hw: move target-independent files to subdirectories

This patch tackles all files that are compiled once, moving
them to subdirectories of hw/.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

1 files changed, 533 insertions, 0 deletions

diff --git a/hw/display/pl110.c b/hw/display/pl110.c
new file mode 100644
index 0000000000..fbef675f9c
--- /dev/null
+++ b/hw/display/pl110.c
@@ -0,0 +1,533 @@
+/*
+ * Arm PrimeCell PL110 Color LCD Controller
+ *
+ * Copyright (c) 2005-2009 CodeSourcery.
+ * Written by Paul Brook
+ *
+ * This code is licensed under the GNU LGPL
+ */
+
+#include "hw/sysbus.h"
+#include "ui/console.h"
+#include "hw/framebuffer.h"
+#include "ui/pixel_ops.h"
+
+#define PL110_CR_EN   0x001
+#define PL110_CR_BGR  0x100
+#define PL110_CR_BEBO 0x200
+#define PL110_CR_BEPO 0x400
+#define PL110_CR_PWR  0x800
+
+enum pl110_bppmode
+{
+    BPP_1,
+    BPP_2,
+    BPP_4,
+    BPP_8,
+    BPP_16,
+    BPP_32,
+    BPP_16_565, /* PL111 only */
+    BPP_12      /* PL111 only */
+};
+
+
+/* The Versatile/PB uses a slightly modified PL110 controller.  */
+enum pl110_version
+{
+    PL110,
+    PL110_VERSATILE,
+    PL111
+};
+
+typedef struct {
+    SysBusDevice busdev;
+    MemoryRegion iomem;
+    QemuConsole *con;
+
+    int version;
+    uint32_t timing[4];
+    uint32_t cr;
+    uint32_t upbase;
+    uint32_t lpbase;
+    uint32_t int_status;
+    uint32_t int_mask;
+    int cols;
+    int rows;
+    enum pl110_bppmode bpp;
+    int invalidate;
+    uint32_t mux_ctrl;
+    uint32_t palette[256];
+    uint32_t raw_palette[128];
+    qemu_irq irq;
+} pl110_state;
+
+static int vmstate_pl110_post_load(void *opaque, int version_id);
+
+static const VMStateDescription vmstate_pl110 = {
+    .name = "pl110",
+    .version_id = 2,
+    .minimum_version_id = 1,
+    .post_load = vmstate_pl110_post_load,
+    .fields = (VMStateField[]) {
+        VMSTATE_INT32(version, pl110_state),
+        VMSTATE_UINT32_ARRAY(timing, pl110_state, 4),
+        VMSTATE_UINT32(cr, pl110_state),
+        VMSTATE_UINT32(upbase, pl110_state),
+        VMSTATE_UINT32(lpbase, pl110_state),
+        VMSTATE_UINT32(int_status, pl110_state),
+        VMSTATE_UINT32(int_mask, pl110_state),
+        VMSTATE_INT32(cols, pl110_state),
+        VMSTATE_INT32(rows, pl110_state),
+        VMSTATE_UINT32(bpp, pl110_state),
+        VMSTATE_INT32(invalidate, pl110_state),
+        VMSTATE_UINT32_ARRAY(palette, pl110_state, 256),
+        VMSTATE_UINT32_ARRAY(raw_palette, pl110_state, 128),
+        VMSTATE_UINT32_V(mux_ctrl, pl110_state, 2),
+        VMSTATE_END_OF_LIST()
+    }
+};
+
+static const unsigned char pl110_id[] =
+{ 0x10, 0x11, 0x04, 0x00, 0x0d, 0xf0, 0x05, 0xb1 };
+
+/* The Arm documentation (DDI0224C) says the CLDC on the Versatile board
+   has a different ID.  However Linux only looks for the normal ID.  */
+#if 0
+static const unsigned char pl110_versatile_id[] =
+{ 0x93, 0x10, 0x04, 0x00, 0x0d, 0xf0, 0x05, 0xb1 };
+#else
+#define pl110_versatile_id pl110_id
+#endif
+
+static const unsigned char pl111_id[] = {
+    0x11, 0x11, 0x24, 0x00, 0x0d, 0xf0, 0x05, 0xb1
+};
+
+/* Indexed by pl110_version */
+static const unsigned char *idregs[] = {
+    pl110_id,
+    pl110_versatile_id,
+    pl111_id
+};
+
+#define BITS 8
+#include "hw/pl110_template.h"
+#define BITS 15
+#include "hw/pl110_template.h"
+#define BITS 16
+#include "hw/pl110_template.h"
+#define BITS 24
+#include "hw/pl110_template.h"
+#define BITS 32
+#include "hw/pl110_template.h"
+
+static int pl110_enabled(pl110_state *s)
+{
+  return (s->cr & PL110_CR_EN) && (s->cr & PL110_CR_PWR);
+}
+
+static void pl110_update_display(void *opaque)
+{
