo, + +On Fri, Mar 3, 2017 at 9:33 PM, Paolo Bonzini <address@hidden> wrote: + +> +> +> +On 03/03/2017 14:26, Dr. David Alan Gilbert wrote: +> +> * Paolo Bonzini (address@hidden) wrote: +> +>> +> +>> +> +>> On 03/03/2017 14:11, Dr. David Alan Gilbert wrote: +> +>>> * Paolo Bonzini (address@hidden) wrote: +> +>>>> +> +>>>> +> +>>>> On 03/03/2017 13:00, Dr. David Alan Gilbert wrote: +> +>>>>> Ouch that's pretty nasty; I remember Paolo explaining to me a while +> +ago that +> +>>>>> their were times when run_on_cpu would have to drop the BQL and I +> +worried about it, +> +>>>>> but this is the 1st time I've seen an error due to it. +> +>>>>> +> +>>>>> Do you know what the migration state was at that point? Was it +> +MIGRATION_STATUS_CANCELLING? +> +>>>>> I'm thinking perhaps we should stop 'cont' from continuing while +> +migration is in +> +>>>>> MIGRATION_STATUS_CANCELLING. Do we send an event when we hit +> +CANCELLED - so that +> +>>>>> perhaps libvirt could avoid sending the 'cont' until then? +> +>>>> +> +>>>> No, there's no event, though I thought libvirt would poll until +> +>>>> "query-migrate" returns the cancelled state. Of course that is a +> +small +> +>>>> consolation, because a segfault is unacceptable. +> +>>> +> +>>> I think you might get an event if you set the new migrate capability +> +called +> +>>> 'events' on! +> +>>> +> +>>> void migrate_set_state(int *state, int old_state, int new_state) +> +>>> { +> +>>> if (atomic_cmpxchg(state, old_state, new_state) == old_state) { +> +>>> trace_migrate_set_state(new_state); +> +>>> migrate_generate_event(new_state); +> +>>> } +> +>>> } +> +>>> +> +>>> static void migrate_generate_event(int new_state) +> +>>> { +> +>>> if (migrate_use_events()) { +> +>>> qapi_event_send_migration(new_state, &error_abort); +> +>>> } +> +>>> } +> +>>> +> +>>> That event feature went in sometime after 2.3.0. +> +>>> +> +>>>> One possibility is to suspend the monitor in qmp_migrate_cancel and +> +>>>> resume it (with add_migration_state_change_notifier) when we hit the +> +>>>> CANCELLED state. I'm not sure what the latency would be between the +> +end +> +>>>> of migrate_fd_cancel and finally reaching CANCELLED. +> +>>> +> +>>> I don't like suspending monitors; it can potentially take quite a +> +significant +> +>>> time to do a cancel. +> +>>> How about making 'cont' fail if we're in CANCELLING? +> +>> +> +>> Actually I thought that would be the case already (in fact CANCELLING is +> +>> internal only; the outside world sees it as "active" in query-migrate). +> +>> +> +>> Lei, what is the runstate? (That is, why did cont succeed at all)? +> +> +> +> I suspect it's RUN_STATE_FINISH_MIGRATE - we set that before we do the +> +device +> +> save, and that's what we get at the end of a migrate and it's legal to +> +restart +> +> from there. +> +> +Yeah, but I think we get there at the end of a failed migrate only. So +> +perhaps we can introduce a new state RUN_STATE_FAILED_MIGRATE +I think we do not need to introduce a new state here. If we hit 'cont' and +the run state is RUN_STATE_FINISH_MIGRATE, we could assume that +migration failed because 'RUN_STATE_FINISH_MIGRATE' only exists on +source side, means we are finishing migration, a 'cont' at the meantime +indicates that we are rolling back, otherwise source side should be +destroyed. + + +> +and forbid +> +"cont" from finish-migrate (only allow it from failed-migrate)? +> +The problem of forbid 'cont' here is that it will result in a failed +migration and the source +side will remain paused. We actually expect a usable guest when rollback. +Is there a way to kill migration thread when we're under main thread, if +there is, we +could do the following to solve this problem: +1. 