restructure results

1 files changed, 0 insertions, 184 deletions

diff --git a/results/classifier/118/peripherals/795866 b/results/classifier/118/peripherals/795866
deleted file mode 100644
index 6c85e005..00000000
--- a/results/classifier/118/peripherals/795866
+++ /dev/null
@@ -1,184 +0,0 @@
-peripherals: 0.891
-hypervisor: 0.862
-mistranslation: 0.858
-user-level: 0.851
-register: 0.821
-risc-v: 0.813
-assembly: 0.802
-performance: 0.799
-TCG: 0.799
-debug: 0.788
-semantic: 0.779
-permissions: 0.776
-vnc: 0.774
-arm: 0.761
-virtual: 0.757
-graphic: 0.757
-ppc: 0.754
-x86: 0.743
-PID: 0.735
-device: 0.729
-i386: 0.725
-VMM: 0.721
-KVM: 0.721
-architecture: 0.714
-kernel: 0.703
-files: 0.701
-boot: 0.681
-socket: 0.680
-network: 0.665
-
-pci passthrough doesn´t work
-
-Hi all,
-
-I have some problems passing through a pci device to kvm guest.
-First I have to say that I´m using the latest kvm-kernel und qemu-kvm from git-tree (Date 11.06.2011).
-
-I want´t to passthrough this device to guest:
-
-lspci-output:
-
-02:00.0 Multimedia video controller: Micronas Semiconductor Holding AG Device 0720 (rev 01)
-
-So at first I have bind the driver to psi-stub:
-
-modprobe -r kvm-intel
-modprobe -r kvm
-echo "18c3 0720" > /sys/bus/pci/drivers/pci-stub/new_id
-echo 0000:02:00.0  > /sys/bus/pci/devices/0000:02:00.0/driver/unbind
-echo 0000:02:00.0  > /sys/bus/pci/drivers/pci-stub/bind
-modprobe kvm
-modprobe kvm-intel
-
-Then I have assigned device to guest:
--device pci-assign,host=02:00.0
-
-When I start the guest. The device succesfully get´s an msi-IRQ on host-system:
-
-cat /proc/interrupt output:
-
- 32:          0          0          0          0   PCI-MSI-edge      kvm_assigned_msi_device
-
-
-On guest device is visibel:
-
-lspci output:
-00:04.0 Multimedia video controller: Micronas Semiconductor Holding AG Device 0720 (rev 01)
-
-
-Sometimes the device (on guest) get´s an IRQ between 10-16:
-
-00:05.0 Multimedia video controller: Micronas Semiconductor Holding AG Device 0720 (rev 01)
-        Subsystem: Micronas Semiconductor Holding AG Device dd00
-        Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
-        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+
-        Interrupt: pin A routed to IRQ 11
-        Region 0: Memory at f2050000 (32-bit, non-prefetchable) [size=64K]
-        Region 1: Memory at f2060000 (32-bit, non-prefetchable) [size=64K]
-        Capabilities: [58] Express (v1) Endpoint, MSI 00
-                DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
-                        ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
-                DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
-                        RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
-                        MaxPayload 128 bytes, MaxReadReq 128 bytes
-                DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
-                LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0 unlimited, L1 unlimited
-                        ClockPM- Suprise- LLActRep- BwNot-
-                LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
-                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
-                LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
-        Capabilities: [40] Power Management version 2
-                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
-                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
-        Capabilities: [48] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
-                Address: 00000000  Data: 0000
-        Kernel modules: ngene
-
-
-In this case the kernel-modul (ngene) can not access the device:
-
-dmesg | grep ngene
-
-[   69.977900] ngene 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, high) -> IRQ 11
-[   69.977909] ngene: Found Linux4Media cineS2 DVB-S2 Twin Tuner (v5)
-[   69.978962] ngene 0000:00:05.0: setting latency timer to 64
-[   69.979118] ngene: Device version 1
-[   69.979129] ngene 0000:00:05.0: firmware: requesting ngene_18.fw
-[   69.980884] ngene: Loading firmware file ngene_18.fw.