+    pl110_state *s = (pl110_state *)opaque;
+    DisplaySurface *surface = qemu_console_surface(s->con);
+    drawfn* fntable;
+    drawfn fn;
+    int dest_width;
+    int src_width;
+    int bpp_offset;
+    int first;
+    int last;
+
+    if (!pl110_enabled(s))
+        return;
+
+    switch (surface_bits_per_pixel(surface)) {
+    case 0:
+        return;
+    case 8:
+        fntable = pl110_draw_fn_8;
+        dest_width = 1;
+        break;
+    case 15:
+        fntable = pl110_draw_fn_15;
+        dest_width = 2;
+        break;
+    case 16:
+        fntable = pl110_draw_fn_16;
+        dest_width = 2;
+        break;
+    case 24:
+        fntable = pl110_draw_fn_24;
+        dest_width = 3;
+        break;
+    case 32:
+        fntable = pl110_draw_fn_32;
+        dest_width = 4;
+        break;
+    default:
+        fprintf(stderr, "pl110: Bad color depth\n");
+        exit(1);
+    }
+    if (s->cr & PL110_CR_BGR)
+        bpp_offset = 0;
+    else
+        bpp_offset = 24;
+
+    if ((s->version != PL111) && (s->bpp == BPP_16)) {
+        /* The PL110's native 16 bit mode is 5551; however
+         * most boards with a PL110 implement an external
+         * mux which allows bits to be reshuffled to give
+         * 565 format. The mux is typically controlled by
+         * an external system register.
+         * This is controlled by a GPIO input pin
+         * so boards can wire it up to their register.
+         *
+         * The PL111 straightforwardly implements both
+         * 5551 and 565 under control of the bpp field
+         * in the LCDControl register.
+         */
+        switch (s->mux_ctrl) {
+        case 3: /* 565 BGR */
+            bpp_offset = (BPP_16_565 - BPP_16);
+            break;
+        case 1: /* 5551 */
+            break;
+        case 0: /* 888; also if we have loaded vmstate from an old version */
+        case 2: /* 565 RGB */
+        default:
+            /* treat as 565 but honour BGR bit */
+            bpp_offset += (BPP_16_565 - BPP_16);
+            break;
+        }
+    }
+
+    if (s->cr & PL110_CR_BEBO)
+        fn = fntable[s->bpp + 8 + bpp_offset];
+    else if (s->cr & PL110_CR_BEPO)
+        fn = fntable[s->bpp + 16 + bpp_offset];
+    else
+        fn = fntable[s->bpp + bpp_offset];
+
+    src_width = s->cols;
+    switch (s->bpp) {
+    case BPP_1:
+        src_width >>= 3;
+        break;
+    case BPP_2:
+        src_width >>= 2;
+        break;
+    case BPP_4:
+        src_width >>= 1;
+        break;
+    case BPP_8:
+        break;
+    case BPP_16:
+    case BPP_16_565:
+    case BPP_12:
+        src_width <<= 1;
+        break;
+    case BPP_32:
+        src_width <<= 2;
+        break;
+    }
+    dest_width *= s->cols;
+    first = 0;
+    framebuffer_update_display(surface, sysbus_address_space(&s->busdev),
+                               s->upbase, s->cols, s->rows,
+                               src_width, dest_width, 0,
+                               s->invalidate,
+                               fn, s->palette,
+                               &first, &last);
+    if (first >= 0) {
+        dpy_gfx_update(s->con, 0, first, s->cols, last - first + 1);
+    }
+    s->invalidate = 0;
+}
+
+static void pl110_invalidate_display(void * opaque)
+{
+    pl110_state *s = (pl110_state *)opaque;
+    s->invalidate = 1;
+    if (pl110_enabled(s)) {
+        qemu_console_resize(s->con, s->cols, s->rows);
+    }
+}
+
+static void pl110_update_palette(pl110_state *s, int n)
+{
+    DisplaySurface *surface = qemu_console_surface(s->con);
+    int i;
+    uint32_t raw;
+    unsigned int r, g, b;
+
+    raw = s->raw_palette[n];
+    n <<= 1;