'cont' received during runstate RUN_STATE_FINISH_MIGRATE +2. kill migration thread +3. vm_start() + +But this only solves 'cont' problem. As Dave said before, other things could +happen during the small windows while we are finishing migration, that's +what I was worried about... + + +> +Paolo +> +> +>> Paolo +> +>> +> +>>> I'd really love to see the 'run_on_cpu' being more careful about the +> +BQL; +> +>>> we really need all of the rest of the devices to stay quiesced at +> +times. +> +>> +> +>> That's not really possible, because of how condition variables work. :( +> +> +> +> *Really* we need to find a solution to that - there's probably lots of +> +> other things that can spring up in that small window other than the +> +> 'cont'. +> +> +> +> Dave +> +> +> +> -- +> +> Dr. David Alan Gilbert / address@hidden / Manchester, UK +> +> +> +> + +* Paolo Bonzini (address@hidden) wrote: +> +> +> +On 03/03/2017 14:26, Dr. David Alan Gilbert wrote: +> +> * Paolo Bonzini (address@hidden) wrote: +> +>> +> +>> +> +>> On 03/03/2017 14:11, Dr. David Alan Gilbert wrote: +> +>>> * Paolo Bonzini (address@hidden) wrote: +> +>>>> +> +>>>> +> +>>>> On 03/03/2017 13:00, Dr. David Alan Gilbert wrote: +> +>>>>> Ouch that's pretty nasty; I remember Paolo explaining to me a while ago +> +>>>>> that +> +>>>>> their were times when run_on_cpu would have to drop the BQL and I +> +>>>>> worried about it, +> +>>>>> but this is the 1st time I've seen an error due to it. +> +>>>>> +> +>>>>> Do you know what the migration state was at that point? Was it +> +>>>>> MIGRATION_STATUS_CANCELLING? +> +>>>>> I'm thinking perhaps we should stop 'cont' from continuing while +> +>>>>> migration is in +> +>>>>> MIGRATION_STATUS_CANCELLING. Do we send an event when we hit CANCELLED +> +>>>>> - so that +> +>>>>> perhaps libvirt could avoid sending the 'cont' until then? +> +>>>> +> +>>>> No, there's no event, though I thought libvirt would poll until +> +>>>> "query-migrate" returns the cancelled state. Of course that is a small +> +>>>> consolation, because a segfault is unacceptable. +> +>>> +> +>>> I think you might get an event if you set the new migrate capability +> +>>> called +> +>>> 'events' on! +> +>>> +> +>>> void migrate_set_state(int *state, int old_state, int new_state) +> +>>> { +> +>>> if (atomic_cmpxchg(state, old_state, new_state) == old_state) { +> +>>> trace_migrate_set_state(new_state); +> +>>> migrate_generate_event(new_state); +> +>>> } +> +>>> } +> +>>> +> +>>> static void migrate_generate_event(int new_state) +> +>>> { +> +>>> if (migrate_use_events()) { +> +>>> qapi_event_send_migration(new_state, &error_abort); +> +>>> } +> +>>> } +> +>>> +> +>>> That event feature went in sometime after 2.3.0. +> +>>> +> +>>>> One possibility is to suspend the monitor in qmp_migrate_cancel and +> +>>>> resume it (with add_migration_state_change_notifier) when we hit the +> +>>>> CANCELLED state. I'm not sure what the latency would be between the end +> +>>>> of migrate_fd_cancel and finally reaching CANCELLED. +> +>>> +> +>>> I don't like suspending monitors; it can potentially take quite a +> +>>> significant +> +>>> time to do a cancel. +> +>>> How about making 'cont' fail if we're in CANCELLING? +> +>> +> +>> Actually I thought that would be the case already (in fact CANCELLING is +> +>> internal only; the outside world sees it as "active" in query-migrate). +> +>> +> +>> Lei, what is the runstate? (That is, why did cont succeed at all)? +> +> +> +> I suspect it's RUN_STATE_FINISH_MIGRATE - we set that before we do the +> +> device +> +> save, and that's what we get at the end of a migrate and it's legal to +> +> restart +> +> from there. +> +> +Yeah, but I think we get there at the end of a failed migrate only. So +> +perhaps we can introduce a new state RUN_STATE_FAILED_MIGRATE and forbid +> +"cont" from finish-migrate (only allow it from failed-migrate)? +OK, I was wrong in my previous statement; we actually go +FINISH_MIGRATE->POSTMIGRATE +so no new state is needed; you shouldn't be restarting the cpu in +FINISH_MIGRATE. + +My preference is to get libvirt to wait for the