add 17th version of the classifier, including results

1 files changed, 1206 insertions, 0 deletions

diff --git a/results/classifier/016/virtual/70416488 b/results/classifier/016/virtual/70416488
new file mode 100644
index 00000000..8e21bd76
--- /dev/null
+++ b/results/classifier/016/virtual/70416488
@@ -0,0 +1,1206 @@
+virtual: 0.872
+debug: 0.857
+boot: 0.817
+kernel: 0.804
+hypervisor: 0.767
+arm: 0.323
+KVM: 0.289
+operating system: 0.251
+TCG: 0.103
+VMM: 0.064
+device: 0.047
+PID: 0.037
+register: 0.032
+files: 0.027
+assembly: 0.017
+semantic: 0.016
+socket: 0.015
+peripherals: 0.013
+user-level: 0.009
+performance: 0.009
+vnc: 0.007
+architecture: 0.006
+risc-v: 0.004
+network: 0.003
+alpha: 0.003
+permissions: 0.002
+graphic: 0.002
+ppc: 0.002
+x86: 0.000
+mistranslation: 0.000
+i386: 0.000
+
+[Bug Report] smmuv3 event 0x10 report when running virtio-blk-pci
+
+Hi All,
+
+When I tested mainline qemu(commit 7b87a25f49), it reports smmuv3 event 0x10
+during kernel booting up.
+
+qemu command which I use is as below:
+
+qemu-system-aarch64 -machine virt,kernel_irqchip=on,gic-version=3,iommu=smmuv3 \
+-kernel Image -initrd minifs.cpio.gz \
+-enable-kvm -net none -nographic -m 3G -smp 6 -cpu host \
+-append 'rdinit=init console=ttyAMA0 ealycon=pl0ll,0x90000000 maxcpus=3' \
+-device 
+pcie-root-port,port=0x8,chassis=0,id=pci.0,bus=pcie.0,multifunction=on,addr=0x2 
+\
+-device pcie-root-port,port=0x9,chassis=1,id=pci.1,bus=pcie.0,addr=0x2.0x1 \
+-device 
+virtio-blk-pci,drive=drive0,id=virtblk0,num-queues=8,packed=on,bus=pci.1 \
+-drive file=/home/boot.img,if=none,id=drive0,format=raw
+
+smmuv3 event 0x10 log:
+[...]
+[    1.962656] virtio-pci 0000:02:00.0: Adding to iommu group 0
+[    1.963150] virtio-pci 0000:02:00.0: enabling device (0000 -> 0002)
+[    1.964707] virtio_blk virtio0: 6/0/0 default/read/poll queues
+[    1.965759] virtio_blk virtio0: [vda] 2097152 512-byte logical blocks (1.07 
+GB/1.00 GiB)
+[    1.966934] arm-smmu-v3 9050000.smmuv3: event 0x10 received:
+[    1.967442] input: gpio-keys as /devices/platform/gpio-keys/input/input0
+[    1.967478] arm-smmu-v3 9050000.smmuv3:      0x0000020000000010
+[    1.968381] clk: Disabling unused clocks
+[    1.968677] arm-smmu-v3 9050000.smmuv3:      0x0000020000000000
+[    1.968990] PM: genpd: Disabling unused power domains
+[    1.969424] arm-smmu-v3 9050000.smmuv3:      0x0000000000000000
+[    1.969814] ALSA device list:
+[    1.970240] arm-smmu-v3 9050000.smmuv3:      0x0000000000000000
+[    1.970471]   No soundcards found.
+[    1.970902] arm-smmu-v3 9050000.smmuv3: event 0x10 received:
+[    1.971600] arm-smmu-v3 9050000.smmuv3:      0x0000020000000010
+[    1.971601] arm-smmu-v3 9050000.smmuv3:      0x0000020000000000
+[    1.971601] arm-smmu-v3 9050000.smmuv3:      0x0000000000000000
+[    1.971602] arm-smmu-v3 9050000.smmuv3:      0x0000000000000000
+[    1.971606] arm-smmu-v3 9050000.smmuv3: event 0x10 received:
+[    1.971607] arm-smmu-v3 9050000.smmuv3:      0x0000020000000010
+[    1.974202] arm-smmu-v3 9050000.smmuv3:      0x0000020000000000
+[    1.974634] arm-smmu-v3 9050000.smmuv3:      0x0000000000000000
+[    1.975005] Freeing unused kernel memory: 10112K
+[    1.975062] arm-smmu-v3 9050000.smmuv3:      0x0000000000000000
+[    1.975442] Run init as init process
+
+Another information is that if "maxcpus=3" is removed from the kernel command 
+line,
+it will be OK.
+
+I am not sure if there is a bug about vsmmu. It will be very appreciated if 
+anyone
+know this issue or can take a look at it.
+
+Thanks,
+Zhou
+
+On Mon, 9 Sept 2024 at 15:22, Zhou Wang via <qemu-devel@nongnu.org> wrote:
+>
+>
+Hi All,
+>
+>
+When I tested mainline qemu(commit 7b87a25f49), it reports smmuv3 event 0x10
+>
+during kernel booting up.
+Does it still do this if you either:
+ (1) use the v9.1.0 release (commit fd1952d814da)
+ (2) use "-machine virt-9.1" instead of "-machine virt"
+
+?
