diff options
Diffstat (limited to 'results/classifier/deepseek-2-tmp/output/performance/568228')
| -rw-r--r-- | results/classifier/deepseek-2-tmp/output/performance/568228 | 259 |
1 files changed, 0 insertions, 259 deletions
diff --git a/results/classifier/deepseek-2-tmp/output/performance/568228 b/results/classifier/deepseek-2-tmp/output/performance/568228 deleted file mode 100644 index f528cdc05..000000000 --- a/results/classifier/deepseek-2-tmp/output/performance/568228 +++ /dev/null @@ -1,259 +0,0 @@ - -/home/qemu-0.12.3/tcg/tcg.c:1367: tcg fatal error - -I get the following error each time I start emulation in QEMU 0.12.3 on a Sun SunFire 280R running Debian Lenny 5.03 for Sparc64: - -/home/qemu-0.12.3/tcg/tcg.c:1367: tcg fatal error - -I had the same problem in Qemu 0.11.1. - -Here are informations about my system, I am not a programmer so I don't know what information to give, if you need more info just ask me: - -sunfire:/home# uname -a -Linux sunfire 2.6.26 #1 Thu Apr 8 17:09:17 EDT 2010 sparc64 GNU/Linux -sunfire:/home# dmesg -nges: -[ 0.000000] Normal 0 -> 130933 -[ 0.000000] Movable zone start PFN for each node -[ 0.000000] early_node_map[7] active PFN ranges -[ 0.000000] 0: 0 -> 129023 -[ 0.000000] 0: 129024 -> 130666 -[ 0.000000] 0: 130796 -> 130803 -[ 0.000000] 0: 130805 -> 130815 -[ 0.000000] 0: 130818 -> 130826 -[ 0.000000] 0: 130828 -> 130916 -[ 0.000000] 0: 130919 -> 130933 -[ 0.000000] On node 0 totalpages: 130792 -[ 0.000000] Normal zone: 896 pages used for memmap -[ 0.000000] Normal zone: 0 pages reserved -[ 0.000000] Normal zone: 129896 pages, LIFO batch:15 -[ 0.000000] Movable zone: 0 pages used for memmap -[ 0.000000] Booting Linux... -[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129896 -[ 0.000000] Kernel command line: root=/dev/sdb2 ro -[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) -[ 0.000000] clocksource: mult[c80000] shift[16] -[ 0.000000] clockevent: mult[147ae14] shift[32] -[ 380.165881] Console: colour dummy device 80x25 -[ 380.183520] console handover: boot [earlyprom0] -> real [tty0] -[ 380.208131] Dentry cache hash table entries: 131072 (order: 7, 1048576 bytes) -[ 380.210503] Inode-cache hash table entries: 65536 (order: 6, 524288 bytes) -[ 380.235415] Memory: 1022064k available (4952k kernel code, 2064k data, 192k init) [fffff80000000000,000000003feea000] -[ 380.312667] Calibrating delay using timer specific routine.. 9.99 BogoMIPS (lpj=19990) -[ 380.312839] Security Framework initialized -[ 380.312870] SELinux: Disabled at boot. -[ 380.312889] Capability LSM initialized -[ 380.312935] Mount-cache hash table entries: 512 -[ 380.313505] Initializing cgroup subsys ns -[ 380.313524] Initializing cgroup subsys cpuacct -[ 380.313536] Initializing cgroup subsys devices -[ 380.314346] net_namespace: 1208 bytes -[ 380.314892] NET: Registered protocol family 16 -[ 380.325288] PCI: Probing for controllers. -[ 380.325332] /pci@8,700000: SCHIZO PCI Bus Module ver[4:0] -[ 380.325349] /pci@8,700000: PCI IO[7ffef000000] MEM[7fe00000000] -[ 380.329864] /pci@8,600000: SCHIZO PCI Bus Module ver[4:0] -[ 380.329881] /pci@8,600000: PCI IO[7ffed000000] MEM[7fd00000000] -[ 380.334466] PCI: Scanning PBM /pci@8,600000 -[ 380.334976] PCI: Scanning PBM /pci@8,700000 -[ 380.336347] ebus0: [flashprom] [bbc] [ppm] [i2c -> (dimm-fru) (dimm-fru) (dimm-fru) (dimm-fru) (nvram) (idprom)] [i2c -> (cpu-fru) (temperature) (fan-control) (motherboard-fru) (i2c-bridge)] [beep] [rtc] [gpio] [pmc] [floppy] [parallel] [serial] -[ 380.349031] usbcore: registered new interface driver usbfs -[ 380.349274] usbcore: registered new interface driver hub -[ 380.349452] usbcore: registered new device driver usb -[ 380.353275] /pci@8,700000/ebus@5/rtc@1,300070: Clock regs at 000007fe7e300070 -[ 380.354631] NET: Registered protocol family 2 -[ 380.356677] Switched to high resolution mode on CPU 0 -[ 380.388803] IP route cache hash table entries: 8192 (order: 3, 65536 bytes) -[ 380.389510] TCP established hash table entries: 32768 (order: 6, 524288 bytes) -[ 380.391238] TCP bind hash table entries: 32768 (order: 5, 262144 bytes) -[ 380.392036] TCP: Hash tables configured (established 32768 bind 32768) -[ 380.392052] TCP reno registered -[ 380.400796] NET: Registered protocol family 1 -[ 380.401078] checking if image is initramfs... it is -[ 381.658428] Freeing initrd memory: 5829k freed -[ 381.659077] Mini RTC Driver -[ 381.659365] /memory-controller@0,400000: US3 memory controller at 0000040000400000 [ACTIVE] -[ 381.660085] audit: initializing netlink socket (disabled) -[ 381.660134] type=2000 audit(1271905721.644:1): initialized -[ 381.660454] Total HugeTLB memory allocated, 0 -[ 381.660756] VFS: Disk quotas dquot_6.5.1 -[ 381.660865] Dquot-cache hash table entries: 1024 (order 0, 8192 bytes) -[ 381.661363] Installing knfsd (copyright (C) 1996 <email address hidden>). -[ 381.662280] NTFS driver 2.1.29 [Flags: R/W]. -[ 381.662397] msgmni has been set to 2009 -[ 381.662746] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) -[ 381.662775] io scheduler noop registered -[ 381.662788] io scheduler anticipatory registered -[ 381.662801] io scheduler deadline registered -[ 381.662844] io scheduler cfq registered (default) -[ 381.668602] Console: switching to colour frame buffer device 80x30 -[ 381.672374] fb0: TVP4020 frame buffer device, memory = 8192K. -[ 381.681745] [drm] Initialized drm 1.1.0 20060810 -[ 381.683020] f0086398: ttyS0 at MMIO 0x7fe7e400000 (irq = 10) is a SAB82532 V3.2 -[ 381.686005] f0086398: ttyS1 at MMIO 0x7fe7e400040 (irq = 10) is a SAB82532 V3.2 -[ 381.694246] brd: module loaded -[ 381.698234] loop: module loaded -[ 381.700507] sungem.c:v0.98 8/24/03 David S. Miller (<email address hidden>) -[ 381.703764] PHY ID: 18074c1, addr: 0 -[ 381.704753] eth0: Sun GEM (PCI) 10/100/1000BaseT Ethernet 00:03:ba:12:bb:58 -[ 381.707196] eth0: Found Generic MII PHY -[ 381.709903] Uniform Multi-Platform E-IDE driver -[ 381.712557] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx -[ 381.719917] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver -[ 381.719963] ohci_hcd 0000:00:05.3: OHCI Host Controller -[ 381.723674] ohci_hcd 0000:00:05.3: new USB bus registered, assigned bus number 1 -[ 381.731670] ohci_hcd 0000:00:05.3: irq 13, io mem 0x7fe01000000 -[ 381.792942] usb usb1: configuration #1 chosen from 1 choice -[ 381.797235] hub 1-0:1.0: USB hub found -[ 381.801563] hub 1-0:1.0: 4 ports detected -[ 381.909230] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 -[ 381.913796] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 -[ 