Add Intel HD Audio support to qemu.

This patch adds three devices to qemu:

intel-hda
	Intel HD Audio Controller, the PCI device.  Provides a HDA bus.
	Emulates ICH6 at the moment.  Adding a ICH9 PCIE
	variant shouldn't be hard.

hda-duplex
	HDA Codec.  Attaches to the HDA bus.  Supports 16bit stereo,
	rates 16k -> 96k, playback, recording and volume control
	(with CONFIG_MIXEMU=y).

hda-output
	HDA Codec without recording support.  Subset of the hda-duplex
	codec.  Use this if you don't want your guests access your mic.

Usage: add '-device intel-hda -device hda-duplex' to your command line.

Tested guests:
 * Linux works.
 * Win7 works.
 * DOS (mpxplay) works.
 * WinXP doesn't work.

[ v2 changes ]
 * Fixed endianess, big endian hosts work now.
 * Fixed some emulation bugs.
 * Added immediate command emulation.
 * Added vmstate support.
 * Make it behave like all other sound card drivers:
   - can be configured via '--audio-card-list=hda'
   - can be added to a VM using '-soundhw hda'
 * Code style fixups.
 * Zapped guest-triggerable asserts.
 * Handle partial reads/writes of audio data correctly.

Cc: malc <av1474@comtv.ru>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: malc <av1474@comtv.ru>