+
+My suspicion is that this will have started happening now that
+we expose an SMMU with two-stage translation support to the guest
+in the "virt" machine type (which we do not if you either
+use virt-9.1 or in the v9.1.0 release).
+
+I've cc'd Eric (smmuv3 maintainer) and Mostafa (author of
+the two-stage support).
+
+>
+qemu command which I use is as below:
+>
+>
+qemu-system-aarch64 -machine
+>
+virt,kernel_irqchip=on,gic-version=3,iommu=smmuv3 \
+>
+-kernel Image -initrd minifs.cpio.gz \
+>
+-enable-kvm -net none -nographic -m 3G -smp 6 -cpu host \
+>
+-append 'rdinit=init console=ttyAMA0 ealycon=pl0ll,0x90000000 maxcpus=3' \
+>
+-device
+>
+pcie-root-port,port=0x8,chassis=0,id=pci.0,bus=pcie.0,multifunction=on,addr=0x2
+>
+\
+>
+-device pcie-root-port,port=0x9,chassis=1,id=pci.1,bus=pcie.0,addr=0x2.0x1 \
+>
+-device
+>
+virtio-blk-pci,drive=drive0,id=virtblk0,num-queues=8,packed=on,bus=pci.1 \
+>
+-drive file=/home/boot.img,if=none,id=drive0,format=raw
+>
+>
+smmuv3 event 0x10 log:
+>
+[...]
+>
+[    1.962656] virtio-pci 0000:02:00.0: Adding to iommu group 0
+>
+[    1.963150] virtio-pci 0000:02:00.0: enabling device (0000 -> 0002)
+>
+[    1.964707] virtio_blk virtio0: 6/0/0 default/read/poll queues
+>
+[    1.965759] virtio_blk virtio0: [vda] 2097152 512-byte logical blocks
+>
+(1.07 GB/1.00 GiB)
+>
+[    1.966934] arm-smmu-v3 9050000.smmuv3: event 0x10 received:
+>
+[    1.967442] input: gpio-keys as /devices/platform/gpio-keys/input/input0
+>
+[    1.967478] arm-smmu-v3 9050000.smmuv3:      0x0000020000000010
+>
+[    1.968381] clk: Disabling unused clocks
+>
+[    1.968677] arm-smmu-v3 9050000.smmuv3:      0x0000020000000000
+>
+[    1.968990] PM: genpd: Disabling unused power domains
+>
+[    1.969424] arm-smmu-v3 9050000.smmuv3:      0x0000000000000000
+>
+[    1.969814] ALSA device list:
+>
+[    1.970240] arm-smmu-v3 9050000.smmuv3:      0x0000000000000000
+>
+[    1.970471]   No soundcards found.
+>
+[    1.970902] arm-smmu-v3 9050000.smmuv3: event 0x10 received:
+>
+[    1.971600] arm-smmu-v3 9050000.smmuv3:      0x0000020000000010
+>
+[    1.971601] arm-smmu-v3 9050000.smmuv3:      0x0000020000000000
+>
+[    1.971601] arm-smmu-v3 9050000.smmuv3:      0x0000000000000000
+>
+[    1.971602] arm-smmu-v3 9050000.smmuv3:      0x0000000000000000
+>
+[    1.971606] arm-smmu-v3 9050000.smmuv3: event 0x10 received:
+>
+[    1.971607] arm-smmu-v3 9050000.smmuv3:      0x0000020000000010
+>
+[    1.974202] arm-smmu-v3 9050000.smmuv3:      0x0000020000000000
+>
+[    1.974634] arm-smmu-v3 9050000.smmuv3:      0x0000000000000000
+>
+[    1.975005] Freeing unused kernel memory: 10112K
+>
+[    1.975062] arm-smmu-v3 9050000.smmuv3:      0x0000000000000000
+>
+[    1.975442] Run init as init process
+>
+>
+Another information is that if "maxcpus=3" is removed from the kernel command
+>
+line,
+>
+it will be OK.
+>
+>
+I am not sure if there is a bug about vsmmu. It will be very appreciated if
+>
+anyone
+>
+know this issue or can take a look at it.
+thanks
+-- PMM
+
+On 2024/9/9 22:31, Peter Maydell wrote:
+>
+On Mon, 9 Sept 2024 at 15:22, Zhou Wang via <qemu-devel@nongnu.org> wrote:
+>
+>
+>
+> Hi All,
+>
+>
+>
+> When I tested mainline qemu(commit 7b87a25f49), it reports smmuv3 event 0x10
+>
+> during kernel booting up.
+>
+>
+Does it still do this if you either:
+>
+(1) use the v9.1.0 release (commit fd1952d814da)
+>
+(2) use "-machine virt-9.1" instead of "-machine virt"
+I tested above two cases, the problem is still there.
+
+>
+>
+?
+>
+>
+My suspicion is that this will have started happening now that
+>
+we expose an SMMU with two-stage translation support to the guest
+>
+in the "virt" machine type (which we do not if you either
+>
+use virt-9.1 or in the v9.1.0 release).
+>
+>
+I've cc'd Eric (smmuv3 maintainer) and Mostafa (author of
+>
+the two-stage support).
