diff options
Diffstat (limited to 'results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction')
191 files changed, 782 insertions, 0 deletions
diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1028 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1028 new file mode 100644 index 000000000..94a2298f4 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1028 @@ -0,0 +1,3 @@ +The issue relates to an assertion failure within QEMU's TCG (Tiny Code Generator) when handling a specific RISC-V instruction (vmv.v.x) under certain conditions. This involves the generation of vector operations and type duplication, which points directly to a problem with how instructions are being translated or handled. + +**instruction** \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1051 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1051 new file mode 100644 index 000000000..35e6084b4 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1051 @@ -0,0 +1,11 @@ +The bug report mentions "or1k tcg SIGILL". Here's how it fits into the categories: + +- **instruction**: The term "tcg" refers to Tiny Code Generator, which is related to instruction generation in QEMU. A SIGILL (Illegal Instruction) signal typically indicates that an invalid or undefined instruction was encountered. + +- **syscall**: There's no mention of system calls here, so this doesn't seem relevant. + +- **runtime**: While the error occurs at runtime, it's more specifically tied to an illegal instruction generated by TCG. + +Therefore, the most appropriate category is: + +**instruction** \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1079080 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1079080 new file mode 100644 index 000000000..39b9cdb0a --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1079080 @@ -0,0 +1,3 @@ +The issue describes a problem with the behavior of the ARM instruction "srs" in QEMU, where it incorrectly stores the CPSR instead of the SPSR. This directly relates to an error in how a specific instruction is implemented. + +Answer: instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1086 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1086 new file mode 100644 index 000000000..fa0294638 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1086 @@ -0,0 +1,5 @@ +The issue arises when running NumPy/SciPy test suites under QEMU emulation on ppc64le but not on aarch64. The failures indicate problems like array values being garbage, permuted, or fundamentally different (e.g., zero vs non-zero), which suggest issues in how floating-point operations are handled during emulation. + +These symptoms point to errors in the translation of instructions, particularly those involving floating-point arithmetic, rather than system calls or general runtime issues. Therefore, the category is: + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1092 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1092 new file mode 100644 index 000000000..9b8a572c1 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1092 @@ -0,0 +1 @@ +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1095531 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1095531 new file mode 100644 index 000000000..571f9d9e0 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1095531 @@ -0,0 +1,3 @@ +The issue described involves incorrect code generation for SPARC32plus on 64-bit hosts, specifically with load and store operations. The problem arises from improper handling during the translation process in `translate.c`, leading to access violations. This is an example of a faulty instruction being generated. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1095857 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1095857 new file mode 100644 index 000000000..818d5045f --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1095857 @@ -0,0 +1,3 @@ +The issue pertains to how QEMU handles addresses when using Address-Size overrides in Long Mode on x86-64 architecture. The problem arises from incorrect address calculations leading to General Protection Exceptions due to non-canonical memory addresses. This is related to instruction execution rather than syscalls or general runtime errors. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1128 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1128 new file mode 100644 index 000000000..a116d6320 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1128 @@ -0,0 +1,5 @@ +The issue pertains to how the `spr_write_xer()` function handles setting specific flag bits in the `cpu_xer` variable within QEMU's PowerPC (PPC) target emulation. The problem arises because the function fails to set certain flags like `ca`, `ov`, `so`, etc., due to the use of a bitwise NOT operator (`~`) that excludes these bits from being copied. This discrepancy affects tools that rely on tracing CPU state, as they expect accurate reflection of all flag bits in `cpu_xer`. The proposed fix involves removing the `~` operator to include these flags correctly. + +This bug is classified under "instruction" because it relates to how a specific instruction (`mtxer`) is emulated and handled within QEMU's translation layer. The incorrect handling affects the state maintained by the emulator, which can lead to issues in debugging and analysis tools that depend on accurate CPU state information. + +**Answer:** instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1129571 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1129571 new file mode 100644 index 000000000..622ae0d0b --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1129571 @@ -0,0 +1,3 @@ +The bug report indicates an "illegal instruction" error (code 4), which suggests that the issue is related to executing an invalid CPU instruction. This typically points to problems in handling specific instructions within the emulator, making it an instruction-related issue. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1156 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1156 new file mode 100644 index 000000000..9b8a572c1 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1156 @@ -0,0 +1 @@ +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1156313 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1156313 new file mode 100644 index 000000000..6c1466e4d --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1156313 @@ -0,0 +1,3 @@ +The bug report discusses issues related to improper handling of flags on x86-64 architecture in QEMU, specifically involving ADX instructions and context switching. This relates directly to how specific CPU instructions are managed within the emulator. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1178 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1178 new file mode 100644 index 000000000..4d6cd3bc8 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1178 @@ -0,0 +1,11 @@ +The user is asking whether the `feq.s` operation in RISC-V64 should only consider the lowest 32 bits and wants to classify this as part of a bug report within QEMU. The possible categories are "instruction," "syscall," or "runtime." + +First, I need to understand what `feq.s` does. In RISC-V, `feq.s` is a floating-point comparison instruction that checks if two single-precision floating-point numbers are equal. It operates on the F registers and sets a flag based on the comparison. + +The question suggests that there might be an issue with how QEMU handles this instruction, specifically whether it correctly processes only the lower 32 bits of the operands. If `feq.s` is not considering just the lower 32 bits when it should, this could lead to incorrect comparisons or errors in programs relying on this behavior. + +Since this bug relates to how a specific instruction (`feq.s`) is implemented or handled within QEMU, it falls under the category of an instruction-related issue rather than a system call error or a general runtime problem. + +Therefore, the appropriate classification for this bug report is "instruction." This helps in categorizing and addressing the issue more effectively within the QEMU development context. + +**Answer: instruction** \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/122 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/122 new file mode 100644 index 000000000..9b8a572c1 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/122 @@ -0,0 +1 @@ +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1221966 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1221966 new file mode 100644 index 000000000..4fd10eb11 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1221966 @@ -0,0 +1,7 @@ +The bug report indicates a SIGSEGV (Segmentation Fault) occurring in the `static_code_gen_buffer` function while running QEMU to emulate a SunOS 5.8 box on RHEL 6.4 Linux. The stack trace points to functions related to CPU execution and translation blocks, which are integral parts of QEMU's instruction emulation process. + +The error occurs during runtime when executing instructions, specifically within the `cpu_tb_exec` function, which is responsible for executing translated basic blocks (TBB) of guest code. This suggests that the issue lies in how QEMU generates or executes these translated instructions. + +Given this context, the bug falls under the category of an **instruction** error, as it relates to the emulation of guest instructions and the generation of machine code during runtime. + +**Answer:** instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1233225 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1233225 new file mode 100644 index 000000000..a0e452ff6 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1233225 @@ -0,0 +1,5 @@ +The issue here involves how floating-point operations are being handled differently when running under QEMU's user mode versus a fully emulated environment. The problem arises specifically with division operations involving floating-point numbers. This suggests that there might be an issue in how QEMU emulates certain instructions related to floating-point arithmetic. + +Given that the same binary behaves correctly in a fully emulated environment but produces incorrect results in user mode, it points towards a problem in the emulation of specific instructions rather than system calls or general runtime issues. + +**Answer: instruction** \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1245543 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1245543 new file mode 100644 index 000000000..542935a88 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1245543 @@ -0,0 +1,3 @@ +The issue described pertains to a specific problem with how QEMU emulates certain SSE4.1 instructions, particularly `pmovzxbw`. This instruction is supposed to zero-extend bytes to words within vectors but is incorrectly implemented, leading to incorrect output when run under QEMU compared to real hardware. The bug report focuses on the emulation of this instruction, which falls directly into the category of an instruction-level issue. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1246990 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1246990 new file mode 100644 index 000000000..5892bc5d7 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1246990 @@ -0,0 +1,3 @@ +The bug report indicates that running rjsupplicant under QEMU results in a segmentation fault. The stack trace points to an issue in `static_code_gen_buffer()`, which is related to instruction generation within QEMU's CPU emulation. This suggests a problem with how instructions are being handled or generated, rather than a system call error or other runtime issues. + +category: instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1248 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1248 new file mode 100644 index 000000000..5b14c8afb --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1248 @@ -0,0 +1,3 @@ +The bug report discusses issues with certain wide-string functions in glibc when using QEMU user emulation for s390x architecture. These functions are implemented in optimized assembler and might be behaving incorrectly due to faulty instructions or incorrect handling of specific CPU instructions. + +**instruction** \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1251 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1251 new file mode 100644 index 000000000..aec572483 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1251 @@ -0,0 +1,3 @@ +The bug report describes an issue where running a 64-bit binary compiled for Octeon using QEMU results in an "Illegal instruction" error. This indicates a problem with the execution of specific instructions that QEMU does not handle correctly. The user also mentions having a patch related to this, which further points to an issue with instruction emulation. + +**Answer:** instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1254786 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1254786 new file mode 100644 index 000000000..778efeb70 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1254786 @@ -0,0 +1,3 @@ +The bug report mentions an "illegal instruction" error during execution, specifically `ebc0` at address `f67e5662`. This indicates that the CPU encountered an opcode it couldn't recognize or execute, which falls under issues related to instructions. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1267 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1267 new file mode 100644 index 000000000..17d02c478 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1267 @@ -0,0 +1,3 @@ +The issue arises from an attempt to execute a binary using `qemu-i386`, leading to a segmentation fault. The backtraces show that the crash occurs during memory access operations (like `cpu_ldub_code`), which are related to instruction execution and translation in QEMU's TCG (Tiny Code Generator). There is no mention of system calls or runtime-specific issues, so it points towards an error in handling instructions. + +**Category: instruction** \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1267955 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1267955 new file mode 100644 index 000000000..b38a86514 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1267955 @@ -0,0 +1,3 @@ +The issue describes a problem with how QEMU handles the XOR instruction, specifically regarding the parity flag not being set correctly when `xor %eax,%eax` is used. This points to a fault within the emulator's handling of that specific instruction. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1283519 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1283519 new file mode 100644 index 000000000..92fd6f9cb --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1283519 @@ -0,0 +1,3 @@ +The bug report describes issues with QEMU incorrectly recognizing specific PowerPC Altivec rounding instructions (vrfim, vrfin, vrfiz). These are instructions within the instruction set architecture, so the appropriate category is: + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1308381 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1308381 new file mode 100644 index 000000000..1cc8ddb34 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1308381 @@ -0,0 +1,3 @@ +The bug report discusses an "Illegal instruction" error when running code compiled with certain ARMv8 intrinsics. These intrinsics are translated into specific ARM instructions that QEMU doesn't support. This falls under issues related to instructions not being handled correctly. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1328996 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1328996 new file mode 100644 index 000000000..2535854ac --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1328996 @@ -0,0 +1,3 @@ +The issue revolves around the incorrect handling of the `blr x30` instruction within QEMU's implementation. The problem is specific to how the emulator processes this particular machine-level instruction, leading to unexpected behavior when using the x30 register as an operand with `blr`. Since this pertains directly to how instructions are executed, it falls under the **instruction** category. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1339 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1339 new file mode 100644 index 000000000..da1b7e1b5 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1339 @@ -0,0 +1,7 @@ +The given bug report involves an assertion failure during the execution of specific RISC-V instructions within QEMU. The error message points to a problem in `decode_save_opc`, specifically when `ctx->insn_start` is null. This indicates an issue with how QEMU decodes or handles certain opcodes. + +Since this relates to instruction decoding and not system calls or general runtime errors, the appropriate category is: + +**instruction** + +Answer: **instruction** \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1361912 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1361912 new file mode 100644 index 000000000..c9c7c5264 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1361912 @@ -0,0 +1,3 @@ +The issue described involves a segmentation fault when running a MIPS64 executable under QEMU. This typically occurs due to an invalid memory access or dereference, which is generally related to instructions or operations being executed. Therefore, it falls under the category of an instruction-related error. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1368 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1368 new file mode 100644 index 000000000..6680e1602 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1368 @@ -0,0 +1,3 @@ +The issue involves an unexpected change in the value of the RAX register after executing specific assembly instructions. The problem seems to stem from how the instructions are being handled, possibly due to incorrect encoding or decoding of the instruction, leading to an unintended modification of RAX. This points towards a fault in the instruction itself. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1370 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1370 new file mode 100644 index 000000000..9b8a572c1 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1370 @@ -0,0 +1 @@ +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1371 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1371 new file mode 100644 index 000000000..b99b408f5 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1371 @@ -0,0 +1,3 @@ +The issue is related to an incorrect implementation of the `blsmsk` instruction in QEMU, leading to a different carry flag (CF) value compared to real CPU behavior. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1372 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1372 new file mode 100644 index 000000000..371a51d0a --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1372 @@ -0,0 +1,3 @@ +The bug report describes an issue with the BEXTR instruction in QEMU not producing the correct result compared to the CPU. This indicates a problem with how the instruction is implemented or handled within QEMU. + +**instruction** \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1373 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1373 new file mode 100644 index 000000000..a1e5e5c4e --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1373 @@ -0,0 +1,3 @@ +The bug report discusses an issue with specific x86 instructions (ADOX and ADCX) where their behavior differs from the CPU's expected results, particularly regarding the EFLAGS register. This indicates a problem with how these instructions are emulated in QEMU. + +**instruction** \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1374 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1374 new file mode 100644 index 000000000..9b8a572c1 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1374 @@ -0,0 +1 @@ +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1375 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1375 new file mode 100644 index 000000000..9b8a572c1 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1375 @@ -0,0 +1 @@ +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1376 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1376 new file mode 100644 index 000000000..48667a8e3 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1376 @@ -0,0 +1,3 @@ +The issue described revolves around the behavior of specific x86 instructions (LSL and LAR) within QEMU, where these instructions cause a crash despite functioning correctly on physical hardware. This points to a problem with how QEMU emulates these particular instructions. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1377 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1377 new file mode 100644 index 000000000..923a6dd73 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1377 @@ -0,0 +1,3 @@ +The issue arises from an x86 instruction (CVTSD2SS) causing QEMU to crash when accessing memory near page boundaries. This is related to how QEMU handles specific instructions that may lead to invalid memory accesses if not properly managed. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1404690 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1404690 new file mode 100644 index 000000000..1df148431 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1404690 @@ -0,0 +1,21 @@ +The provided bug report mentions an "Illegal instruction" error and includes details about CPU registers and program counters, which are directly related to instruction execution. This indicates that the issue is likely due to a faulty or unsupported instruction being executed by QEMU when running m68k binaries. + +**Step-by-step explanation:** + +1. **Identify the Error Type:** + - The error message `qemu: fatal: Illegal instruction` suggests that QEMU encountered an instruction it couldn't execute properly. + - This is a common indicator of an issue related to instruction emulation or decoding within QEMU. + +2. **Analyze the Context:** + - The user is using QEMU to emulate m68k binaries on a different architecture, which involves binary translation and instruction emulation. + - Problems like this often arise from unimplemented instructions, incorrect instruction handling, or bugs in the emulator's instruction decoding logic. + +3. **Exclude Other Categories:** + - **Syscall:** The error does not mention any specific system call failing, nor does it show a syscall-related issue in the strace output. + - **Runtime:** While this is a runtime error, the specific nature of the error points more directly to an instruction-level problem rather than a general runtime issue. + +4. **Conclusion:** + - The combination of an illegal instruction error and the context of cross-architecture emulation strongly suggests that this is an instruction-related bug within QEMU's m68k emulation. + +**Final Answer:** +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1412 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1412 new file mode 100644 index 000000000..966bead6b --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1412 @@ -0,0 +1,3 @@ +The bug report describes a segmentation fault caused by a null pointer dereference when executing specific SVE instructions under certain conditions in QEMU. This issue is related to an error in handling these instructions during runtime, specifically within the `sve_probe_page` function. + +**Answer:** instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1428352 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1428352 new file mode 100644 index 000000000..09d0ae2aa --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1428352 @@ -0,0 +1,5 @@ +The bug report discusses an incorrect implementation of the SYSRET instruction in QEMU's helper function for system calls. The issue specifically relates to how the stack selector (%ss) is loaded from the IA32_STAR model-specific register without correctly setting the privilege level bits (OR-ing with 3). This affects the behavior when returning to user mode, leading to a general protection fault upon interrupt handling. + +Given that the problem pertains to an error in implementing a specific CPU instruction (SYSRET), it falls under the "instruction" category. The report details how the faulty implementation leads to incorrect privilege levels in the stack segment selector and the resulting system instability, which aligns with issues related to instruction-level behavior rather than system calls or general runtime errors. + +**Answer:** instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1441 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1441 new file mode 100644 index 000000000..05431e822 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1441 @@ -0,0 +1,3 @@ +The issue arises from an assertion failure when executing a specific RISC-V vector instruction (`vfncvt.rtz.x.f.w`), leading to a crash in QEMU. The problem is tied to how this particular instruction is being handled within QEMU's translation process. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1469342 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1469342 new file mode 100644 index 000000000..9b8a572c1 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1469342 @@ -0,0 +1 @@ +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1471 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1471 new file mode 100644 index 000000000..168d8a9ed --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1471 @@ -0,0 +1,27 @@ +The issue arises from an SSL/TLS handshake failure when using QEMU's x86_64 emulator to run an AMD64 version of curl on an AArch64 host system. This suggests a problem related to how QEMU handles certain CPU instructions or cryptographic operations, potentially involving incorrect emulation of specific instructions used in SSL processing. + +**Step-by-Step Explanation:** + +1. **Identify the Problem Context:** The user reports that after commit `16fc5726a6`, running an AMD64 version of curl under QEMU's x86_64 emulator on an AArch64 host results in an SSL error, specifically `curl: (35) error:1416D07B:SSL routines:tls_process_key_exchange:bad signature`. This indicates a failure during the TLS key exchange process. + +2. **Analyze the Error Message:** The error message points to an issue in SSL/TLS processing—specifically, a "bad signature" during the key exchange phase. This is often related to cryptographic operations such as RSA or ECDSA signature verification or generation. + +3. **Consider Possible Causes:** + - **Instruction Emulation Issue:** QEMU might be incorrectly emulating certain x86_64 instructions that are used by curl for SSL/TLS processing. + - **System Call Handling:** Problems in how QEMU handles system calls related to cryptographic operations could lead to such errors. + - **Runtime Environment Misconfiguration:** Incorrect handling of CPU features or misconfiguration in the runtime environment could affect cryptographic functions. + +4. **Evaluate the Given Options:** + - **Instruction:** If QEMU is not correctly emulating specific x86_64 instructions used by curl's SSL/TLS library (e.g., for RSA, ECDSA, etc.), this would cause the observed failure. + - **Syscall:** Issues with system call translation (e.g., incorrect handling of cryptographic syscalls) could also lead to SSL errors. + - **Runtime:** General runtime issues might include memory corruption or incorrect state management affecting SSL operations. + +5. **Determine the Most Likely Category:** + - The error is tied to cryptographic processing, which heavily relies on specific CPU instructions for performance and correctness. A faulty instruction emulation in QEMU would directly impact these operations. + - While syscalls are also a possibility, modern TLS implementations often rely more on library functions optimized with specific instructions rather than kernel syscalls. + - Runtime issues could be broader but are less likely to manifest as a specific SSL error tied to a particular commit. + +6. **Conclusion:** The most plausible category is "instruction," as the failure likely stems from incorrect emulation of x86_64 instructions used in SSL/TLS processing by curl when run under QEMU's x86_64 emulator on an AArch64 host. + +**Final Answer:** +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1494 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1494 new file mode 100644 index 000000000..b797ad2a3 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1494 @@ -0,0 +1,3 @@ +The bug report indicates that there's a segmentation fault (SIGSEGV) occurring during the execution of a program under QEMU emulation. This suggests an issue with accessing memory improperly or attempting to execute an invalid instruction, which points to a problem at the instruction level. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1536 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1536 new file mode 100644 index 000000000..c7fd19651 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1536 @@ -0,0 +1,3 @@ +The issue involves test programs failing when using specific vector extract instructions (vextractbm, vextracthm, vextractwm, or vextractdm) on qemu-ppc64 but not on qemu-ppc64le. This points to a problem with how QEMU emulates these particular PowerPC instructions. + +**Category: instruction** \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1541 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1541 new file mode 100644 index 000000000..47307e240 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1541 @@ -0,0 +1,5 @@ +The bug report describes an issue with the placement of `G_NORETURN` in the code when using clang++ 15.0.7. The problem arises during compilation, specifically related to how attributes are used in the code. This is a compile-time error rather than a runtime error or an issue with instructions or syscalls. + +The error message indicates that the attribute list (from `G_NORETURN`, which expands to `[[noreturn]]`) cannot appear where it was placed. The compiler does not accept the syntax as written, leading to a build failure. This is strictly a compile-time issue and does not involve runtime behavior or system calls. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1553 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1553 new file mode 100644 index 000000000..075c404fb --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1553 @@ -0,0 +1,3 @@ +The issue arises from an implicit declaration of `qemu_close_to_socket`, indicating a problem with function declarations or usage in the source code, which is part of the build process rather than runtime execution. Therefore, it falls under the **instruction** category. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1574346 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1574346 new file mode 100644 index 000000000..9b8a572c1 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1574346 @@ -0,0 +1 @@ +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1590336 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1590336 new file mode 100644 index 000000000..3d62a8652 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1590336 @@ -0,0 +1,3 @@ +The bug report discusses an issue where QEMU incorrectly allows and executes v8-only instructions (like `vrintz`) on non-v8 CPUs, such as Cortex-A9. This is a problem related to how specific ARM instructions are handled by the emulator. + +**Answer:** instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1594069 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1594069 new file mode 100644 index 000000000..9b8a572c1 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1594069 @@ -0,0 +1 @@ +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1605123 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1605123 new file mode 100644 index 000000000..d249a23d4 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1605123 @@ -0,0 +1,3 @@ +The bug report discusses an issue with the PEXT instruction in QEMU's emulation, where it returns incorrect values and appears to swap arguments. This points to a problem with how the instruction is handled within QEMU itself, rather than issues related to system calls or general runtime errors. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1606 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1606 new file mode 100644 index 000000000..7d976ab31 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1606 @@ -0,0 +1,3 @@ +The issue involves a fence.i instruction not functioning as expected, leading to incorrect behavior during code execution. This relates directly to an instruction-level problem within the RISC-V implementation. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1611394 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1611394 new file mode 100644 index 000000000..9a30aeab9 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1611394 @@ -0,0 +1,3 @@ +The bug report discusses issues related to specific instructions (scalar single-precision floating-point) and their handling within QEMU's PowerPC emulation. It highlights incorrect tests for the MSR[SPV] bit in certain instruction definitions and suggests modifications to fix these issues. + +**instruction** \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1612 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1612 new file mode 100644 index 000000000..5d918b956 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1612 @@ -0,0 +1,3 @@ +The issue revolves around incorrect behavior of specific SVE instructions (ldff1d) when certain conditions are met, leading to data corruption. This falls under a problem with how an instruction is implemented or handled within QEMU. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1613817 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1613817 new file mode 100644 index 000000000..f43c7eaeb --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1613817 @@ -0,0 +1,3 @@ +The bug report discusses an issue where certain return instructions (ret, lret, iret) in QEMU handle noncanonical IP addresses incorrectly compared to native CPU behavior. This directly relates to how specific instructions are emulated within QEMU. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1620 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1620 new file mode 100644 index 000000000..84c36df90 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1620 @@ -0,0 +1,3 @@ +The issue lies in how the outer product instruction handles elements across different tiles, specifically tile 1 in this case. The incorrect result suggests a problem with the `fmopa` instruction's implementation when using higher-numbered tiles, which points to a fault in the instruction itself. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1637 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1637 new file mode 100644 index 000000000..211aa9443 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1637 @@ -0,0 +1,3 @@ +The issue involves a crash when executing `ucomiss` instructions while emulating an x86-64 CPU on an AArch64 host within QEMU. This directly relates to a problem with handling specific instructions during emulation. + +(instruction) \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1641637 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1641637 new file mode 100644 index 000000000..be406c692 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1641637 @@ -0,0 +1,5 @@ +The issue arises because QEMU does not support certain x86-64 instructions that are being used in the compiled binary. These instructions are valid and execute correctly on real hardware but cause an illegal instruction error when run under QEMU. This indicates a problem with how QEMU emulates or handles specific CPU instructions. + +The bug is classified as: + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1642 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1642 new file mode 100644 index 000000000..9a4872805 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1642 @@ -0,0 +1,4 @@ +The bug report describes an issue where QEMU crashes when emulating an STXP instruction on a Windows host. The problem is traced back to a specific change involving `helper_atomic_cmpxchgo_le` and I128 arguments, leading to a segmentation fault during runtime. + +**Answer:** +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1701821 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1701821 new file mode 100644 index 000000000..f1b2c0fb3 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1701821 @@ -0,0 +1,3 @@ +The bug report describes issues related to incorrect behavior during the execution of specific instructions on an SH4 processor when using QEMU. The problems manifest as uncaught signals and abnormal exits during various floating-point operations, which points to issues in how instructions are being handled rather than system calls or general runtime errors. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1713066 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1713066 new file mode 100644 index 000000000..9b8a572c1 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1713066 @@ -0,0 +1 @@ +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1722 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1722 new file mode 100644 index 000000000..511100252 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1722 @@ -0,0 +1,5 @@ +The issue arises from an illegal `exts` instruction encountered while running a MIPS N32 executable under QEMU. The problem is traced back to the dynamic linker (`ld.so.1`), where the `exts` instruction causes an exception. This indicates that either the instruction is not correctly handled by QEMU's emulator for the MIPS N32 architecture or there is an incompatibility in the instruction set implementation. + +**Category: instruction** + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1725267 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1725267 new file mode 100644 index 000000000..ac8cc2b8b --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1725267 @@ -0,0 +1,7 @@ +The issue described involves an unexpected behavior change between different versions of QEMU when running specific test cases related to atomic operations. The problem manifests as an application crash (aborted) and a core dump, indicating a possible issue in how instructions are handled by the emulator. + +Given that the user provided details about differences in assembly-level instructions during execution and mentioned problems with atomic operations, this points towards a potential fault in instruction emulation within QEMU. + +Therefore, the appropriate category for this bug report is: + +**instruction** \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1727737 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1727737 new file mode 100644 index 000000000..1d50ceb0d --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1727737 @@ -0,0 +1,17 @@ +The issue described involves QEMU stalling when running a specific test under different versions, particularly starting from 2.8. The problem occurs during execution and relates to an instruction (`add r4, pc, r4`) where the program hangs. + +Step-by-step explanation: + +1. **Understanding the Problem**: The user reports that GCC sanitizer tests time out when run using QEMU-arm starting from version 2.8, whereas they worked with version 2.7. + +2. **Reproduction Steps**: They provided a test case and libraries to reproduce the issue, which involves running `qemu-arm` with specific options. + +3. **Debugging Information**: The `-d in_asm` option shows that the program stalls at an `add` instruction: `0x40b6eb44: e08f4004 add r4, pc, r4`. + +4. **Analyzing the Stall**: The stall suggests that QEMU is not correctly emulating this particular ARM instruction or handling it in a way that causes an infinite loop or indefinite pause. + +5. **Classification**: The issue revolves around a specific CPU instruction causing QEMU to hang, which falls under "instruction" errors in the context of QEMU's bug categorization. + +Based on this analysis, the appropriate category for the bug is: + +**instruction** \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1737 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1737 new file mode 100644 index 000000000..ee4c79b23 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1737 @@ -0,0 +1,3 @@ +The bug report describes an issue with the `ssra` instruction in QEMU when using vector lengths of 1024-bit or higher. The incorrect results for signed integers suggest that there's a problem with how the SVE2 instruction is emulated. This falls under issues related to specific instructions. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1738434 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1738434 new file mode 100644 index 000000000..368bd96de --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1738434 @@ -0,0 +1,3 @@ +The issue revolves around how QEMU handles a specific assembly instruction sequence involving a far call using `call fword ptr [esp]`. This is not related to system calls or general runtime errors but is specifically tied to the execution and emulation of instructions. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1748296 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1748296 new file mode 100644 index 000000000..ce840f810 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1748296 @@ -0,0 +1,3 @@ +The issue revolves around incorrect decoding of BMI instructions in TCG, specifically related to the `shlx` instruction, leading to an invalid opcode exception. This problem doesn't occur under KVM, indicating it's specific to QEMU's TCG implementation. + +category: instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1751422 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1751422 new file mode 100644 index 000000000..9b8a572c1 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1751422 @@ -0,0 +1 @@ +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1751494 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1751494 new file mode 100644 index 000000000..e76f51b0e --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1751494 @@ -0,0 +1,16 @@ +The correct classification for this bug report is **instruction**, as it involves an issue with the specific assembly instruction `xgetbv` that the compiler cannot recognize. The error message explicitly mentions "no such instruction" and discusses how to work around it by using the encoded form of the instruction. + +Step-by-Step Explanation: + +1. **Identify the Error**: The error message is `tcg-target.inc.c:3495:no such instruction: 'xgetbv'`. This clearly indicates that the assembler or compiler does not recognize the `xgetbv` instruction. + +2. **Understand the Context**: The problem occurs while building QEMU on Mac OS 10.6.8 using GCC 5.2.0. Another project (asmjit) faced a similar issue and resolved it by replacing the instruction name with its encoded byte sequence, which suggests that this is an assembler/compiler support issue. + +3. **Analyze Possible Categories**: + - **instruction**: Directly related to the use of a specific assembly instruction (`xgetbv`) that the compiler does not recognize. + - **syscall**: Not applicable here since the error is about an instruction, not a system call. + - **runtime**: While this could be considered a runtime issue because it affects the build process, the root cause is specifically related to the instruction. + +4. **Conclusion**: The primary issue revolves around the faulty or unrecognized assembly instruction `xgetbv`, making **instruction** the most appropriate category for this bug report. + +Final Answer: instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1756927 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1756927 new file mode 100644 index 000000000..bc80afefe --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1756927 @@ -0,0 +1,5 @@ +The issue describes a problem related to the handling of the 'bkpt' instruction within QEMU when using ARMv7 LPAE. Specifically, it points out that during a prefetch abort exception caused by a 'bkpt' instruction in user space, the IFSR register's bit [9] (which is supposed to indicate long-descriptor format usage) isn't set correctly. This affects how exceptions are processed and reported, leading to incorrect output when debugging or handling such exceptions. + +This bug is tied directly to an issue with a specific CPU instruction ('bkpt') and its interaction with the ARM architecture's exception handling mechanisms. It doesn't relate to system calls (syscall) nor general runtime errors but rather to how a particular instruction behaves under certain conditions in the emulator. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1761401 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1761401 new file mode 100644 index 000000000..88c153090 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1761401 @@ -0,0 +1,3 @@ +The issue revolves around an incorrect conversion from floating-point numbers to integers using Neon instructions in QEMU, specifically related to rounding behavior. This points to a problem with how a particular instruction is being emulated. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1771 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1771 new file mode 100644 index 000000000..c1b1dfeec --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1771 @@ -0,0 +1,5 @@ +The problem arises because QEMU's SPARC user-mode emulation does not correctly handle the CASA (Conditional Arithmetic Store on Atomic) instruction. This specific instruction is supported by certain CPUs like LEON3 but isn't being properly implemented in the emulator. The issue is tied to the lack of handling for ASI (Address Space Identifier) load/store operations, which are necessary for implementing CASA. + +**Category: instruction** + +Answer: instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1779 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1779 new file mode 100644 index 000000000..ddd79452b --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1779 @@ -0,0 +1,3 @@ +The issue involves incorrect behavior related to PowerPC AltiVec vector operations not flushing source subnormal values to zero as specified, leading to unexpected results in computations. This pertains to how instructions handle floating-point operations, specifically within the AltiVec instruction set. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1779634 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1779634 new file mode 100644 index 000000000..8b1e49ffb --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1779634 @@ -0,0 +1,7 @@ +The issue described involves running x86_64 binaries on an aarch64 platform using QEMU's user-mode emulation. The key problem is the "Synchronous External Abort" error, which typically occurs due to invalid memory accesses or incorrect instruction execution. + +This error is related to how QEMU handles instructions during emulation, particularly when translating x86_64 instructions for the aarch64 architecture. It suggests that there might be a bug in the way certain instructions are being emulated or translated. + +The category of this bug falls under "instruction" because it pertains to issues with executing or translating specific instructions, leading to an abort. + +**Answer:** instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1780 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1780 new file mode 100644 index 000000000..9b8a572c1 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1780 @@ -0,0 +1 @@ +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1781281 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1781281 new file mode 100644 index 000000000..e01667275 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1781281 @@ -0,0 +1,3 @@ +The issue involves an illegal instruction signal when using a specific PowerPC instruction (`vec_subs` instead of `vec_sub`) while testing under QEMU. This points to a problem with how instructions are handled or translated by QEMU. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1785734 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1785734 new file mode 100644 index 000000000..f17b98162 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1785734 @@ -0,0 +1,3 @@ +The bug report describes an issue involving a 16-byte write instruction (`movdqu`) that causes a partial write at a page boundary when a page fault occurs. This indicates a problem with how the instruction is handled, specifically in TCG mode within QEMU. The incorrect behavior points to a flaw in the implementation of the `movdqu` instruction itself rather than a syscall error or general runtime issue. + +**instruction** \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1790 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1790 new file mode 100644 index 000000000..0b98c4fe4 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1790 @@ -0,0 +1,3 @@ +The issue pertains to a problem with an instruction (STGP) not functioning as expected within QEMU's codebase. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1793119 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1793119 new file mode 100644 index 000000000..4aed4f63b --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1793119 @@ -0,0 +1,3 @@ +The issue described involves incorrect behavior of floating-point operations when emulating AArch64 on QEMU compared to real hardware. The problem specifically occurs with the `fdiv` instruction when FPCR is set to zero. This points to a flaw in how QEMU handles the emulation of the `fdiv` instruction, which falls under the category of an instruction-level issue. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1793608 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1793608 new file mode 100644 index 000000000..9b8a572c1 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1793608 @@ -0,0 +1 @@ +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1796520 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1796520 new file mode 100644 index 000000000..466ca4bde --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1796520 @@ -0,0 +1,3 @@ +The issue arises due to an error within the target/sh4 code when handling FPSCR.PR checks, leading to a crash during runtime. This is related to specific instructions causing undefined operations. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1806243 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1806243 new file mode 100644 index 000000000..82799a38c --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1806243 @@ -0,0 +1,3 @@ +The issue revolves around an ARM conditional branch after an if-then instruction causing QEMU to hang during debugging, specifically when using Thumb2 instructions. This points to a problem with how certain instructions are handled, particularly in the context of conditional execution and instruction translation. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1812451 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1812451 new file mode 100644 index 000000000..cf48dd3f2 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1812451 @@ -0,0 +1,3 @@ +The issue involves a path traversal vulnerability where the TFTP server's file access checks are insufficient on Windows due to differences in directory separators (backslashes instead of slashes). This allows an attacker to read arbitrary files by bypassing the intended restrictions. + +Classification: **instruction** \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1812861 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1812861 new file mode 100644 index 000000000..99c9d4172 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1812861 @@ -0,0 +1,3 @@ +The issue arises from executing an invalid address, leading to a segmentation fault. This relates to how QEMU handles instructions during emulation. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1815024 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1815024 new file mode 100644 index 000000000..9b8a572c1 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1815024 @@ -0,0 +1 @@ +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1818075 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1818075 new file mode 100644 index 000000000..b270f27ce --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1818075 @@ -0,0 +1,3 @@ +The issue arises because QEMU's TCG (Tiny Code Generator) does not support certain AVX instructions that are being used by the code built with -march=skylake and -mavx2 flags. The warnings indicate missing support for various CPU features, including AVX and AVX2, which are required to execute the AVX instructions correctly. As a result, when the program attempts to run these unsupported instructions, it hangs indefinitely. This problem is related to the execution of specific instructions that QEMU's TCG cannot handle. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1820686 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1820686 new file mode 100644 index 000000000..9b8a572c1 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1820686 @@ -0,0 +1 @@ +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1821430 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1821430 new file mode 100644 index 000000000..08c6a6a44 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1821430 @@ -0,0 +1,3 @@ +The bug report describes illegal instructions causing crashes in QEMU 4.0.0-rc0 when running ARM binaries that worked correctly in version 3.1.0. This indicates issues with instruction handling. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1821444 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1821444 new file mode 100644 index 000000000..545971a9d --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1821444 @@ -0,0 +1,7 @@ +The issue appears to be related to how QEMU's PowerPC (ppc) emulator handles floating-point arithmetic or conversions, particularly when translating between `uint32_t` and `float32`. The discrepancy in the output between running the program natively on a PowerPC system versus through QEMU suggests that there might be an error in how the FPU instructions are being emulated. Specifically, the `0x1` value is being interpreted differently, which could point to a problem with instruction emulation rather than a systemic runtime issue or a syscall error. + +The fact that the same binary produces different results when run through QEMU indicates that the emulator's handling of floating-point operations or data types isn't correctly mirroring native execution. This could involve incorrect bit-level translations or mishandling of specific FPU instructions used in the conversion from integer to float. + +Given this, the most appropriate category for the bug is: + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1821515 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1821515 new file mode 100644 index 000000000..3dec7cd37 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1821515 @@ -0,0 +1,3 @@ +The issue arises from incorrect handling of NaN values when converting from `float` to `double`, specifically within QEMU's PowerPC emulation. This is an instruction-level problem because it pertains to how specific instructions (like floating-point conversions) are emulated incorrectly. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1824778 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1824778 new file mode 100644 index 000000000..8e3978241 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1824778 @@ -0,0 +1,3 @@ +The issue is related to an instruction (tlbivax) not functioning correctly for addresses above 4G due to a truncation problem in QEMU's implementation. This falls under the "instruction" category as it involves a specific faulty instruction. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1826568 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1826568 new file mode 100644 index 000000000..01fc2705d --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1826568 @@ -0,0 +1,3 @@ +The given bug report describes an issue where the disassembler and translator disagree on decoding a specific RISC-V instruction. This indicates a problem related to instruction handling rather than system calls or general runtime issues. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1828867 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1828867 new file mode 100644 index 000000000..e538326d8 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1828867 @@ -0,0 +1,3 @@ +The issue is related to incorrect translation of specific instructions (LAHF and SAHF) when used with the REX prefix in QEMU. This falls under the category of an **instruction** bug because it involves how particular machine-level instructions are handled by the emulator. + +**Answer:** instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1832422 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1832422 new file mode 100644 index 000000000..1d0928298 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1832422 @@ -0,0 +1,25 @@ +The bug report discusses an issue related to SSE comparison operations using an 8-bit immediate value and how QEMU handles it incorrectly by throwing a SIGILL when the immediate is oversized. The problem lies within the implementation of specific instructions in QEMU, which affects how these operations are executed. + +**Step-by-Step Explanation:** + +1. **Understanding the Bug:** The report mentions that SSE CMP ops using an 8-bit immediate cause a SIGILL (illegal instruction) signal when the immediate value is too large. This indicates a problem with how the emulator processes certain instructions. + +2. **Nature of the Issue:** The issue is tied to specific CPU instructions and their encoding, not system calls or general runtime errors. It’s about how QEMU interprets and executes these particular SSE instructions. + +3. **Classification Categories:** + - **Instruction:** This category involves bugs in how specific CPU instructions are emulated. + - **Syscall:** Issues related to system calls would be classified here, but the bug isn’t about syscalls. + - **Runtime:** General runtime errors that don’t fit into the other categories. + +4. **Conclusion:** Since the problem revolves around incorrect handling of specific SSE instructions and their operands within QEMU's emulation layer, it falls under the "instruction" category. + +**Answer: instruction** + +The classification is determined by the fact that the bug pertains to how specific CPU instructions are processed in QEMU, making "instruction" the appropriate category. + +```plaintext +instruction +``` + +**Final Answer** +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1841990 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1841990 new file mode 100644 index 000000000..a54fdb948 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1841990 @@ -0,0 +1,7 @@ +The issue revolves around the `denbcdq` instruction not behaving as expected. This instruction is specific to the PowerPC architecture and is related to handling decimal floating-point numbers. The problem manifests differently when run natively versus under QEMU emulation, indicating a potential bug in how QEMU emulates this particular instruction. + +The user's analysis suggests that the issue might be tied to endianness or the way data is handled with implicit floating-point register pairs, pointing towards problems in the helper function `helper_denbcdq` within the QEMU codebase. This indicates that the problem lies within the emulation of a specific CPU instruction rather than a system call or general runtime error. + +Based on this analysis, the bug falls under the category of an instruction misbehaving. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1847467 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1847467 new file mode 100644 index 000000000..b312de776 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1847467 @@ -0,0 +1,3 @@ +The issue reported pertains to how QEMU handles segment prefixes in 64-bit mode, specifically that certain prefixes are not being ignored as they should be according to x86_64 specifications. This relates directly to the behavior and implementation of instructions within QEMU. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1858415 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1858415 new file mode 100644 index 000000000..c5e650f56 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1858415 @@ -0,0 +1,3 @@ +The bug is due to incorrect handling of buffer pointers, potentially leading to an out-of-bounds access during runtime execution. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1859713 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1859713 new file mode 100644 index 000000000..57f3fc361 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1859713 @@ -0,0 +1,7 @@ +The issue revolves around the behavior of ARM v8.3 pauth instructions (specifically `paciasp` and `autiasp`) within QEMU, where these instructions are not functioning as expected when tested on an Ubuntu 19.10 x86_64 machine using a specific version of QEMU. The problem seems to be related to how QEMU handles the computation and verification of Pointer Authentication Codes (PACs), particularly concerning truncation issues that affect the authentication process. + +The user has provided detailed test scenarios, including specific values for LR before and after corruption, as well as PAC outputs with corresponding `bot_bit` and `top_bit` results. These details suggest that there is an error in how QEMU's implementation of these instructions handles certain edge cases or truncation scenarios, leading to incorrect authentication success when it should fail. + +Given this context, the issue clearly points to a problem within the implementation of the ARM v8.3 pauth instructions themselves within QEMU. The focus is on instruction-level functionality rather than system calls or general runtime errors. + +**instruction** \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1860056 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1860056 new file mode 100644 index 000000000..abda2bb5d --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1860056 @@ -0,0 +1,7 @@ +The issue arises when running a MIPS binary compiled for big-endian 32-bit architecture using QEMU, resulting in a segmentation fault. The problem doesn't occur with 64-bit or little-endian 32-bit MIPS, which suggests it's specific to the way QEMU handles certain instructions in the big-endian 32-bit environment. + +The bug is likely due to an incorrect implementation of an instruction within QEMU that causes the program to access memory improperly, leading to a segmentation fault. This points towards a problem with how QEMU emulates specific machine instructions for this particular architecture. + +Thus, the appropriate category for this bug report would be: + +**instruction** \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1861404 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1861404 new file mode 100644 index 000000000..888859a49 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1861404 @@ -0,0 +1,3 @@ +The bug report discusses an issue with the implementation of the VMOVDQU AVX instruction for YMM registers in QEMU. The problem lies in how the `gen_ldo_env_A0` function handles data transfer, incorrectly limiting it to 16 bytes instead of 32 when using YMM registers. This is a flaw in the translation and generation of instructions within the emulator. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1863247 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1863247 new file mode 100644 index 000000000..198af3f5b --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1863247 @@ -0,0 +1,3 @@ +The bug report describes an issue with the EXT instruction specifically related to how it handles V registers on AArch64 CPUs with SVE support. The problem lies within the instruction's operation, where certain bits are not being cleared as expected. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1873898 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1873898 new file mode 100644 index 000000000..5cb69857e --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1873898 @@ -0,0 +1,3 @@ +The issue involves how QEMU's ARM Linux-user mode handles the BKPT instruction, which isn't generating the expected SIGTRAP signal. This is traced back to incorrect handling of exceptions where BKPT is treated similarly to SWI (system calls), leading to improper execution paths. + +Category: instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1874888 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1874888 new file mode 100644 index 000000000..4a33acde4 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1874888 @@ -0,0 +1,15 @@ +The issue involves certain programs causing QEMU to crash due to a "tcg fatal error" and an assertion failure related to `have_mmap_lock()`. The provided code snippet and additional examples execute custom bytecode that seems to trigger this behavior in both QEMU 4.2.0 and 5.0.0-rc4 versions when run using either the -user or -system variants. + +Analyzing the error message: +1. **tcg fatal error**: This indicates a problem within QEMU's Tiny Code Generator (TCG), which is responsible for translating guest machine code into host code. +2. **cpu_exec(CPUState *) assertion failure**: The assertion `!have_mmap_lock()` failing suggests an issue with how memory mappings or locks are handled during execution. + +The code snippets provided contain various x86-64 instructions, including some that involve SIMD operations (like `vpmovzxbd`, `vroundps`, etc.), which might be interacting incorrectly with QEMU's TCG. + +Given that the crash occurs when executing specific machine code instructions and is reproducible across different versions of QEMU, it points to a problem in how certain instructions are being handled or translated by the TCG. This suggests the issue lies within the instruction translation or execution logic rather than syscalls or general runtime errors. + +**Category: instruction** + +The bug appears to be related to faulty or incorrectly handled instructions within QEMU's TCG translator, leading to fatal errors during execution. + +**Answer:** instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1877794 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1877794 new file mode 100644 index 000000000..8a5e2d129 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1877794 @@ -0,0 +1,7 @@ +The bug report discusses an issue where a SIGILL signal is generated due to an invalid shift instruction (RLDICL) being produced by QEMU's translation process when constant folding is enabled for subtraction operations during the emulation of PPC64LE instructions on x86_64 architecture. + +**Category: instruction** + +This categorization fits because the problem arises from an invalid or incorrectly generated machine-level instruction, specifically related to a shift operation. The bug report details how the faulty instruction causes a crash and ties it directly to QEMU's handling of constant folding during translation, which is part of the instruction processing logic. + +**Answer: instruction** \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1883784 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1883784 new file mode 100644 index 000000000..ff005d5f0 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1883784 @@ -0,0 +1,3 @@ +The issue describes that the binary behaves differently on QEMU compared to actual PPC64LE hardware without any illegal instruction errors, indicating a problem in how instructions are handled by QEMU. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1885350 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1885350 new file mode 100644 index 000000000..197489ed9 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1885350 @@ -0,0 +1,5 @@ +The issue reported pertains to the RISC-V dynamic rounding mode not updating correctly when the `frm` value changes while `rm=7`. The code in QEMU's `gen_set_rm` function checks if `ctx->frm == rm` before updating, which prevents the rounding mode from changing even when `frm` is modified. This behavior contradicts the RISC-V specification, leading to incorrect rounding during floating-point operations. + +The problem occurs at runtime when executing instructions, making it a **runtime** issue. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1889288 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1889288 new file mode 100644 index 000000000..2409ffa94 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1889288 @@ -0,0 +1,10 @@ +The user's question involves a potential bug in QEMU related to the `BICS` instruction not setting flags correctly. The analysis provided points out that this is an issue with how the instruction is handled in the code, specifically within the translation logic for AArch64 instructions. + +To classify the bug: +1. **Instruction**: This category fits because the issue pertains directly to how a specific CPU instruction (`BICS`) behaves incorrectly. +2. **Syscall**: This doesn't apply since the problem isn't related to system calls. +3. **Runtime**: While runtime issues are possible, this particular case is more about incorrect instruction implementation. + +The appropriate classification is clearly "instruction". + +**Answer:** instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1892081 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1892081 new file mode 100644 index 000000000..9b8a572c1 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1892081 @@ -0,0 +1 @@ +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1895471 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1895471 new file mode 100644 index 000000000..1581aeffc --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1895471 @@ -0,0 +1,5 @@ +The issue arises from compilation errors related to C11 atomic operations in the `util/async.c` file when using clang. Specifically, the compiler complains that the address arguments for atomic operations are not pointers to `_Atomic` types, which is a requirement for C11 atomics. + +This problem is related to incorrect usage of atomic operations and thus falls under **instruction** errors because it pertains to how the code is written and compiled rather than runtime behavior or system calls. + +Instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1901 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1901 new file mode 100644 index 000000000..552b8f13e --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1901 @@ -0,0 +1,3 @@ +The issue describes incorrect behavior of the `fmul8x16` VIS instruction in QEMU's SPARC emulation compared to real hardware. This points to a problem with how the specific instruction is implemented or handled within QEMU. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1904210 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1904210 new file mode 100644 index 000000000..247d8fd33 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1904210 @@ -0,0 +1,12 @@ +The issue involves an uncaught target signal SIGILL (Illegal Instruction) while the program has registered a handler for it. This is related to how QEMU handles signals during execution, specifically when an illegal instruction occurs. + +Step-by-step explanation: +1. The binary registers a handler for SIGILL. +2. When an illegal instruction is executed at address 0x10A68, the handler should be invoked. +3. In QEMU version 2.5.0, this works as expected, and the program continues execution. +4. In QEMU version 2.11.1, instead of invoking the handler, QEMU crashes with an "uncaught target signal" error. +5. This indicates a regression or bug in how QEMU handles signals in newer versions. + +The problem is classified under **instruction** because it pertains to handling illegal instructions and signals during program execution. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1905356 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1905356 new file mode 100644 index 000000000..b30756dac --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1905356 @@ -0,0 +1,3 @@ +The bug report discusses an issue where QEMU does not properly handle unaligned data access for certain ARM32 instructions, leading to incorrect behavior that violates the ARM documentation. Specifically, it points out that instructions like LDRD and STRD should raise alignment faults when accessing unaligned addresses but do not in QEMU. This falls under issues related to instruction handling. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1907969 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1907969 new file mode 100644 index 000000000..923c18986 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1907969 @@ -0,0 +1,3 @@ +The issue arises from mixing threads and signals in a program compiled with musl's libc for i386, leading to a segfault due to problematic TCG-generated code accessing %gs. This points to an error in how QEMU handles specific instructions when emulating 32-bit x86 code. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1908 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1908 new file mode 100644 index 000000000..3c0da8343 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1908 @@ -0,0 +1,10 @@ +The bug report describes an abnormal segfault occurring in qemu-riscv64-static when running a specific test. The issue arises from a regression caused by a particular commit and results in a segmentation fault during execution. Analyzing the backtrace shows that the crash happens in code_gen_buffer, which is related to instruction generation. This indicates a problem with how instructions are being generated or handled. + +The possible categories provided are: +1. **instruction**: Involves issues with specific CPU instructions. +2. **syscall**: Relates to errors in system calls. +3. **runtime**: Pertains to general runtime errors that don't fall into the other two categories. + +Given that the issue is tied to a faulty instruction causing a segfault during code generation, it fits best under the "instruction" category. + +**Answer:** instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1909 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1909 new file mode 100644 index 000000000..1401749a2 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1909 @@ -0,0 +1,3 @@ +The issue involves a segmentation fault occurring when incrementing a gcov counter in QEMU 8.0.0 but not in version 6.2.0. The problem seems to be related to how instructions are handled, specifically the `str x8, [x9, #2512]` instruction which causes a segfault. This points to an issue with the instruction execution rather than syscalls or general runtime errors. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1912934 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1912934 new file mode 100644 index 000000000..6f8553d50 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1912934 @@ -0,0 +1,5 @@ +The bug report discusses an issue with QEMU's emulation of the `fmadds` instruction on PowerPC64LE architecture. It provides specific test results showing incorrect behavior under QEMU compared to real hardware. The analysis indicates that QEMU is not using the correct floating-point functions (`fma()` or `fmaf()`) from the host system, which are functioning properly in the host's glibc. + +Since the issue pertains directly to how QEMU emulates a specific instruction (fmadds), it falls under the category of an **instruction** bug. The problem is not related to system calls or general runtime errors but specifically to the emulation of a particular machine instruction. + +Answer: **instruction** \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1914021 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1914021 new file mode 100644 index 000000000..a6221fc00 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1914021 @@ -0,0 +1,7 @@ +The issue involves an "Illegal instruction" error when running a binary under QEMU, but not when using GDB for remote debugging. This suggests that the problem is related to how specific instructions are being executed by QEMU. Since the binary works correctly with GDB and only fails in QEMU, it points to a potential bug in QEMU's handling of certain instructions. + +The ELF file header indicates that the binary is an ARM executable, and QEMU version 4.0.0 is being used. The error occurs during runtime execution by QEMU but not under GDB. This pattern suggests that there might be an issue with how QEMU emulates or processes specific ARM instructions. + +Given these details, the problem falls under the category of **instruction** issues within QEMU. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1916269 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1916269 new file mode 100644 index 000000000..273e3e5e9 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1916269 @@ -0,0 +1,3 @@ +The issue involves an incorrect exception being raised when executing an SSE4.2 CRC32 instruction using QEMU's TCG acceleration. This points to a problem with how specific instructions are handled rather than system calls or general runtime errors. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1918026 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1918026 new file mode 100644 index 000000000..1f14fc6bf --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1918026 @@ -0,0 +1,3 @@ +The issue involves incorrect simulation of RISCV64 32-bit AMOs (Atomic Memory Operations). The problem arises from the use of `tcg_gen_atomic_fetch_<op>_tl` instead of `tcg_gen_atomic_fetch_<op>_i32`, leading to incorrect behavior in atomic operations. This directly relates to how specific instructions are implemented and handled within QEMU. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1922887 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1922887 new file mode 100644 index 000000000..52d03cde2 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1922887 @@ -0,0 +1,3 @@ +The bug report discusses an issue with how QEMU handles a specific Thumb32 STR instruction, particularly when Rn is set to 1111. This indicates a problem with instruction decoding and handling, fitting into the "instruction" category. + +(instruction) \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1925512 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1925512 new file mode 100644 index 000000000..7118d336e --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1925512 @@ -0,0 +1,3 @@ +The bug report discusses an issue with how QEMU handles a specific ARMv7 Thumb instruction (BLX imm), particularly when the H bit is set to 1, which should be undefined according to the manual but isn't properly checked in the code. + +**Answer:** instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1926759 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1926759 new file mode 100644 index 000000000..f4d87df30 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1926759 @@ -0,0 +1,3 @@ +The bug report describes an issue with the WFI instruction causing a CPU exception in QEMU, which falls under issues related to specific instructions. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1927530 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1927530 new file mode 100644 index 000000000..6d4e20522 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1927530 @@ -0,0 +1,3 @@ +The issue arises from HWAddressSanitizer detecting a SEGV signal instead of a tag mismatch when running under qemu-aarch64. This points to a problem in how memory access is being handled or reported, likely due to an incorrect implementation or handling of memory tagging in QEMU's MTE (Memory Tagging Extension) support. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1941 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1941 new file mode 100644 index 000000000..2d9fb0773 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1941 @@ -0,0 +1,3 @@ +The issue revolves around specific VSX vector instructions not functioning as expected when handling NaN values, leading to incorrect integer conversion results. This points directly to a problem with how these particular instructions are implemented in QEMU. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1955 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1955 new file mode 100644 index 000000000..e56a8f099 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/1955 @@ -0,0 +1,3 @@ +The bug report discusses an issue where the `mffsl` instruction causes a SIGILL crash when emulated under QEMU, but works correctly on actual POWER8 hardware. This points to a problem with how QEMU handles or emulates this specific instruction. + +**Answer: instruction** \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2078 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2078 new file mode 100644 index 000000000..0181b82b7 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2078 @@ -0,0 +1,10 @@ +The bug report describes a situation where QEMU crashes due to an arithmetic operation that causes a SIGFPE (signal for floating-point exception). Specifically, when certain division operations are performed on the m68k target platform, QEMU fails to handle these operations correctly and crashes. This is related to how QEMU emulates or interprets instructions on the m68k architecture. + +The key points in the bug report include: +- A minimal test program that causes the crash by performing an integer division of `INT_MIN` by `-1`. +- An alternative example using assembly code with specific move and divide instructions. +- The mention that this was discovered while porting NetBSD to QEMU's m68k "virt" platform, indicating it affects real-world use cases. + +The bug does not involve a system call (syscall) error or other runtime errors outside of instruction emulation. Instead, it is directly related to the execution and handling of specific instructions within QEMU's m68k emulation. + +**Answer:** instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2083 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2083 new file mode 100644 index 000000000..43c2f6e73 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2083 @@ -0,0 +1,3 @@ +The issue lies within an ARM instruction's functionality not behaving as expected, leading to incorrect results when executing the SMOPA (4-way) outer product instruction. This points directly to a problem with the implementation or handling of that specific instruction in QEMU. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2089 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2089 new file mode 100644 index 000000000..87ef69015 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2089 @@ -0,0 +1,3 @@ +The problem revolves around an issue with the `sqshrn` instruction, where its emulation differs between QEMU and actual hardware, leading to test failures. The failed tests indicate that the emulation does not correctly replicate the behavior expected from real AArch64 hardware for this specific instruction. + +**Category:** instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2122 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2122 new file mode 100644 index 000000000..45706f0f2 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2122 @@ -0,0 +1,18 @@ +The issue involves a segmentation fault (segfault) when running `ldconfig` within a QEMU user-static environment, specifically when using an ARM64 rootfs on an x86_64 host. This suggests that there's an error in how instructions are being handled or translated between the two architectures. + +**Step-by-step Explanation:** + +1. **QEMU User-Static Environment:** The user is running an ARM64 binary (ldconfig) on an x86_64 host using QEMU's user mode emulation. + +2. **Segfault Occurrence:** A segfault indicates that there's an attempt to access a memory location without proper permissions or the memory address being invalid. + +3. **Possible Causes:** + - **Instruction Fault:** The ARM64 instruction set might be translating incorrectly to x86_64, causing invalid opcodes or addressing modes. + - **System Call Error:** Issues with how system calls are being translated or handled could lead to incorrect memory access. + - **Runtime Environment:** Problems with the runtime environment setup (e.g., mounted rootfs, missing libraries) might cause `ldconfig` to malfunction. + +4. **Classification:** The most likely category is "instruction" because the problem relates to executing ARM64 instructions on an x86_64 host, where incorrect translation could lead to invalid memory accesses causing a segfault. + +**Answer:** + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2136 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2136 new file mode 100644 index 000000000..7b5bea057 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2136 @@ -0,0 +1,3 @@ +The bug report indicates that specific LSX instructions (LSX stands for Load/Store eXtended) are producing incorrect results when running on a LoongArch host using QEMU's user mode emulation. This points to an issue with how these particular instructions are being emulated or handled within QEMU, rather than a system call error or a general runtime issue. + +Answer: instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2175 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2175 new file mode 100644 index 000000000..2303e56c2 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2175 @@ -0,0 +1,3 @@ +The issue pertains to an error in the computation of the CF flag for the BLSI instruction within QEMU. This indicates a problem with how a specific CPU instruction is being emulated or handled by QEMU. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2203 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2203 new file mode 100644 index 000000000..9b8a572c1 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2203 @@ -0,0 +1 @@ +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2248 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2248 new file mode 100644 index 000000000..56b87fad3 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2248 @@ -0,0 +1,3 @@ +The issue appears to be related to incorrect behavior in executing specific ARM64 instructions within QEMU, leading to wrong results from the `sxtb` instruction. This points to a problem with how certain instructions are emulated or handled. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2302 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2302 new file mode 100644 index 000000000..9b8a572c1 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2302 @@ -0,0 +1 @@ +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2317 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2317 new file mode 100644 index 000000000..21d557a1e --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2317 @@ -0,0 +1,3 @@ +The issue revolves around the incorrect emulation of the `ADDV` opcode within QEMU, affecting how the instruction operates on registers and handles overflow conditions. This falls under the **instruction** category as it pertains to the emulator's handling of specific machine instructions. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2318 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2318 new file mode 100644 index 000000000..8b5eedf94 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2318 @@ -0,0 +1,3 @@ +The issue is related to how QEMU emulates the SUBV instruction, specifically regarding underflow detection not functioning correctly. This directly pertains to an emulation problem with a specific CPU instruction, so it falls under the "instruction" category. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2319 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2319 new file mode 100644 index 000000000..680172151 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2319 @@ -0,0 +1,3 @@ +The bug report describes an issue with the SDIV instruction in QEMU, specifically when handling negative divisors. This directly relates to how instructions are processed within the emulator, making it an **instruction**-related bug. + +**Answer:** instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2336 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2336 new file mode 100644 index 000000000..ab8ceac20 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2336 @@ -0,0 +1,3 @@ +The bug report describes a crash when running `qemu-x86_64` on LoongArch after a specific commit. The error message "Bus error (core dumped)" suggests an issue related to memory access or instruction execution, which points towards a problem with instructions. Therefore, the category is: + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2371 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2371 new file mode 100644 index 000000000..d075e4544 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2371 @@ -0,0 +1,3 @@ +The bug report describes an issue within QEMU's implementation of the RISC-V `froundnx.h` instruction. The problem arises from incorrect handling of NaN-boxing for half-precision floating-point numbers, leading to improper results when invalidly formatted NaN values are processed. This falls under issues related to instructions. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2372 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2372 new file mode 100644 index 000000000..79fcdd0e8 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2372 @@ -0,0 +1,3 @@ +The issue pertains to an incorrect implementation of an ARM instruction within QEMU, specifically affecting how matrix multiplication is handled for certain data types and sizes. This directly relates to how the processor's instructions are emulated. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2373 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2373 new file mode 100644 index 000000000..78cf9a1e9 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2373 @@ -0,0 +1,3 @@ +The bug report describes an issue with the FMOPA/FMOPS widening instructions in QEMU's AArch64 implementation. Specifically, it mentions that these instructions incorrectly handle floating-point conversions when the FZ and FZ16 flags are set, leading to wrong results. The problem lies within the instruction execution logic of the emulator. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2375 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2375 new file mode 100644 index 000000000..f41121e39 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2375 @@ -0,0 +1,3 @@ +The issue pertains to an incorrect implementation of the `fjcvtzs` instruction within QEMU's ARM/vfp helper functions. This misbehavior affects how the PSTATE.Z flag is set when dealing with denormalized numbers and flushing them to zero. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2376 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2376 new file mode 100644 index 000000000..0e6289a48 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2376 @@ -0,0 +1,3 @@ +The issue is directly related to an ARM instruction (VCMLA) within QEMU's implementation, where the helper functions for these instructions incorrectly handle vector register modifications due to miscalculations in element boundaries. This leads to unintended changes in unrelated registers. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2386 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2386 new file mode 100644 index 000000000..c99dc63aa --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2386 @@ -0,0 +1,3 @@ +The issue revolves around the incorrect behavior of the `SLL` instruction in QEMU when handling logical shifts, indicating a problem with how this specific RISC-V instruction is implemented or emulated. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2419 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2419 new file mode 100644 index 000000000..5b5521a7d --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2419 @@ -0,0 +1,3 @@ +The bug report describes an issue with how the `ldapr_stlr_i` instructions handle signed offsets, specifically that the immediate field (`imm`) should be treated as a signed 9-bit value (`s9`) rather than an unsigned 9-bit value. This is related to instruction decoding and handling within QEMU's ARM target emulation. + +**instruction** \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2422 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2422 new file mode 100644 index 000000000..a8ec32f9a --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2422 @@ -0,0 +1,3 @@ +The bug report discusses an issue with the `vsetvli` instruction in QEMU where the `vill` bit is not set as specified by the RISC-V V Spec when using a reserved form of the instruction. This directly relates to how the instruction behaves, making it an **instruction** category issue. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2474 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2474 new file mode 100644 index 000000000..3b18becb6 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2474 @@ -0,0 +1,3 @@ +The issue revolves around incorrect translations of the `vpgatherqq` instruction when specific registers like `xmm4` are involved. This points to a problem within the instruction translation logic itself rather than system calls or general runtime errors. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2483 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2483 new file mode 100644 index 000000000..97ce92954 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2483 @@ -0,0 +1,3 @@ +The bug report describes an issue with the `jsr (SP)` instruction in QEMU where the return address is incorrectly handled, leading to execution of garbage data. This relates directly to how an instruction is being processed, indicating a problem with the instruction implementation itself. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2487 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2487 new file mode 100644 index 000000000..b6e4300eb --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2487 @@ -0,0 +1,3 @@ +The issue arises from changes in how QEMU's TCG (Tiny Code Generator) handles certain instructions for x86_64 targets, specifically related to testing bits and partial registers. This leads to unexpected code paths being reached during execution, causing the crash. The problem is tied to instruction generation and handling within the TCG component. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2497 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2497 new file mode 100644 index 000000000..6ceedf1fa --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2497 @@ -0,0 +1,3 @@ +The issue involves an unimplemented register in QEMU's FPU, causing test failures when instructions interact with that register. + +classification: instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2498 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2498 new file mode 100644 index 000000000..253889eb8 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2498 @@ -0,0 +1,3 @@ +The bug report discusses an issue with the `fmovem` instruction in QEMU's m68k emulation, specifically regarding the incorrect order of reading/writing FPU control registers. This directly relates to how instructions are handled within the emulator. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2499 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2499 new file mode 100644 index 000000000..18455bc67 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2499 @@ -0,0 +1,3 @@ +The given bug report discusses an issue where the `fsave` and `frestore` instructions are not enabled for 68020/68030 processors in QEMU. This is related to how specific instructions are handled by the emulator, which falls under the category of **instruction** bugs. + +Answer: instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2500 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2500 new file mode 100644 index 000000000..ed8dbef86 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2500 @@ -0,0 +1,3 @@ +The bug report discusses an issue with QEMU not implementing specific MMU instructions (like `pmove`) for the 68030 processor and incorrectly generating an f-line exception instead of executing the intended operation. This directly relates to how QEMU handles these particular instructions, which are crucial for the correct functioning of the CPU's memory management unit. + +**instruction** \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2536 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2536 new file mode 100644 index 000000000..9b8a572c1 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2536 @@ -0,0 +1 @@ +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2595 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2595 new file mode 100644 index 000000000..0e5de0712 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2595 @@ -0,0 +1,3 @@ +The issue involves incorrect behavior of specific ARM SVE instructions (SDOT and UDOT) when using 64-bit elements in QEMU, which is part of the runtime environment handling these instructions. + +**instruction** \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2632 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2632 new file mode 100644 index 000000000..a08d479d7 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2632 @@ -0,0 +1,3 @@ +The issue arises due to incorrect optimization by TCG (Tiny Code Generator) that breaks memory access ordering, leading to register dependency issues and incorrect behavior in multithreaded environments. This falls under the realm of runtime errors because it affects how the program executes dynamically after compilation. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2647 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2647 new file mode 100644 index 000000000..a14d92c24 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2647 @@ -0,0 +1,3 @@ +The issue lies within the conditional judgment where `acc_flag` is checked against `PAGE_WRITE`, but based on the earlier code, `acc_flag` can only take the values `PAGE_WRITE_ORG`, `PAGE_READ`, or `PAGE_EXEC`. This means comparing it to `PAGE_WRITE` directly will never be true and likely leads to unintended behavior in memory access handling. This is an example of a faulty instruction. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/266 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/266 new file mode 100644 index 000000000..9b8a572c1 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/266 @@ -0,0 +1 @@ +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2672 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2672 new file mode 100644 index 000000000..5eced6e44 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2672 @@ -0,0 +1,13 @@ +The bug report describes an issue where a binary contains an illegal instruction following a `jal` instruction in RISC-V64 baremetal emulation. The problem arises because after executing the `jal`, the next instruction is illegal, leading to an exception. This is related to how instructions are handled during execution. + +**instruction** + +Step-by-step explanation: + +1. **Understanding the Issue**: The binary has an illegal instruction immediately after a `jal` (jump and link) instruction. Normally, the `jal` should redirect control flow, but in this case, the next instruction is being executed instead of taking the jump. + +2. **Identifying the Category**: Since the problem involves the execution of an illegal instruction and how the `jal` is handled, it falls under issues related to instruction handling. + +3. **Categorization**: The categories provided are "instruction," "syscall," and "runtime." This issue clearly pertains to instruction execution, not system calls or general runtime errors. + +**Answer:** instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2696 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2696 new file mode 100644 index 000000000..fbcf82be6 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2696 @@ -0,0 +1,3 @@ +The bug report mentions an "unreachable assertion" in `decode_insns()` when handling an invalid instruction. This indicates that there's an issue with how certain instructions are being decoded or handled by QEMU for Hexagon. Since the problem arises from processing an instruction, it falls under the category of **instruction** bugs. + +Answer: instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2730 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2730 new file mode 100644 index 000000000..8f2a8bec0 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2730 @@ -0,0 +1,3 @@ +The issue arises from executing specific assembly instructions that lead to an unexpected result, indicating a problem with how QEMU handles those instructions. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2802 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2802 new file mode 100644 index 000000000..f685ee1b5 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2802 @@ -0,0 +1,3 @@ +The bug report describes an issue with specific Sparc instructions (`fdtox` and `fqtox`) not correctly selecting destination registers when they are higher than `f31`. This indicates a problem with how these instructions are handled in QEMU's instruction decoding and execution. + +**instruction** \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2865 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2865 new file mode 100644 index 000000000..5b02ba72d --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2865 @@ -0,0 +1,3 @@ +The issue revolves around an incorrect implementation of the `xvldi` instruction within QEMU's translation code for LoongArch64 vectors. The bug specifically affects how the instruction interprets and processes its immediate value, leading to incorrect vector data being loaded. + +**Category:** instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2878 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2878 new file mode 100644 index 000000000..5492d3ac1 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2878 @@ -0,0 +1,3 @@ +The user is asking about support for AVX512 in QEMU user space emulation and wants to classify the given bug report into one of three categories: instruction, syscall, or runtime. The key here is that the issue relates to hardware instruction set emulation, specifically AVX512, which falls under faulty instructions. + +Answer: instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2971 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2971 new file mode 100644 index 000000000..b52c31ad9 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/2971 @@ -0,0 +1,3 @@ +The bug report discusses an issue with the decoding of specific instructions (`vldi` and `xvldi`) in QEMU for LoongArch64 architecture. The problem arises because the instruction decoder allows illegal immediates, leading to crashes when these invalid instructions are executed. This falls under issues related to instruction handling. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/312 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/312 new file mode 100644 index 000000000..9b8a572c1 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/312 @@ -0,0 +1 @@ +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/333 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/333 new file mode 100644 index 000000000..dd150e2ed --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/333 @@ -0,0 +1,3 @@ +The issue mentions random errors occurring on `aarch64` when executing `__aarch64_cas8_acq_rel`. This indicates a problem at the instruction level since it involves a specific CPU architecture and an atomic compare-and-swap operation, which is a low-level instruction. Therefore, this falls under the **instruction** category. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/361 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/361 new file mode 100644 index 000000000..9b8a572c1 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/361 @@ -0,0 +1 @@ +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/364 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/364 new file mode 100644 index 000000000..7ed71fdc3 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/364 @@ -0,0 +1,3 @@ +The bug report mentions an "incorrect signed comparison in ldsmax instructions" within QEMU's aarch64 implementation. This directly relates to how specific processor instructions are handled incorrectly, indicating a flaw at the instruction level rather than issues with system calls or general runtime errors. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/381 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/381 new file mode 100644 index 000000000..fc4ab3704 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/381 @@ -0,0 +1,3 @@ +The given error message indicates an issue within QEMU's ARM translation code, specifically pointing to an unreached code path in `disas_simd_two_reg_misc_fp16`. This suggests a problem related to instruction processing rather than system calls or general runtime errors. + +Answer: instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/390 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/390 new file mode 100644 index 000000000..9b8a572c1 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/390 @@ -0,0 +1 @@ +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/422 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/422 new file mode 100644 index 000000000..b60c48595 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/422 @@ -0,0 +1,16 @@ +The user provided a bug report stating "Unable to execute MIPS MSA code due to illegal instruction" and wants it classified into one of three categories: instruction, syscall, or runtime. + +First, I analyze the error message. The problem occurs when executing MIPS MSA (MIPS SIMD Architecture) instructions, which are specific to certain CPU architectures supported by QEMU. The mention of an "illegal instruction" suggests that the system encountered an opcode it doesn't recognize or isn't supposed to handle. + +Next, I consider the possible categories: + +1. **Instruction**: This category is for issues related to faulty or incorrect instructions. Since the error is about executing specific MIPS MSA instructions, this seems relevant. +2. **Syscall**: Errors in system calls are more about interactions between user space and kernel space. The given error doesn't indicate a problem with syscalls. +3. **Runtime**: This is a broader category for runtime errors not covered by the other two. While the error occurs at runtime, it's more specifically tied to an instruction issue. + +Given that the problem stems from attempting to execute specific instructions that QEMU doesn't support or handle correctly, "instruction" is the most accurate classification. +</think> + +The bug report indicates an issue with executing MIPS MSA instructions, which falls under problems with specific instructions rather than syscalls or general runtime errors. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/427 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/427 new file mode 100644 index 000000000..30f44bf6c --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/427 @@ -0,0 +1,3 @@ +The bug report mentions that QEMU incorrectly raises an exception when handling the SSE4.2 CRC32 instruction. This indicates an issue with how specific processor instructions are being emulated or handled within QEMU. Therefore, it falls under the category related to faulty or incorrect handling of instructions. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/449 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/449 new file mode 100644 index 000000000..230d45c31 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/449 @@ -0,0 +1,3 @@ +The issue arises from an assertion failure in the `get_field1` function within QEMU's s390x translation code when running vector instructions. This points to a problem with how specific machine instructions are being handled or translated by QEMU. + +category: instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/494 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/494 new file mode 100644 index 000000000..2b9f51b25 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/494 @@ -0,0 +1,3 @@ +The issue mentions "cmake crashes on qemu-alpha-user with Illegal Instruction." This indicates that an illegal or invalid instruction is being executed, which falls under the category of an incorrect or faulty CPU instruction. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/508 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/508 new file mode 100644 index 000000000..9b8a572c1 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/508 @@ -0,0 +1 @@ +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/514 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/514 new file mode 100644 index 000000000..5ea09c674 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/514 @@ -0,0 +1,3 @@ +The issue described involves incorrect behavior in QEMU when handling SP-based memory accesses with MTE enabled, leading to false positive tag check faults despite ARM specifications indicating such accesses should be Tag Unchecked. This points directly to an error in how instructions are processed. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/616 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/616 new file mode 100644 index 000000000..34c793024 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/616 @@ -0,0 +1,3 @@ +The issue revolves around incorrect handling of the overflow condition code when using specific instructions on s390x architecture, which is an instruction-level problem. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/618 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/618 new file mode 100644 index 000000000..d94436ee2 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/618 @@ -0,0 +1,8 @@ +The bug report discusses an issue where the overflow condition code is incorrectly determined after subtraction on s390x architecture when using QEMU. Specifically, it points out that QEMU does not set the overflow condition code correctly during mathematical operations, leading to incorrect results in the provided test program. + +**Category: instruction** + +This classification is appropriate because the bug pertains to how specific CPU instructions (in this case, subtraction and condition codes) are handled within the emulator. The issue lies in the emulation of the s390x architecture's instruction set, particularly how overflow conditions are managed, rather than a system call error or a general runtime problem. + +**Final Answer:** +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/625 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/625 new file mode 100644 index 000000000..eab27e46a --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/625 @@ -0,0 +1,3 @@ +The issue relates to an incorrect implementation of the floating-point power function in QEMU for HPPA, leading to wrong calculations and potential stack issues. This is classified under "instruction" because it pertains to how specific processor instructions are handled within the emulator. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/754 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/754 new file mode 100644 index 000000000..52083b2ad --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/754 @@ -0,0 +1,3 @@ +The issue involves incorrect execution of specific instructions (`trapcs` causing non-execution of subsequent instructions and an extra instruction being executed), which directly relates to how QEMU emulates the M68020 processor's instruction handling. This falls under an **instruction** emulation problem. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/799 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/799 new file mode 100644 index 000000000..878fd18bb --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/799 @@ -0,0 +1,3 @@ +The bug report describes an issue where QEMU crashes due to an unrecognized operation in the TCG optimizer when processing an SVE2 instruction. This indicates that the problem lies within how specific instructions are handled by the emulator, specifically related to instruction optimization. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/824 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/824 new file mode 100644 index 000000000..03e24945a --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/824 @@ -0,0 +1,3 @@ +The bug report describes an issue related to translation blocks generated by Qemu, specifically involving repeated and overlapping instructions. The problem occurs when translating x86_64 code, leading to incorrect or duplicated opcodes within the translated block. This directly pertains to how Qemu handles instruction translation. + +Answer: instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/826 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/826 new file mode 100644 index 000000000..db8fe4754 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/826 @@ -0,0 +1,3 @@ +The bug report describes an issue with how QEMU handles a specific SVE2 instruction (`ldnt1sb`), leading to incorrect address calculations and data aborts. The problem lies within the implementation of this particular instruction in QEMU. + +**instruction** \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/837 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/837 new file mode 100644 index 000000000..2236af1c9 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/837 @@ -0,0 +1,5 @@ +The bug report discusses an issue where executing the `icebp` instruction (opcode `F1`) results in raising `SIGILL` in QEMU instead of `SIGTRAP`, which is the correct behavior observed on bare-metal Linux. This discrepancy points to a problem with how QEMU emulates or handles the specific `icebp` instruction. + +Since the issue revolves around the emulation of an x86 instruction and its incorrect signal handling, it falls under the category related to faulty instructions. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/890 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/890 new file mode 100644 index 000000000..9b8a572c1 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/890 @@ -0,0 +1 @@ +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/904308 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/904308 new file mode 100644 index 000000000..b3db7c8f3 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/904308 @@ -0,0 +1,3 @@ +The issue in the provided code pertains to incorrect handling of the ZF (Zero Flag) for certain x86 instructions (BT/BTS/BTR/BTC) within QEMU's translation logic. The bug causes the Zero Flag to be incorrectly set, which directly relates to how these specific instructions are emulated. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/947 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/947 new file mode 100644 index 000000000..43cb12e0e --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/947 @@ -0,0 +1,3 @@ +The issue involves a segmentation fault due to incorrect handling of an address by generated code in TCG for AARCH64. The problem stems from how the upper 32 bits of the helper function's address are loaded into a register before branching, leading to an invalid memory access. This relates directly to an instruction generation flaw. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/952 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/952 new file mode 100644 index 000000000..40d02b104 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/952 @@ -0,0 +1,3 @@ +The issue revolves around the `bkpt` instruction not being correctly handled by QEMU when translating ARM guest code, leading to a SIGTRAP signal and core dump. This indicates a problem with instruction emulation. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/984 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/984 new file mode 100644 index 000000000..0924293c9 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/984 @@ -0,0 +1,3 @@ +The bug report discusses an issue with the `fldl` instruction in QEMU's i386 emulation, specifically related to how it handles floating-point operations based on FPU control words. This points directly to a problem with a specific CPU instruction. + +**instruction** \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/993 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/993 new file mode 100644 index 000000000..7c44cced8 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/993 @@ -0,0 +1,3 @@ +The bug report describes an "Invalid opcode" error specifically mentioning the `vzeroupper` instruction, which is related to an instruction-level issue rather than a syscall or general runtime error. Therefore, it falls under the "instruction" category. + +instruction \ No newline at end of file diff --git a/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/998 b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/998 new file mode 100644 index 000000000..c51622fb4 --- /dev/null +++ b/results/classifier/no-thinking-deepseek-r1:70b/reasoning/instruction/998 @@ -0,0 +1,3 @@ +The issue revolves around the incorrect setting of a specific bit (SCTLR_EL1.BT0) in user mode within QEMU, which affects how certain instructions are handled and can lead to incorrect program behavior or crashes. This relates to instruction-level behavior rather than syscalls or general runtime errors. + +instruction \ No newline at end of file |