+    for (i = 0; i < 2; i++) {
+        r = (raw & 0x1f) << 3;
+        raw >>= 5;
+        g = (raw & 0x1f) << 3;
+        raw >>= 5;
+        b = (raw & 0x1f) << 3;
+        /* The I bit is ignored.  */
+        raw >>= 6;
+        switch (surface_bits_per_pixel(surface)) {
+        case 8:
+            s->palette[n] = rgb_to_pixel8(r, g, b);
+            break;
+        case 15:
+            s->palette[n] = rgb_to_pixel15(r, g, b);
+            break;
+        case 16:
+            s->palette[n] = rgb_to_pixel16(r, g, b);
+            break;
+        case 24:
+        case 32:
+            s->palette[n] = rgb_to_pixel32(r, g, b);
+            break;
+        }
+        n++;
+    }
+}
+
+static void pl110_resize(pl110_state *s, int width, int height)
+{
+    if (width != s->cols || height != s->rows) {
+        if (pl110_enabled(s)) {
+            qemu_console_resize(s->con, width, height);
+        }
+    }
+    s->cols = width;
+    s->rows = height;
+}
+
+/* Update interrupts.  */
+static void pl110_update(pl110_state *s)
+{
+  /* TODO: Implement interrupts.  */
+}
+
+static uint64_t pl110_read(void *opaque, hwaddr offset,
+                           unsigned size)
+{
+    pl110_state *s = (pl110_state *)opaque;
+
+    if (offset >= 0xfe0 && offset < 0x1000) {
+        return idregs[s->version][(offset - 0xfe0) >> 2];
+    }
+    if (offset >= 0x200 && offset < 0x400) {
+        return s->raw_palette[(offset - 0x200) >> 2];
+    }
+    switch (offset >> 2) {
+    case 0: /* LCDTiming0 */
+        return s->timing[0];
+    case 1: /* LCDTiming1 */
+        return s->timing[1];
+    case 2: /* LCDTiming2 */
+        return s->timing[2];
+    case 3: /* LCDTiming3 */
+        return s->timing[3];
+    case 4: /* LCDUPBASE */
+        return s->upbase;
+    case 5: /* LCDLPBASE */
+        return s->lpbase;
+    case 6: /* LCDIMSC */
+        if (s->version != PL110) {
+            return s->cr;
+        }
+        return s->int_mask;
+    case 7: /* LCDControl */
+        if (s->version != PL110) {
+            return s->int_mask;
+        }
+        return s->cr;
+    case 8: /* LCDRIS */
+        return s->int_status;
+    case 9: /* LCDMIS */
+        return s->int_status & s->int_mask;
+    case 11: /* LCDUPCURR */
+        /* TODO: Implement vertical refresh.  */
+        return s->upbase;
+    case 12: /* LCDLPCURR */
+        return s->lpbase;
+    default:
+        qemu_log_mask(LOG_GUEST_ERROR,
+                      "pl110_read: Bad offset %x\n", (int)offset);
+        return 0;
+    }
+}
+
+static void pl110_write(void *opaque, hwaddr offset,
+                        uint64_t val, unsigned size)
+{
+    pl110_state *s = (pl110_state *)opaque;
+    int n;
+
+    /* For simplicity invalidate the display whenever a control register
+       is written to.  */
+    s->invalidate = 1;
+    if (offset >= 0x200 && offset < 0x400) {
+        /* Palette.  */
+        n = (offset - 0x200) >> 2;
+        s->raw_palette[(offset - 0x200) >> 2] = val;
+        pl110_update_palette(s, n);
+        return;
+    }
+    switch (offset >> 2) {
+    case 0: /* LCDTiming0 */
+        s->timing[0] = val;
+        n = ((val & 0xfc) + 4) * 4;
+        pl110_resize(s, n, s->rows);
+        break;
+    case 1: /* LCDTiming1 */
+        s->timing[1] = val;
+        n = (val & 0x3ff) + 1;
+        pl110_resize(s, s->cols, n);
+        break;
+    case 2: /* LCDTiming2 */
+        s->timing[2] = val;
+        break;
+    case 3: /* LCDTiming3 */
+        s->timing[3] = val;
+        break;
+    case 4: /* LCDUPBASE */
+        s->upbase = val;
+        break;
+    case 5: /* LCDLPBASE */
+        s->lpbase = val;
+        break;