+>
+>
+> qemu command which I use is as below:
+>
+>
+>
+> qemu-system-aarch64 -machine
+>
+> virt,kernel_irqchip=on,gic-version=3,iommu=smmuv3 \
+>
+> -kernel Image -initrd minifs.cpio.gz \
+>
+> -enable-kvm -net none -nographic -m 3G -smp 6 -cpu host \
+>
+> -append 'rdinit=init console=ttyAMA0 ealycon=pl0ll,0x90000000 maxcpus=3' \
+>
+> -device
+>
+> pcie-root-port,port=0x8,chassis=0,id=pci.0,bus=pcie.0,multifunction=on,addr=0x2
+>
+>  \
+>
+> -device pcie-root-port,port=0x9,chassis=1,id=pci.1,bus=pcie.0,addr=0x2.0x1 \
+>
+> -device
+>
+> virtio-blk-pci,drive=drive0,id=virtblk0,num-queues=8,packed=on,bus=pci.1 \
+>
+> -drive file=/home/boot.img,if=none,id=drive0,format=raw
+>
+>
+>
+> smmuv3 event 0x10 log:
+>
+> [...]
+>
+> [    1.962656] virtio-pci 0000:02:00.0: Adding to iommu group 0
+>
+> [    1.963150] virtio-pci 0000:02:00.0: enabling device (0000 -> 0002)
+>
+> [    1.964707] virtio_blk virtio0: 6/0/0 default/read/poll queues
+>
+> [    1.965759] virtio_blk virtio0: [vda] 2097152 512-byte logical blocks
+>
+> (1.07 GB/1.00 GiB)
+>
+> [    1.966934] arm-smmu-v3 9050000.smmuv3: event 0x10 received:
+>
+> [    1.967442] input: gpio-keys as /devices/platform/gpio-keys/input/input0
+>
+> [    1.967478] arm-smmu-v3 9050000.smmuv3:      0x0000020000000010
+>
+> [    1.968381] clk: Disabling unused clocks
+>
+> [    1.968677] arm-smmu-v3 9050000.smmuv3:      0x0000020000000000
+>
+> [    1.968990] PM: genpd: Disabling unused power domains
+>
+> [    1.969424] arm-smmu-v3 9050000.smmuv3:      0x0000000000000000
+>
+> [    1.969814] ALSA device list:
+>
+> [    1.970240] arm-smmu-v3 9050000.smmuv3:      0x0000000000000000
+>
+> [    1.970471]   No soundcards found.
+>
+> [    1.970902] arm-smmu-v3 9050000.smmuv3: event 0x10 received:
+>
+> [    1.971600] arm-smmu-v3 9050000.smmuv3:      0x0000020000000010
+>
+> [    1.971601] arm-smmu-v3 9050000.smmuv3:      0x0000020000000000
+>
+> [    1.971601] arm-smmu-v3 9050000.smmuv3:      0x0000000000000000
+>
+> [    1.971602] arm-smmu-v3 9050000.smmuv3:      0x0000000000000000
+>
+> [    1.971606] arm-smmu-v3 9050000.smmuv3: event 0x10 received:
+>
+> [    1.971607] arm-smmu-v3 9050000.smmuv3:      0x0000020000000010
+>
+> [    1.974202] arm-smmu-v3 9050000.smmuv3:      0x0000020000000000
+>
+> [    1.974634] arm-smmu-v3 9050000.smmuv3:      0x0000000000000000
+>
+> [    1.975005] Freeing unused kernel memory: 10112K
+>
+> [    1.975062] arm-smmu-v3 9050000.smmuv3:      0x0000000000000000
+>
+> [    1.975442] Run init as init process
+>
+>
+>
+> Another information is that if "maxcpus=3" is removed from the kernel
+>
+> command line,
+>
+> it will be OK.
+>
+>
+>
+> I am not sure if there is a bug about vsmmu. It will be very appreciated if
+>
+> anyone
+>
+> know this issue or can take a look at it.
+>
+>
+thanks
+>
+-- PMM
+>
+.
+
+Hi Zhou,
+On 9/10/24 03:24, Zhou Wang via wrote:
+>
+On 2024/9/9 22:31, Peter Maydell wrote:
+>
+> On Mon, 9 Sept 2024 at 15:22, Zhou Wang via <qemu-devel@nongnu.org> wrote:
+>
+>> Hi All,
+>
+>>
+>
+>> When I tested mainline qemu(commit 7b87a25f49), it reports smmuv3 event 0x10
+>
+>> during kernel booting up.
+>
+> Does it still do this if you either:
+>
+>  (1) use the v9.1.0 release (commit fd1952d814da)
+>
+>  (2) use "-machine virt-9.1" instead of "-machine virt"
+>
+I tested above two cases, the problem is still there.
+Thank you for reporting. I am able to reproduce and effectively the
+maxcpus kernel option is triggering the issue. It works without. I will
+come back to you asap.
+
+Eric
+>
+>
+> ?
+>
+>
+>
+> My suspicion is that this will have started happening now that
+>
+> we expose an SMMU with two-stage translation support to the guest
+>
+> in the "virt" machine type (which we do not if you either
+>
+> use virt-9.1 or in the v9.1.0 release).
