Merge remote-tracking branch 'remotes/alistair23/tags/pull-riscv-to-apply-20211007' into staging

Third RISC-V PR for QEMU 6.2

 - Add Zb[abcs] instruction support
 - Remove RVB support
 - Bug fix of setting mstatus_hs.[SD|FS] bits
 - Mark some UART devices as 'input'
 - QOMify PolarFire MMUART
 - Fixes for sifive PDMA
 - Mark shakti_c as not user creatable

# gpg: Signature made Wed 06 Oct 2021 11:42:53 PM PDT
# gpg:                using RSA key F6C4AC46D4934868D3B8CE8F21E10D29DF977054
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [full]

* remotes/alistair23/tags/pull-riscv-to-apply-20211007: (26 commits)
  hw/riscv: shakti_c: Mark as not user creatable
  hw/dma: sifive_pdma: Don't run DMA when channel is disclaimed
  hw/dma: sifive_pdma: Fix Control.claim bit detection
  hw/char/mchp_pfsoc_mmuart: QOM'ify PolarFire MMUART
  hw/char/mchp_pfsoc_mmuart: Use a MemoryRegion container
  hw/char/mchp_pfsoc_mmuart: Simplify MCHP_PFSOC_MMUART_REG definition
  hw/char: sifive_uart: Register device in 'input' category
  hw/char: shakti_uart: Register device in 'input' category
  hw/char: ibex_uart: Register device in 'input' category
  target/riscv: Set mstatus_hs.[SD|FS] bits if Clean and V=1 in mark_fs_dirty()
  disas/riscv: Add Zb[abcs] instructions
  target/riscv: Remove RVB (replaced by Zb[abcs])
  target/riscv: Add zext.h instructions to Zbb, removing pack/packu/packh
  target/riscv: Add rev8 instruction, removing grev/grevi
  target/riscv: Add a REQUIRE_32BIT macro
  target/riscv: Add orc.b instruction for Zbb, removing gorc/gorci
  target/riscv: Reassign instructions to the Zbb-extension
  target/riscv: Add instructions of the Zbc-extension
  target/riscv: Reassign instructions to the Zbs-extension
  target/riscv: Remove shift-one instructions (proposed Zbo in pre-0.93 draft-B)
  ...

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>

1 files changed, 97 insertions, 19 deletions

diff --git a/hw/char/mchp_pfsoc_mmuart.c b/hw/char/mchp_pfsoc_mmuart.c
index 2facf85c2d..22f3e78eb9 100644
--- a/hw/char/mchp_pfsoc_mmuart.c
+++ b/hw/char/mchp_pfsoc_mmuart.c
@@ -22,20 +22,25 @@
 
 #include "qemu/osdep.h"
 #include "qemu/log.h"
-#include "chardev/char.h"
+#include "qapi/error.h"
+#include "migration/vmstate.h"
 #include "hw/char/mchp_pfsoc_mmuart.h"
+#include "hw/qdev-properties.h"
+
+#define REGS_OFFSET 0x20
 
 static uint64_t mchp_pfsoc_mmuart_read(void *opaque, hwaddr addr, unsigned size)
 {
     MchpPfSoCMMUartState *s = opaque;
 
-    if (addr >= MCHP_PFSOC_MMUART_REG_SIZE) {
+    addr >>= 2;
+    if (addr >= MCHP_PFSOC_MMUART_REG_COUNT) {
         qemu_log_mask(LOG_GUEST_ERROR, "%s: read: addr=0x%" HWADDR_PRIx "\n",
-                      __func__, addr);
+                      __func__, addr << 2);
         return 0;
     }
 
-    return s->reg[addr / sizeof(uint32_t)];
+    return s->reg[addr];
 }
 
 static void mchp_pfsoc_mmuart_write(void *opaque, hwaddr addr,
@@ -44,13 +49,14 @@ static void mchp_pfsoc_mmuart_write(void *opaque, hwaddr addr,
     MchpPfSoCMMUartState *s = opaque;
     uint32_t val32 = (uint32_t)value;
 
-    if (addr >= MCHP_PFSOC_MMUART_REG_SIZE) {
+    addr >>= 2;
+    if (addr >= MCHP_PFSOC_MMUART_REG_COUNT) {
         qemu_log_mask(LOG_GUEST_ERROR, "%s: bad write: addr=0x%" HWADDR_PRIx
-                      " v=0x%x\n", __func__, addr, val32);
+                      " v=0x%x\n", __func__, addr << 2, val32);
         return;
     }
 
-    s->reg[addr / sizeof(uint32_t)] = val32;
+    s->reg[addr] = val32;
 }
 
 static const MemoryRegionOps mchp_pfsoc_mmuart_ops = {
@@ -63,23 +69,95 @@ static const MemoryRegionOps mchp_pfsoc_mmuart_ops = {
     },
 };
 
