Merge tag 'pull-target-arm-20241001' of https://git.linaro.org/people/pmaydell/qemu-arm into staging

target-arm queue:
 * MAINTAINERS: Update STM32L4x5 and B-L475E-IOT01A maintainers
 * hw/arm/xlnx: Connect secondary CGEM IRQs
 * m25p80: Add SFDP table for mt35xu01g flash
 * target/arm: Avoid target_ulong for physical address lookups
 * hw/ssi/xilinx_spips: Fix flash erase assert in dual parallel configuration
 * hw: fix memory leak in IRQState allocation
 * hw/sd/sdcard: Fix handling of disabled boot partitions
 * arm: Remove deprecated board models

# -----BEGIN PGP SIGNATURE-----
#
# iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAmb8JW8ZHHBldGVyLm1h
# eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3m85D/9W5E4BQd4mG0JPT+OcCRP/
# MQGXsU6fOm3mtYfehXMwnJf2POOK0t/IC5W1mOGmIV6R4ABv2il3cXvQznCpcKY3
# eRmMLn4tfI2bn8zJmkIMY5am7j7G3RJzktz8iQ3bstNwD3pYU46tr36iup7vU71b
# Z5Q3+uauBoUo/9rw5jgjjoZ9Z3Ay2RECsZc/vD6NIN0kh2TYgdpitR47J8jhS3ZX
# +laqimnRl5wQpe0TIYzpdFr82CXfT62WfQ/+6D6xftbTrV1gfLWesc7hHsgw7Sem
# ST+nX+0Wr0UfBvsNN4ldi4jB4FfMeUCPX4wBbkKaYyD7bYFnoiz8RPYCxrHlKqeL
# 9P7+LuA+h+odIcsCza9zUSpQIu4gGIuovmnjz6rbD8m6poV0OmU/Ncj4JC9hGJNi
# Y1utyFELsvpdQhHP1M2K0qEgO3q/fJyzgA5LXkeXLVozjJM6DX7deVdXjwcBWqeI
# McJwe/C1TZ/WQlssrWmx6+naA8sygrsbo98a7X+DVsZ0ka6ofZSKkr7aHd3+dia+
# a4KbiMX6ChqZxPbIB+m4GnOkCDefu098rXlOu4gkMdzyQT/sm7wmVzQ3YsW3jVqx
# DNG6Mrg6OVvevXQysdLkJIemnM9YeLxf0lEJ/NpkyGQ7LlmdBws+p1ooCvuvg2Ua
# CRFY1tuUfWrshpziF1cT4A==
# =q4iF
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 01 Oct 2024 17:38:07 BST
# gpg:                using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg:                issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg:                 aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg:                 aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# gpg:                 aka "Peter Maydell <peter@archaic.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83  15CF 3C25 25ED 1436 0CDE

* tag 'pull-target-arm-20241001' of https://git.linaro.org/people/pmaydell/qemu-arm: (54 commits)
  hw: Remove omap2 specific defines and enums
  hw/dma: Remove omap_dma4 device
  hw/misc/omap_clk: Remove OMAP2-specifics
  hw/misc: Remove omap_l4 device
  hw/display: Remove omap_dss
  hw/misc: Remove omap_tap device
  hw/ssi: Remove omap_mcspi
  hw/timer: Remove omap_synctimer
  hw/timer: Remove omap_gptimer
  hw/misc: Remove omap_gpmc
  hw/misc: Remove omap_sdrc device
  hw/sd: Remove omap2_mmc device
  hw/intc: Remove omap2-intc device
  hw/char: Remove omap2_uart
  hw/gpio: Remove TYPE_OMAP2_GPIO
  hw/arm: Remove omap2.c
  docs: Document removal of old Arm boards
  hw/usb: Remove MUSB USB host controller
  hw/usb: Remove tusb6010 USB controller
  hw/block: Remove OneNAND device
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

1 files changed, 0 insertions, 355 deletions

diff --git a/hw/arm/z2.c b/hw/arm/z2.c
deleted file mode 100644
index fc5672e7ab..0000000000
--- a/hw/arm/z2.c
+++ /dev/null
@@ -1,355 +0,0 @@
-/*
- * PXA270-based Zipit Z2 device
- *
- * Copyright (c) 2011 by Vasily Khoruzhick <anarsoul@gmail.com>
- *
- * Code is based on mainstone platform.
- *
- * This code is licensed under the GNU GPL v2.