+>
+>
+>
+> I've cc'd Eric (smmuv3 maintainer) and Mostafa (author of
+>
+> the two-stage support).
+>
+>
+>
+>> qemu command which I use is as below:
+>
+>>
+>
+>> qemu-system-aarch64 -machine
+>
+>> virt,kernel_irqchip=on,gic-version=3,iommu=smmuv3 \
+>
+>> -kernel Image -initrd minifs.cpio.gz \
+>
+>> -enable-kvm -net none -nographic -m 3G -smp 6 -cpu host \
+>
+>> -append 'rdinit=init console=ttyAMA0 ealycon=pl0ll,0x90000000 maxcpus=3' \
+>
+>> -device
+>
+>> pcie-root-port,port=0x8,chassis=0,id=pci.0,bus=pcie.0,multifunction=on,addr=0x2
+>
+>>  \
+>
+>> -device pcie-root-port,port=0x9,chassis=1,id=pci.1,bus=pcie.0,addr=0x2.0x1 \
+>
+>> -device
+>
+>> virtio-blk-pci,drive=drive0,id=virtblk0,num-queues=8,packed=on,bus=pci.1 \
+>
+>> -drive file=/home/boot.img,if=none,id=drive0,format=raw
+>
+>>
+>
+>> smmuv3 event 0x10 log:
+>
+>> [...]
+>
+>> [    1.962656] virtio-pci 0000:02:00.0: Adding to iommu group 0
+>
+>> [    1.963150] virtio-pci 0000:02:00.0: enabling device (0000 -> 0002)
+>
+>> [    1.964707] virtio_blk virtio0: 6/0/0 default/read/poll queues
+>
+>> [    1.965759] virtio_blk virtio0: [vda] 2097152 512-byte logical blocks
+>
+>> (1.07 GB/1.00 GiB)
+>
+>> [    1.966934] arm-smmu-v3 9050000.smmuv3: event 0x10 received:
+>
+>> [    1.967442] input: gpio-keys as /devices/platform/gpio-keys/input/input0
+>
+>> [    1.967478] arm-smmu-v3 9050000.smmuv3:      0x0000020000000010
+>
+>> [    1.968381] clk: Disabling unused clocks
+>
+>> [    1.968677] arm-smmu-v3 9050000.smmuv3:      0x0000020000000000
+>
+>> [    1.968990] PM: genpd: Disabling unused power domains
+>
+>> [    1.969424] arm-smmu-v3 9050000.smmuv3:      0x0000000000000000
+>
+>> [    1.969814] ALSA device list:
+>
+>> [    1.970240] arm-smmu-v3 9050000.smmuv3:      0x0000000000000000
+>
+>> [    1.970471]   No soundcards found.
+>
+>> [    1.970902] arm-smmu-v3 9050000.smmuv3: event 0x10 received:
+>
+>> [    1.971600] arm-smmu-v3 9050000.smmuv3:      0x0000020000000010
+>
+>> [    1.971601] arm-smmu-v3 9050000.smmuv3:      0x0000020000000000
+>
+>> [    1.971601] arm-smmu-v3 9050000.smmuv3:      0x0000000000000000
+>
+>> [    1.971602] arm-smmu-v3 9050000.smmuv3:      0x0000000000000000
+>
+>> [    1.971606] arm-smmu-v3 9050000.smmuv3: event 0x10 received:
+>
+>> [    1.971607] arm-smmu-v3 9050000.smmuv3:      0x0000020000000010
+>
+>> [    1.974202] arm-smmu-v3 9050000.smmuv3:      0x0000020000000000
+>
+>> [    1.974634] arm-smmu-v3 9050000.smmuv3:      0x0000000000000000
+>
+>> [    1.975005] Freeing unused kernel memory: 10112K
+>
+>> [    1.975062] arm-smmu-v3 9050000.smmuv3:      0x0000000000000000
+>
+>> [    1.975442] Run init as init process
+>
+>>
+>
+>> Another information is that if "maxcpus=3" is removed from the kernel
+>
+>> command line,
+>
+>> it will be OK.
+>
+>>
+>
+>> I am not sure if there is a bug about vsmmu. It will be very appreciated if
+>
+>> anyone
+>
+>> know this issue or can take a look at it.
+>
+> thanks
+>
+> -- PMM
+>
+> .
+
+Hi,
+
+On 9/10/24 03:24, Zhou Wang via wrote:
+>
+On 2024/9/9 22:31, Peter Maydell wrote:
+>
+> On Mon, 9 Sept 2024 at 15:22, Zhou Wang via <qemu-devel@nongnu.org> wrote:
+>
+>> Hi All,
+>
+>>
+>
+>> When I tested mainline qemu(commit 7b87a25f49), it reports smmuv3 event 0x10
+>
+>> during kernel booting up.
+>
+> Does it still do this if you either:
+>
+>  (1) use the v9.1.0 release (commit fd1952d814da)
+>
+>  (2) use "-machine virt-9.1" instead of "-machine virt"
+>
+I tested above two cases, the problem is still there.
+I have not much progressed yet but I see it comes with
+qemu traces.
+
+smmuv3-iommu-memory-region-0-0 translation failed for iova=0x0
+(SMMU_EVT_F_TRANSLATION)
+../..
