1 files changed, 54 insertions, 0 deletions
diff --git a/results/classifier/118/graphic/1943 b/results/classifier/118/graphic/1943
new file mode 100644
index 000000000..3d45d5d76
--- /dev/null
+++ b/results/classifier/118/graphic/1943
@@ -0,0 +1,54 @@
+graphic: 0.966
+mistranslation: 0.945
+device: 0.792
+performance: 0.697
+semantic: 0.645
+architecture: 0.598
+PID: 0.548
+socket: 0.487
+kernel: 0.482
+ppc: 0.475
+network: 0.461
+vnc: 0.457
+files: 0.457
+i386: 0.449
+user-level: 0.441
+x86: 0.417
+assembly: 0.405
+register: 0.388
+debug: 0.381
+hypervisor: 0.376
+TCG: 0.371
+KVM: 0.340
+risc-v: 0.334
+arm: 0.295
+boot: 0.293
+VMM: 0.289
+peripherals: 0.286
+virtual: 0.283
+permissions: 0.192
+
+Weird error trying to autodetect CHS disk geometry
+Description of problem:
+Error: "SSD Read Error"
+
+Something about the contents of the disk causes qemu to wildly misdetect the disk geometry.
+This disk started as a blank disk, and had a FAT filesystem written to it from inside it; thus
+writing the detected geometry to the disk. And this caused the detected geometry to change to
+something nonsensical.
+Steps to reproduce:
+1. Unpack the attached [hd.bz2](/uploads/53f5bb00cdd563223bea1f7a0f86fe1c/hd.bz2) to hd.img
+2. Run qemu -hda hd.img
+3. Observe error
+Additional information:
+The following command appears to fix the problem; however it is wrong:
+
+qemu -drive if=none,id=dr,file=hd.img -device ide-hd,drive=dr,cyls=1023,heads=16,secs=63
+
+The problem with this command is this command yields only 504MB instead of the 512MB the
+disk is actually formatted to be. CHS translation should be enabled on this disk but won't
+be with this command.
+
+This command was copied essentially blindly from "Removed features" because that's what comes
+up for a google search for "qemu specify geometry" and I don't understand the command well
+enough to correct it.