Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20210709' into staging

target-arm queue:
 * New machine type: stm32vldiscovery
 * hw/intc/arm_gicv3_cpuif: Fix virtual irq number check in icv_[dir|eoir]_write
 * hw/gpio/pl061: Honour Luminary PL061 PUR and PDR registers
 * virt: Fix implementation of GPIO-based powerdown/shutdown mechanism
 * Correct the encoding of MDCCSR_EL0 and DBGDSCRint
 * hw/intc: Improve formatting of MEMTX_ERROR guest error message

# gpg: Signature made Fri 09 Jul 2021 17:09:10 BST
# gpg:                using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg:                issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg:                 aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg:                 aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83  15CF 3C25 25ED 1436 0CDE

* remotes/pmaydell/tags/pull-target-arm-20210709:
  hw/intc: Improve formatting of MEMTX_ERROR guest error message
  target/arm: Correct the encoding of MDCCSR_EL0 and DBGDSCRint
  hw/arm/stellaris: Expand comment about handling of OLED chipselect
  hw/gpio/pl061: Document a shortcoming in our implementation
  hw/gpio/pl061: Convert to 3-phase reset and assert GPIO lines correctly on reset
  hw/arm/virt: Make PL061 GPIO lines pulled low, not high
  hw/gpio/pl061: Make pullup/pulldown of outputs configurable
  hw/gpio/pl061: Honour Luminary PL061 PUR and PDR registers
  hw/gpio/pl061: Document the interface of this device
  hw/gpio/pl061: Add tracepoints for register read and write
  hw/gpio/pl061: Clean up read/write offset handling logic
  hw/gpio/pl061: Convert DPRINTF to tracepoints
  hw/intc/arm_gicv3_cpuif: Fix virtual irq number check in icv_[dir|eoir]_write
  tests/boot-serial-test: Add STM32VLDISCOVERY board testcase
  docs/system: arm: Add stm32 boards description
  stm32vldiscovery: Add the STM32VLDISCOVERY Machine
  stm32f100: Add the stm32f100 SoC