+qemu-system-aarch64: virtio-blk failed to set guest notifier (-22),
+ensure -accel kvm is set.
+qemu-system-aarch64: virtio_bus_start_ioeventfd: failed. Fallback to
+userspace (slower).
+
+the PCIe Host bridge seems to cause that translation failure at iova=0
+
+Also virtio-iommu has the same issue:
+qemu-system-aarch64: virtio_iommu_translate no mapping for 0x0 for sid=1024
+qemu-system-aarch64: virtio-blk failed to set guest notifier (-22),
+ensure -accel kvm is set.
+qemu-system-aarch64: virtio_bus_start_ioeventfd: failed. Fallback to
+userspace (slower).
+
+Only happens with maxcpus=3. Note the virtio-blk-pci is not protected by
+the vIOMMU in your case.
+
+Thanks
+
+Eric
+
+>
+>
+> ?
+>
+>
+>
+> My suspicion is that this will have started happening now that
+>
+> we expose an SMMU with two-stage translation support to the guest
+>
+> in the "virt" machine type (which we do not if you either
+>
+> use virt-9.1 or in the v9.1.0 release).
+>
+>
+>
+> I've cc'd Eric (smmuv3 maintainer) and Mostafa (author of
+>
+> the two-stage support).
+>
+>
+>
+>> qemu command which I use is as below:
+>
+>>
+>
+>> qemu-system-aarch64 -machine
+>
+>> virt,kernel_irqchip=on,gic-version=3,iommu=smmuv3 \
+>
+>> -kernel Image -initrd minifs.cpio.gz \
+>
+>> -enable-kvm -net none -nographic -m 3G -smp 6 -cpu host \
+>
+>> -append 'rdinit=init console=ttyAMA0 ealycon=pl0ll,0x90000000 maxcpus=3' \
+>
+>> -device
+>
+>> pcie-root-port,port=0x8,chassis=0,id=pci.0,bus=pcie.0,multifunction=on,addr=0x2
+>
+>>  \
+>
+>> -device pcie-root-port,port=0x9,chassis=1,id=pci.1,bus=pcie.0,addr=0x2.0x1 \
+>
+>> -device
+>
+>> virtio-blk-pci,drive=drive0,id=virtblk0,num-queues=8,packed=on,bus=pci.1 \
+>
+>> -drive file=/home/boot.img,if=none,id=drive0,format=raw
+>
+>>
+>
+>> smmuv3 event 0x10 log:
+>
+>> [...]
+>
+>> [    1.962656] virtio-pci 0000:02:00.0: Adding to iommu group 0
+>
+>> [    1.963150] virtio-pci 0000:02:00.0: enabling device (0000 -> 0002)
+>
+>> [    1.964707] virtio_blk virtio0: 6/0/0 default/read/poll queues
+>
+>> [    1.965759] virtio_blk virtio0: [vda] 2097152 512-byte logical blocks
+>
+>> (1.07 GB/1.00 GiB)
+>
+>> [    1.966934] arm-smmu-v3 9050000.smmuv3: event 0x10 received:
+>
+>> [    1.967442] input: gpio-keys as /devices/platform/gpio-keys/input/input0
+>
+>> [    1.967478] arm-smmu-v3 9050000.smmuv3:      0x0000020000000010
+>
+>> [    1.968381] clk: Disabling unused clocks
+>
+>> [    1.968677] arm-smmu-v3 9050000.smmuv3:      0x0000020000000000
+>
+>> [    1.968990] PM: genpd: Disabling unused power domains
+>
+>> [    1.969424] arm-smmu-v3 9050000.smmuv3:      0x0000000000000000
+>
+>> [    1.969814] ALSA device list:
+>
+>> [    1.970240] arm-smmu-v3 9050000.smmuv3:      0x0000000000000000
+>
+>> [    1.970471]   No soundcards found.
+>
+>> [    1.970902] arm-smmu-v3 9050000.smmuv3: event 0x10 received:
+>
+>> [    1.971600] arm-smmu-v3 9050000.smmuv3:      0x0000020000000010
+>
+>> [    1.971601] arm-smmu-v3 9050000.smmuv3:      0x0000020000000000
+>
+>> [    1.971601] arm-smmu-v3 9050000.smmuv3:      0x0000000000000000
+>
+>> [    1.971602] arm-smmu-v3 9050000.smmuv3:      0x0000000000000000
+>
+>> [    1.971606] arm-smmu-v3 9050000.smmuv3: event 0x10 received:
+>
+>> [    1.971607] arm-smmu-v3 9050000.smmuv3:      0x0000020000000010
+>
+>> [    1.974202] arm-smmu-v3 9050000.smmuv3:      0x0000020000000000
+>
+>> [    1.974634] arm-smmu-v3 9050000.smmuv3:      0x0000000000000000
+>
+>> [    1.975005] Freeing unused kernel memory: 10112K
+>
+>> [    1.975062] arm-smmu-v3 9050000.smmuv3:      0x0000000000000000
+>
+>> [    1.975442] Run init as init process
+>
+>>
+>
+>> Another information is that if "maxcpus=3" is removed from the kernel
+>
+>> command line,
+>
+>> it will be OK.
+>
+>>
+>
+>> I am not sure if there is a bug about vsmmu. It will be very appreciated if
+>
+>> anyone
+>
+>> know this issue or can take a look at it.