-MchpPfSoCMMUartState *mchp_pfsoc_mmuart_create(MemoryRegion *sysmem,
-    hwaddr base, qemu_irq irq, Chardev *chr)
+static void mchp_pfsoc_mmuart_reset(DeviceState *dev)
+{
+    MchpPfSoCMMUartState *s = MCHP_PFSOC_UART(dev);
+
+    memset(s->reg, 0, sizeof(s->reg));
+    device_cold_reset(DEVICE(&s->serial_mm));
+}
+
+static void mchp_pfsoc_mmuart_init(Object *obj)
+{
+    MchpPfSoCMMUartState *s = MCHP_PFSOC_UART(obj);
+
+    object_initialize_child(obj, "serial-mm", &s->serial_mm, TYPE_SERIAL_MM);
+    object_property_add_alias(obj, "chardev", OBJECT(&s->serial_mm), "chardev");
+}
+
+static void mchp_pfsoc_mmuart_realize(DeviceState *dev, Error **errp)
 {
-    MchpPfSoCMMUartState *s;
+    MchpPfSoCMMUartState *s = MCHP_PFSOC_UART(dev);
+
+    qdev_prop_set_uint8(DEVICE(&s->serial_mm), "regshift", 2);
+    qdev_prop_set_uint32(DEVICE(&s->serial_mm), "baudbase", 399193);
+    qdev_prop_set_uint8(DEVICE(&s->serial_mm), "endianness",
+                        DEVICE_LITTLE_ENDIAN);
+    if (!sysbus_realize(SYS_BUS_DEVICE(&s->serial_mm), errp)) {
+        return;
+    }
+
+    sysbus_pass_irq(SYS_BUS_DEVICE(dev), SYS_BUS_DEVICE(&s->serial_mm));
 
-    s = g_new0(MchpPfSoCMMUartState, 1);
+    memory_region_init(&s->container, OBJECT(s), "mchp.pfsoc.mmuart", 0x1000);
+    sysbus_init_mmio(SYS_BUS_DEVICE(dev), &s->container);
 
-    memory_region_init_io(&s->iomem, NULL, &mchp_pfsoc_mmuart_ops, s,
-                          "mchp.pfsoc.mmuart", 0x1000);
+    memory_region_add_subregion(&s->container, 0,
+                    sysbus_mmio_get_region(SYS_BUS_DEVICE(&s->serial_mm), 0));
+
+    memory_region_init_io(&s->iomem, OBJECT(s), &mchp_pfsoc_mmuart_ops, s,
+                          "mchp.pfsoc.mmuart.regs", 0x1000 - REGS_OFFSET);
+    memory_region_add_subregion(&s->container, REGS_OFFSET, &s->iomem);
+}
 
-    s->base = base;
-    s->irq = irq;
+static const VMStateDescription mchp_pfsoc_mmuart_vmstate = {
+    .name = "mchp.pfsoc.uart",
+    .version_id = 0,
+    .minimum_version_id = 0,
+    .fields = (VMStateField[]) {
+        VMSTATE_UINT32_ARRAY(reg, MchpPfSoCMMUartState,
+                             MCHP_PFSOC_MMUART_REG_COUNT),
+        VMSTATE_END_OF_LIST()
+    }
+};
+
+static void mchp_pfsoc_mmuart_class_init(ObjectClass *oc, void *data)
+{
+    DeviceClass *dc = DEVICE_CLASS(oc);
+
+    dc->realize = mchp_pfsoc_mmuart_realize;
+    dc->reset = mchp_pfsoc_mmuart_reset;
+    dc->vmsd = &mchp_pfsoc_mmuart_vmstate;
+    set_bit(DEVICE_CATEGORY_INPUT, dc->categories);
+}
+
+static const TypeInfo mchp_pfsoc_mmuart_info = {
+    .name          = TYPE_MCHP_PFSOC_UART,
+    .parent        = TYPE_SYS_BUS_DEVICE,
+    .instance_size = sizeof(MchpPfSoCMMUartState),
+    .instance_init = mchp_pfsoc_mmuart_init,
+    .class_init    = mchp_pfsoc_mmuart_class_init,
+};
+
+static void mchp_pfsoc_mmuart_register_types(void)
+{
+    type_register_static(&mchp_pfsoc_mmuart_info);
+}
+
+type_init(mchp_pfsoc_mmuart_register_types)
+
+MchpPfSoCMMUartState *mchp_pfsoc_mmuart_create(MemoryRegion *sysmem,
+                                               hwaddr base,
+                                               qemu_irq irq, Chardev *chr)
+{
+    DeviceState *dev = qdev_new(TYPE_MCHP_PFSOC_UART);
+    SysBusDevice *sbd = SYS_BUS_DEVICE(dev);
 
-    s->serial = serial_mm_init(sysmem, base, 2, irq, 399193, chr,
-                               DEVICE_LITTLE_ENDIAN);
+    qdev_prop_set_chr(dev, "chardev", chr);
+    sysbus_realize(sbd, &error_fatal);
 
-    memory_region_add_subregion(sysmem, base + 0x20, &s->iomem);
+    memory_region_add_subregion(sysmem, base, sysbus_mmio_get_region(sbd, 0));
+    sysbus_connect_irq(sbd, 0, irq);
 
-    return s;
+    return MCHP_PFSOC_UART(dev);
 }