path: root/results/classifier/zero-shot/105/vnc/1618431

vnc: 0.748
KVM: 0.742
graphic: 0.681
mistranslation: 0.637
other: 0.622
device: 0.603
network: 0.575
instruction: 0.563
boot: 0.561
socket: 0.545
semantic: 0.535
assembly: 0.532

windows hangs after live migration with virtio

Several of our users reported problems with windows machines hanging
after live migrations. The common denominator _seems_ to be virtio
devices.
I've managed to reproduce this reliably on a windows 10 (+
virtio-win-0.1.118) guest, always within 1 to 5 migrations, with a
virtio-scsi hard drive and a virtio-net network device. (When I
replace the virtio-net device with an e1000 it takes 10 or more
migrations, and without virtio devices I have not (yet) been able to
reproduce this problem. I also could not reproduce this with a linux
guest. Also spice seems to improve the situation, but doesn't solve
it completely).

I've tested quite a few tags from qemu-git (v2.2.0 through v2.6.1,
and 2.6.1 with the patches mentioned on qemu-stable by Peter Lieven)
and the behavior is the same everywhere.

The reproducibility seems to be somewhat dependent on the host
hardware, which makes investigating this issue that much harder.

Symptoms:
After the migration the windows graphics stack just hangs.
Background processes are still running (eg. after installing an ssh
server I could still login and get a command prompt after the hang was
triggered... not that I'd know what to do with that on a windows
machine...) - commands which need no GUI access work, the rest just
hangs there on the command line, too.
It's also capable of responding to an NMI sent via the qemu monitor:
it then seems to "recover" and manages to show the blue sad-face
screen that something happened, reboots successfully and is usable
again without restarting the qemu process in between.
From there whole the process can be repeated.

Here's what our command line usually looks like:

/usr/bin/qemu -daemonize \
	-enable-kvm \
	-chardev socket,id=qmp,path=/var/run/qemu-server/101.qmp,server,nowait -mon chardev=qmp,mode=control \
	-pidfile /var/run/qemu-server/101.pid \
	-smbios type=1,uuid=07fc916e-24c2-4eef-9827-4ab4026501d4 \
	-name win10 \
	-smp 6,sockets=1,cores=6,maxcpus=6 \
	-nodefaults \
	-boot menu=on,strict=on,reboot-timeout=1000 \
	-vga std \
	-vnc unix:/var/run/qemu-server/101.vnc \
	-no-hpet \
	-cpu kvm64,hv_spinlocks=0x1fff,hv_vapic,hv_time,hv_reset,hv_vpindex,hv_runtime,hv_relaxed,+lahf_lm,+sep,+kvm_pv_unhalt,+kvm_pv_eoi,enforce \
	-m 2048 \
	-device pci-bridge,id=pci.2,chassis_nr=2,bus=pci.0,addr=0x1f \
	-device pci-bridge,id=pci.1,chassis_nr=1,bus=pci.0,addr=0x1e \
	-device piix3-usb-uhci,id=uhci,bus=pci.0,addr=0x1.0x2 \
	-device usb-tablet,id=tablet,bus=uhci.0,port=1 \
	-device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x3 \
	-iscsi initiator-name=iqn.1993-08.org.debian:01:1ba48d46fb8 \
	-drive if=none,id=drive-ide0,media=cdrom,aio=threads \
	-device ide-cd,bus=ide.0,unit=0,drive=drive-ide0,id=ide0,bootindex=200 \
	-device virtio-scsi-pci,id=scsihw0,bus=pci.0,addr=0x5 \
	-drive file=/mnt/pve/data1/images/101/vm-101-disk-1.qcow2,if=none,id=drive-scsi0,cache=writeback,discard=on,format=qcow2,aio=threads,detect-zeroes=unmap \
	-device scsi-hd,bus=scsihw0.0,channel=0,scsi-id=0,lun=0,drive=drive-scsi0,id=scsi0,bootindex=100 \
	-netdev type=tap,id=net0,ifname=tap101i0,script=/var/lib/qemu-server/pve-bridge,downscript=/var/lib/qemu-server/pve-bridgedown,vhost=on \
	-device virtio-net-pci,mac=F2:2B:20:37:E6:D7,netdev=net0,bus=pci.0,addr=0x12,id=net0,bootindex=300 \
	-rtc driftfix=slew,base=localtime \
	-global kvm-pit.lost_tick_policy=discard

I'm not sure it's virtio - I've got similar cases which happen even without any virtio; for me it goes away if you enable hpet or switch you kvm-put.lost_tick_policy=delay.