+>
+> thanks
+>
+> -- PMM
+>
+> .
+
+Hi Zhou,
+
+On Mon, Sep 9, 2024 at 3:22 PM Zhou Wang via <qemu-devel@nongnu.org> wrote:
+>
+>
+Hi All,
+>
+>
+When I tested mainline qemu(commit 7b87a25f49), it reports smmuv3 event 0x10
+>
+during kernel booting up.
+>
+>
+qemu command which I use is as below:
+>
+>
+qemu-system-aarch64 -machine
+>
+virt,kernel_irqchip=on,gic-version=3,iommu=smmuv3 \
+>
+-kernel Image -initrd minifs.cpio.gz \
+>
+-enable-kvm -net none -nographic -m 3G -smp 6 -cpu host \
+>
+-append 'rdinit=init console=ttyAMA0 ealycon=pl0ll,0x90000000 maxcpus=3' \
+>
+-device
+>
+pcie-root-port,port=0x8,chassis=0,id=pci.0,bus=pcie.0,multifunction=on,addr=0x2
+>
+\
+>
+-device pcie-root-port,port=0x9,chassis=1,id=pci.1,bus=pcie.0,addr=0x2.0x1 \
+>
+-device
+>
+virtio-blk-pci,drive=drive0,id=virtblk0,num-queues=8,packed=on,bus=pci.1 \
+>
+-drive file=/home/boot.img,if=none,id=drive0,format=raw
+>
+>
+smmuv3 event 0x10 log:
+>
+[...]
+>
+[    1.962656] virtio-pci 0000:02:00.0: Adding to iommu group 0
+>
+[    1.963150] virtio-pci 0000:02:00.0: enabling device (0000 -> 0002)
+>
+[    1.964707] virtio_blk virtio0: 6/0/0 default/read/poll queues
+>
+[    1.965759] virtio_blk virtio0: [vda] 2097152 512-byte logical blocks
+>
+(1.07 GB/1.00 GiB)
+>
+[    1.966934] arm-smmu-v3 9050000.smmuv3: event 0x10 received:
+>
+[    1.967442] input: gpio-keys as /devices/platform/gpio-keys/input/input0
+>
+[    1.967478] arm-smmu-v3 9050000.smmuv3:      0x0000020000000010
+>
+[    1.968381] clk: Disabling unused clocks
+>
+[    1.968677] arm-smmu-v3 9050000.smmuv3:      0x0000020000000000
+>
+[    1.968990] PM: genpd: Disabling unused power domains
+>
+[    1.969424] arm-smmu-v3 9050000.smmuv3:      0x0000000000000000
+>
+[    1.969814] ALSA device list:
+>
+[    1.970240] arm-smmu-v3 9050000.smmuv3:      0x0000000000000000
+>
+[    1.970471]   No soundcards found.
+>
+[    1.970902] arm-smmu-v3 9050000.smmuv3: event 0x10 received:
+>
+[    1.971600] arm-smmu-v3 9050000.smmuv3:      0x0000020000000010
+>
+[    1.971601] arm-smmu-v3 9050000.smmuv3:      0x0000020000000000
+>
+[    1.971601] arm-smmu-v3 9050000.smmuv3:      0x0000000000000000
+>
+[    1.971602] arm-smmu-v3 9050000.smmuv3:      0x0000000000000000
+>
+[    1.971606] arm-smmu-v3 9050000.smmuv3: event 0x10 received:
+>
+[    1.971607] arm-smmu-v3 9050000.smmuv3:      0x0000020000000010
+>
+[    1.974202] arm-smmu-v3 9050000.smmuv3:      0x0000020000000000
+>
+[    1.974634] arm-smmu-v3 9050000.smmuv3:      0x0000000000000000
+>
+[    1.975005] Freeing unused kernel memory: 10112K
+>
+[    1.975062] arm-smmu-v3 9050000.smmuv3:      0x0000000000000000
+>
+[    1.975442] Run init as init process
+>
+>
+Another information is that if "maxcpus=3" is removed from the kernel command
+>
+line,
+>
+it will be OK.
+>
+That's interesting, not sure how that would be related.
+
+>
+I am not sure if there is a bug about vsmmu. It will be very appreciated if
+>
+anyone
+>
+know this issue or can take a look at it.
+>
+Can you please provide logs with adding "-d trace:smmu*" to qemu invocation.
+
+Also if possible, can you please provide which Linux kernel version
+you are using, I will see if I can repro.
+
+Thanks,
+Mostafa
+
+>
+Thanks,
+>
+Zhou
+>
+>
+>
+
+On 2024/9/9 22:47, Mostafa Saleh wrote:
+>
+Hi Zhou,
+>
+>
+On Mon, Sep 9, 2024 at 3:22 PM Zhou Wang via <qemu-devel@nongnu.org> wrote:
+>
+>
+>
+> Hi All,
+>
+>
+>
+> When I tested mainline qemu(commit 7b87a25f49), it reports smmuv3 event 0x10
+>
+> during kernel booting up.
