Merge remote-tracking branch 'remotes/philmd-gitlab/tags/avr-port-20200711' into staging

8bit AVR port from Michael Rolnik.

Michael started to work on the AVR port few years ago [*] and kept
improving the code over various series.

List of people who help him (in chronological order):
- Richard Henderson
- Sarah Harris and Edward Robbins
- Philippe Mathieu-Daudé and Aleksandar Markovic
- Pavel Dovgalyuk
- Thomas Huth

[*] The oldest contribution I could find on the list is from 2016:
https://lists.nongnu.org/archive/html/qemu-devel/2016-06/msg02985.html

Tests included:

$ avocado --show=app run -t arch:avr tests/acceptance/
Fetching asset from tests/acceptance/machine_avr6.py:AVR6Machine.test_freertos
 (1/1) tests/acceptance/machine_avr6.py:AVR6Machine.test_freertos: PASS (2.13 s)
RESULTS    : PASS 1 | ERROR 0 | FAIL 0 | SKIP 0 | WARN 0 | INTERRUPT 0 | CANCEL 0
JOB TIME   : 2.35 s

$ make check-qtest-avr
  TEST    check-qtest-avr: tests/qtest/boot-serial-test
  TEST    check-qtest-avr: tests/qtest/cdrom-test
  TEST    check-qtest-avr: tests/qtest/device-introspect-test
  TEST    check-qtest-avr: tests/qtest/machine-none-test
  TEST    check-qtest-avr: tests/qtest/qmp-test
  TEST    check-qtest-avr: tests/qtest/qmp-cmd-test
  TEST    check-qtest-avr: tests/qtest/qom-test
  TEST    check-qtest-avr: tests/qtest/test-hmp
  TEST    check-qtest-avr: tests/qtest/qos-test

CI results:
. https://cirrus-ci.com/build/5697049146425344
. https://gitlab.com/philmd/qemu/-/pipelines/165328058
. https://travis-ci.org/github/philmd/qemu/builds/705817933
. https://app.shippable.com/github/philmd/qemu/runs/822/summary/console

# gpg: Signature made Sat 11 Jul 2020 10:03:11 BST
# gpg:                using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full]
# Primary key fingerprint: FAAB E75E 1291 7221 DCFD  6BB2 E3E3 2C2C DEAD C0DE

* remotes/philmd-gitlab/tags/avr-port-20200711: (32 commits)
  target/avr/disas: Fix store instructions display order
  target/avr/cpu: Fix $PC displayed address
  target/avr/cpu: Drop tlb_flush() in avr_cpu_reset()
  target/avr: Add section into QEMU documentation
  tests/acceptance: Test the Arduino MEGA2560 board
  tests/boot-serial: Test some Arduino boards (AVR based)
  hw/avr: Add limited support for some Arduino boards
  hw/avr: Add some ATmega microcontrollers
  hw/avr: Add support for loading ELF/raw binaries
  hw/misc: avr: Add limited support for power reduction device
  hw/timer: avr: Add limited support for 16-bit timer peripheral
  hw/char: avr: Add limited support for USART peripheral
  tests/machine-none: Add AVR support
  target/avr: Register AVR support with the rest of QEMU
  target/avr: Add support for disassembling via option '-d in_asm'
  target/avr: Initialize TCG register variables
  target/avr: Add instruction translation - CPU main translation function
  target/avr: Add instruction translation - MCU Control Instructions
  target/avr: Add instruction translation - Bit and Bit-test Instructions
  target/avr: Add instruction translation - Data Transfer Instructions
  ...

