9 files changed, 192 insertions, 0 deletions
diff --git a/results/scraper/box64/40 b/results/scraper/box64/40
new file mode 100644
index 000000000..e1dd38671
--- /dev/null
+++ b/results/scraper/box64/40
@@ -0,0 +1,64 @@
+Core dump due to missing implementations in library files
+```
+[corey@corey-pi4 Delta-Gal_Linux]$ cd /home/corey/Downloads/unsung-warriors-prologue-linux/
+[corey@corey-pi4 unsung-warriors-prologue-linux]$ ./UnsungWarriorsPrologue.x86_64
+Box64 with Dynarec v0.1.3 acc3ed8 built on Jul  8 2021 18:04:22
+Using default BOX64_LD_LIBRARY_PATH: ./:lib/:lib64/:x86_64/:bin64/:libs64/
+Using default BOX64_PATH: ./:bin/
+Counted 52 Env var
+Looking for ./UnsungWarriorsPrologue.x86_64
+Using native(wrapped) libdl.so.2
+Using native(wrapped) libpthread.so.0
+Using native(wrapped) librt.so.1
+Using emulated /lib/x86_64-linux-gnu/libstdc++.so.6
+Using native(wrapped) libm.so.6
+Using emulated /lib/x86_64-linux-gnu/libgcc_s.so.1
+Using native(wrapped) libc.so.6
+Using native(wrapped) ld-linux-x86-64.so.2
+Using native(wrapped) libX11.so.6
+Using native(wrapped) libXext.so.6
+Using native(wrapped) libxcb.so.1
+Using native(wrapped) libXau.so.6
+Using native(wrapped) libXdmcp.so.6
+Using native(wrapped) libXcursor.so.1
+Using native(wrapped) libXinerama.so.1
+Using native(wrapped) libXi.so.6
+Using native(wrapped) libXrandr.so.2
+Using native(wrapped) libXrender.so.1
+Using native(wrapped) libXss.so.1
+Using native(wrapped) libXxf86vm.so.1
+Using native(wrapped) libGL.so.1
+Using native(wrapped) libudev.so.1
+Set current directory to /home/corey/Downloads/unsung-warriors-prologue-linux
+Found path: /home/corey/Downloads/unsung-warriors-prologue-linux/UnsungWarriorsPrologue.x86_64
+Using emulated /home/corey/Downloads/unsung-warriors-prologue-linux/UnsungWarriorsPrologue_Data/Mono/x86_64/libmono.so
+Error: Global Symbol data_start not found, cannot apply R_X86_64_GLOB_DAT @0xffff89eb5790 ((nil)) in /home/corey/Downloads/unsung-warriors-prologue-linux/UnsungWarriorsPrologue_Data/Mono/x86_64/libmono.so
+Error: Global Symbol __data_start not found, cannot apply R_X86_64_GLOB_DAT @0xffff89eb5a88 ((nil)) in /home/corey/Downloads/unsung-warriors-prologue-linux/UnsungWarriorsPrologue_Data/Mono/x86_64/libmono.so
+Mono path[0] = '/home/corey/Downloads/unsung-warriors-prologue-linux/UnsungWarriorsPrologue_Data/Managed'
+Mono config path = '/home/corey/Downloads/unsung-warriors-prologue-linux/UnsungWarriorsPrologue_Data/Mono/etc'
+0x7c751040: Stack is corrupted, aborting
+==== CPU Registers ====
+RAX=be40df7a009dd72c RCX=0000ffff89aef636 RDX=0000ffff89aef7b0 RBX=0000ffffa492ed40 RSP=0000ffffa492ed18 FLAGS=--S--P-
+RBP=0000ffff89a8c8a9 RSI=0000000000000000 RDI=0000000000000000  R8=0000ffff89ebfb30  R9=0000000000021775 
+R10=0000000000021775 R11=0000000000000001 R12=0000000001d06df8 R13=0000000001d06ded R14=0000ffffa492ef40 
+R15=0000ffffa492f030 RIP=000000007c901773 
+======== Stack ========
+Stack is from FFFF89A8C8A9 to FFFFA492ED18
+Old IP: 7C751040
+Library libXrender.so.1 (0x7cadcda0) needs 0x7cae7ec0, but it was not found. Ignoring.
+Library libXext.so.6 (0x7cacec20) needs 0x7cae13f0, but it was not found. Ignoring.
+Library libXext.so.6 (0x7cacec20) needs 0x7cae7ec0, but it was not found. Ignoring.