381.923701] usb usb1: Product: OHCI Host Controller -[ 381.928419] usb usb1: Manufacturer: Linux 2.6.26 ohci_hcd -[ 381.933108] usb usb1: SerialNumber: 0000:00:05.3 -[ 381.937761] USB Universal Host Controller Interface driver v3.0 -[ 381.942637] mice: PS/2 mouse device common for all mice -[ 382.164665] usb 1-2: new low speed USB device using ohci_hcd and address 2 -[ 382.331310] usb 1-2: configuration #1 chosen from 1 choice -[ 382.336918] usb 1-2: New USB device found, idVendor=049f, idProduct=000e -[ 382.341070] usb 1-2: New USB device strings: Mfr=4, Product=20, SerialNumber=0 -[ 382.349921] usb 1-2: Product: Compaq Internet Keyboard -[ 382.354146] usb 1-2: Manufacturer: Chicony -[ 382.612663] usb 1-3: new full speed USB device using ohci_hcd and address 3 -[ 382.777825] usb 1-3: configuration #1 chosen from 1 choice -[ 382.783275] usb 1-3: New USB device found, idVendor=058f, idProduct=6387 -[ 382.787329] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 -[ 382.791996] usb 1-3: Product: Mass Storage -[ 382.795814] usb 1-3: Manufacturer: Generic -[ 382.799482] usb 1-3: SerialNumber: 0AC899D6 -[ 383.056664] usb 1-4: new low speed USB device using ohci_hcd and address 4 -[ 383.221349] usb 1-4: configuration #1 chosen from 1 choice -[ 383.226691] usb 1-4: New USB device found, idVendor=045e, idProduct=0039 -[ 383.230537] usb 1-4: New USB device strings: Mfr=1, Product=3, SerialNumber=0 -[ 383.235076] usb 1-4: Product: Microsoft 5-Button Mouse with IntelliEye(TM) -[ 383.238730] usb 1-4: Manufacturer: Microsoft -[ 383.248269] input: Chicony Compaq Internet Keyboard as /class/input/input0 -[ 383.264794] input,hidraw0: USB HID v1.10 Keyboard [Chicony Compaq Internet Keyboard] on usb-0000:00:05.3-2 -[ 383.286678] input: Chicony Compaq Internet Keyboard as /class/input/input1 -[ 383.304765] input,hidraw1: USB HID v1.10 Device [Chicony Compaq Internet Keyboard] on usb-0000:00:05.3-2 -[ 383.317738] input: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM) as /class/input/input2 -[ 383.340859] input,hidraw2: USB HID v1.10 Mouse [Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)] on usb-0000:00:05.3-4 -[ 383.349107] usbcore: registered new interface driver usbhid -[ 383.353153] usbhid: v2.6:USB HID core driver -[ 383.357245] Advanced Linux Sound Architecture Driver Version 1.0.16. -[ 383.402450] PCI: Enabling device: (0000:00:03.0), cmd 1 -[ 384.100863] eth0: Link is up at 100 Mbps, full-duplex. -[ 384.846600] usbcore: registered new interface driver snd-usb-audio -[ 384.851077] ALSA device list: -[ 384.855394] #0: Ensoniq AudioPCI ENS1371 at 0x7ffef000500, irq 17 -[ 384.861036] TCP cubic registered -[ 384.865480] NET: Registered protocol family 17 -[ 384.870147] RPC: Registered udp transport module. -[ 384.874530] RPC: Registered tcp transport module. -[ 384.879100] registered taskstats version 1 -[ 384.883476] drivers/rtc/hctosys.c: unable to open rtc device (rtc0) -[ 386.429586] SCSI subsystem initialized -[ 386.509039] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[12] MMIO=[7fe00120000-7fe001207ff] Max Packet=[2048] IR/IT contexts=[4/4] -[ 386.596175] QLogic Fibre Channel HBA Driver: 8.02.01-k4 -[ 386.600382] PCI: Enabling device: (0001:00:04.0), cmd 3 -[ 386.602464] qla2xxx 0001:00:04.0: Found an ISP2200, irq 