+>
+>
+>
+> qemu command which I use is as below:
+>
+>
+>
+> qemu-system-aarch64 -machine
+>
+> virt,kernel_irqchip=on,gic-version=3,iommu=smmuv3 \
+>
+> -kernel Image -initrd minifs.cpio.gz \
+>
+> -enable-kvm -net none -nographic -m 3G -smp 6 -cpu host \
+>
+> -append 'rdinit=init console=ttyAMA0 ealycon=pl0ll,0x90000000 maxcpus=3' \
+>
+> -device
+>
+> pcie-root-port,port=0x8,chassis=0,id=pci.0,bus=pcie.0,multifunction=on,addr=0x2
+>
+>  \
+>
+> -device pcie-root-port,port=0x9,chassis=1,id=pci.1,bus=pcie.0,addr=0x2.0x1 \
+>
+> -device
+>
+> virtio-blk-pci,drive=drive0,id=virtblk0,num-queues=8,packed=on,bus=pci.1 \
+>
+> -drive file=/home/boot.img,if=none,id=drive0,format=raw
+>
+>
+>
+> smmuv3 event 0x10 log:
+>
+> [...]
+>
+> [    1.962656] virtio-pci 0000:02:00.0: Adding to iommu group 0
+>
+> [    1.963150] virtio-pci 0000:02:00.0: enabling device (0000 -> 0002)
+>
+> [    1.964707] virtio_blk virtio0: 6/0/0 default/read/poll queues
+>
+> [    1.965759] virtio_blk virtio0: [vda] 2097152 512-byte logical blocks
+>
+> (1.07 GB/1.00 GiB)
+>
+> [    1.966934] arm-smmu-v3 9050000.smmuv3: event 0x10 received:
+>
+> [    1.967442] input: gpio-keys as /devices/platform/gpio-keys/input/input0
+>
+> [    1.967478] arm-smmu-v3 9050000.smmuv3:      0x0000020000000010
+>
+> [    1.968381] clk: Disabling unused clocks
+>
+> [    1.968677] arm-smmu-v3 9050000.smmuv3:      0x0000020000000000
+>
+> [    1.968990] PM: genpd: Disabling unused power domains
+>
+> [    1.969424] arm-smmu-v3 9050000.smmuv3:      0x0000000000000000
+>
+> [    1.969814] ALSA device list:
+>
+> [    1.970240] arm-smmu-v3 9050000.smmuv3:      0x0000000000000000
+>
+> [    1.970471]   No soundcards found.
+>
+> [    1.970902] arm-smmu-v3 9050000.smmuv3: event 0x10 received:
+>
+> [    1.971600] arm-smmu-v3 9050000.smmuv3:      0x0000020000000010
+>
+> [    1.971601] arm-smmu-v3 9050000.smmuv3:      0x0000020000000000
+>
+> [    1.971601] arm-smmu-v3 9050000.smmuv3:      0x0000000000000000
+>
+> [    1.971602] arm-smmu-v3 9050000.smmuv3:      0x0000000000000000
+>
+> [    1.971606] arm-smmu-v3 9050000.smmuv3: event 0x10 received:
+>
+> [    1.971607] arm-smmu-v3 9050000.smmuv3:      0x0000020000000010
+>
+> [    1.974202] arm-smmu-v3 9050000.smmuv3:      0x0000020000000000
+>
+> [    1.974634] arm-smmu-v3 9050000.smmuv3:      0x0000000000000000
+>
+> [    1.975005] Freeing unused kernel memory: 10112K
+>
+> [    1.975062] arm-smmu-v3 9050000.smmuv3:      0x0000000000000000
+>
+> [    1.975442] Run init as init process
+>
+>
+>
+> Another information is that if "maxcpus=3" is removed from the kernel
+>
+> command line,
+>
+> it will be OK.
+>
+>
+>
+>
+That's interesting, not sure how that would be related.
+>
+>
+> I am not sure if there is a bug about vsmmu. It will be very appreciated if
+>
+> anyone
+>
+> know this issue or can take a look at it.
+>
+>
+>
+>
+Can you please provide logs with adding "-d trace:smmu*" to qemu invocation.
+Sure. Please see the attached log(using above qemu commit and command).
+
+>
+>
+Also if possible, can you please provide which Linux kernel version
+>
+you are using, I will see if I can repro.
+I just use the latest mainline kernel(commit b831f83e40a2) with defconfig.
+
+Thanks,
+Zhou
+
+>
+>
+Thanks,
+>
+Mostafa
+>
+>
+> Thanks,
+>
+> Zhou
+>
+>
+>
+>
+>
+>
+>
+>
+.
+qemu_boot_log.txt
+Description:
+Text document
+
+On Tue, Sep 10, 2024 at 2:51 AM Zhou Wang <wangzhou1@hisilicon.com> wrote:
+>
+>
+On 2024/9/9 22:47, Mostafa Saleh wrote:
+>
+> Hi Zhou,
+>
+>
+>
+> On Mon, Sep 9, 2024 at 3:22 PM Zhou Wang via <qemu-devel@nongnu.org> wrote:
+>
+>>
+>
+>> Hi All,
+>
+>>
+>
+>> When I tested mainline qemu(commit 7b87a25f49), it reports smmuv3 event
+>
+>> 0x10
+>
+>> during kernel booting up.