+Library libXext.so.6 (0x7cacec20) needs 0x7cae5100, but it was not found. Ignoring.
+Library libXext.so.6 (0x7cacec20) needs 0x7cadec90, but it was not found. Ignoring.
+Library libX11.so.6 (0x7cacc0c0) needs 0x7cae13f0, but it was not found. Ignoring.
+Library libX11.so.6 (0x7cacc0c0) needs 0x7cae7ec0, but it was not found. Ignoring.
+Library libX11.so.6 (0x7cacc0c0) needs 0x7cae5100, but it was not found. Ignoring.
+Library libX11.so.6 (0x7cacc0c0) needs 0x7cadec90, but it was not found. Ignoring.
+Library libc.so.6 (0x7c8a8260) needs 0x7d37ade0, but it was not found. Ignoring.
+Library libm.so.6 (0x7c89c5b0) needs 0x7d37ade0, but it was not found. Ignoring.
+Library librt.so.1 (0x7c7d4b30) needs 0x7d37ade0, but it was not found. Ignoring.
+Library libpthread.so.0 (0x7c7d4980) needs 0x7d37ade0, but it was not found. Ignoring.
+Library libdl.so.2 (0x7c7d36a0) needs 0x7d37ade0, but it was not found. Ignoring.
+Stop waiting for remaining thread 8604
+Aborted (core dumped)
+```
\ No newline at end of file
diff --git a/results/scraper/box64/400 b/results/scraper/box64/400
new file mode 100644
index 000000000..73c620f59
--- /dev/null
+++ b/results/scraper/box64/400
@@ -0,0 +1,20 @@
+Error during make -j4 
+Hi,
+During the make -j4 command I got this issue :
+[  1%] Building C object CMakeFiles/dynarec_native.dir/src/dynarec/arm64/dynarec_arm64_functions.c.o
+[  1%] Built target WRAPPERS
+In file included from /home/math/box64/src/emu/x64emu_private.h:4,
+                 from /home/math/box64/src/dynarec/dynablock.c:10:
+/home/math/box64/src/include/regs.h:250:2: error: unknown type name ‘__uint128_t’
+  250 |  __uint128_t u128;
+      |  ^~~~~~~~~~~
+In file included from /home/math/box64/src/dynarec/dynablock.c:16:
+....
+....
+make[2]: *** [CMakeFiles/native_pass1.dir/build.make:95: CMakeFiles/native_pass1.dir/src/dynarec/arm64/dynarec_arm64_emit_tests.c.o] Error 1
+make[2]: *** [CMakeFiles/native_pass1.dir/build.make:108: CMakeFiles/native_pass1.dir/src/dynarec/arm64/dynarec_arm64_emit_math.c.o] Error 1
+make[1]: *** [CMakeFiles/Makefile2:163: CMakeFiles/native_pass1.dir/all] Error 2
+make: *** [Makefile:182: all] Error 2
+
+I ran the command on a raspberry pi4 with Raspbian GNU/Linux 11 (bullseye)
+Do you know where that come from ?
\ No newline at end of file
diff --git a/results/scraper/box64/401 b/results/scraper/box64/401
new file mode 100644
index 000000000..2de9401da
--- /dev/null
+++ b/results/scraper/box64/401
@@ -0,0 +1,35 @@
+Error when running MTA server on RISC-V via box64
+I was trying out box64 on a RISC-V SBC (a MangoPi MQ-Pro with  an Allwinner D1 CPU). After successfully running a simple "Hello, world!"-style C program compiled for x86_64, I moved to something more difficult; running [MTA server for x86_64](https://wiki.multitheftauto.com/wiki/Installing_and_Running_MTASA_Server_on_GNU_Linux#Installation_64_bit).