transition to POSTMIGRATE before +it issues the 'cont'. I'd rather not block the monitor with 'cont' but I'm +not sure how we'd cleanly make cont fail without breaking existing libvirts +that usually don't hit this race. (cc'ing in Jiri). + +Dave + +> +Paolo +> +> +>> Paolo +> +>> +> +>>> I'd really love to see the 'run_on_cpu' being more careful about the BQL; +> +>>> we really need all of the rest of the devices to stay quiesced at times. +> +>> +> +>> That's not really possible, because of how condition variables work. :( +> +> +> +> *Really* we need to find a solution to that - there's probably lots of +> +> other things that can spring up in that small window other than the +> +> 'cont'. +> +> +> +> Dave +> +> +> +> -- +> +> Dr. David Alan Gilbert / address@hidden / Manchester, UK +> +> +-- +Dr. David Alan Gilbert / address@hidden / Manchester, UK + +Hi Dave, + +On Fri, Mar 3, 2017 at 9:26 PM, Dr. David Alan Gilbert <address@hidden> +wrote: + +> +* Paolo Bonzini (address@hidden) wrote: +> +> +> +> +> +> On 03/03/2017 14:11, Dr. David Alan Gilbert wrote: +> +> > * Paolo Bonzini (address@hidden) wrote: +> +> >> +> +> >> +> +> >> On 03/03/2017 13:00, Dr. David Alan Gilbert wrote: +> +... +> +> > That event feature went in sometime after 2.3.0. +> +> > +> +> >> One possibility is to suspend the monitor in qmp_migrate_cancel and +> +> >> resume it (with add_migration_state_change_notifier) when we hit the +> +> >> CANCELLED state. I'm not sure what the latency would be between the +> +end +> +> >> of migrate_fd_cancel and finally reaching CANCELLED. +> +> > +> +> > I don't like suspending monitors; it can potentially take quite a +> +significant +> +> > time to do a cancel. +> +> > How about making 'cont' fail if we're in CANCELLING? +> +> +> +> Actually I thought that would be the case already (in fact CANCELLING is +> +> internal only; the outside world sees it as "active" in query-migrate). +> +> +> +> Lei, what is the runstate? (That is, why did cont succeed at all)? +> +> +I suspect it's RUN_STATE_FINISH_MIGRATE - we set that before we do the +> +device +> +It is RUN_STATE_FINISH_MIGRATE. + + +> +save, and that's what we get at the end of a migrate and it's legal to +> +restart +> +from there. +> +> +> Paolo +> +> +> +> > I'd really love to see the 'run_on_cpu' being more careful about the +> +BQL; +> +> > we really need all of the rest of the devices to stay quiesced at +> +times. +> +> +> +> That's not really possible, because of how condition variables work. :( +> +> +*Really* we need to find a solution to that - there's probably lots of +> +other things that can spring up in that small window other than the +> +'cont'. +> +This is what I was worry about. Not only sync_cpu_state() will call +run_on_cpu() +but also vm_stop_force_state() will, both of them did hit the small windows +in our +test. + + +> +> +Dave +> +> +-- +> +Dr. David Alan Gilbert / address@hidden / Manchester, UK +> +> + diff --git a/results/classifier/009/none/42613410 b/results/classifier/009/none/42613410 new file mode 100644 index 000000000..4d3ce0dfe --- /dev/null +++ b/results/classifier/009/none/42613410 @@ -0,0 +1,159 @@ +vnc: 0.400 +KVM: 0.381 +permissions: 0.373 +device: 0.342 +other: 0.332 +graphic: 0.330 +semantic: 0.327 +performance: 0.324 +debug: 0.311 +network: 0.284 +PID: 0.276 +files: 0.264 +socket: 0.190 +boot: 0.187 + +[Qemu-devel] [PATCH, Bug 1612908] scripts: Add TCP endpoints for qom-* scripts + +From: Carl Allendorph <address@hidden> + +I've created a patch for bug #1612908. The current docs for the scripts +in the "scripts/qmp/" directory suggest that both unix sockets and +tcp endpoints can be used. The TCP endpoints don't work for most of the +scripts, with notable exception of 'qmp-shell'. This patch attempts to +refactor the process of distinguishing between unix path endpoints and +tcp endpoints to work for all of these scripts. + +Carl Allendorph (1): + scripts: Add ability for qom-* python scripts to target tcp endpoints + + scripts/qmp/qmp-shell | 22 ++-------------------- + scripts/qmp/qmp.py | 23 ++++++++++++++++++++--- + 2 files changed, 22 insertions(+), 23 deletions(-) + +-- +2.7.4 + +From: Carl Allendorph <address@hidden> + +The current code for QEMUMonitorProtocol accepts both a unix socket +endpoint as a string and a tcp endpoint as a tuple. Most of the scripts +that use this class don't massage the command line argument to generate +a tuple. This patch refactors qmp-shell slightly to reuse the existing +parsing of the "host:port" string for all the qom-* scripts. + +Signed-off-by: Carl Allendorph <address@hidden> +--- + scripts/qmp/qmp-shell | 22 ++-------------------- + scripts/qmp/qmp.py | 23 ++++++++++++++++++++--- + 2 files changed, 22 insertions(+), 23 deletions(-) + +diff --git a/scripts/qmp/qmp-shell b/scripts/qmp/qmp-shell +index 0373b24..8a2a437 100755 +--- a/scripts/qmp/qmp-shell ++++ b/scripts/qmp/qmp-shell +@@ -83,9 +83,6 @@ class QMPCompleter(list): + class QMPShellError(Exception): + pass + +-class QMPShellBadPort(QMPShellError): +- pass +- + class FuzzyJSON(ast.NodeTransformer): + '''This extension of ast.NodeTransformer filters literal "true/false/null" + values in an AST and replaces them by proper "True/False/None" values that +@@ -103,28 +100,13 @@ class FuzzyJSON(ast.NodeTransformer): + # _execute_cmd()). Let's design a better one. + class QMPShell(qmp.QEMUMonitorProtocol): + def __init__(self, address, pretty=False): +- qmp.QEMUMonitorProtocol.__init__(self, self.__get_address(address)) ++ qmp.QEMUMonitorProtocol.__init__(self, address) + self._greeting = None + self._completer = None + self._pretty = pretty + self._transmode = False + self._actions = list() + +- def __get_address(self, arg): +- """ +- Figure out if the argument is in the port:host form, if it's not it's +- probably a file path. +- """ +- addr = arg.split(':') +- if len(addr) == 2: +- try: +- port = int(addr[1]) +- except ValueError: +- raise QMPShellBadPort +- return ( addr[0], port ) +- # socket path +- return arg +- + def _fill_completion(self): + for cmd in self.cmd('query-commands')['return']: + self._completer.append(cmd['name']) +@@ -400,7 +382,7 @@ def main(): + + if qemu is None: + fail_cmdline() +- except QMPShellBadPort: ++ except qmp.QMPShellBadPort: + die('bad port number in command-line') + + try: +diff --git a/scripts/qmp/qmp.py b/scripts/qmp/qmp.py +index 62d3651..261ece8 100644 +--- a/scripts/qmp/qmp.py ++++ b/scripts/qmp/qmp.py +@@ -25,21 +25,23 @@ class QMPCapabilitiesError(QMPError): + class QMPTimeoutError(QMPError): + pass + ++class QMPShellBadPort(QMPError): ++ pass ++ + class QEMUMonitorProtocol: + def __init__(self, address, server=False, debug=False): + """ + Create a QEMUMonitorProtocol class. + + @param address: QEMU address, can be either a unix socket path (string) +- or a tuple in the form ( address, port ) for a TCP +- connection ++ or a TCP endpoint (string in the format "host:port") + @param server: server mode listens on the socket (bool) + @raise socket.error on socket connection errors + @note No connection is established, this is done by the connect() or + accept() methods + """ + self.__events = [] +- self.__address = address ++ self.__address = self.__get_address(address) + self._debug = debug + self.__sock = self.__get_sock() + if server: +@@ -47,6 +49,21 @@ class QEMUMonitorProtocol: + self.__sock.bind(self.__address) + self.__sock.listen(1) + ++ def __get_address(self, arg): ++ """ ++ Figure out if the argument is in the port:host form, if it's not it's ++ probably a file path. ++ """ ++ addr = arg.split(':') ++ if len(addr) == 2: ++ try: ++ port = int(addr[1]) ++ except ValueError: ++ raise QMPShellBadPort ++ return ( addr[0], port ) ++ # socket path ++ return arg ++ + def __get_sock(self): + if isinstance(self.__address, tuple): + family = socket.AF_INET +-- +2.7.4 + |