hw/arm: Remove deprecated akita, borzoi, spitz, terrier, tosa boards

The Sharp XScale-based PDA board models akita, borzoi, spitz,
terrier, and tosa were all deprecated in 9.0, so our deprecation
cycle permits removing them for the 9.2 release.

Remove the source files for the board models themselves, and their
documentation. There were no tests for these boards.

We will move the text describing the dropped boards from
deprecated.rst to removed-features.rst when we've cleaned up all the
boards it lists.  Device models used only by removed board models
will be removed in separate commits.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240903160751.4100218-2-peter.maydell@linaro.org

1 files changed, 0 insertions, 327 deletions

diff --git a/hw/arm/tosa.c b/hw/arm/tosa.c
deleted file mode 100644
index 5891f6064f..0000000000
--- a/hw/arm/tosa.c
+++ /dev/null
@@ -1,327 +0,0 @@
-/* vim:set shiftwidth=4 ts=4 et: */
-/*
- * PXA255 Sharp Zaurus SL-6000 PDA platform
- *
- * Copyright (c) 2008 Dmitry Baryshkov
- *
- * Code based on spitz platform by Andrzej Zaborowski <balrog@zabor.org>
- * This code is licensed under the GNU GPL v2.
- *
- * Contributions after 2012-01-13 are licensed under the terms of the
- * GNU GPL, version 2 or (at your option) any later version.
- */
-
-#include "qemu/osdep.h"
-#include "qapi/error.h"
-#include "sysemu/runstate.h"
-#include "hw/arm/pxa.h"
-#include "hw/arm/boot.h"
-#include "hw/arm/sharpsl.h"
-#include "hw/pcmcia.h"
-#include "hw/boards.h"
-#include "hw/display/tc6393xb.h"
-#include "hw/i2c/i2c.h"
-#include "hw/irq.h"
-#include "hw/ssi/ssi.h"
-#include "hw/sysbus.h"
-#include "hw/misc/led.h"
-#include "exec/address-spaces.h"
-#include "qom/object.h"
-
-#define TOSA_RAM 0x04000000
-#define TOSA_ROM 0x00800000
-
-#define TOSA_GPIO_USB_IN                (5)
-#define TOSA_GPIO_nSD_DETECT            (9)
-#define TOSA_GPIO_ON_RESET              (19)
-#define TOSA_GPIO_CF_IRQ                (21)    /* CF slot0 Ready */
-#define TOSA_GPIO_CF_CD                 (13)
-#define TOSA_GPIO_TC6393XB_INT          (15)
-#define TOSA_GPIO_JC_CF_IRQ             (36)    /* CF slot1 Ready */
-
-#define TOSA_SCOOP_GPIO_BASE            1
-#define TOSA_GPIO_IR_POWERDWN           (TOSA_SCOOP_GPIO_BASE + 2)
-#define TOSA_GPIO_SD_WP                 (TOSA_SCOOP_GPIO_BASE + 3)
-#define TOSA_GPIO_PWR_ON                (TOSA_SCOOP_GPIO_BASE + 4)
-
-#define TOSA_SCOOP_JC_GPIO_BASE         1
-#define TOSA_GPIO_BT_LED                (TOSA_SCOOP_JC_GPIO_BASE + 0)
-#define TOSA_GPIO_NOTE_LED              (TOSA_SCOOP_JC_GPIO_BASE + 1)
-#define TOSA_GPIO_CHRG_ERR_LED          (TOSA_SCOOP_JC_GPIO_BASE + 2)
-#define TOSA_GPIO_TC6393XB_L3V_ON       (TOSA_SCOOP_JC_GPIO_BASE + 5)
-#define TOSA_GPIO_WLAN_LED              (TOSA_SCOOP_JC_GPIO_BASE + 7)
-
-#define DAC_BASE 0x4e
-#define DAC_CH1 0
-#define DAC_CH2 1
-
-static void tosa_microdrive_attach(PXA2xxState *cpu)
-{
-    PCMCIACardState *md;
-    DriveInfo *dinfo;
-
-    dinfo = drive_get(IF_IDE, 0, 0);
-    if (!dinfo || dinfo->media_cd)
-        return;
-    md = dscm1xxxx_init(dinfo);
-    pxa2xx_pcmcia_attach(cpu->pcmcia[0], md);
-}
-
-/*
- * Encapsulation of some GPIO line behaviour for the Tosa board
- *
- * QEMU interface:
- *  + named GPIO inputs "leds[0..3]": assert to light LEDs
- *  + named GPIO input "reset": when asserted, resets the system
- */
-
-#define TYPE_TOSA_MISC_GPIO "tosa-misc-gpio"
-OBJECT_DECLARE_SIMPLE_TYPE(TosaMiscGPIOState, TOSA_MISC_GPIO)
-
-struct TosaMiscGPIOState {
-    SysBusDevice parent_obj;
-};
-
-static void tosa_reset(void *opaque, int line, int level)