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

1 files changed, 182 insertions, 0 deletions

diff --git a/hw/arm/stm32f100_soc.c b/hw/arm/stm32f100_soc.c
new file mode 100644
index 0000000000..0c4a5c6645
--- /dev/null
+++ b/hw/arm/stm32f100_soc.c
@@ -0,0 +1,182 @@
+/*
+ * STM32F100 SoC
+ *
+ * Copyright (c) 2021 Alexandre Iooss <erdnaxe@crans.org>
+ * Copyright (c) 2014 Alistair Francis <alistair@alistair23.me>
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "qemu/osdep.h"
+#include "qapi/error.h"
+#include "qemu/module.h"
+#include "hw/arm/boot.h"
+#include "exec/address-spaces.h"
+#include "hw/arm/stm32f100_soc.h"
+#include "hw/qdev-properties.h"
+#include "hw/misc/unimp.h"
+#include "sysemu/sysemu.h"
+
+/* stm32f100_soc implementation is derived from stm32f205_soc */
+
+static const uint32_t usart_addr[STM_NUM_USARTS] = { 0x40013800, 0x40004400,
+    0x40004800 };
+static const uint32_t spi_addr[STM_NUM_SPIS] = { 0x40013000, 0x40003800 };
+
+static const int usart_irq[STM_NUM_USARTS] = {37, 38, 39};
+static const int spi_irq[STM_NUM_SPIS] = {35, 36};
+
+static void stm32f100_soc_initfn(Object *obj)
+{
+    STM32F100State *s = STM32F100_SOC(obj);
+    int i;
+
+    object_initialize_child(obj, "armv7m", &s->armv7m, TYPE_ARMV7M);
+
+    for (i = 0; i < STM_NUM_USARTS; i++) {
+        object_initialize_child(obj, "usart[*]", &s->usart[i],
+                                TYPE_STM32F2XX_USART);
+    }
+
+    for (i = 0; i < STM_NUM_SPIS; i++) {
+        object_initialize_child(obj, "spi[*]", &s->spi[i], TYPE_STM32F2XX_SPI);
+    }
+}
+
+static void stm32f100_soc_realize(DeviceState *dev_soc, Error **errp)
+{
+    STM32F100State *s = STM32F100_SOC(dev_soc);
+    DeviceState *dev, *armv7m;
+    SysBusDevice *busdev;
+    int i;
+
+    MemoryRegion *system_memory = get_system_memory();
+    MemoryRegion *sram = g_new(MemoryRegion, 1);
+    MemoryRegion *flash = g_new(MemoryRegion, 1);
+    MemoryRegion *flash_alias = g_new(MemoryRegion, 1);
+
+    /*
+     * Init flash region
+     * Flash starts at 0x08000000 and then is aliased to boot memory at 0x0
+     */
+    memory_region_init_rom(flash, OBJECT(dev_soc), "STM32F100.flash",
+                           FLASH_SIZE, &error_fatal);
+    memory_region_init_alias(flash_alias, OBJECT(dev_soc),
+                             "STM32F100.flash.alias", flash, 0, FLASH_SIZE);
+    memory_region_add_subregion(system_memory, FLASH_BASE_ADDRESS, flash);
+    memory_region_add_subregion(system_memory, 0, flash_alias);
+
+    /* Init SRAM region */
+    memory_region_init_ram(sram, NULL, "STM32F100.sram", SRAM_SIZE,
+                           &error_fatal);
+    memory_region_add_subregion(system_memory, SRAM_BASE_ADDRESS, sram);
+
+    /* Init ARMv7m */
+    armv7m = DEVICE(&s->armv7m);
+    qdev_prop_set_uint32(armv7m, "num-irq", 61);
+    qdev_prop_set_string(armv7m, "cpu-type", s->cpu_type);
+    qdev_prop_set_bit(armv7m, "enable-bitband", true);
+    object_property_set_link(OBJECT(&s->armv7m), "memory",
+                             OBJECT(get_system_memory()), &error_abort);
+    if (!sysbus_realize(SYS_BUS_DEVICE(&s->armv7m), errp)) {
+        return;
+    }
+
+    /* Attach UART (uses USART registers) and USART controllers */
+    for (i = 0; i < STM_NUM_USARTS; i++) {
+        dev = DEVICE(&(s->usart[i]));
+        qdev_prop_set_chr(dev, "chardev", serial_hd(i));
+        if (!sysbus_realize(SYS_BUS_DEVICE(&s->usart[i]), errp)) {
+            return;
+        }
+        busdev = SYS_BUS_DEVICE(dev);
+        sysbus_mmio_map(busdev, 0, usart_addr[i]);
+        sysbus_connect_irq(busdev, 0, qdev_get_gpio_in(armv7m, usart_irq[i]));
+    }
+
+    /* SPI 1 and 2 */
+    for (i = 0; i < STM_NUM_SPIS; i++) {
+        dev = DEVICE(&(s->spi[i]));
+        if (!sysbus_realize(SYS_BUS_DEVICE(&s->spi[i]), errp)) {
+            return;
+        }
+        busdev = SYS_BUS_DEVICE(dev);
+        sysbus_mmio_map(busdev, 0, spi_addr[i]);
+        sysbus_connect_irq(busdev, 0, qdev_get_gpio_in(armv7m, spi_irq[i]));
+    }
+
+    create_unimplemented_device("timer[2]",  0x40000000, 0x400);
+    create_unimplemented_device("timer[3]",  0x40000400, 0x400);
+    create_unimplemented_device("timer[4]",  0x40000800, 0x400);
+    create_unimplemented_device("timer[6]",  0x40001000, 0x400);
+    create_unimplemented_device("timer[7]",  0x40001400, 0x400);
+    create_unimplemented_device("RTC",       0x40002800, 0x400);
+    create_unimplemented_device("WWDG",      0x40002C00, 0x400);
+    create_unimplemented_device("IWDG",      0x40003000, 0x400);
+    create_unimplemented_device("I2C1",      0x40005400, 0x400);
+    create_unimplemented_device("I2C2",      0x40005800, 0x400);
+    create_unimplemented_device("BKP",       0x40006C00, 0x400);
+    create_unimplemented_device("PWR",       0x40007000, 0x400);
+    create_unimplemented_device("DAC",       0x40007400, 0x400);
+    create_unimplemented_device("CEC",       0x40007800, 0x400);
+    create_unimplemented_device("AFIO",      0x40010000, 0x400);
+    create_unimplemented_device("EXTI",      0x40010400, 0x400);
+    create_unimplemented_device("GPIOA",     0x40010800, 0x400);
+    create_unimplemented_device("GPIOB",     0x40010C00, 0x400);
+    create_unimplemented_device("GPIOC",     0x40011000, 0x400);
+    create_unimplemented_device("GPIOD",     0x40011400, 0x400);
+    create_unimplemented_device("GPIOE",     0x40011800, 0x400);
+    create_unimplemented_device("ADC1",      0x40012400, 0x400);
+    create_unimplemented_device("timer[1]",  0x40012C00, 0x400);
+    create_unimplemented_device("timer[15]", 0x40014000, 0x400);
+    create_unimplemented_device("timer[16]", 0x40014400, 0x400);
+    create_unimplemented_device("timer[17]", 0x40014800, 0x400);
+    create_unimplemented_device("DMA",       0x40020000, 0x400);
+    create_unimplemented_device("RCC",       0x40021000, 0x400);
+    create_unimplemented_device("Flash Int", 0x40022000, 0x400);
+    create_unimplemented_device("CRC",       0x40023000, 0x400);
+}
+
+static Property stm32f100_soc_properties[] = {
+    DEFINE_PROP_STRING("cpu-type", STM32F100State, cpu_type),
+    DEFINE_PROP_END_OF_LIST(),
+};
+
+static void stm32f100_soc_class_init(ObjectClass *klass, void *data)
+{
+    DeviceClass *dc = DEVICE_CLASS(klass);
+
+    dc->realize = stm32f100_soc_realize;
+    device_class_set_props(dc, stm32f100_soc_properties);
+}
+
+static const TypeInfo stm32f100_soc_info = {
+    .name          = TYPE_STM32F100_SOC,
+    .parent        = TYPE_SYS_BUS_DEVICE,
+    .instance_size = sizeof(STM32F100State),
+    .instance_init = stm32f100_soc_initfn,
+    .class_init    = stm32f100_soc_class_init,
+};
+
+static void stm32f100_soc_types(void)
+{
+    type_register_static(&stm32f100_soc_info);
+}
+
+type_init(stm32f100_soc_types)