1 files changed, 717 insertions, 0 deletions

diff --git a/hw/intel-hda-defs.h b/hw/intel-hda-defs.h
new file mode 100644
index 0000000000..2e37e5b874
--- /dev/null
+++ b/hw/intel-hda-defs.h
@@ -0,0 +1,717 @@
+#ifndef HW_INTEL_HDA_DEFS_H
+#define HW_INTEL_HDA_DEFS_H
+
+/* qemu */
+#define HDA_BUFFER_SIZE 256
+
+/* --------------------------------------------------------------------- */
+/* from linux/sound/pci/hda/hda_intel.c                                  */
+
+/*
+ * registers
+ */
+#define ICH6_REG_GCAP			0x00
+#define   ICH6_GCAP_64OK	(1 << 0)   /* 64bit address support */
+#define   ICH6_GCAP_NSDO	(3 << 1)   /* # of serial data out signals */
+#define   ICH6_GCAP_BSS		(31 << 3)  /* # of bidirectional streams */
+#define   ICH6_GCAP_ISS		(15 << 8)  /* # of input streams */
+#define   ICH6_GCAP_OSS		(15 << 12) /* # of output streams */
+#define ICH6_REG_VMIN			0x02
+#define ICH6_REG_VMAJ			0x03
+#define ICH6_REG_OUTPAY			0x04
+#define ICH6_REG_INPAY			0x06
+#define ICH6_REG_GCTL			0x08
+#define   ICH6_GCTL_RESET	(1 << 0)   /* controller reset */
+#define   ICH6_GCTL_FCNTRL	(1 << 1)   /* flush control */
+#define   ICH6_GCTL_UNSOL	(1 << 8)   /* accept unsol. response enable */
+#define ICH6_REG_WAKEEN			0x0c
+#define ICH6_REG_STATESTS		0x0e
+#define ICH6_REG_GSTS			0x10
+#define   ICH6_GSTS_FSTS	(1 << 1)   /* flush status */
+#define ICH6_REG_INTCTL			0x20
+#define ICH6_REG_INTSTS			0x24
+#define ICH6_REG_WALLCLK		0x30	/* 24Mhz source */
+#define ICH6_REG_SYNC			0x34
+#define ICH6_REG_CORBLBASE		0x40
+#define ICH6_REG_CORBUBASE		0x44
+#define ICH6_REG_CORBWP			0x48
+#define ICH6_REG_CORBRP			0x4a
+#define   ICH6_CORBRP_RST	(1 << 15)  /* read pointer reset */
+#define ICH6_REG_CORBCTL		0x4c
+#define   ICH6_CORBCTL_RUN	(1 << 1)   /* enable DMA */
+#define   ICH6_CORBCTL_CMEIE	(1 << 0)   /* enable memory error irq */
+#define ICH6_REG_CORBSTS		0x4d
+#define   ICH6_CORBSTS_CMEI	(1 << 0)   /* memory error indication */
+#define ICH6_REG_CORBSIZE		0x4e
+
+#define ICH6_REG_RIRBLBASE		0x50
+#define ICH6_REG_RIRBUBASE		0x54
+#define ICH6_REG_RIRBWP			0x58
+#define   ICH6_RIRBWP_RST	(1 << 15)  /* write pointer reset */
+#define ICH6_REG_RINTCNT		0x5a
+#define ICH6_REG_RIRBCTL		0x5c
+#define   ICH6_RBCTL_IRQ_EN	(1 << 0)   /* enable IRQ */
+#define   ICH6_RBCTL_DMA_EN	(1 << 1)   /* enable DMA */
+#define   ICH6_RBCTL_OVERRUN_EN	(1 << 2)   /* enable overrun irq */
+#define ICH6_REG_RIRBSTS		0x5d
+#define   ICH6_RBSTS_IRQ	(1 << 0)   /* response irq */
+#define   ICH6_RBSTS_OVERRUN	(1 << 2)   /* overrun irq */
+#define ICH6_REG_RIRBSIZE		0x5e
+
+#define ICH6_REG_IC			0x60
+#define ICH6_REG_IR			0x64
+#define ICH6_REG_IRS			0x68
+#define   ICH6_IRS_VALID	(1<<1)
+#define   ICH6_IRS_BUSY		(1<<0)
+
+#define ICH6_REG_DPLBASE		0x70
+#define ICH6_REG_DPUBASE		0x74
+#define   ICH6_DPLBASE_ENABLE	0x1	/* Enable position buffer */
+
+/* SD offset: SDI0=0x80, SDI1=0xa0, ... SDO3=0x160 */
+enum { SDI0, SDI1, SDI2, SDI3, SDO0, SDO1, SDO2, SDO3 };
+
+/* stream register offsets from stream base */