-{
-    if (level) {
-        qemu_system_reset_request(SHUTDOWN_CAUSE_GUEST_RESET);
-    }
-}
-
-static void tosa_misc_gpio_init(Object *obj)
-{
-    DeviceState *dev = DEVICE(obj);
-
-    qdev_init_gpio_in_named(dev, tosa_reset, "reset", 1);
-}
-
-static void tosa_gpio_setup(PXA2xxState *cpu,
-                DeviceState *scp0,
-                DeviceState *scp1,
-                TC6393xbState *tmio)
-{
-    DeviceState *misc_gpio;
-    LEDState *led[4];
-
-    misc_gpio = sysbus_create_simple(TYPE_TOSA_MISC_GPIO, -1, NULL);
-
-    /* MMC/SD host */
-    pxa2xx_mmci_handlers(cpu->mmc,
-                    qdev_get_gpio_in(scp0, TOSA_GPIO_SD_WP),
-                    qemu_irq_invert(qdev_get_gpio_in(cpu->gpio, TOSA_GPIO_nSD_DETECT)));
-
-    /* Handle reset */
-    qdev_connect_gpio_out(cpu->gpio, TOSA_GPIO_ON_RESET,
-                          qdev_get_gpio_in_named(misc_gpio, "reset", 0));
-
-    /* PCMCIA signals: card's IRQ and Card-Detect */
-    pxa2xx_pcmcia_set_irq_cb(cpu->pcmcia[0],
-                        qdev_get_gpio_in(cpu->gpio, TOSA_GPIO_CF_IRQ),
-                        qdev_get_gpio_in(cpu->gpio, TOSA_GPIO_CF_CD));
-
-    pxa2xx_pcmcia_set_irq_cb(cpu->pcmcia[1],
-                        qdev_get_gpio_in(cpu->gpio, TOSA_GPIO_JC_CF_IRQ),
-                        NULL);
-
-    led[0] = led_create_simple(OBJECT(misc_gpio), GPIO_POLARITY_ACTIVE_HIGH,
-                               LED_COLOR_BLUE, "bluetooth");
-    led[1] = led_create_simple(OBJECT(misc_gpio), GPIO_POLARITY_ACTIVE_HIGH,
-                               LED_COLOR_GREEN, "note");
-    led[2] = led_create_simple(OBJECT(misc_gpio), GPIO_POLARITY_ACTIVE_HIGH,
-                               LED_COLOR_AMBER, "charger-error");
-    led[3] = led_create_simple(OBJECT(misc_gpio), GPIO_POLARITY_ACTIVE_HIGH,
-                               LED_COLOR_GREEN, "wlan");
-
-    qdev_connect_gpio_out(scp1, TOSA_GPIO_BT_LED,
-                          qdev_get_gpio_in(DEVICE(led[0]), 0));
-    qdev_connect_gpio_out(scp1, TOSA_GPIO_NOTE_LED,
-                          qdev_get_gpio_in(DEVICE(led[1]), 0));
-    qdev_connect_gpio_out(scp1, TOSA_GPIO_CHRG_ERR_LED,
-                          qdev_get_gpio_in(DEVICE(led[2]), 0));
-    qdev_connect_gpio_out(scp1, TOSA_GPIO_WLAN_LED,
-                          qdev_get_gpio_in(DEVICE(led[3]), 0));
-
-    qdev_connect_gpio_out(scp1, TOSA_GPIO_TC6393XB_L3V_ON, tc6393xb_l3v_get(tmio));
-
-    /* UDC Vbus */
-    qemu_irq_raise(qdev_get_gpio_in(cpu->gpio, TOSA_GPIO_USB_IN));
-}
-
-static uint32_t tosa_ssp_tansfer(SSIPeripheral *dev, uint32_t value)
-{
-    fprintf(stderr, "TG: %u %02x\n", value >> 5, value & 0x1f);
-    return 0;
-}
-
-static void tosa_ssp_realize(SSIPeripheral *dev, Error **errp)
-{
-    /* Nothing to do.  */
-}
-
-#define TYPE_TOSA_DAC "tosa_dac"
-OBJECT_DECLARE_SIMPLE_TYPE(TosaDACState, TOSA_DAC)
-
-struct TosaDACState {
-    I2CSlave parent_obj;
-
-    int len;
-    char buf[3];
-};
-
-static int tosa_dac_send(I2CSlave *i2c, uint8_t data)
-{
-    TosaDACState *s = TOSA_DAC(i2c);
-
-    s->buf[s->len] = data;
-    if (s->len ++ > 2) {
-#ifdef VERBOSE
-        fprintf(stderr, "%s: message too long (%i bytes)\n", __func__, s->len);
-#endif
-        return 1;
-    }
-
-    if (s->len == 2) {
-        fprintf(stderr, "dac: channel %d value 0x%02x\n",
-                s->buf[0], s->buf[1]);
-    }
-
-    return 0;
-}
-
-static int tosa_dac_event(I2CSlave *i2c, enum i2c_event event)
-{
-    TosaDACState *s = TOSA_DAC(i2c);
-
-    s->len = 0;
-    switch (event) {
-    case I2C_START_SEND:
