Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20141223' into staging

target-arm queue:
 * enable 32-bit EL3 (TrustZone) for vexpress and virt boards
 * add fw_cfg device to virt board for UEFI firmware config
 * support passing commandline kernel/initrd to firmware

# gpg: Signature made Tue 23 Dec 2014 13:50:33 GMT using RSA key ID 14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"

* remotes/pmaydell/tags/pull-target-arm-20141223: (31 commits)
  hw/arm/virt: enable passing of EFI-stubbed kernel to guest UEFI firmware
  hw/arm: pass pristine kernel image to guest firmware over fw_cfg
  hw/loader: split out load_image_gzipped_buffer()
  arm: add fw_cfg to "virt" board
  fw_cfg_mem: expose the "data_width" property with fw_cfg_init_mem_wide()
  fw_cfg_mem: introduce the "data_width" property
  exec: allows 8-byte accesses in subpage_ops
  fw_cfg_mem: flip ctl_mem_ops and data_mem_ops to DEVICE_BIG_ENDIAN
  fw_cfg_mem: max access size and region size are the same for data register
  fw_cfg: move boards to fw_cfg_init_io() / fw_cfg_init_mem()
  fw_cfg: hard separation between the MMIO and I/O port mappings
  target-arm: add cpu feature EL3 to CPUs with Security Extensions
  target-arm: Disable EL3 on unsupported machines
  target-arm: Breakout integratorcp and versatilepb cpu init
  target-arm: Set CPU has_el3 prop during virt init
  target-arm: Enable CPU has_el3 prop during VE init
  target-arm: Add arm_boot_info secure_boot control
  target-arm: Add ARMCPU secure property
  target-arm: Add feature unset function
  target-arm: Add virt machine secure property
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

1 files changed, 93 insertions, 5 deletions

diff --git a/hw/arm/boot.c b/hw/arm/boot.c
index e6a3c5bcfb..52ebd8be9b 100644
--- a/hw/arm/boot.c
+++ b/hw/arm/boot.c
@@ -457,6 +457,16 @@ static void do_cpu_reset(void *opaque)
                 env->thumb = info->entry & 1;
             }
         } else {
+            /* If we are booting Linux then we need to check whether we are
+             * booting into secure or non-secure state and adjust the state
+             * accordingly.  Out of reset, ARM is defined to be in secure state
+             * (SCR.NS = 0), we change that here if non-secure boot has been
+             * requested.
+             */
+            if (arm_feature(env, ARM_FEATURE_EL3) && !info->secure_boot) {
+                env->cp15.scr_el3 |= SCR_NS;
+            }
+
             if (CPU(cpu) == first_cpu) {
                 if (env->aarch64) {
                     env->pc = info->loader_start;
@@ -478,6 +488,55 @@ static void do_cpu_reset(void *opaque)
     }
 }
 
+/**
+ * load_image_to_fw_cfg() - Load an image file into an fw_cfg entry identified
+ *                          by key.
+ * @fw_cfg:         The firmware config instance to store the data in.
+ * @size_key:       The firmware config key to store the size of the loaded
+ *                  data under, with fw_cfg_add_i32().
+ * @data_key:       The firmware config key to store the loaded data under,
+ *                  with fw_cfg_add_bytes().
+ * @image_name:     The name of the image file to load. If it is NULL, the
+ *                  function returns without doing anything.
+ * @try_decompress: Whether the image should be decompressed (gunzipped) before
+ *                  adding it to fw_cfg. If decompression fails, the image is
+ *                  loaded as-is.
+ *
+ * In case of failure, the function prints an error message to stderr and the
+ * process exits with status 1.
+ */
+static void load_image_to_fw_cfg(FWCfgState *fw_cfg, uint16_t size_key,
+                                 uint16_t data_key, const char *image_name,
+                                 bool try_decompress)
+{
+    size_t size = -1;
+    uint8_t *data;
+
+    if (image_name == NULL) {
+        return;
+    }
+
+    if (try_decompress) {
+        size = load_image_gzipped_buffer(image_name,
+                                         LOAD_IMAGE_MAX_GUNZIP_BYTES, &data);
+    }
+
+    if (size == (size_t)-1) {
+        gchar *contents;
+        gsize length;
+
+        if (!g_file_get_contents(image_name, &contents, &length, NULL)) {
+            fprintf(stderr, "failed to load \"%s\"\n", image_name);
+            exit(1);
+        }
+        size = length;
+        data = (uint8_t *)contents;
+    }
+
+    fw_cfg_add_i32(fw_cfg, size_key, size);
+    fw_cfg_add_bytes(fw_cfg, data_key, data, size);
+}
+
 void arm_load_kernel(ARMCPU *cpu, struct arm_boot_info *info)
 {
     CPUState *cs;
@@ -500,19 +559,48 @@ void arm_load_kernel(ARMCPU *cpu, struct arm_boot_info *info)
     }
 
     /* Load the kernel.  */
-    if (!info->kernel_filename) {
+    if (!info->kernel_filename || info->firmware_loaded) {
 
         if (have_dtb(info)) {
-            /* If we have a device tree blob, but no kernel to supply it to,
-             * copy it to the base of RAM for a bootloader to pick up.
+            /* If we have a device tree blob, but no kernel to supply it to (or
+             * the kernel is supposed to be loaded by the bootloader), copy the
+             * DTB to the base of RAM for the bootloader to pick up.
              */
             if (load_dtb(info->loader_start, info, 0) < 0) {
                 exit(1);
             }
         }
 
-        /* If no kernel specified, do nothing; we will start from address 0
-         * (typically a boot ROM image) in the same way as hardware.
+        if (info->kernel_filename) {
+            FWCfgState *fw_cfg;
+            bool try_decompressing_kernel;
+
+            fw_cfg = fw_cfg_find();
+            try_decompressing_kernel = arm_feature(&cpu->env,
+                                                   ARM_FEATURE_AARCH64);
+
+            /* Expose the kernel, the command line, and the initrd in fw_cfg.
+             * We don't process them here at all, it's all left to the
+             * firmware.
+             */
+            load_image_to_fw_cfg(fw_cfg,
+                                 FW_CFG_KERNEL_SIZE, FW_CFG_KERNEL_DATA,
+                                 info->kernel_filename,
+                                 try_decompressing_kernel);
+            load_image_to_fw_cfg(fw_cfg,
+                                 FW_CFG_INITRD_SIZE, FW_CFG_INITRD_DATA,
+                                 info->initrd_filename, false);
+
+            if (info->kernel_cmdline) {
+                fw_cfg_add_i32(fw_cfg, FW_CFG_CMDLINE_SIZE,
+                               strlen(info->kernel_cmdline) + 1);
+                fw_cfg_add_string(fw_cfg, FW_CFG_CMDLINE_DATA,
+                                  info->kernel_cmdline);
+            }
+        }
+
+        /* We will start from address 0 (typically a boot ROM image) in the
+         * same way as hardware.
          */
         return;
     }