+#define ICH6_REG_SD_CTL			0x00
+#define ICH6_REG_SD_STS			0x03
+#define ICH6_REG_SD_LPIB		0x04
+#define ICH6_REG_SD_CBL			0x08
+#define ICH6_REG_SD_LVI			0x0c
+#define ICH6_REG_SD_FIFOW		0x0e
+#define ICH6_REG_SD_FIFOSIZE		0x10
+#define ICH6_REG_SD_FORMAT		0x12
+#define ICH6_REG_SD_BDLPL		0x18
+#define ICH6_REG_SD_BDLPU		0x1c
+
+/* PCI space */
+#define ICH6_PCIREG_TCSEL	0x44
+
+/*
+ * other constants
+ */
+
+/* max number of SDs */
+/* ICH, ATI and VIA have 4 playback and 4 capture */
+#define ICH6_NUM_CAPTURE	4
+#define ICH6_NUM_PLAYBACK	4
+
+/* ULI has 6 playback and 5 capture */
+#define ULI_NUM_CAPTURE		5
+#define ULI_NUM_PLAYBACK	6
+
+/* ATI HDMI has 1 playback and 0 capture */
+#define ATIHDMI_NUM_CAPTURE	0
+#define ATIHDMI_NUM_PLAYBACK	1
+
+/* TERA has 4 playback and 3 capture */
+#define TERA_NUM_CAPTURE	3
+#define TERA_NUM_PLAYBACK	4
+
+/* this number is statically defined for simplicity */
+#define MAX_AZX_DEV		16
+
+/* max number of fragments - we may use more if allocating more pages for BDL */
+#define BDL_SIZE		4096
+#define AZX_MAX_BDL_ENTRIES	(BDL_SIZE / 16)
+#define AZX_MAX_FRAG		32
+/* max buffer size - no h/w limit, you can increase as you like */
+#define AZX_MAX_BUF_SIZE	(1024*1024*1024)
+
+/* RIRB int mask: overrun[2], response[0] */
+#define RIRB_INT_RESPONSE	0x01
+#define RIRB_INT_OVERRUN	0x04
+#define RIRB_INT_MASK		0x05
+
+/* STATESTS int mask: S3,SD2,SD1,SD0 */
+#define AZX_MAX_CODECS		8
+#define AZX_DEFAULT_CODECS	4
+#define STATESTS_INT_MASK	((1 << AZX_MAX_CODECS) - 1)
+
+/* SD_CTL bits */
+#define SD_CTL_STREAM_RESET	0x01	/* stream reset bit */
+#define SD_CTL_DMA_START	0x02	/* stream DMA start bit */
+#define SD_CTL_STRIPE		(3 << 16)	/* stripe control */
+#define SD_CTL_TRAFFIC_PRIO	(1 << 18)	/* traffic priority */
+#define SD_CTL_DIR		(1 << 19)	/* bi-directional stream */
+#define SD_CTL_STREAM_TAG_MASK	(0xf << 20)
+#define SD_CTL_STREAM_TAG_SHIFT	20
+
+/* SD_CTL and SD_STS */
+#define SD_INT_DESC_ERR		0x10	/* descriptor error interrupt */
+#define SD_INT_FIFO_ERR		0x08	/* FIFO error interrupt */
+#define SD_INT_COMPLETE		0x04	/* completion interrupt */
+#define SD_INT_MASK		(SD_INT_DESC_ERR|SD_INT_FIFO_ERR|\
+				 SD_INT_COMPLETE)
+
+/* SD_STS */
+#define SD_STS_FIFO_READY	0x20	/* FIFO ready */
+
+/* INTCTL and INTSTS */
+#define ICH6_INT_ALL_STREAM	0xff	   /* all stream interrupts */
+#define ICH6_INT_CTRL_EN	0x40000000 /* controller interrupt enable bit */
+#define ICH6_INT_GLOBAL_EN	0x80000000 /* global interrupt enable bit */
+
+/* below are so far hardcoded - should read registers in future */
+#define ICH6_MAX_CORB_ENTRIES	256
+#define ICH6_MAX_RIRB_ENTRIES	256
+
+/* position fix mode */
+enum {
+	POS_FIX_AUTO,
+	POS_FIX_LPIB,
+	POS_FIX_POSBUF,
+};
+
+/* Defines for ATI HD Audio support in SB450 south bridge */
+#define ATI_SB450_HDAUDIO_MISC_CNTR2_ADDR   0x42
+#define ATI_SB450_HDAUDIO_ENABLE_SNOOP      0x02
+
+/* Defines for Nvidia HDA support */
+#define NVIDIA_HDA_TRANSREG_ADDR      0x4e
+#define NVIDIA_HDA_ENABLE_COHBITS     0x0f
