hw: move char devices to hw/char/, configure via default-configs/

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

1 files changed, 0 insertions, 293 deletions

diff --git a/hw/grlib_apbuart.c b/hw/grlib_apbuart.c
deleted file mode 100644
index 62f799083c..0000000000
--- a/hw/grlib_apbuart.c
+++ /dev/null
@@ -1,293 +0,0 @@
-/*
- * QEMU GRLIB APB UART Emulator
- *
- * Copyright (c) 2010-2011 AdaCore
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
- * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- */
-
-#include "hw/sysbus.h"
-#include "char/char.h"
-
-#include "trace.h"
-
-#define UART_REG_SIZE 20     /* Size of memory mapped registers */
-
-/* UART status register fields */
-#define UART_DATA_READY           (1 <<  0)
-#define UART_TRANSMIT_SHIFT_EMPTY (1 <<  1)
-#define UART_TRANSMIT_FIFO_EMPTY  (1 <<  2)
-#define UART_BREAK_RECEIVED       (1 <<  3)
-#define UART_OVERRUN              (1 <<  4)
-#define UART_PARITY_ERROR         (1 <<  5)
-#define UART_FRAMING_ERROR        (1 <<  6)
-#define UART_TRANSMIT_FIFO_HALF   (1 <<  7)
-#define UART_RECEIVE_FIFO_HALF    (1 <<  8)
-#define UART_TRANSMIT_FIFO_FULL   (1 <<  9)
-#define UART_RECEIVE_FIFO_FULL    (1 << 10)
-
-/* UART control register fields */
-#define UART_RECEIVE_ENABLE          (1 <<  0)
-#define UART_TRANSMIT_ENABLE         (1 <<  1)
-#define UART_RECEIVE_INTERRUPT       (1 <<  2)
-#define UART_TRANSMIT_INTERRUPT      (1 <<  3)
-#define UART_PARITY_SELECT           (1 <<  4)
-#define UART_PARITY_ENABLE           (1 <<  5)
-#define UART_FLOW_CONTROL            (1 <<  6)
-#define UART_LOOPBACK                (1 <<  7)
-#define UART_EXTERNAL_CLOCK          (1 <<  8)
-#define UART_RECEIVE_FIFO_INTERRUPT  (1 <<  9)
-#define UART_TRANSMIT_FIFO_INTERRUPT (1 << 10)
-#define UART_FIFO_DEBUG_MODE         (1 << 11)
-#define UART_OUTPUT_ENABLE           (1 << 12)
-#define UART_FIFO_AVAILABLE          (1 << 31)
-
-/* Memory mapped register offsets */
-#define DATA_OFFSET       0x00
-#define STATUS_OFFSET     0x04
-#define CONTROL_OFFSET    0x08
-#define SCALER_OFFSET     0x0C  /* not supported */
-#define FIFO_DEBUG_OFFSET 0x10  /* not supported */
-
-#define FIFO_LENGTH 1024
-
-typedef struct UART {
-    SysBusDevice busdev;
-    MemoryRegion iomem;
-    qemu_irq irq;
-
-    CharDriverState *chr;
-
-    /* registers */
-    uint32_t status;
-    uint32_t control;
-
-    /* FIFO */
-    char buffer[FIFO_LENGTH];
-    int  len;
-    int  current;
-} UART;
-
-static int uart_data_to_read(UART *uart)
-{
-    return uart->current < uart->len;
-}
-
-static char uart_pop(UART *uart)
-{
-    char ret;
-
-    if (uart->len == 0) {
-        uart->status &= ~UART_DATA_READY;
-        return 0;
-    }
-
-    ret = uart->buffer[uart->current++];
-
-    if (uart->current >= uart->len) {
-        /* Flush */
-        uart->len     = 0;
-        uart->current = 0;
-    }
-
-    if (!uart_data_to_read(uart)) {
-        uart->status &= ~UART_DATA_READY;
-    }
-
-    return ret;
-}
-
-static void uart_add_to_fifo(UART          *uart,
-                             const uint8_t *buffer,
-                             int            length)
-{
-    if (uart->len + length > FIFO_LENGTH) {
-        abort();
-    }
-    memcpy(uart->buffer + uart->len, buffer, length);
-    uart->len += length;
-}
-
-static int grlib_apbuart_can_receive(void *opaque)
-{
-    UART *uart = opaque;
-
-    return FIFO_LENGTH - uart->len;
-}
-
-static void grlib_apbuart_receive(void *opaque, const uint8_t *buf, int size)
-{
-    UART *uart = opaque;
-
-    if (uart->control & UART_RECEIVE_ENABLE) {
-        uart_add_to_fifo(uart, buf, size);
-
-        uart->status |= UART_DATA_READY;
-
-        if (uart->control & UART_RECEIVE_INTERRUPT) {
-            qemu_irq_pulse(uart->irq);