+>
+>>
+>
+>> qemu command which I use is as below:
+>
+>>
+>
+>> qemu-system-aarch64 -machine
+>
+>> virt,kernel_irqchip=on,gic-version=3,iommu=smmuv3 \
+>
+>> -kernel Image -initrd minifs.cpio.gz \
+>
+>> -enable-kvm -net none -nographic -m 3G -smp 6 -cpu host \
+>
+>> -append 'rdinit=init console=ttyAMA0 ealycon=pl0ll,0x90000000 maxcpus=3' \
+>
+>> -device
+>
+>> pcie-root-port,port=0x8,chassis=0,id=pci.0,bus=pcie.0,multifunction=on,addr=0x2
+>
+>>  \
+>
+>> -device pcie-root-port,port=0x9,chassis=1,id=pci.1,bus=pcie.0,addr=0x2.0x1
+>
+>> \
+>
+>> -device
+>
+>> virtio-blk-pci,drive=drive0,id=virtblk0,num-queues=8,packed=on,bus=pci.1 \
+>
+>> -drive file=/home/boot.img,if=none,id=drive0,format=raw
+>
+>>
+>
+>> smmuv3 event 0x10 log:
+>
+>> [...]
+>
+>> [    1.962656] virtio-pci 0000:02:00.0: Adding to iommu group 0
+>
+>> [    1.963150] virtio-pci 0000:02:00.0: enabling device (0000 -> 0002)
+>
+>> [    1.964707] virtio_blk virtio0: 6/0/0 default/read/poll queues
+>
+>> [    1.965759] virtio_blk virtio0: [vda] 2097152 512-byte logical blocks
+>
+>> (1.07 GB/1.00 GiB)
+>
+>> [    1.966934] arm-smmu-v3 9050000.smmuv3: event 0x10 received:
+>
+>> [    1.967442] input: gpio-keys as /devices/platform/gpio-keys/input/input0
+>
+>> [    1.967478] arm-smmu-v3 9050000.smmuv3:      0x0000020000000010
+>
+>> [    1.968381] clk: Disabling unused clocks
+>
+>> [    1.968677] arm-smmu-v3 9050000.smmuv3:      0x0000020000000000
+>
+>> [    1.968990] PM: genpd: Disabling unused power domains
+>
+>> [    1.969424] arm-smmu-v3 9050000.smmuv3:      0x0000000000000000
+>
+>> [    1.969814] ALSA device list:
+>
+>> [    1.970240] arm-smmu-v3 9050000.smmuv3:      0x0000000000000000
+>
+>> [    1.970471]   No soundcards found.
+>
+>> [    1.970902] arm-smmu-v3 9050000.smmuv3: event 0x10 received:
+>
+>> [    1.971600] arm-smmu-v3 9050000.smmuv3:      0x0000020000000010
+>
+>> [    1.971601] arm-smmu-v3 9050000.smmuv3:      0x0000020000000000
+>
+>> [    1.971601] arm-smmu-v3 9050000.smmuv3:      0x0000000000000000
+>
+>> [    1.971602] arm-smmu-v3 9050000.smmuv3:      0x0000000000000000
+>
+>> [    1.971606] arm-smmu-v3 9050000.smmuv3: event 0x10 received:
+>
+>> [    1.971607] arm-smmu-v3 9050000.smmuv3:      0x0000020000000010
+>
+>> [    1.974202] arm-smmu-v3 9050000.smmuv3:      0x0000020000000000
+>
+>> [    1.974634] arm-smmu-v3 9050000.smmuv3:      0x0000000000000000
+>
+>> [    1.975005] Freeing unused kernel memory: 10112K
+>
+>> [    1.975062] arm-smmu-v3 9050000.smmuv3:      0x0000000000000000
+>
+>> [    1.975442] Run init as init process
+>
+>>
+>
+>> Another information is that if "maxcpus=3" is removed from the kernel
+>
+>> command line,
+>
+>> it will be OK.
+>
+>>
+>
+>
+>
+> That's interesting, not sure how that would be related.
+>
+>
+>
+>> I am not sure if there is a bug about vsmmu. It will be very appreciated
+>
+>> if anyone
+>
+>> know this issue or can take a look at it.
+>
+>>
+>
+>
+>
+> Can you please provide logs with adding "-d trace:smmu*" to qemu invocation.
+>
+>
+Sure. Please see the attached log(using above qemu commit and command).
+>
+Thanks a lot, it seems the SMMUv3 indeed receives a translation
+request with addr 0x0 which causes this event.
+I don't see any kind of modification (alignment) of the address in this path.
+So my hunch it's not related to the SMMUv3 and the initiator is
+issuing bogus addresses.
+
+>
+>
+>
+> Also if possible, can you please provide which Linux kernel version
+>
+> you are using, I will see if I can repro.
+>
+>
+I just use the latest mainline kernel(commit b831f83e40a2) with defconfig.
+>
+I see, I can't repro in my setup which has no "--enable-kvm" and with
+"-cpu max" instead of host.
+I will try other options and see if I can repro.
+
+Thanks,
+Mostafa
+>
+Thanks,
+>
+Zhou
+>
+>
+>
+>
+> Thanks,
+>
+> Mostafa
+>
+>
+>
+>> Thanks,
+>
+>> Zhou
+>
+>>
+>
+>>
+>
+>>
+>
+>
+>
+> .
+