+#define NVIDIA_HDA_ISTRM_COH          0x4d
+#define NVIDIA_HDA_OSTRM_COH          0x4c
+#define NVIDIA_HDA_ENABLE_COHBIT      0x01
+
+/* Defines for Intel SCH HDA snoop control */
+#define INTEL_SCH_HDA_DEVC      0x78
+#define INTEL_SCH_HDA_DEVC_NOSNOOP       (0x1<<11)
+
+/* Define IN stream 0 FIFO size offset in VIA controller */
+#define VIA_IN_STREAM0_FIFO_SIZE_OFFSET	0x90
+/* Define VIA HD Audio Device ID*/
+#define VIA_HDAC_DEVICE_ID		0x3288
+
+/* HD Audio class code */
+#define PCI_CLASS_MULTIMEDIA_HD_AUDIO	0x0403
+
+/* --------------------------------------------------------------------- */
+/* from linux/sound/pci/hda/hda_codec.h                                  */
+
+/*
+ * nodes
+ */
+#define	AC_NODE_ROOT		0x00
+
+/*
+ * function group types
+ */
+enum {
+	AC_GRP_AUDIO_FUNCTION = 0x01,
+	AC_GRP_MODEM_FUNCTION = 0x02,
+};
+	
+/*
+ * widget types
+ */
+enum {
+	AC_WID_AUD_OUT,		/* Audio Out */
+	AC_WID_AUD_IN,		/* Audio In */
+	AC_WID_AUD_MIX,		/* Audio Mixer */
+	AC_WID_AUD_SEL,		/* Audio Selector */
+	AC_WID_PIN,		/* Pin Complex */
+	AC_WID_POWER,		/* Power */
+	AC_WID_VOL_KNB,		/* Volume Knob */
+	AC_WID_BEEP,		/* Beep Generator */
+	AC_WID_VENDOR = 0x0f	/* Vendor specific */
+};
+
+/*
+ * GET verbs
+ */
+#define AC_VERB_GET_STREAM_FORMAT		0x0a00
+#define AC_VERB_GET_AMP_GAIN_MUTE		0x0b00
+#define AC_VERB_GET_PROC_COEF			0x0c00
+#define AC_VERB_GET_COEF_INDEX			0x0d00
+#define AC_VERB_PARAMETERS			0x0f00
+#define AC_VERB_GET_CONNECT_SEL			0x0f01
+#define AC_VERB_GET_CONNECT_LIST		0x0f02
+#define AC_VERB_GET_PROC_STATE			0x0f03
+#define AC_VERB_GET_SDI_SELECT			0x0f04
+#define AC_VERB_GET_POWER_STATE			0x0f05
+#define AC_VERB_GET_CONV			0x0f06
+#define AC_VERB_GET_PIN_WIDGET_CONTROL		0x0f07
+#define AC_VERB_GET_UNSOLICITED_RESPONSE	0x0f08
+#define AC_VERB_GET_PIN_SENSE			0x0f09
+#define AC_VERB_GET_BEEP_CONTROL		0x0f0a
+#define AC_VERB_GET_EAPD_BTLENABLE		0x0f0c
+#define AC_VERB_GET_DIGI_CONVERT_1		0x0f0d
+#define AC_VERB_GET_DIGI_CONVERT_2		0x0f0e /* unused */
+#define AC_VERB_GET_VOLUME_KNOB_CONTROL		0x0f0f
+/* f10-f1a: GPIO */
+#define AC_VERB_GET_GPIO_DATA			0x0f15
+#define AC_VERB_GET_GPIO_MASK			0x0f16
+#define AC_VERB_GET_GPIO_DIRECTION		0x0f17
+#define AC_VERB_GET_GPIO_WAKE_MASK		0x0f18
+#define AC_VERB_GET_GPIO_UNSOLICITED_RSP_MASK	0x0f19
+#define AC_VERB_GET_GPIO_STICKY_MASK		0x0f1a
+#define AC_VERB_GET_CONFIG_DEFAULT		0x0f1c
+/* f20: AFG/MFG */
+#define AC_VERB_GET_SUBSYSTEM_ID		0x0f20
+#define AC_VERB_GET_CVT_CHAN_COUNT		0x0f2d
+#define AC_VERB_GET_HDMI_DIP_SIZE		0x0f2e
+#define AC_VERB_GET_HDMI_ELDD			0x0f2f
+#define AC_VERB_GET_HDMI_DIP_INDEX		0x0f30
+#define AC_VERB_GET_HDMI_DIP_DATA		0x0f31
+#define AC_VERB_GET_HDMI_DIP_XMIT		0x0f32
+#define AC_VERB_GET_HDMI_CP_CTRL		0x0f33
+#define AC_VERB_GET_HDMI_CHAN_SLOT		0x0f34
+
+/*
+ * SET verbs
+ */
+#define AC_VERB_SET_STREAM_FORMAT		0x200
+#define AC_VERB_SET_AMP_GAIN_MUTE		0x300
+#define AC_VERB_SET_PROC_COEF			0x400
+#define AC_VERB_SET_COEF_INDEX			0x500
+#define AC_VERB_SET_CONNECT_SEL			0x701
+#define AC_VERB_SET_PROC_STATE			0x703