-[   71.981052] ngene: Command timeout cmd=01 prev=00
-[   71.981205] host_to_ngene (c000): 01 00 00 00 00 00 00 00
-[   71.981457] ngene_to_host (c100): 00 00 00 00 00 00 00 00
-[   71.981704] dev->hosttongene (ec902000): 01 00 00 00 00 00 00 00
-[   71.981963] dev->ngenetohost (ec902100): 00 00 00 00 00 00 00 00
-[   73.985111] ngene: Command timeout cmd=02 prev=00
-[   73.985415] host_to_ngene (c000): 02 04 00 d0 00 04 00 00
-[   73.985684] ngene_to_host (c100): 00 00 00 00 00 00 00 00
-[   73.985931] dev->hosttongene (ec902000): 02 04 00 d0 00 04 00 00
-[   73.986191] dev->ngenetohost (ec902100): 00 00 00 00 00 00 00 00
-[   73.986568] ngene 0000:00:05.0: PCI INT A disabled
-[   73.986584] ngene: probe of 0000:00:05.0 failed with error -1
-
-
-Sometimes the device (on guest) gets an msi-irq f. e. IRQ 29.
-Then kernel-modul (ngene) can succesfully load the driver and all works fine.
-
-
-Short to say:
-
-HOST 	GUEST		STATUS
-MSI-IRQ	MSI-IRQ		ALL FINE
-MSI-IRQ IOAPIC-IRQ	DOESN´t WORK
-
-with modinfo I had a look at the kernel-modul if there is way to force msi, but without success.
-
-But I think IRQ between (10-16) should also work because when I load the kernel-modul on host with IRQ (10-16)
-it works. (Device only get´s an MSI-IRQ If I start the vm to passthrough)
-
-Do anyone know where can be the problem?
-
-Here is the dmesg - output of second device which is currently working on guest with MSI-IRQ 29:
-
-[    2.137175] ngene 0000:00:04.0: PCI INT A -> Link[LNKD] -> GSI 11 (level, high) -> IRQ 11
-[    2.137183] ngene: Found Linux4Media cineS2 DVB-S2 Twin Tuner (v5)
-[    2.140506] ngene 0000:00:04.0: setting latency timer to 64
-[    2.140679] ngene: Device version 1
-[    2.140693] ngene 0000:00:04.0: firmware: requesting ngene_18.fw
-[    2.214848] ngene: Loading firmware file ngene_18.fw.
-[    2.249797] ngene 0000:00:04.0: irq 29 for MSI/MSI-X
-
-
-
-
-lspci - output on guest:
-
-00:04.0 Multimedia video controller: Micronas Semiconductor Holding AG Device 0720 (rev 01)
-        Subsystem: Micronas Semiconductor Holding AG Device dd00
-        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
-        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+
-        Latency: 0, Cache Line Size: 64 bytes
-        Interrupt: pin A routed to IRQ 29
-        Region 0: Memory at f2030000 (32-bit, non-prefetchable) [size=64K]
-        Region 1: Memory at f2040000 (32-bit, non-prefetchable) [size=64K]
-        Capabilities: <access denied>
-        Kernel driver in use: ngene
-        Kernel modules: ngene
-
-00:05.0 Multimedia video controller: Micronas Semiconductor Holding AG Device 0720 (rev 01)
-        Subsystem: Micronas Semiconductor Holding AG Device dd00
-        Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
-        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+
-        Interrupt: pin A routed to IRQ 11
-        Region 0: Memory at f2050000 (32-bit, non-prefetchable) [size=64K]
-        Region 1: Memory at f2060000 (32-bit, non-prefetchable) [size=64K]
-        Capabilities: <access denied>
-        Kernel modules: ngene
-
-
-IRQ 11 not working.
-IRQ 29 working
-
-Triaging old bug tickets ... can you still reproduce this problem with the latest version of QEMU? Or can we close this ticket nowadays?
-
-[Expired for QEMU because there has been no activity for 60 days.]
-