+This however threw some errors which stopped the execution of the server:
+
+```
+$ ./mta-server64 
+Box64 v0.1.9 742742f built on Sep  2 2022 11:43:07
+Using default BOX64_LD_LIBRARY_PATH: ./:lib/:lib64/:x86_64/:bin64/:libs64/
+Using default BOX64_PATH: ./:bin/
+Counted 23 Env var
+Looking for ./mta-server64
+Rename process to "mta-server64"
+Using native(wrapped) libdl.so.2
+Using native(wrapped) libc.so.6
+Using native(wrapped) ld-linux-x86-64.so.2
+Using native(wrapped) libpthread.so.0
+Using native(wrapped) librt.so.1
+Using emulated ./x64/core.so
+Using native(wrapped) libncursesw.so.5
+Using native(wrapped) libtinfo.so.5
+Warning: Weak Symbol _ZGTtnam not found, cannot apply R_X86_64_JUMP_SLOT @0x3fb81c0018 (0x1d030)
+Warning: Weak Symbol _ITM_RU1 not found, cannot apply R_X86_64_JUMP_SLOT @0x3fb81c0260 (0x1d4c0)
+Warning: Weak Symbol _ITM_memcpyRtWn not found, cannot apply R_X86_64_JUMP_SLOT @0x3fb81c0430 (0x1d860)
+Warning: Weak Symbol _ITM_RU8 not found, cannot apply R_X86_64_JUMP_SLOT @0x3fb81c07c8 (0x1df90)
+Warning: Weak Symbol _ITM_memcpyRnWt not found, cannot apply R_X86_64_JUMP_SLOT @0x3fb81c08a8 (0x1e150)
+Error: Symbol wprintw not found, cannot apply R_X86_64_JUMP_SLOT @0x3fb81c0950 (0x1e2a0) in ./x64/core.so
+Warning: Weak Symbol _ZGTtdlPv not found, cannot apply R_X86_64_JUMP_SLOT @0x3fb81c0a38 (0x1e470)
+Error: relocating Plt symbols in elf core.so
+Error initializing needed lib core.so
+Cannot dlopen("./x64/core.so"/0x3fb785b051, 2)
+
+ERROR: Could not load ./x64/core.so
+* Check installed data files.
+Press enter to continue...
+```
\ No newline at end of file
diff --git a/results/scraper/box64/402 b/results/scraper/box64/402
new file mode 100644
index 000000000..da3561db9
--- /dev/null
+++ b/results/scraper/box64/402
@@ -0,0 +1,13 @@
+[Test] Can't run Matlab installer "try to launch natively instead"
+Trying to launch Matlab instaler on MacBook air M1 (Asahi)
+
+Command used: box64 ./install (without box64 Matlab throws an error about missing arm installer directory)
+
+Dynarec for ARM64, with extension: ASIMD AES CRC32 PMULL ATOMICS PageSize:16384
+Box64 with Dynarec v0.1.9 a0234ee built on Aug 28 2022 14:14:32
+Using default BOX64_LD_LIBRARY_PATH: ./:lib/:lib64/:x86_64/:bin64/:libs64/
+Using default BOX64_PATH: ./:bin/
+Counted 62 Env var
+Looking for ./install
+Not an ELF file (sign=#!/b)
+Error: reading elf header of /home/<user>/Downloads/matlab_R2022a_glnxa64/install, try to launch natively instead
diff --git a/results/scraper/box64/403 b/results/scraper/box64/403
new file mode 100644
index 000000000..80d5e2373
--- /dev/null
+++ b/results/scraper/box64/403
@@ -0,0 +1,2 @@
+I can not run minecraft bedrock dedicated server on android
+I installed ubuntu on my android device with proot-distro on termux, then i compiled box64 and installed with make install, but when i start the server, it give me an error saying "Error: allocating memory for elf /root/server/bedrock_server"
\ No newline at end of file
diff --git a/results/scraper/box64/404 b/results/scraper/box64/404
new file mode 100644
index 000000000..49c3c967e
--- /dev/null
+++ b/results/scraper/box64/404
@@ -0,0 +1,23 @@
+Symbol not found (__vfwprintf_chk@GLIBC_2.4)
+When trying to run unrar using box64 I got the following error:
+```
+root@localhost:~/unrar# ./unrar-nonfree
+Dynarec for ARM64, with extension: ASIMD AES CRC32 PMULL ATOMICS PageSize:4096
+Box64 with Dynarec v0.1.9 b25aa07 built on Sep 12 2022 11:49:59
+BOX64_LD_LIBRARY_PATH: ./:lib/:lib64/
+BOX64_PATH: ./:bin/                                        
+Counted 31 Env var                                         
+Looking for ./unrar-nonfree                                
+Rename process to "unrar-nonfree"                         
+Using emulated /usr/lib/x86_64-linux-gnu/libstdc++.so.6
+Using native(wrapped) libm.so.6
+Using emulated /usr/lib/x86_64-linux-gnu/libgcc_s.so.1
+Using native(wrapped) libpthread.so.0
+Using native(wrapped) libc.so.6
+Using native(wrapped) ld-linux-x86-64.so.2
+Using native(wrapped) librt.so.1
+Error: PltResolver: Symbol __vfwprintf_chk(ver 3: __vfwprintf_chk@GLIBC_2.4) not found, cannot apply R_X86_64_JUMP_SLOT 0x645050 (0x4024d6) in /root/unrar/unrar-nonfree
+```
+It happens with and without the dynarec enabled.
