restructure results

1 files changed, 0 insertions, 153 deletions

diff --git a/results/classifier/108/other/1687653 b/results/classifier/108/other/1687653
deleted file mode 100644
index cee2ea9c..00000000
--- a/results/classifier/108/other/1687653
+++ /dev/null
@@ -1,153 +0,0 @@
-graphic: 0.909
-semantic: 0.876
-performance: 0.796
-device: 0.790
-other: 0.785
-permissions: 0.778
-debug: 0.761
-PID: 0.756
-KVM: 0.753
-boot: 0.720
-vnc: 0.689
-files: 0.667
-socket: 0.662
-network: 0.655
-
-QEMU-KVM / detect_zeroes causes KVM to start unlimited number of threads on Guest-Sided High-IO with big Blocksize
-
-QEMU-KVM in combination with "detect_zeroes=on" makes a Guest able to DoS the Host. This is possible if the Host itself has "detect_zeroes" enabled and the Guest writes a large Chunk of data with a huge blocksize onto the drive.
-
-E.g.: dd if=/dev/zero of=/tmp/DoS bs=1G count=1 oflag=direct
-
-All QEMU-Versions after implementation of detect_zeroes are affected. Prior are unaffected. This is absolutely critical, please fix this ASAP!
-
-#####
-
-Provided by Dominik Csapak:
-
-source    , bs   , count     ,    O_DIRECT, behaviour
-
-urandom   , bs 1M, count 1024,    O_DIRECT: OK
-file      , bs 1M, count 1024,    O_DIRECT: OK
-/dev/zero , bs 1M, count 1024,    O_DIRECT: OK
-zero file , bs 1M, count 1024,    O_DIRECT: OK
-/dev/zero , bs 1G, count    1,    O_DIRECT: NOT OK
-zero file , bs 1G, count    1,    O_DIRECT: NOT OK
-zero file , bs 1G, count    1, no O_DIRECT: NOT OK
-rand file , bs 1G, count    1,    O_DIRECT: OK
-rand file , bs 1G, count    1, no O_DIRECT: OK
-
-discard on:
-
-urandom   , bs 1M, count 1024,    O_DIRECT: OK
-rand file , bs 1M, count 1024,    O_DIRECT: OK
-/dev/zero , bs 1M, count 1024,    O_DIRECT: OK
-zero file , bs 1M, count 1024,    O_DIRECT: OK
-/dev/zero , bs 1G, count    1,    O_DIRECT: NOT OK
-zero file , bs 1G, count    1,    O_DIRECT: NOT OK
-zero file , bs 1G, count    1, no O_DIRECT: NOT OK
-rand file , bs 1G, count    1,    O_DIRECT: OK
-rand file , bs 1G, count    1, no O_DIRECT: OK
-
-detect_zeros off:
-
-urandom   , bs 1M, count 1024,    O_DIRECT: OK
-rand file , bs 1M, count 1024,    O_DIRECT: OK
-/dev/zero , bs 1M, count 1024,    O_DIRECT: OK
-zero file , bs 1M, count 1024,    O_DIRECT: OK
-/dev/zero , bs 1G, count    1,    O_DIRECT: OK
-zero file , bs 1G, count    1,    O_DIRECT: OK
-zero file , bs 1G, count    1, no O_DIRECT: OK
-rand file , bs 1G, count    1,    O_DIRECT: OK
-rand file , bs 1G, count    1, no O_DIRECT: OK
-
-#####
-
-Provided by Florian Strankowski
-
-bs   -    count   -    io-threads
-
-512K -    2048    -    2
-1M   -    1024    -    2
-2M   -     512    -    4
-4M   -     256    -    6
-8M   -     128    -    10
-16M  -      64    -    18
-32M  -      32    -    uncountable
-
-Please refer to further information here: 
-
-https://bugzilla.proxmox.com/show_bug.cgi?id=1368
-
-
-
-Sorry ab out the visibility settings, this bugtracker drives me nuts.
-
-Just to make this clear: This bug affects only LVM-backed storages. File-based-storage is not affected. LVM-Thin and also LVM-Thick.
-
-Status changed to 'Confirmed' because the bug affects multiple users.
-
-I'm unable to reproduce this issue.  The host stays responsive and the dd command completes in a reasonable amount of time.  QEMU does not exceed the 64-thread pool size.