- *
- * Contributions after 2012-01-13 are licensed under the terms of the
- * GNU GPL, version 2 or (at your option) any later version.
- */
-
-#include "qemu/osdep.h"
-#include "qemu/units.h"
-#include "hw/arm/pxa.h"
-#include "hw/arm/boot.h"
-#include "hw/i2c/i2c.h"
-#include "hw/irq.h"
-#include "hw/ssi/ssi.h"
-#include "migration/vmstate.h"
-#include "hw/boards.h"
-#include "hw/block/flash.h"
-#include "ui/console.h"
-#include "hw/audio/wm8750.h"
-#include "audio/audio.h"
-#include "exec/address-spaces.h"
-#include "qom/object.h"
-#include "qapi/error.h"
-#include "trace.h"
-
-static const struct keymap map[0x100] = {
-    [0 ... 0xff] = { -1, -1 },
-    [0x3b] = {0, 0}, /* Option = F1 */
-    [0xc8] = {0, 1}, /* Up */
-    [0xd0] = {0, 2}, /* Down */
-    [0xcb] = {0, 3}, /* Left */
-    [0xcd] = {0, 4}, /* Right */
-    [0xcf] = {0, 5}, /* End */
-    [0x0d] = {0, 6}, /* KPPLUS */
-    [0xc7] = {1, 0}, /* Home */
-    [0x10] = {1, 1}, /* Q */
-    [0x17] = {1, 2}, /* I */
-    [0x22] = {1, 3}, /* G */
-    [0x2d] = {1, 4}, /* X */
-    [0x1c] = {1, 5}, /* Enter */
-    [0x0c] = {1, 6}, /* KPMINUS */
-    [0xc9] = {2, 0}, /* PageUp */
-    [0x11] = {2, 1}, /* W */
-    [0x18] = {2, 2}, /* O */
-    [0x23] = {2, 3}, /* H */
-    [0x2e] = {2, 4}, /* C */
-    [0x38] = {2, 5}, /* LeftAlt */
-    [0xd1] = {3, 0}, /* PageDown */
-    [0x12] = {3, 1}, /* E */
-    [0x19] = {3, 2}, /* P */
-    [0x24] = {3, 3}, /* J */
-    [0x2f] = {3, 4}, /* V */
-    [0x2a] = {3, 5}, /* LeftShift */
-    [0x01] = {4, 0}, /* Esc */
-    [0x13] = {4, 1}, /* R */
-    [0x1e] = {4, 2}, /* A */
-    [0x25] = {4, 3}, /* K */
-    [0x30] = {4, 4}, /* B */
-    [0x1d] = {4, 5}, /* LeftCtrl */
-    [0x0f] = {5, 0}, /* Tab */
-    [0x14] = {5, 1}, /* T */
-    [0x1f] = {5, 2}, /* S */
-    [0x26] = {5, 3}, /* L */
-    [0x31] = {5, 4}, /* N */
-    [0x39] = {5, 5}, /* Space */
-    [0x3c] = {6, 0}, /* Stop = F2 */
-    [0x15] = {6, 1}, /* Y */
-    [0x20] = {6, 2}, /* D */
-    [0x0e] = {6, 3}, /* Backspace */
-    [0x32] = {6, 4}, /* M */
-    [0x33] = {6, 5}, /* Comma */
-    [0x3d] = {7, 0}, /* Play = F3 */
-    [0x16] = {7, 1}, /* U */
-    [0x21] = {7, 2}, /* F */
-    [0x2c] = {7, 3}, /* Z */
-    [0x27] = {7, 4}, /* Semicolon */
-    [0x34] = {7, 5}, /* Dot */
-};
-
-#define Z2_RAM_SIZE     0x02000000
-#define Z2_FLASH_BASE   0x00000000
-#define Z2_FLASH_SIZE   0x00800000
-
-static struct arm_boot_info z2_binfo = {
-    .loader_start   = PXA2XX_SDRAM_BASE,
-    .ram_size       = Z2_RAM_SIZE,
-};
-
-#define Z2_GPIO_SD_DETECT   96
-#define Z2_GPIO_AC_IN       0
-#define Z2_GPIO_KEY_ON      1
-#define Z2_GPIO_LCD_CS      88
-
-struct ZipitLCD {
-    SSIPeripheral ssidev;
-    int32_t selected;
-    int32_t enabled;
-    uint8_t buf[3];
-    uint32_t cur_reg;
-    int pos;
-};
-
-#define TYPE_ZIPIT_LCD "zipit-lcd"
-OBJECT_DECLARE_SIMPLE_TYPE(ZipitLCD, ZIPIT_LCD)
-
-static uint32_t zipit_lcd_transfer(SSIPeripheral *dev, uint32_t value)
-{
-    ZipitLCD *z = ZIPIT_LCD(dev);
-    uint16_t val;
-
-    trace_z2_lcd_reg_update(z->cur_reg, z->buf[0], z->buf[1], z->buf[2], value);
-    if (z->selected) {
-        z->buf[z->pos] = value & 0xff;
-        z->pos++;
-    }