+
+I know that there is a free and open source RAR package but it doesn't seem to be able to extract my archive (free RAR only supports old RAR archive versions).
\ No newline at end of file
diff --git a/results/scraper/box64/405 b/results/scraper/box64/405
new file mode 100644
index 000000000..38a81df14
--- /dev/null
+++ b/results/scraper/box64/405
@@ -0,0 +1,11 @@
+Duplicate default in USAGE.md
+https://github.com/ptitSeb/box64/blob/342241a24d4edf5a288d50c5b2bd04fef57a29d9/docs/USAGE.md#box64_dynarec_fastnan
+
+```
+#### BOX64_DYNAREC_FASTNAN
+Enable/Disable generation of -NAN
+* 0 : Generate -NAN like on x86 (Default.)
+* 1 : Don't do anything special with NAN, to go as fast as possible (default)
+```
+
+Both of these claiming to be the default seems wrong; introduced in https://github.com/ptitSeb/box64/commit/b25aa07e11029a036e0d5fc43183b41d61bf4e13
\ No newline at end of file
diff --git a/results/scraper/box64/406 b/results/scraper/box64/406
new file mode 100644
index 000000000..edbb86016
--- /dev/null
+++ b/results/scraper/box64/406
@@ -0,0 +1,22 @@
+Crusader Kings II 3.3.3 crashes with invalid opcode
+Hi,
+
+trying to run Crusader Kings II 3.3.3 from steam version fail with the following unimplemented Opcode on Raspberry Pi 4. The error happens at soon as a single player game is launched with or without DLC.
+
+Previous 32 versions (3.1.1) do work fully with box86. The current version is 64 bits only and launches with box64.
+
+The same problem happens with Europa Universalis IV 1.32, roughly 3 minutes after launching a game. As Crusader Kings II is free on steam, I thought it would be a better case.
+
+I understand this is something added lately from the developers. I just wanted to document the case, as the emulation is working on previous versions.
+
+would you need a full debug log for his issue?
+
+thanks a lot for all you work.
+
+`2813882|0x7fa4de73aa: Unimplemented Opcode (C9 48 89 02) F0 86 4B 28 48 0F BE E9 40 0F B6 ED 85 ED 74
+2814001|SIGSEGV @0x64b59c30 (???(ck2+0x64b59c30)) (x64pc=0x7fa2468bb3/libpops_api.so:"???", rsp=0x7f8425fe48, stack=0x7f84060000:0x7f84260000 own=0x7f84060000 fp=(nil)), for accessing 0x80000 (code=1/prot=0), db=(nil)((nil):(nil)/(nil):(nil)/???:clean, hash:0/0) handler=0x14f6253
+RSP-0x20:0x00000000756b1010 RSP-0x18:0x0000007f8425ff38 RSP-0x10:0x0000007fa27b3a36 RSP-0x08:0x0000000000000000
+RSP+0x00:0x0000007fa245996b RSP+0x08:0x0000000000000000 RSP+0x10:0x0000007f8425fef8 RSP+0x18:0x00000000756b1148
+Error: PltResolver: Symbol backtrace(ver 3: backtrace@GLIBC_2.2.5) not found, cannot apply R_X86_64_JUMP_SLOT 0x20517a8 (0x8e0876) in /mnt/0DF9-72DB/sources/CrusaderKingsII/game/ck2
+2814001|Double SIGSEGV (code=1, pc=0x64b59c30, addr=0x80000)!
+`
\ No newline at end of file
diff --git a/results/scraper/box64/407 b/results/scraper/box64/407
new file mode 100644
index 000000000..a76ae41f2
--- /dev/null
+++ b/results/scraper/box64/407
@@ -0,0 +1,2 @@
+Open Zoom on box64 from zoom link.
+I am using a Mediatek MT8183, with Debian 11, and KDE desktop, with a Custom kernel, version 5.19.1-stb-mt8+, when I try to open Zoom in box64 from zoom link, zoom tries to open but gives me this error: Unable to create io-slave. klauncher said: Unknown protocol 'zoommtg'.