20, iobase 0x000007fd00100000 -[ 386.612339] qla2xxx 0001:00:04.0: Configuring PCI space... -[ 386.616586] qla2xxx 0001:00:04.0: Configure NVRAM parameters... -[ 386.714919] qla2xxx 0001:00:04.0: Inconsistent NVRAM detected: checksum=0x0 id=<4>qla2xxx 0001:00:04.0: Falling back to functioning (yet invalid -- WWPN) defaults. -[ 386.728340] qla2xxx 0001:00:04.0: Verifying loaded RISC code... -[ 386.734153] PCI: Enabling device: (0000:00:06.0), cmd 147 -[ 386.735307] sym0: <875> rev 0x37 at pci 0000:00:06.0 irq 14 -[ 386.826112] sym0: No NVRAM, ID 7, Fast-20, SE, parity checking -[ 386.837235] sym0: SCSI BUS has been reset. -[ 386.841214] scsi1 : sym-2.2.3 -[ 386.847653] PCI: Enabling device: (0000:00:06.1), cmd 147 -[ 386.848824] sym1: <875> rev 0x37 at pci 0000:00:06.1 irq 15 -[ 386.939517] sym1: No NVRAM, ID 7, Fast-20, SE, parity checking -[ 386.950672] sym1: SCSI BUS has been reset. -[ 386.954818] scsi2 : sym-2.2.3 -[ 386.965219] firmware: requesting ql2200_fw.bin -[ 387.039293] Initializing USB Mass Storage driver... -[ 387.043558] scsi3 : SCSI emulation for USB Mass Storage devices -[ 387.050004] usbcore: registered new interface driver usb-storage -[ 387.054012] USB Mass Storage support registered. -[ 387.057924] usb-storage: device found at 3 -[ 387.057930] usb-storage: waiting for device to settle before scanning -[ 388.004887] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0003bafffe12bb58] -[ 391.590521] scsi 1:0:6:0: CD-ROM TOSHIBA DVD-ROM SD-M1401 1009 PQ: 0 ANSI: 2 -[ 391.599122] target1:0:6: Beginning Domain Validation -[ 391.603264] target1:0:6: asynchronous -[ 391.608968] target1:0:6: FAST-20 SCSI 20.0 MB/s ST (50 ns, offset 16) -[ 391.614104] target1:0:6: Domain Validation skipping write tests -[ 391.618025] target1:0:6: Ending Domain Validation -[ 392.057675] usb-storage: device scan complete -[ 392.063643] scsi 3:0:0:0: Direct-Access Generic Flash Disk 8.07 PQ: 0 ANSI: 2 -[ 394.008952] Driver 'sr' needs updating - please use bus_type methods -[ 394.017708] sr0: scsi3-mmc drive: 40x/40x cd/rw xa/form2 cdda tray -[ 394.021916] Uniform CD-ROM driver Revision: 3.20 -[ 394.026310] sr 1:0:6:0: Attached scsi CD-ROM sr0 -[ 394.056732] sr 1:0:6:0: Attached scsi generic sg0 type 5 -[ 394.357542] scsi 3:0:0:0: Attached scsi generic sg1 type 0 -[ 394.413753] Driver 'sd' needs updating - please use bus_type methods -[ 394.437062] sd 3:0:0:0: [sda] 4103936 512-byte hardware sectors (2101 MB) -[ 394.450042] sd 3:0:0:0: [sda] Write Protect is off -[ 394.454315] sd 3:0:0:0: [sda] Mode Sense: 03 00 00 00 -[ 394.454322] sd 3:0:0:0: [sda] Assuming drive cache: write through -[ 394.481010] sd 3:0:0:0: [sda] 4103936 512-byte hardware sectors (2101 MB) -[ 394.493994] sd 3:0:0:0: [sda] Write Protect is off -[ 394.498261] sd 3:0:0:0: [sda] Mode Sense: 03 00 00 00 -[ 394.498268] sd 3:0:0:0: [sda] Assuming drive cache: write through -[ 394.502483] sda: -[ 394.548320] sd 3:0:0:0: [sda] Attached SCSI removable disk -[ 397.912726] qla2xxx 0001:00:04.0: Allocated (252 KB) for firmware dump... -[ 398.044667] qla2xxx 0001:00:04.0: LIP reset occured (f8ef). -[ 398.049170] scsi0 : qla2xxx -[ 398.054582] qla2xxx 0001:00:04.0: -[ 398.054586] QLogic Fibre Channel HBA Driver: 8.02.01-k4 -[ 398.054590] QLogic QLA22xx - -[ 398.054592] ISP2200: PCI (66 