-        }
-    }
-}
-
-static void grlib_apbuart_event(void *opaque, int event)
-{
-    trace_grlib_apbuart_event(event);
-}
-
-
-static uint64_t grlib_apbuart_read(void *opaque, hwaddr addr,
-                                   unsigned size)
-{
-    UART     *uart = opaque;
-
-    addr &= 0xff;
-
-    /* Unit registers */
-    switch (addr) {
-    case DATA_OFFSET:
-    case DATA_OFFSET + 3:       /* when only one byte read */
-        return uart_pop(uart);
-
-    case STATUS_OFFSET:
-        /* Read Only */
-        return uart->status;
-
-    case CONTROL_OFFSET:
-        return uart->control;
-
-    case SCALER_OFFSET:
-        /* Not supported */
-        return 0;
-
-    default:
-        trace_grlib_apbuart_readl_unknown(addr);
-        return 0;
-    }
-}
-
-static void grlib_apbuart_write(void *opaque, hwaddr addr,
-                                uint64_t value, unsigned size)
-{
-    UART          *uart = opaque;
-    unsigned char  c    = 0;
-
-    addr &= 0xff;
-
-    /* Unit registers */
-    switch (addr) {
-    case DATA_OFFSET:
-    case DATA_OFFSET + 3:       /* When only one byte write */
-        /* Transmit when character device available and transmitter enabled */
-        if ((uart->chr) && (uart->control & UART_TRANSMIT_ENABLE)) {
-            c = value & 0xFF;
-            qemu_chr_fe_write(uart->chr, &c, 1);
-            /* Generate interrupt */
-            if (uart->control & UART_TRANSMIT_INTERRUPT) {
-                qemu_irq_pulse(uart->irq);
-            }
-        }
-        return;
-
-    case STATUS_OFFSET:
-        /* Read Only */
-        return;
-
-    case CONTROL_OFFSET:
-        uart->control = value;
-        return;
-
-    case SCALER_OFFSET:
-        /* Not supported */
-        return;
-
-    default:
-        break;
-    }
-
-    trace_grlib_apbuart_writel_unknown(addr, value);
-}
-
-static const MemoryRegionOps grlib_apbuart_ops = {
-    .write      = grlib_apbuart_write,
-    .read       = grlib_apbuart_read,
-    .endianness = DEVICE_NATIVE_ENDIAN,
-};
-
-static int grlib_apbuart_init(SysBusDevice *dev)
-{
-    UART *uart = FROM_SYSBUS(typeof(*uart), dev);
-
-    qemu_chr_add_handlers(uart->chr,
-                          grlib_apbuart_can_receive,
-                          grlib_apbuart_receive,
-                          grlib_apbuart_event,
-                          uart);
-
-    sysbus_init_irq(dev, &uart->irq);
-
-    memory_region_init_io(&uart->iomem, &grlib_apbuart_ops, uart,
-                          "uart", UART_REG_SIZE);
-
-    sysbus_init_mmio(dev, &uart->iomem);
-
-    return 0;
-}
-
-static void grlib_apbuart_reset(DeviceState *d)
-{
-    UART *uart = container_of(d, UART, busdev.qdev);
-
-    /* Transmitter FIFO and shift registers are always empty in QEMU */
-    uart->status =  UART_TRANSMIT_FIFO_EMPTY | UART_TRANSMIT_SHIFT_EMPTY;
-    /* Everything is off */
-    uart->control = 0;
-    /* Flush receive FIFO */
-    uart->len = 0;
-    uart->current = 0;
-}
-
-static Property grlib_apbuart_properties[] = {
-    DEFINE_PROP_CHR("chrdev", UART, chr),
-    DEFINE_PROP_END_OF_LIST(),
-};
-
-static void grlib_apbuart_class_init(ObjectClass *klass, void *data)
-{
-    DeviceClass *dc = DEVICE_CLASS(klass);
-    SysBusDeviceClass *k = SYS_BUS_DEVICE_CLASS(klass);
-
-    k->init = grlib_apbuart_init;
-    dc->reset = grlib_apbuart_reset;
-    dc->props = grlib_apbuart_properties;
-}
-
-static const TypeInfo grlib_apbuart_info = {
-    .name          = "grlib,apbuart",
-    .parent        = TYPE_SYS_BUS_DEVICE,
-    .instance_size = sizeof(UART),
-    .class_init    = grlib_apbuart_class_init,
-};
-
-static void grlib_apbuart_register_types(void)
-{
-    type_register_static(&grlib_apbuart_info);
-}
-
-type_init(grlib_apbuart_register_types)