-    if (z->pos == 3) {
-        switch (z->buf[0]) {
-        case 0x74:
-            z->cur_reg = z->buf[2];
-            break;
-        case 0x76:
-            val = z->buf[1] << 8 | z->buf[2];
-            if (z->cur_reg == 0x22 && val == 0x0000) {
-                z->enabled = 1;
-                trace_z2_lcd_enable_disable_result("enabled");
-            } else if (z->cur_reg == 0x10 && val == 0x0000) {
-                z->enabled = 0;
-                trace_z2_lcd_enable_disable_result("disabled");
-            }
-            break;
-        default:
-            break;
-        }
-        z->pos = 0;
-    }
-    return 0;
-}
-
-static void z2_lcd_cs(void *opaque, int line, int level)
-{
-    ZipitLCD *z2_lcd = opaque;
-    z2_lcd->selected = !level;
-}
-
-static void zipit_lcd_realize(SSIPeripheral *dev, Error **errp)
-{
-    ZipitLCD *z = ZIPIT_LCD(dev);
-    z->selected = 0;
-    z->enabled = 0;
-    z->pos = 0;
-}
-
-static const VMStateDescription vmstate_zipit_lcd_state = {
-    .name = "zipit-lcd",
-    .version_id = 2,
-    .minimum_version_id = 2,
-    .fields = (const VMStateField[]) {
-        VMSTATE_SSI_PERIPHERAL(ssidev, ZipitLCD),
-        VMSTATE_INT32(selected, ZipitLCD),
-        VMSTATE_INT32(enabled, ZipitLCD),
-        VMSTATE_BUFFER(buf, ZipitLCD),
-        VMSTATE_UINT32(cur_reg, ZipitLCD),
-        VMSTATE_INT32(pos, ZipitLCD),
-        VMSTATE_END_OF_LIST(),
-    }
-};
-
-static void zipit_lcd_class_init(ObjectClass *klass, void *data)
-{
-    DeviceClass *dc = DEVICE_CLASS(klass);
-    SSIPeripheralClass *k = SSI_PERIPHERAL_CLASS(klass);
-
-    k->realize = zipit_lcd_realize;
-    k->transfer = zipit_lcd_transfer;
-    dc->vmsd = &vmstate_zipit_lcd_state;
-}
-
-static const TypeInfo zipit_lcd_info = {
-    .name          = TYPE_ZIPIT_LCD,
-    .parent        = TYPE_SSI_PERIPHERAL,
-    .instance_size = sizeof(ZipitLCD),
-    .class_init    = zipit_lcd_class_init,
-};
-
-#define TYPE_AER915 "aer915"
-OBJECT_DECLARE_SIMPLE_TYPE(AER915State, AER915)
-
-struct AER915State {
-    I2CSlave parent_obj;
-
-    int len;
-    uint8_t buf[3];
-};
-
-static int aer915_send(I2CSlave *i2c, uint8_t data)
-{
-    AER915State *s = AER915(i2c);
-
-    s->buf[s->len] = data;
-    if (s->len++ > 2) {
-        trace_z2_aer915_send_too_long(s->len);
-        return 1;
-    }
-
-    if (s->len == 2) {
-        trace_z2_aer915_send(s->buf[0], s->buf[1]);
-    }
-
-    return 0;
-}
-
-static int aer915_event(I2CSlave *i2c, enum i2c_event event)
-{
-    AER915State *s = AER915(i2c);
-
-    trace_z2_aer915_event(s->len, event);
-    switch (event) {
-    case I2C_START_SEND:
-        s->len = 0;
-        break;
-    case I2C_START_RECV:
-        break;
-    case I2C_FINISH:
-        break;
-    default:
-        break;
-    }
-
-    return 0;
-}
-
-static uint8_t aer915_recv(I2CSlave *slave)
-{
-    AER915State *s = AER915(slave);
-    int retval = 0x00;
-
-    switch (s->buf[0]) {
-    /* Return hardcoded battery voltage,
-     * 0xf0 means ~4.1V
-     */
-    case 0x02:
-        retval = 0xf0;
-        break;
-    /* Return 0x00 for other regs,
-     * we don't know what they are for,
-     * anyway they return 0x00 on real hardware.