Dave

As the virtio related parts aren't the ones hanging (network and disks
still work...) it's unlikely, but it makes a night and day difference.

Removing -no-hpet as suggested does seem to make a difference, too.
(Changing the tick policy doesn't, for me.)
However, I've found that there are various options which when changed
can massively influence the likelihood of hangs - but it's not always
the same options for all VMs.
With the difference being hangups after 1 to at most 2 migrations with
one setting, or the VMs still being alive and kicking after 20 and
more migrations with the other.
However the options I've tested appear to be unrelated. Eq. in my test
setups this happened with VNC settings, CPU types, toggling our
backend's ssh tunnel for encryption (which should cause nothing but
changes in timing from the perspective of qemu); and of course
replacing virtio devices always had this effect in my tests.
All this might point to some kind of race condition or time keeping
problem, but I can't seem to pinpoint it.

Enabling hpet isn't a good option btw., since #599958 [Timedrift
problems with Win7: hpet missing time drift fixups] appears to
still be an open issue. => https://bugs.launchpad.net/qemu/+bug/599958
(This entry is from 2010 :-( )

I can reproduce this bug also on Ubuntu 16.04 with libvirt.
The interesting thing is that this bug triggers faster,
if I use tunneled migration instead direct.
Using the virt-manager for migration.

The test VM is a Win10 with virtio driver from fedora 0.1.118.

<!--
WARNING: THIS IS AN AUTO-GENERATED FILE. CHANGES TO IT ARE LIKELY TO BE
OVERWRITTEN AND LOST. Changes to this xml configuration should be made using:
  virsh edit win10-1
or other application using the libvirt API.
-->