-
-Please post steps to reproduce the issue using a minimal command-line without libvirt.
-
-Here is information on my attempt to reproduce the problem:
-
-Guest: Kernel 4.10.8-200.fc25.x86_64
-Host: 4.10.11-200.fc25.x86_64
-QEMU: qemu.git/master (e619b14746e5d8c0e53061661fd0e1da01fd4d60)
-
-The LV is 1 GB on top of LUKS on a Samsung MZNLN256HCHP SATA SSD drive.
-
-mpstat -P ALL 5 output:
-11:02:02 AM  CPU    %usr   %nice    %sys %iowait    %irq   %soft  %steal  %guest  %gnice   %idle
-11:02:07 AM  all    3.36    0.00    6.22   34.54    0.25    0.50    0.00    3.11    0.00   52.03
-11:02:07 AM    0    2.82    0.00    5.63   32.39    0.80    1.21    0.00    3.22    0.00   53.92
-11:02:07 AM    1    3.02    0.00    6.04   28.77    0.20    0.20    0.00    3.02    0.00   58.75
-11:02:07 AM    2    3.56    0.00    7.71   44.27    0.20    0.40    0.00    2.37    0.00   41.50
-11:02:07 AM    3    3.81    0.00    5.61   32.46    0.00    0.40    0.00    4.01    0.00   53.71
-
-vmstat 5 output:
-procs -----------memory---------- ---swap-- -----io---- -system-- ------cpu-----
- r  b   swpd   free   buff  cache   si   so    bi    bo   in   cs us sy id wa st
- 0  0      0 1617404   6484 3541468    0    0  2145 84794 1976 8814  8  8 64 20  0
- 0  0      0 1619492   6484 3538592    0    0   613 69340 1518 7430  6  7 70 17  0
- 0  0      0 1618920   6484 3538680    0    0   280 75199 1421 6811  6  7 52 35  0
-
-pidstat -v -p $PID_OF_QEMU 5 output:
-11:01:08 AM   UID       PID threads   fd-nr  Command
-11:02:03 AM     0     13043      67      37  qemu-system-x86
-11:02:08 AM     0     13043      67      37  qemu-system-x86
-11:02:13 AM     0     13043      67      37  qemu-system-x86
-
-$ sudo x86_64-softmmu/qemu-system-x86_64 -enable-kvm -m 1024 -cpu host \
-        -device virtio-scsi-pci,id=scsihw0,bus=pci.0,addr=0x5 \
-        -drive file=test.img,if=none,id=drive-scsi0,format=raw,cache=none,aio=native,detect-zeroes=on \
-        -device scsi-hd,bus=scsihw0.0,channel=0,scsi-id=0,lun=0,drive=drive-scsi0,id=scsi0,bootindex=100 \
-        -drive file=/dev/path/to/testlv,if=none,id=drive-scsi1,format=raw,cache=none,aio=native,detect-zeroes=on \
-        -device scsi-hd,bus=scsihw0.0,channel=0,scsi-id=0,lun=1,drive=drive-scsi1,id=scsi1,bootindex=101 \
-        -nographic
-
-guest# dd if=/dev/zero of=/dev/sdb bs=1G count=1 oflag=direct
-1+0 records in
-1+0 records out
-1073741824 bytes (1.1 GB, 1.0 GiB) copied, 15.0681 s, 71.3 MB/s
-
-Please be so kind and go for a 6G LVM-Vol and do "dd if=/dev/zero of=/dev/sdb bs=3G count=2 oflag=direct". Please keep an eye on your processor usage in comparison to the threads created. Its harder to knock-down an SSD-Backed system than one with spinners.
-
-
-
-After further investigation on IRC the following points were raised:
-
-1. Non-vcpu threads in QEMU weren't being isolated.  Libvirt can do this
-   using the <cputune> domain XML element.  The guest can create a high
-   load if some QEMU threads are unconstrained.
-
-2. The wait% CPU stat was causing confusion.  It's the idle time during
-   which synchronous I/O is pending.  High wait% does not mean that the
-   system is under high CPU load.  detect-zeroes=on can take a
-   synchronous I/O path even when aio=native is used, and this results
-   in wait% instead of idle%.
-
-I'm closing the bug.
-