MHz) @ 0001:00:04.0 hdma-, host#=0, fw=2.02.08 TP -[ 398.091669] qla2xxx 0001:00:04.0: LIP occured (f8ef). -[ 398.097133] qla2xxx 0001:00:04.0: LOOP UP detected (1 Gbps). -[ 398.110704] scsi 0:0:0:0: Direct-Access SEAGATE ST336605FSUN36G 0638 PQ: 0 ANSI: 3 -[ 398.126430] scsi 0:0:1:0: Direct-Access SEAGATE ST336605FSUN36G 0638 PQ: 0 ANSI: 3 -[ 398.144907] scsi: waiting for bus probes to complete ... -[ 398.153043] sd 0:0:0:0: [sdb] 71132959 512-byte hardware sectors (36420 MB) -[ 398.159977] sd 0:0:0:0: [sdb] Write Protect is off -[ 398.164380] sd 0:0:0:0: [sdb] Mode Sense: db 00 10 08 -[ 398.168750] sd 0:0:0:0: [sdb] Write cache: disabled, read cache: enabled, supports DPO and FUA -[ 398.181593] sd 0:0:0:0: [sdb] 71132959 512-byte hardware sectors (36420 MB) -[ 398.188754] sd 0:0:0:0: [sdb] Write Protect is off -[ 398.193390] sd 0:0:0:0: [sdb] Mode Sense: db 00 10 08 -[ 398.197775] sd 0:0:0:0: [sdb] Write cache: disabled, read cache: enabled, supports DPO and FUA -[ 398.207949] sdb: sdb1 sdb2 sdb3 sdb4 -[ 398.219180] sd 0:0:0:0: [sdb] Attached SCSI disk -[ 398.223902] sd 0:0:0:0: Attached scsi generic sg2 type 0 -[ 398.232492] sd 0:0:1:0: [sdc] 71132959 512-byte hardware sectors (36420 MB) -[ 398.239757] sd 0:0:1:0: [sdc] Write Protect is off -[ 398.244397] sd 0:0:1:0: [sdc] Mode Sense: db 00 10 08 -[ 398.249021] sd 0:0:1:0: [sdc] Write cache: disabled, read cache: enabled, supports DPO and FUA -[ 398.262681] sd 0:0:1:0: [sdc] 71132959 512-byte hardware sectors (36420 MB) -[ 398.270173] sd 0:0:1:0: [sdc] Write Protect is off -[ 398.274917] sd 0:0:1:0: [sdc] Mode Sense: db 00 10 08 -[ 398.279543] sd 0:0:1:0: [sdc] Write cache: disabled, read cache: enabled, supports DPO and FUA -[ 398.289888] sdc: sdc1 sdc3 -[ 398.304581] sd 0:0:1:0: [sdc] Attached SCSI disk -[ 398.309417] sd 0:0:1:0: Attached scsi generic sg3 type 0 -[ 398.768132] kjournald starting. Commit interval 5 seconds -[ 398.772864] EXT3-fs: mounted filesystem with ordered data mode. -[ 401.026534] udevd version 125 started -[ 405.141436] Adding 1566320k swap on /dev/sdb4. Priority:-1 extents:1 across:1566320k -[ 405.604286] EXT3 FS on sdb2, internal journal -[ 408.242503] eth0: Link is up at 100 Mbps, full-duplex. -[ 408.249685] eth0: Pause is disabled -[ 410.325778] NET: Registered protocol family 10 -[ 410.330075] lo: Disabled Privacy Extensions -[ 414.287849] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory -[ 414.307535] NFSD: starting 90-second grace period -[ 418.763886] NET: Registered protocol family 5 -[ 420.772658] eth0: no IPv6 routers present -[ 550.132380] ioctl32(xfce4-terminal:3010): Unknown cmd fd(8) cmd(0000530b){t:'S';sz:0} arg(f7e8a380) on /dev/pts/0 -[ 550.132405] ioctl32(xfce4-terminal:3010): Unknown cmd fd(8) cmd(0000530b){t:'S';sz:0} arg(f7e8a388) on /dev/pts/0 -[ 550.132420] ioctl32(xfce4-terminal:3010): Unknown cmd fd(8) cmd(0000530b){t:'S';sz:0} arg(f7e8a390) on /dev/pts/0 -[ 2388.411343] ioctl32(synaptic:3478): Unknown cmd fd(16) cmd(0000530b){t:'S';sz:0} arg(f755a380) on /dev/pts/1 -[ 2388.411368] ioctl32(synaptic:3478): Unknown cmd fd(16) cmd(0000530b){t:'S';sz:0} arg(f755a388) on /dev/pts/1 -[ 2388.411383] ioctl32(synaptic:3478): Unknown cmd fd(16) cmd(0000530b){t:'S';sz:0} arg(f755a390) on /dev/pts/1 \ No newline at end of file |