diff options
Diffstat (limited to 'results/classifier/zero-shot/105/other/1900155')
| -rw-r--r-- | results/classifier/zero-shot/105/other/1900155 | 107 |
1 files changed, 107 insertions, 0 deletions
diff --git a/results/classifier/zero-shot/105/other/1900155 b/results/classifier/zero-shot/105/other/1900155 new file mode 100644 index 000000000..6ff057f35 --- /dev/null +++ b/results/classifier/zero-shot/105/other/1900155 @@ -0,0 +1,107 @@ +other: 0.893 +instruction: 0.852 +device: 0.845 +graphic: 0.813 +assembly: 0.812 +KVM: 0.801 +semantic: 0.793 +boot: 0.781 +socket: 0.775 +vnc: 0.771 +network: 0.755 +mistranslation: 0.743 + +MIPS Malta fails booting due to IDE error + +As of commit 3e407488349: + +$ avocado --show=console run -t machine:malta tests/acceptance/boot_linux_console.py +console: [ 0.000000] Linux version 4.5.0-2-4kc-malta (<email address hidden>) (gcc version 5.3.1 20160519 (Debian 5.3.1-20) ) #1 Debian 4.5.5-1 (2016-05-29) +console: [ 0.000000] earlycon: Early serial console at I/O port 0x3f8 (options '38400n8') +console: [ 0.000000] bootconsole [uart0] enabled +console: [ 0.000000] CPU0 revision is: 00019300 (MIPS 24Kc) +console: [ 0.000000] FPU revision is: 00739300 +console: [ 0.000000] MIPS: machine is mti,malta +[...] +console: ata2.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100 +console: ata2.00: Drive reports diagnostics failure. This may indicate a drive +console: ata2.00: fault or invalid emulation. Contact drive vendor for information. +console: ata2.00: configured for UDMA/33 +console: scsi 1:0:0:0: CD-ROM QEMU QEMU DVD-ROM 2.5+ PQ: 0 ANSI: 5 +console: Freeing unused kernel memory: 412K (80979000 - 809e0000) +console: do_page_fault(): sending SIGSEGV to mount for invalid write access to 0018a000 +console: epc = 775cca54 in libc-2.27.so[775b3000+177000] +console: ra = 77754618 in ld-2.27.so[77743000+24000] +console: do_page_fault(): sending SIGSEGV to klogd for invalid write access to 0018a000 +console: epc = 770f0a54 in libc-2.27.so[770d7000+177000] +console: ra = 77278618 in ld-2.27.so[77267000+24000] +console: do_page_fault(): sending SIGSEGV to S20urandom for invalid write access to 0018a000 +console: epc = 77d0ca54 in libc-2.27.so[77cf3000+177000] +console: ra = 77e94618 in ld-2.27.so[77e83000+24000] +console: do_page_fault(): sending SIGSEGV to mkdir for invalid write access to 0018a000 +console: epc = 776b8a54 in libc-2.27.so[7769f000+177000] +console: ra = 77840618 in ld-2.27.so[7782f000+24000] +console: do_page_fault(): sending SIGSEGV to sh for invalid write access to 0018a000 +console: epc = 77364a54 in libc-2.27.so[7734b000+177000] +console: ra = 774ec618 in ld-2.27.so[774db000+24000] +console: do_page_fault(): sending SIGSEGV to sh for invalid write access to 0018a000 +console: epc = 77bd4a54 in libc-2.27.so[77bbb000+177000] +console: ra = 77d5c618 in ld-2.27.so[77d4b000+24000] +console: do_page_fault(): sending SIGSEGV to awk for invalid write access to 0018a000 +console: epc = 76f44a54 in libc-2.27.so[76f2b000+177000] +console: ra = 770cc618 in ld-2.27.so[770bb000+24000] +console: do_page_fault(): sending SIGSEGV to cat for invalid write access to 0018a000 +console: epc = 770cca54 in libc-2.27.so[770b3000+177000] +console: ra = 77254618 in ld-2.27.so[77243000+24000] +$ echo $? +8 + +55adb3c45620c31f29978f209e2a44a08d34e2da is the first bad commit +commit 55adb3c45620c31f29978f209e2a44a08d34e2da +Author: John Snow <email address hidden> +Date: Fri Jul 24 01:23:00 2020 -0400 + + ide: cancel pending callbacks on SRST + + The SRST implementation did not keep up with the rest of IDE; it is + possible to perform a weak reset on an IDE device to remove the BSY/DRQ + bits, and then issue writes to the control/device registers which can + cause chaos with the state machine. + + Fix that by actually performing a real reset. + +Yup. Mark Cave-Ayland pointed this out to me. I have a patch ready for it: + +diff --git a/hw/ide/core.c b/hw/ide/core.c +index 693b352d5e..98cea7ad45 100644 +--- a/hw/ide/core.c ++++ b/hw/ide/core.c +@@ -2254,10 +2254,8 @@ static void ide_perform_srst(IDEState *s) + /* Cancel PIO callback, reset registers/signature, etc */ + ide_reset(s); + +- if (s->drive_kind == IDE_CD) { +- /* ATAPI drives do not set READY or SEEK */ +- s->status = 0x00; +- } ++ /* perform diagnostic */ ++ cmd_exec_dev_diagnostic(s, WIN_DIAGNOSE); + } + + static void ide_bus_perform_srst(void *opaque) +@@ -2282,9 +2280,7 @@ void ide_ctrl_write(void *opaque, uint32_t addr, uint32_t val) + + /* Device0 and Device1 each have their own control register, + * but QEMU models it as just one register in the controller. */ +- if ((bus->cmd & IDE_CTRL_RESET) && +- !(val & IDE_CTRL_RESET)) { +- /* SRST triggers on falling edge */ ++ if (!(bus->cmd & IDE_CTRL_RESET) && (val & IDE_CTRL_RESET)) { + for (i = 0; i < 2; i++) { + s = &bus->ifs[i]; + s->status |= BUSY_STAT; + +Fixed by commits 4ac4e7281a2..1a9925e3390. + +Released with QEMU v5.2.0. + |