+    case 6: /* LCDIMSC */
+        if (s->version != PL110) {
+            goto control;
+        }
+    imsc:
+        s->int_mask = val;
+        pl110_update(s);
+        break;
+    case 7: /* LCDControl */
+        if (s->version != PL110) {
+            goto imsc;
+        }
+    control:
+        s->cr = val;
+        s->bpp = (val >> 1) & 7;
+        if (pl110_enabled(s)) {
+            qemu_console_resize(s->con, s->cols, s->rows);
+        }
+        break;
+    case 10: /* LCDICR */
+        s->int_status &= ~val;
+        pl110_update(s);
+        break;
+    default:
+        qemu_log_mask(LOG_GUEST_ERROR,
+                      "pl110_write: Bad offset %x\n", (int)offset);
+    }
+}
+
+static const MemoryRegionOps pl110_ops = {
+    .read = pl110_read,
+    .write = pl110_write,
+    .endianness = DEVICE_NATIVE_ENDIAN,
+};
+
+static void pl110_mux_ctrl_set(void *opaque, int line, int level)
+{
+    pl110_state *s = (pl110_state *)opaque;
+    s->mux_ctrl = level;
+}
+
+static int vmstate_pl110_post_load(void *opaque, int version_id)
+{
+    pl110_state *s = opaque;
+    /* Make sure we redraw, and at the right size */
+    pl110_invalidate_display(s);
+    return 0;
+}
+
+static int pl110_init(SysBusDevice *dev)
+{
+    pl110_state *s = FROM_SYSBUS(pl110_state, dev);
+
+    memory_region_init_io(&s->iomem, &pl110_ops, s, "pl110", 0x1000);
+    sysbus_init_mmio(dev, &s->iomem);
+    sysbus_init_irq(dev, &s->irq);
+    qdev_init_gpio_in(&s->busdev.qdev, pl110_mux_ctrl_set, 1);
+    s->con = graphic_console_init(pl110_update_display,
+                                  pl110_invalidate_display,
+                                  NULL, NULL, s);
+    return 0;
+}
+
+static int pl110_versatile_init(SysBusDevice *dev)
+{
+    pl110_state *s = FROM_SYSBUS(pl110_state, dev);
+    s->version = PL110_VERSATILE;
+    return pl110_init(dev);
+}
+
+static int pl111_init(SysBusDevice *dev)
+{
+    pl110_state *s = FROM_SYSBUS(pl110_state, dev);
+    s->version = PL111;
+    return pl110_init(dev);
+}
+
+static void pl110_class_init(ObjectClass *klass, void *data)
+{
+    DeviceClass *dc = DEVICE_CLASS(klass);
+    SysBusDeviceClass *k = SYS_BUS_DEVICE_CLASS(klass);
+
+    k->init = pl110_init;
+    dc->no_user = 1;
+    dc->vmsd = &vmstate_pl110;
+}
+
+static const TypeInfo pl110_info = {
+    .name          = "pl110",
+    .parent        = TYPE_SYS_BUS_DEVICE,
+    .instance_size = sizeof(pl110_state),
+    .class_init    = pl110_class_init,
+};
+
+static void pl110_versatile_class_init(ObjectClass *klass, void *data)
+{
+    DeviceClass *dc = DEVICE_CLASS(klass);
+    SysBusDeviceClass *k = SYS_BUS_DEVICE_CLASS(klass);
+
+    k->init = pl110_versatile_init;
+    dc->no_user = 1;
+    dc->vmsd = &vmstate_pl110;
+}
+
+static const TypeInfo pl110_versatile_info = {
+    .name          = "pl110_versatile",
+    .parent        = TYPE_SYS_BUS_DEVICE,
+    .instance_size = sizeof(pl110_state),
+    .class_init    = pl110_versatile_class_init,
+};
+
+static void pl111_class_init(ObjectClass *klass, void *data)
+{
+    DeviceClass *dc = DEVICE_CLASS(klass);
+    SysBusDeviceClass *k = SYS_BUS_DEVICE_CLASS(klass);
+
+    k->init = pl111_init;
+    dc->no_user = 1;
+    dc->vmsd = &vmstate_pl110;
+}
+
+static const TypeInfo pl111_info = {
+    .name          = "pl111",
+    .parent        = TYPE_SYS_BUS_DEVICE,
+    .instance_size = sizeof(pl110_state),
+    .class_init    = pl111_class_init,
+};
+
+static void pl110_register_types(void)
+{
+    type_register_static(&pl110_info);
+    type_register_static(&pl110_versatile_info);
+    type_register_static(&pl111_info);
+}
+
+type_init(pl110_register_types)