<domain type='kvm'>
  <name>win10-1</name>
  <uuid>4b3533c1-20d4-4556-9d99-4fb3d04b19dc</uuid>
  <memory unit='KiB'>2097152</memory>
  <currentMemory unit='KiB'>2097152</currentMemory>
  <vcpu placement='static'>6</vcpu>
  <os>
    <type arch='x86_64' machine='pc-i440fx-wily'>hvm</type>
  </os>
  <features>
    <acpi/>
    <apic/>
    <hyperv>
      <relaxed state='on'/>
      <vapic state='on'/>
      <spinlocks state='on' retries='8191'/>
    </hyperv>
  </features>
  <cpu mode='custom' match='exact'>
    <model fallback='allow'>Haswell-noTSX</model>
    <topology sockets='1' cores='6' threads='1'/>
  </cpu>
  <clock offset='localtime'>
    <timer name='rtc' tickpolicy='catchup'/>
    <timer name='pit' tickpolicy='delay'/>
    <timer name='hpet' present='no'/>
    <timer name='hypervclock' present='yes'/>
  </clock>
  <on_poweroff>destroy</on_poweroff>
  <on_reboot>restart</on_reboot>
  <on_crash>restart</on_crash>
  <pm>
    <suspend-to-mem enabled='no'/>
    <suspend-to-disk enabled='no'/>
  </pm>
  <devices>
    <emulator>/usr/bin/kvm-spice</emulator>
    <disk type='file' device='disk'>
      <driver name='qemu' type='qcow2' cache='none' io='threads'/>
      <source file='/mnt/traini3/vm-win10-1.qcow2'/>
      <target dev='sda' bus='scsi'/>
      <boot order='1'/>
      <address type='drive' controller='0' bus='0' target='0' unit='0'/>
    </disk>
    <disk type='file' device='cdrom'>
      <driver name='qemu' type='raw'/>
      <source file='/mnt/nasi/template/iso/Win10_EnglishInternational_x64.iso'/>
      <target dev='hdb' bus='ide'/>
      <readonly/>
      <boot order='2'/>
      <address type='drive' controller='0' bus='0' target='0' unit='1'/>
    </disk>
    <disk type='file' device='cdrom'>
      <driver name='qemu' type='raw' cache='none'/>
      <source file='/mnt/nasi/template/iso/virtio-win-0.1.118.iso'/>
      <target dev='hdc' bus='ide'/>
      <readonly/>
      <boot order='3'/>
      <address type='drive' controller='0' bus='1' target='0' unit='0'/>
    </disk>
    <controller type='usb' index='0' model='ich9-ehci1'>
      <address type='pci' domain='0x0000' bus='0x00' slot='0x05' function='0x7'/>
    </controller>
    <controller type='usb' index='0' model='ich9-uhci1'>
      <master startport='0'/>
      <address type='pci' domain='0x0000' bus='0x00' slot='0x05' function='0x0' multifunction='on'/>
    </controller>
    <controller type='usb' index='0' model='ich9-uhci2'>
      <master startport='2'/>
      <address type='pci' domain='0x0000' bus='0x00' slot='0x05' function='0x1'/>
    </controller>
    <controller type='usb' index='0' model='ich9-uhci3'>
      <master startport='4'/>
      <address type='pci' domain='0x0000' bus='0x00' slot='0x05' function='0x2'/>
    </controller>
    <controller type='scsi' index='0' model='virtio-scsi'>
      <address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/>
    </controller>
    <controller type='ide' index='0'>
      <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x1'/>
    </controller>
    <controller type='pci' index='0' model='pci-root'/>
    <interface type='bridge'>
      <mac address='52:54:00:2e:4f:ea'/>
      <source bridge='vmbr0'/>
      <model type='virtio'/>
      <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/>
    </interface>
    <serial type='pty'>
      <target port='0'/>
    </serial>
    <console type='pty'>
      <target type='serial' port='0'/>
    </console>
    <input type='tablet' bus='usb'/>
    <input type='mouse' bus='ps2'/>
    <input type='keyboard' bus='ps2'/>
    <graphics type='vnc' port='-1' autoport='yes' listen='0.0.0.0'>
      <listen type='address' address='0.0.0.0'/>
    </graphics>
    <video>
      <model type='cirrus' vram='16384' heads='1'/>
      <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0'/>
    </video>
    <memballoon model='virtio'>
      <address type='pci' domain='0x0000' bus='0x00' slot='0x06' function='0x0'/>
    </memballoon>
  </devices>
</domain>


When I set -rtc clock=vm the mig problem is solved, but what does this flag exactly?

In the docu there is only 

" If you want to isolate the guest time from the host, you can set clock to "rt" instead.
  To even prevent it from progressing during suspension, you can set it to "vm"."

what does this means?

Will the VM never be synced with the HW clock and so it will run slower on cpu load on normal running?

Hmm, I'd not tried that one; I don't think that should change the behaviour during normal running, but the behaviour on pause and interactions with things like host ntp clock syncing is probably different - how different I'd have to dig in a bit more.

However,  we've done two patches this week that help windows migration - I'd be interested if either of them help your case;

https://lists.gnu.org/archive/html/qemu-devel/2016-09/msg02658.html is a qemu fix (now in current head qemu) that I wrote that helps one windows migration test case.

https://lkml.org/lkml/2016/9/14/857 is a kernel fix that fixes some related problems.

If one or both of these fixes together help I'd love to know either way!

Dave

Thank I test the 2 patches and they worked for me.
It works also if you apply only the qemu patch,
in combination the ubuntu kernel 4.4.0-38.57 and qemu 2.6.1.

Excellent news; thanks for testing!

Hi WOLI,
  Note, if you pick up a new (4.8 ish) kernel you'll probably find you'll need to also pick up two patches that we've just posted to the qemu list:

    target-i386: introduce kvm_put_one_msr
    kvm: apic: set APIC base as part of kvm_apic_put

otherwise you get weird reboot hangs with Linux guests.

Dave

The patches should be part of QEMU v2.8 ==> Fix released