diff options
Diffstat (limited to 'results/classifier/accel-gemma3:12b/kvm/2945')
| -rw-r--r-- | results/classifier/accel-gemma3:12b/kvm/2945 | 30 |
1 files changed, 30 insertions, 0 deletions
diff --git a/results/classifier/accel-gemma3:12b/kvm/2945 b/results/classifier/accel-gemma3:12b/kvm/2945 new file mode 100644 index 000000000..bdb7378f2 --- /dev/null +++ b/results/classifier/accel-gemma3:12b/kvm/2945 @@ -0,0 +1,30 @@ + +Commit da954d0e introduces a regression on sifive_unleashed when booting from SD card +Description of problem: +In U-Boot CI, we started to update from v8.2.0 to v9.2.3 and found that the sifive_unleashed target was failing to boot from SD card in our tests (we also test via SPI and this is fine). I have bisected the problem down to commit [da954d0e ("hw/sd/sdcard: Add spi_cmd_SEND_CSD/CID handlers (CMD9 & CMD10)")](https://gitlab.com/qemu-project/qemu/-/commit/da954d0e32444f122a41c24948d4d1c718bf66d4). + +When running QEMU we see the following output in the failure case as the only output: +``` +U-Boot SPL 2025.07-rc1-00033-gad60d9792896 (May 01 2025 - 17:08:34 +0000) +Trying to boot from MMC1 +spl: mmc init failed with error: -110 +Error: -110 +SPL: failed to boot from all boot devices +# +Steps to reproduce: +1. wget -O - https://github.com/pengutronix/genimage/releases/download/v14/genimage-14.tar.xz | tar -C /tmp -xJ ; cd /tmp/genimage-14 +2. ./configure && make -j$(nproc) +3. git clone https://source.denx.de/u-boot/u-boot.git; cd u-boot +4. wget -O - https://github.com/riscv-software-src/opensbi/releases/download/v1.3.1/opensbi-1.3.1-rv-bin.tar.xz | tar -C /tmp -xJ +5. export OPENSBI=/tmp/opensbi-1.3.1-rv-bin/share/opensbi/lp64/generic/firmware/fw_dynamic.bin +6. make O=/tmp/sifive_unleashed CROSS_COMPILE=riscv64-linux- sifive_unleashed_defconfig +7. make O=/tmp/sifive_unleashed CROSS_COMPILE=riscv64-linux- -sj$(nproc) +8. mkdir -p root +9. cp /tmp/sifive_unleashed/spl/u-boot-spl.bin . +10. cp /tmp/sifive_unleashed/u-boot.itb . +11. rm -rf tmp +12. genimage --inputpath . --config board/sifive/unleashed/genimage_sdcard.cfg +13. cp images/sdcard.img /tmp/sifive_unleashed/ +14. qemu-system-riscv64 -smp 5 -m 8G -nographic -M sifive_u,msel=11 -bios /tmp/sifive_unleashed/spl/u-boot-spl.bin -drive file=/tmp/sifive_unleashed/sdcard.img,format=raw,if=sd +Additional information: +The genimage tool is required for making the disk images used here. If building everything here is too much, I can provide the U-Boot binaries needed here out of band. |