1 files changed, 65 insertions, 0 deletions
diff --git a/results/classifier/deepseek-r1:14b/reasoning/manual-review/1785197 b/results/classifier/deepseek-r1:14b/reasoning/manual-review/1785197
new file mode 100644
index 00000000..db52d5d9
--- /dev/null
+++ b/results/classifier/deepseek-r1:14b/reasoning/manual-review/1785197
@@ -0,0 +1,65 @@
+<think>
+Okay, I need to classify the given QEMU/KVM command line parameters into different categories for better understanding and organization. Let's go through each parameter one by one.
+
+Starting with processor configuration: mlock=off means that the process won't be memory locked. Then smp 2 specifies two virtual CPUs, but maxcpus=24 allows up to 24 if needed. Sockets=24 implies 24 physical sockets, cores=1 and threads=1 mean each socket has one core with single threading.
+
+Moving on to NUMA configuration: nodeid=0 covers all cpus from 0-23, and mem=4096 assigns 4GB of memory to this node. The UUID is provided for identification purposes.
+
+For device configurations, there are various USB controllers (usb, usb1, usb2) and a SCSI controller (scsi1). Storage devices include virtio-disk0 using a QCOW2 image and an FDC drive from a VirtIO floppy image.
+
+Network settings use tap devices with vhost=on for better performance, and a VirtIO network interface is set up with a specific MAC address.
+
+Display options include VNC and SPICE for remote access. QXL-VGA is used as the graphics card with specified memory sizes. A Virtio balloon device is included for memory management.
+
+Character devices cover serial ports (charserial0) and VirtSerialPort for guest agent communication. Input is handled by a USB tablet, and there's an agent socket defined.
+
+Finally, other settings like no-user-config, nodefaults, base=localtime, disable_s3 and s4 in PM, strict booting, hpet and shutdown controls are specified. Timestamps are enabled for logging.
+</think>
+
+The provided QEMU/KVM command line is classified into the following categories:
+
+1. **Processor Configuration:**
+   - `mlock=off`: Disables memory locking
+   - `smp 2,maxcpus=24`: Configures Symmetric Multiprocessing with 2 CPUs, maximum of 24 allowed
+   - `sockets=24,cores=1,threads=1`: Specifies hardware configuration (24 sockets, each with 1 core and 1 thread)
+
+2. **NUMA Configuration:**
+   - `-numa node,nodeid=0,cpus=0-23,mem=4096`: Defines a NUMA node with ID 0, covering CPUs 0-23 and 4GB memory
+
+3. **Device Configurations:**
+   - USB controllers:
+     - `piix3-usb-uhci` (ID: usb)
+     - `usb-ehci` (ID: usb1)
+     - `nec-usb-xhci` (ID: usb2)
+   - SCSI controller: `virtio-scsi-pci` (ID: scsi1)
+   - Serial Port: `virtio-serial-pci` (ID: virtio-serial0)
+   - Storage:
+     - VirtIO Block Device for hard disk
+     - USB Floppy Drive
+
+4. **Network Settings:**
+   - `-netdev tap,fd=62,id=hostnet0,vhost=on,vhostfd=63`: TAP network device with vhost acceleration
+   - `virtio-net-pci` (ID: net0): VirtIO network interface
+
+5. **Display and Graphics:**
+   - VNC: `-vnc 0.0.0.0:0`
+   - SPICE: `spice port=5901,tls-port=5902,addr=0.0.0.0,disable-ticketing,...`
+   - VGA: `qxl-vga` with specific memory allocations
+
+6. **Input/Output Devices:**
+   - USB Tablet
+   - Serial Port (ISA and VirtSerialPort)
+
+7. **Storage Images:**
+   - QCOW2 Image for Windows 10
+   - ISO images for FDC and CDROM drives
+
+8. **Other Settings:**
+   - No user config, no defaults
+   - RTC settings, base=localtime
+   - PM (Power Management) settings to disable S3 and S4 states
+   - Strict boot order
+   - Balloon device for memory management
+   - Agent socket definitions
+
+This command sets up a virtual machine with specific hardware configurations, network interfaces, display options, and storage devices tailored for running Windows 10.
\ No newline at end of file