diff options
Diffstat (limited to 'results/scraper/launchpad-without-comments/1603636')
| -rw-r--r-- | results/scraper/launchpad-without-comments/1603636 | 145 |
1 files changed, 145 insertions, 0 deletions
diff --git a/results/scraper/launchpad-without-comments/1603636 b/results/scraper/launchpad-without-comments/1603636 new file mode 100644 index 000000000..aa73bde40 --- /dev/null +++ b/results/scraper/launchpad-without-comments/1603636 @@ -0,0 +1,145 @@ +Guest has not initialized the display yet on ubuntu 16.10 PPC + +Hi +tested with all kind of configure, with all kind of machine types but i have the same issue ... +on lastest quemo 2.6 "Guest has not initialized the display yet" +note with lastest git repository the situation become worst because on i386-softmmu i have the message but qemu exit alone because looklike there is not a bios + +this is gdb of i386-softmmu + +(gdb) run +Starting program: /home/amigaone/src/qemu/i386-softmmu/qemu-system-i386 +[Thread debugging using libthread_db enabled] +Using host libthread_db library "/lib/powerpc-linux-gnu/libthread_db.so.1". +[New Thread 0xf7f78b70 (LWP 25074)] +[New Thread 0xf770bb70 (LWP 25075)] +[New Thread 0xf6dfdb70 (LWP 25076)] +[New Thread 0xf65fdb70 (LWP 25077)] +[New Thread 0xf3337b70 (LWP 25078)] +[New Thread 0xe4146b70 (LWP 25087)] +qemu-system-i386: Trying to execute code outside RAM or ROM at 0x000a0000 +This usually means one of the following happened: + +(1) You told QEMU to execute a kernel for the wrong machine type, and it crashed on startup (eg trying to run a raspberry pi kernel on a versatilepb QEMU machine) +(2) You didn't give QEMU a kernel or BIOS filename at all, and QEMU executed a ROM full of no-op instructions until it fell off the end +(3) Your guest kernel has a bug and crashed by jumping off into nowhere + +This is almost always one of the first two, so check your command line and that you are using the right type of kernel for this machine. +If you think option (3) is likely then you can try debugging your guest with the -d debug options; in particular -d guest_errors will cause the log to include a dump of the guest register state at this point. + +Execution cannot continue; stopping here. + +[Thread 0xe4146b70 (LWP 25087) exited] +[Thread 0xf65fdb70 (LWP 25077) exited] +[Thread 0xf6dfdb70 (LWP 25076) exited] +[Thread 0xf770bb70 (LWP 25075) exited] +[Thread 0xf7f78b70 (LWP 25074) exited] +[Thread 0xf7f7c000 (LWP 25070) exited] +[Inferior 1 (process 25070) exited with code 01] + + +this is my ldd +ldd ./qemu-system-i386 + linux-vdso32.so.1 => (0x00100000) + libvirglrenderer.so.0 => /usr/local/lib/libvirglrenderer.so.0 (0x0ff8a000) + libepoxy.so.0 => /usr/lib/powerpc-linux-gnu/libepoxy.so.0 (0x0fe86000) + libgbm.so.1 => /usr/local/lib/libgbm.so.1 (0x0fe55000) + libX11.so.6 => /usr/lib/powerpc-linux-gnu/libX11.so.6 (0x0fcf2000) + libz.so.1 => /lib/powerpc-linux-gnu/libz.so.1 (0x0fcb1000) + libcurl-gnutls.so.4 => /usr/lib/powerpc-linux-gnu/libcurl-gnutls.so.4 (0x0fc10000) + libssh2.so.1 => /usr/lib/powerpc-linux-gnu/libssh2.so.1 (0x0fbbf000) + libbz2.so.1.0 => /lib/powerpc-linux-gnu/libbz2.so.1.0 (0x0fb7e000) + libpixman-1.so.0 => /usr/lib/powerpc-linux-gnu/libpixman-1.so.0 (0x0fadd000) + libutil.so.1 => /lib/powerpc-linux-gnu/libutil.so.1 (0x0faac000) + libnuma.so.1 => /usr/lib/powerpc-linux-gnu/libnuma.so.1 (0x0fa79000) + libncurses.so.5 => /lib/powerpc-linux-gnu/libncurses.so.5 (0x0fa28000) + libtinfo.so.5 => /lib/powerpc-linux-gnu/libtinfo.so.5 (0x0f9d7000) + libuuid.so.1 => /lib/powerpc-linux-gnu/libuuid.so.1 (0x0f9a6000) + libpng16.so.16 => /usr/lib/powerpc-linux-gnu/libpng16.so.16 (0x0f945000) + libjpeg.so.8 => /usr/lib/powerpc-linux-gnu/libjpeg.so.8 (0x0f8d4000) + libSDL2-2.0.so.0 => /usr/local/lib/libSDL2-2.0.so.0 (0x0f77d000) + libnettle.so.6 => /usr/lib/powerpc-linux-gnu/libnettle.so.6 (0x0f71c000) + libgnutls.so.30 => /usr/lib/powerpc-linux-gnu/libgnutls.so.30 (0x0f5ca000) + libgtk-x11-2.0.so.0 => /usr/lib/powerpc-linux-gnu/libgtk-x11-2.0.so.0 (0x0f0e6000) + libgdk-x11-2.0.so.0 => /usr/lib/powerpc-linux-gnu/libgdk-x11-2.0.so.0 (0x0f005000) + libcairo.so.2 => /usr/lib/powerpc-linux-gnu/libcairo.so.2 (0x0eec3000) + libgdk_pixbuf-2.0.so.0 => /usr/lib/powerpc-linux-gnu/libgdk_pixbuf-2.0.so.0 (0x0ee72000) + libgobject-2.0.so.0 => /usr/lib/powerpc-linux-gnu/libgobject-2.0.so.0 (0x0edf1000) + libglib-2.0.so.0 => /lib/powerpc-linux-gnu/libglib-2.0.so.0 (0x0eca0000) + libsnappy.so.1 => /usr/lib/powerpc-linux-gnu/libsnappy.so.1 (0x0ec6f000) + libusb-1.0.so.0 => /lib/powerpc-linux-gnu/libusb-1.0.so.0 (0x0ec2e000) + librt.so.1 => /lib/powerpc-linux-gnu/librt.so.1 (0x0ebfd000) + libm.so.6 => /lib/powerpc-linux-gnu/libm.so.6 (0x0eb0c000) + libgcc_s.so.1 => /lib/powerpc-linux-gnu/libgcc_s.so.1 (0x0eacb000) + libpthread.so.0 => /lib/powerpc-linux-gnu/libpthread.so.0 (0x0ea88000) + libc.so.6 => /lib/powerpc-linux-gnu/libc.so.6 (0x0e8d4000) + libdrm.so.2 => /usr/lib/powerpc-linux-gnu/libdrm.so.2 (0x0e8a3000) + libdl.so.2 => /lib/powerpc-linux-gnu/libdl.so.2 (0x0e872000) + libexpat.so.1 => /lib/powerpc-linux-gnu/libexpat.so.1 (0x0e821000) + libxcb.so.1 => /usr/lib/powerpc-linux-gnu/libxcb.so.1 (0x0e7e0000) + libidn.so.11 => /lib/powerpc-linux-gnu/libidn.so.11 (0x0e77f000) + librtmp.so.1 => /usr/lib/powerpc-linux-gnu/librtmp.so.1 (0x0e73e000) + libgssapi_krb5.so.2 => /usr/lib/powerpc-linux-gnu/libgssapi_krb5.so.2 (0x0e6cd000) + liblber-2.4.so.2 => /usr/lib/powerpc-linux-gnu/liblber-2.4.so.2 (0x0e69c000) + libldap_r-2.4.so.2 => /usr/lib/powerpc-linux-gnu/libldap_r-2.4.so.2 (0x0e61a000) + libgcrypt.so.20 => /lib/powerpc-linux-gnu/libgcrypt.so.20 (0x0e527000) + /lib/ld.so.1 (0x200a9000) + libsndio.so.6.1 => /usr/lib/powerpc-linux-gnu/libsndio.so.6.1 (0x0e4f4000) + libp11-kit.so.0 => /usr/lib/powerpc-linux-gnu/libp11-kit.so.0 (0x0e473000) + libtasn1.so.6 => /usr/lib/powerpc-linux-gnu/libtasn1.so.6 (0x0e432000) + libhogweed.so.4 => /usr/lib/powerpc-linux-gnu/libhogweed.so.4 (0x0e3d1000) + libgmp.so.10 => /usr/lib/powerpc-linux-gnu/libgmp.so.10 (0x0e330000) + libgmodule-2.0.so.0 => /usr/lib/powerpc-linux-gnu/libgmodule-2.0.so.0 (0x0e2ff000) + libpangocairo-1.0.so.0 => /usr/lib/powerpc-linux-gnu/libpangocairo-1.0.so.0 (0x0e2ce000) + libXfixes.so.3 => /usr/lib/powerpc-linux-gnu/libXfixes.so.3 (0x0e29d000) + libatk-1.0.so.0 => /usr/lib/powerpc-linux-gnu/libatk-1.0.so.0 (0x0e24c000) + libgio-2.0.so.0 => /usr/lib/powerpc-linux-gnu/libgio-2.0.so.0 (0x0e05a000) + libpangoft2-1.0.so.0 => /usr/lib/powerpc-linux-gnu/libpangoft2-1.0.so.0 (0x0e019000) + libpango-1.0.so.0 => /usr/lib/powerpc-linux-gnu/libpango-1.0.so.0 (0x0dfa8000) + libfontconfig.so.1 => /usr/lib/powerpc-linux-gnu/libfontconfig.so.1 (0x0df33000) + libXrender.so.1 => /usr/lib/powerpc-linux-gnu/libXrender.so.1 (0x0df02000) + libXinerama.so.1 => /usr/lib/powerpc-linux-gnu/libXinerama.so.1 (0x0dedf000) + libXi.so.6 => /usr/lib/powerpc-linux-gnu/libXi.so.6 (0x0de9e000) + libXrandr.so.2 => /usr/lib/powerpc-linux-gnu/libXrandr.so.2 (0x0de6d000) + libXcursor.so.1 => /usr/lib/powerpc-linux-gnu/libXcursor.so.1 (0x0de42000) + libXcomposite.so.1 => /usr/lib/powerpc-linux-gnu/libXcomposite.so.1 (0x0de1f000) + libXdamage.so.1 => /usr/lib/powerpc-linux-gnu/libXdamage.so.1 (0x0ddfc000) + libXext.so.6 => /usr/lib/powerpc-linux-gnu/libXext.so.6 (0x0ddc8000) + libfreetype.so.6 => /usr/lib/powerpc-linux-gnu/libfreetype.so.6 (0x0dcf7000) + libxcb-shm.so.0 => /usr/lib/powerpc-linux-gnu/libxcb-shm.so.0 (0x0dcc6000) + libxcb-render.so.0 => /usr/lib/powerpc-linux-gnu/libxcb-render.so.0 (0x0dc95000) + libffi.so.6 => /usr/lib/powerpc-linux-gnu/libffi.so.6 (0x0dc64000) + libpcre.so.3 => /lib/powerpc-linux-gnu/libpcre.so.3 (0x0dbd3000) + libstdc++.so.6 => /usr/lib/powerpc-linux-gnu/libstdc++.so.6 (0x0d9df000) + libudev.so.1 => /lib/powerpc-linux-gnu/libudev.so.1 (0x0d99d000) + libXau.so.6 => /usr/lib/powerpc-linux-gnu/libXau.so.6 (0x0d979000) + libXdmcp.so.6 => /usr/lib/powerpc-linux-gnu/libXdmcp.so.6 (0x0d948000) + libkrb5.so.3 => /usr/lib/powerpc-linux-gnu/libkrb5.so.3 (0x0d857000) + libk5crypto.so.3 => /usr/lib/powerpc-linux-gnu/libk5crypto.so.3 (0x0d806000) + libcom_err.so.2 => /lib/powerpc-linux-gnu/libcom_err.so.2 (0x0d7d5000) + libkrb5support.so.0 => /usr/lib/powerpc-linux-gnu/libkrb5support.so.0 (0x0d7a4000) + libresolv.so.2 => /lib/powerpc-linux-gnu/libresolv.so.2 (0x0d761000) + libsasl2.so.2 => /usr/lib/powerpc-linux-gnu/libsasl2.so.2 (0x0d720000) + libgssapi.so.3 => /usr/lib/powerpc-linux-gnu/libgssapi.so.3 (0x0d6be000) + libgpg-error.so.0 => /lib/powerpc-linux-gnu/libgpg-error.so.0 (0x0d67d000) + libasound.so.2 => /usr/lib/powerpc-linux-gnu/libasound.so.2 (0x0d54c000) + libbsd.so.0 => /lib/powerpc-linux-gnu/libbsd.so.0 (0x0d50b000) + libselinux.so.1 => /lib/powerpc-linux-gnu/libselinux.so.1 (0x0d4b9000) + libharfbuzz.so.0 => /usr/lib/powerpc-linux-gnu/libharfbuzz.so.0 (0x0d408000) + libthai.so.0 => /usr/lib/powerpc-linux-gnu/libthai.so.0 (0x0d3d7000) + libkeyutils.so.1 => /lib/powerpc-linux-gnu/libkeyutils.so.1 (0x0d3a6000) + libheimntlm.so.0 => /usr/lib/powerpc-linux-gnu/libheimntlm.so.0 (0x0d375000) + libkrb5.so.26 => /usr/lib/powerpc-linux-gnu/libkrb5.so.26 (0x0d2c3000) + libasn1.so.8 => /usr/lib/powerpc-linux-gnu/libasn1.so.8 (0x0d201000) + libhcrypto.so.4 => /usr/lib/powerpc-linux-gnu/libhcrypto.so.4 (0x0d19f000) + libroken.so.18 => /usr/lib/powerpc-linux-gnu/libroken.so.18 (0x0d15e000) + libgraphite2.so.3 => /usr/lib/powerpc-linux-gnu/libgraphite2.so.3 (0x0d10d000) + libdatrie.so.1 => /usr/lib/powerpc-linux-gnu/libdatrie.so.1 (0x0d0dc000) + libwind.so.0 => /usr/lib/powerpc-linux-gnu/libwind.so.0 (0x0d08b000) + libheimbase.so.1 => /usr/lib/powerpc-linux-gnu/libheimbase.so.1 (0x0d05a000) + libhx509.so.5 => /usr/lib/powerpc-linux-gnu/libhx509.so.5 (0x0cfe8000) + libsqlite3.so.0 => /usr/lib/powerpc-linux-gnu/libsqlite3.so.0 (0x0ceb6000) + libcrypt.so.1 => /lib/powerpc-linux-gnu/libcrypt.so.1 (0x0ce5e000) + + +Thanks \ No newline at end of file |