Merge remote-tracking branch 'bonzini/scsi-next' into staging

# By Hervé Poussineau (5) and Stefan Weil (1)
# Via Paolo Bonzini
* bonzini/scsi-next:
  block/iscsi: Drop iscsi_co_get_block_status for older versions of libiscsi
  lsi: add 53C810 variant
  lsi: remove todo
  lsi: ignore write accesses to CTEST0 registers
  lsi: check ssid versus sdid only if ssid is valid
  lsi: use constant name instead of its value

3 files changed, 34 insertions, 5 deletions

diff --git a/block/iscsi.c b/block/iscsi.c
index b6b47c649c..4460382811 100644
--- a/block/iscsi.c
+++ b/block/iscsi.c
@@ -811,6 +811,8 @@ iscsi_getlength(BlockDriverState *bs)
     return len;
 }
 
+#if defined(SCSI_PROVISIONING_TYPE_DEALLOCATED)
+
 static int64_t coroutine_fn iscsi_co_get_block_status(BlockDriverState *bs,
                                                   int64_t sector_num,
                                                   int nb_sectors, int *pnum)
@@ -901,6 +903,8 @@ out:
     return ret;
 }
 
+#endif /* SCSI_PROVISIONING_TYPE_DEALLOCATED */
+
 static int
 coroutine_fn iscsi_co_discard(BlockDriverState *bs, int64_t sector_num,
                                    int nb_sectors)
@@ -1524,7 +1528,9 @@ static BlockDriver bdrv_iscsi = {
     .bdrv_getlength  = iscsi_getlength,
     .bdrv_truncate   = iscsi_truncate,
 
+#if defined(SCSI_PROVISIONING_TYPE_DEALLOCATED)
     .bdrv_co_get_block_status = iscsi_co_get_block_status,
+#endif
     .bdrv_co_discard      = iscsi_co_discard,
 
     .bdrv_aio_readv  = iscsi_aio_readv,
diff --git a/hw/scsi/lsi53c895a.c b/hw/scsi/lsi53c895a.c
index 5affc82d2b..36e5f50360 100644
--- a/hw/scsi/lsi53c895a.c
+++ b/hw/scsi/lsi53c895a.c
@@ -7,8 +7,11 @@
  * This code is licensed under the LGPL.
  */
 
-/* ??? Need to check if the {read,write}[wl] routines work properly on
-   big-endian targets.  */
+/* Note:
+ * LSI53C810 emulation is incorrect, in the sense that it supports
+ * features added in later evolutions. This should not be a problem,
+ * as well-behaved operating systems will not try to use them.
+ */
 
 #include <assert.h>
 
@@ -278,6 +281,7 @@ typedef struct {
     uint32_t script_ram[2048];
 } LSIState;
 
+#define TYPE_LSI53C810  "lsi53c810"
 #define TYPE_LSI53C895A "lsi53c895a"
 
 #define LSI53C895A(obj) \
@@ -1515,7 +1519,7 @@ static uint8_t lsi_reg_readb(LSIState *s, int offset)
            used for diagnostics, so should be ok.  */
         return 0;
     case 0xc: /* DSTAT */
-        tmp = s->dstat | 0x80;
+        tmp = s->dstat | LSI_DSTAT_DFE;
         if ((s->istat0 & LSI_ISTAT0_INTF) == 0)
             s->dstat = 0;
         lsi_update_irq(s);
@@ -1699,8 +1703,9 @@ static void lsi_reg_writeb(LSIState *s, int offset, uint8_t val)
         s->sxfer = val;
         break;
     case 0x06: /* SDID */
-        if ((val & 0xf) != (s->ssid & 0xf))
+        if ((s->ssid & 0x80) && (val & 0xf) != (s->ssid & 0xf)) {
             BADF("Destination ID does not match SSID\n");
+        }
         s->sdid = val & 0xf;
         break;
     case 0x07: /* GPREG0 */
@@ -1742,6 +1747,9 @@ static void lsi_reg_writeb(LSIState *s, int offset, uint8_t val)
     case 0x17: /* MBOX1 */
         s->mbox1 = val;
         break;
+    case 0x18: /* CTEST0 */
+        /* nothing to do */
+        break;
     case 0x1a: /* CTEST2 */
 	s->ctest2 = val & LSI_CTEST2_PCICIE;
 	break;
@@ -2106,7 +2114,7 @@ static int lsi_scsi_init(PCIDevice *dev)
                           "lsi-io", 256);
 
     pci_register_bar(dev, 0, PCI_BASE_ADDRESS_SPACE_IO, &s->io_io);
-    pci_register_bar(dev, 1, 0, &s->mmio_io);
+    pci_register_bar(dev, 1, PCI_BASE_ADDRESS_SPACE_MEMORY, &s->mmio_io);
     pci_register_bar(dev, 2, PCI_BASE_ADDRESS_SPACE_MEMORY, &s->ram_io);
     QTAILQ_INIT(&s->queue);
 
@@ -2144,9 +2152,23 @@ static const TypeInfo lsi_info = {
     .class_init    = lsi_class_init,
 };
 
+static void lsi53c810_class_init(ObjectClass *klass, void *data)
+{
+    PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
+
+    k->device_id = PCI_DEVICE_ID_LSI_53C810;
+}
+
+static TypeInfo lsi53c810_info = {
+    .name          = TYPE_LSI53C810,
+    .parent        = TYPE_LSI53C895A,
+    .class_init    = lsi53c810_class_init,
+};
+
 static void lsi53c895a_register_types(void)
 {
     type_register_static(&lsi_info);
+    type_register_static(&lsi53c810_info);
 }
 
 type_init(lsi53c895a_register_types)
diff --git a/include/hw/pci/pci_ids.h b/include/hw/pci/pci_ids.h
index 3ddaf6aad5..4c0002beca 100644
--- a/include/hw/pci/pci_ids.h
+++ b/include/hw/pci/pci_ids.h
@@ -53,6 +53,7 @@
 /* Vendors and devices.  Sort key: vendor first, device next. */
 
 #define PCI_VENDOR_ID_LSI_LOGIC          0x1000
+#define PCI_DEVICE_ID_LSI_53C810         0x0001
 #define PCI_DEVICE_ID_LSI_53C895A        0x0012
 #define PCI_DEVICE_ID_LSI_SAS1078        0x0060