-     */
-    default:
-        break;
-    }
-
-    return retval;
-}
-
-static const VMStateDescription vmstate_aer915_state = {
-    .name = "aer915",
-    .version_id = 1,
-    .minimum_version_id = 1,
-    .fields = (const VMStateField[]) {
-        VMSTATE_INT32(len, AER915State),
-        VMSTATE_BUFFER(buf, AER915State),
-        VMSTATE_END_OF_LIST(),
-    }
-};
-
-static void aer915_class_init(ObjectClass *klass, void *data)
-{
-    DeviceClass *dc = DEVICE_CLASS(klass);
-    I2CSlaveClass *k = I2C_SLAVE_CLASS(klass);
-
-    k->event = aer915_event;
-    k->recv = aer915_recv;
-    k->send = aer915_send;
-    dc->vmsd = &vmstate_aer915_state;
-}
-
-static const TypeInfo aer915_info = {
-    .name          = TYPE_AER915,
-    .parent        = TYPE_I2C_SLAVE,
-    .instance_size = sizeof(AER915State),
-    .class_init    = aer915_class_init,
-};
-
-#define FLASH_SECTOR_SIZE   (64 * KiB)
-
-static void z2_init(MachineState *machine)
-{
-    PXA2xxState *mpu;
-    DriveInfo *dinfo;
-    void *z2_lcd;
-    I2CBus *bus;
-    DeviceState *wm;
-    I2CSlave *i2c_dev;
-
-    /* Setup CPU & memory */
-    mpu = pxa270_init(z2_binfo.ram_size, machine->cpu_type);
-
-    dinfo = drive_get(IF_PFLASH, 0, 0);
-    pflash_cfi01_register(Z2_FLASH_BASE, "z2.flash0", Z2_FLASH_SIZE,
-                          dinfo ? blk_by_legacy_dinfo(dinfo) : NULL,
-                          FLASH_SECTOR_SIZE, 4, 0, 0, 0, 0, 0);
-
-    /* setup keypad */
-    pxa27x_register_keypad(mpu->kp, map, 0x100);
-
-    /* MMC/SD host */
-    pxa2xx_mmci_handlers(mpu->mmc,
-        NULL,
-        qdev_get_gpio_in(mpu->gpio, Z2_GPIO_SD_DETECT));
-
-    type_register_static(&zipit_lcd_info);
-    type_register_static(&aer915_info);
-    z2_lcd = ssi_create_peripheral(mpu->ssp[1], TYPE_ZIPIT_LCD);
-    bus = pxa2xx_i2c_bus(mpu->i2c[0]);
-
-    i2c_slave_create_simple(bus, TYPE_AER915, 0x55);
-
-    i2c_dev = i2c_slave_new(TYPE_WM8750, 0x1b);
-    wm = DEVICE(i2c_dev);
-
-    if (machine->audiodev) {
-        qdev_prop_set_string(wm, "audiodev", machine->audiodev);
-    }
-    i2c_slave_realize_and_unref(i2c_dev, bus, &error_abort);
-
-    mpu->i2s->opaque = wm;
-    mpu->i2s->codec_out = wm8750_dac_dat;
-    mpu->i2s->codec_in = wm8750_adc_dat;
-    wm8750_data_req_set(wm, mpu->i2s->data_req, mpu->i2s);
-
-    qdev_connect_gpio_out(mpu->gpio, Z2_GPIO_LCD_CS,
-                          qemu_allocate_irq(z2_lcd_cs, z2_lcd, 0));
-
-    z2_binfo.board_id = 0x6dd;
-    arm_load_kernel(mpu->cpu, machine, &z2_binfo);
-}
-
-static void z2_machine_init(MachineClass *mc)
-{
-    mc->desc = "Zipit Z2 (PXA27x)";
-    mc->init = z2_init;
-    mc->ignore_memory_transaction_failures = true;
-    mc->default_cpu_type = ARM_CPU_TYPE_NAME("pxa270-c5");
-    mc->deprecation_reason = "machine is old and unmaintained";
-
-    machine_add_audiodev_property(mc);
-}
-
-DEFINE_MACHINE("z2", z2_machine_init)