-        break;
-    case I2C_START_RECV:
-        printf("%s: recv not supported!!!\n", __func__);
-        break;
-    case I2C_FINISH:
-#ifdef VERBOSE
-        if (s->len < 2)
-            printf("%s: message too short (%i bytes)\n", __func__, s->len);
-        if (s->len > 2)
-            printf("%s: message too long\n", __func__);
-#endif
-        break;
-    default:
-        break;
-    }
-
-    return 0;
-}
-
-static uint8_t tosa_dac_recv(I2CSlave *s)
-{
-    printf("%s: recv not supported!!!\n", __func__);
-    return 0xff;
-}
-
-static void tosa_tg_init(PXA2xxState *cpu)
-{
-    I2CBus *bus = pxa2xx_i2c_bus(cpu->i2c[0]);
-    i2c_slave_create_simple(bus, TYPE_TOSA_DAC, DAC_BASE);
-    ssi_create_peripheral(cpu->ssp[1], "tosa-ssp");
-}
-
-
-static struct arm_boot_info tosa_binfo = {
-    .loader_start = PXA2XX_SDRAM_BASE,
-    .ram_size = 0x04000000,
-};
-
-static void tosa_init(MachineState *machine)
-{
-    MemoryRegion *address_space_mem = get_system_memory();
-    MemoryRegion *rom = g_new(MemoryRegion, 1);
-    PXA2xxState *mpu;
-    TC6393xbState *tmio;
-    DeviceState *scp0, *scp1;
-
-    mpu = pxa255_init(tosa_binfo.ram_size);
-
-    memory_region_init_rom(rom, NULL, "tosa.rom", TOSA_ROM, &error_fatal);
-    memory_region_add_subregion(address_space_mem, 0, rom);
-
-    tmio = tc6393xb_init(address_space_mem, 0x10000000,
-            qdev_get_gpio_in(mpu->gpio, TOSA_GPIO_TC6393XB_INT));
-
-    scp0 = sysbus_create_simple("scoop", 0x08800000, NULL);
-    scp1 = sysbus_create_simple("scoop", 0x14800040, NULL);
-
-    tosa_gpio_setup(mpu, scp0, scp1, tmio);
-
-    tosa_microdrive_attach(mpu);
-
-    tosa_tg_init(mpu);
-
-    tosa_binfo.board_id = 0x208;
-    arm_load_kernel(mpu->cpu, machine, &tosa_binfo);
-    sl_bootparam_write(SL_PXA_PARAM_BASE);
-}
-
-static void tosapda_machine_init(MachineClass *mc)
-{
-    mc->desc = "Sharp SL-6000 (Tosa) PDA (PXA255)";
-    mc->init = tosa_init;
-    mc->block_default_type = IF_IDE;
-    mc->ignore_memory_transaction_failures = true;
-    mc->deprecation_reason = "machine is old and unmaintained";
-}
-
-DEFINE_MACHINE("tosa", tosapda_machine_init)
-
-static void tosa_dac_class_init(ObjectClass *klass, void *data)
-{
-    I2CSlaveClass *k = I2C_SLAVE_CLASS(klass);
-
-    k->event = tosa_dac_event;
-    k->recv = tosa_dac_recv;
-    k->send = tosa_dac_send;
-}
-
-static const TypeInfo tosa_dac_info = {
-    .name          = TYPE_TOSA_DAC,
-    .parent        = TYPE_I2C_SLAVE,
-    .instance_size = sizeof(TosaDACState),
-    .class_init    = tosa_dac_class_init,
-};
-
-static void tosa_ssp_class_init(ObjectClass *klass, void *data)
-{
-    SSIPeripheralClass *k = SSI_PERIPHERAL_CLASS(klass);
-
-    k->realize = tosa_ssp_realize;
-    k->transfer = tosa_ssp_tansfer;
-}
-
-static const TypeInfo tosa_ssp_info = {
-    .name          = "tosa-ssp",
-    .parent        = TYPE_SSI_PERIPHERAL,
-    .instance_size = sizeof(SSIPeripheral),
-    .class_init    = tosa_ssp_class_init,
-};
-
-static const TypeInfo tosa_misc_gpio_info = {
-    .name          = TYPE_TOSA_MISC_GPIO,
-    .parent        = TYPE_SYS_BUS_DEVICE,
-    .instance_size = sizeof(TosaMiscGPIOState),
-    .instance_init = tosa_misc_gpio_init,
-    /*
-     * No class init required: device has no internal state so does not
-     * need to set up reset or vmstate, and has no realize method.
-     */
-};
-
-static void tosa_register_types(void)
-{
-    type_register_static(&tosa_dac_info);
-    type_register_static(&tosa_ssp_info);
-    type_register_static(&tosa_misc_gpio_info);
-}
-
-type_init(tosa_register_types)