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

1 files changed, 149 insertions, 0 deletions

diff --git a/hw/avr/arduino.c b/hw/avr/arduino.c
new file mode 100644
index 0000000000..65093ab6fd
--- /dev/null
+++ b/hw/avr/arduino.c
@@ -0,0 +1,149 @@
+/*
+ * QEMU Arduino boards
+ *
+ * Copyright (c) 2019-2020 Philippe Mathieu-Daudé
+ *
+ * This work is licensed under the terms of the GNU GPLv2 or later.
+ * See the COPYING file in the top-level directory.
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ */
+
+/* TODO: Implement the use of EXTRAM */
+
+#include "qemu/osdep.h"
+#include "qapi/error.h"
+#include "hw/boards.h"
+#include "atmega.h"
+#include "boot.h"
+
+typedef struct ArduinoMachineState {
+    /*< private >*/
+    MachineState parent_obj;
+    /*< public >*/
+    AtmegaMcuState mcu;
+} ArduinoMachineState;
+
+typedef struct ArduinoMachineClass {
+    /*< private >*/
+    MachineClass parent_class;
+    /*< public >*/
+    const char *mcu_type;
+    uint64_t xtal_hz;
+} ArduinoMachineClass;
+
+#define TYPE_ARDUINO_MACHINE \
+        MACHINE_TYPE_NAME("arduino")
+#define ARDUINO_MACHINE(obj) \
+        OBJECT_CHECK(ArduinoMachineState, (obj), TYPE_ARDUINO_MACHINE)
+#define ARDUINO_MACHINE_CLASS(klass) \
+        OBJECT_CLASS_CHECK(ArduinoMachineClass, (klass), TYPE_ARDUINO_MACHINE)
+#define ARDUINO_MACHINE_GET_CLASS(obj) \
+        OBJECT_GET_CLASS(ArduinoMachineClass, (obj), TYPE_ARDUINO_MACHINE)
+
+static void arduino_machine_init(MachineState *machine)
+{
+    ArduinoMachineClass *amc = ARDUINO_MACHINE_GET_CLASS(machine);
+    ArduinoMachineState *ams = ARDUINO_MACHINE(machine);
+
+    object_initialize_child(OBJECT(machine), "mcu", &ams->mcu, amc->mcu_type);
+    object_property_set_uint(OBJECT(&ams->mcu), "xtal-frequency-hz",
+                             amc->xtal_hz, &error_abort);
+    sysbus_realize(SYS_BUS_DEVICE(&ams->mcu), &error_abort);
+
+    if (machine->firmware) {
+        if (!avr_load_firmware(&ams->mcu.cpu, machine,
+                               &ams->mcu.flash, machine->firmware)) {
+            exit(1);
+        }
+    }
+}
+
+static void arduino_machine_class_init(ObjectClass *oc, void *data)
+{
+    MachineClass *mc = MACHINE_CLASS(oc);
+
+    mc->init = arduino_machine_init;
+    mc->default_cpus = 1;
+    mc->min_cpus = mc->default_cpus;
+    mc->max_cpus = mc->default_cpus;
+    mc->no_floppy = 1;
+    mc->no_cdrom = 1;
+    mc->no_parallel = 1;
+}
+
+static void arduino_duemilanove_class_init(ObjectClass *oc, void *data)
+{
+    MachineClass *mc = MACHINE_CLASS(oc);
+    ArduinoMachineClass *amc = ARDUINO_MACHINE_CLASS(oc);
+
+    /* https://www.arduino.cc/en/Main/ArduinoBoardDuemilanove */
+    mc->desc        = "Arduino Duemilanove (ATmega168)",
+    mc->alias       = "2009";
+    amc->mcu_type   = TYPE_ATMEGA168_MCU;
+    amc->xtal_hz    = 16 * 1000 * 1000;
+};
+
+static void arduino_uno_class_init(ObjectClass *oc, void *data)
+{
+    MachineClass *mc = MACHINE_CLASS(oc);
+    ArduinoMachineClass *amc = ARDUINO_MACHINE_CLASS(oc);
+
+    /* https://store.arduino.cc/arduino-uno-rev3 */
+    mc->desc        = "Arduino UNO (ATmega328P)";
+    mc->alias       = "uno";
+    amc->mcu_type   = TYPE_ATMEGA328_MCU;
+    amc->xtal_hz    = 16 * 1000 * 1000;
+};
+
+static void arduino_mega_class_init(ObjectClass *oc, void *data)
+{
+    MachineClass *mc = MACHINE_CLASS(oc);
+    ArduinoMachineClass *amc = ARDUINO_MACHINE_CLASS(oc);
+
+    /* https://www.arduino.cc/en/Main/ArduinoBoardMega */
+    mc->desc        = "Arduino Mega (ATmega1280)";
+    mc->alias       = "mega";
+    amc->mcu_type   = TYPE_ATMEGA1280_MCU;
+    amc->xtal_hz    = 16 * 1000 * 1000;
+};
+
+static void arduino_mega2560_class_init(ObjectClass *oc, void *data)
+{
+    MachineClass *mc = MACHINE_CLASS(oc);
+    ArduinoMachineClass *amc = ARDUINO_MACHINE_CLASS(oc);
+
+    /* https://store.arduino.cc/arduino-mega-2560-rev3 */
+    mc->desc        = "Arduino Mega 2560 (ATmega2560)";
+    mc->alias       = "mega2560";
+    amc->mcu_type   = TYPE_ATMEGA2560_MCU;
+    amc->xtal_hz    = 16 * 1000 * 1000; /* CSTCE16M0V53-R0 */
+};
+
+static const TypeInfo arduino_machine_types[] = {
+    {
+        .name          = MACHINE_TYPE_NAME("arduino-duemilanove"),
+        .parent        = TYPE_ARDUINO_MACHINE,
+        .class_init    = arduino_duemilanove_class_init,
+    }, {
+        .name          = MACHINE_TYPE_NAME("arduino-uno"),
+        .parent        = TYPE_ARDUINO_MACHINE,
+        .class_init    = arduino_uno_class_init,
+    }, {
+        .name          = MACHINE_TYPE_NAME("arduino-mega"),
+        .parent        = TYPE_ARDUINO_MACHINE,
+        .class_init    = arduino_mega_class_init,
+    }, {
+        .name          = MACHINE_TYPE_NAME("arduino-mega-2560-v3"),
+        .parent        = TYPE_ARDUINO_MACHINE,
+        .class_init    = arduino_mega2560_class_init,
+    }, {
+        .name           = TYPE_ARDUINO_MACHINE,
+        .parent         = TYPE_MACHINE,
+        .instance_size  = sizeof(ArduinoMachineState),
+        .class_size     = sizeof(ArduinoMachineClass),
+        .class_init     = arduino_machine_class_init,
+        .abstract       = true,
+    }
+};
+
+DEFINE_TYPES(arduino_machine_types)