+#define AC_VERB_SET_SDI_SELECT			0x704
+#define AC_VERB_SET_POWER_STATE			0x705
+#define AC_VERB_SET_CHANNEL_STREAMID		0x706
+#define AC_VERB_SET_PIN_WIDGET_CONTROL		0x707
+#define AC_VERB_SET_UNSOLICITED_ENABLE		0x708
+#define AC_VERB_SET_PIN_SENSE			0x709
+#define AC_VERB_SET_BEEP_CONTROL		0x70a
+#define AC_VERB_SET_EAPD_BTLENABLE		0x70c
+#define AC_VERB_SET_DIGI_CONVERT_1		0x70d
+#define AC_VERB_SET_DIGI_CONVERT_2		0x70e
+#define AC_VERB_SET_VOLUME_KNOB_CONTROL		0x70f
+#define AC_VERB_SET_GPIO_DATA			0x715
+#define AC_VERB_SET_GPIO_MASK			0x716
+#define AC_VERB_SET_GPIO_DIRECTION		0x717
+#define AC_VERB_SET_GPIO_WAKE_MASK		0x718
+#define AC_VERB_SET_GPIO_UNSOLICITED_RSP_MASK	0x719
+#define AC_VERB_SET_GPIO_STICKY_MASK		0x71a
+#define AC_VERB_SET_CONFIG_DEFAULT_BYTES_0	0x71c
+#define AC_VERB_SET_CONFIG_DEFAULT_BYTES_1	0x71d
+#define AC_VERB_SET_CONFIG_DEFAULT_BYTES_2	0x71e
+#define AC_VERB_SET_CONFIG_DEFAULT_BYTES_3	0x71f
+#define AC_VERB_SET_EAPD				0x788
+#define AC_VERB_SET_CODEC_RESET			0x7ff
+#define AC_VERB_SET_CVT_CHAN_COUNT		0x72d
+#define AC_VERB_SET_HDMI_DIP_INDEX		0x730
+#define AC_VERB_SET_HDMI_DIP_DATA		0x731
+#define AC_VERB_SET_HDMI_DIP_XMIT		0x732
+#define AC_VERB_SET_HDMI_CP_CTRL		0x733
+#define AC_VERB_SET_HDMI_CHAN_SLOT		0x734
+
+/*
+ * Parameter IDs
+ */
+#define AC_PAR_VENDOR_ID		0x00
+#define AC_PAR_SUBSYSTEM_ID		0x01
+#define AC_PAR_REV_ID			0x02
+#define AC_PAR_NODE_COUNT		0x04
+#define AC_PAR_FUNCTION_TYPE		0x05
+#define AC_PAR_AUDIO_FG_CAP		0x08
+#define AC_PAR_AUDIO_WIDGET_CAP		0x09
+#define AC_PAR_PCM			0x0a
+#define AC_PAR_STREAM			0x0b
+#define AC_PAR_PIN_CAP			0x0c
+#define AC_PAR_AMP_IN_CAP		0x0d
+#define AC_PAR_CONNLIST_LEN		0x0e
+#define AC_PAR_POWER_STATE		0x0f
+#define AC_PAR_PROC_CAP			0x10
+#define AC_PAR_GPIO_CAP			0x11
+#define AC_PAR_AMP_OUT_CAP		0x12
+#define AC_PAR_VOL_KNB_CAP		0x13
+#define AC_PAR_HDMI_LPCM_CAP		0x20
+
+/*
+ * AC_VERB_PARAMETERS results (32bit)
+ */
+
+/* Function Group Type */
+#define AC_FGT_TYPE			(0xff<<0)
+#define AC_FGT_TYPE_SHIFT		0
+#define AC_FGT_UNSOL_CAP		(1<<8)
+
+/* Audio Function Group Capabilities */
+#define AC_AFG_OUT_DELAY		(0xf<<0)
+#define AC_AFG_IN_DELAY			(0xf<<8)
+#define AC_AFG_BEEP_GEN			(1<<16)
+
+/* Audio Widget Capabilities */
+#define AC_WCAP_STEREO			(1<<0)	/* stereo I/O */
+#define AC_WCAP_IN_AMP			(1<<1)	/* AMP-in present */
+#define AC_WCAP_OUT_AMP			(1<<2)	/* AMP-out present */
+#define AC_WCAP_AMP_OVRD		(1<<3)	/* AMP-parameter override */
+#define AC_WCAP_FORMAT_OVRD		(1<<4)	/* format override */
+#define AC_WCAP_STRIPE			(1<<5)	/* stripe */
+#define AC_WCAP_PROC_WID		(1<<6)	/* Proc Widget */
+#define AC_WCAP_UNSOL_CAP		(1<<7)	/* Unsol capable */
+#define AC_WCAP_CONN_LIST		(1<<8)	/* connection list */
+#define AC_WCAP_DIGITAL			(1<<9)	/* digital I/O */
+#define AC_WCAP_POWER			(1<<10)	/* power control */
+#define AC_WCAP_LR_SWAP			(1<<11)	/* L/R swap */
+#define AC_WCAP_CP_CAPS			(1<<12) /* content protection */
+#define AC_WCAP_CHAN_CNT_EXT		(7<<13)	/* channel count ext */
+#define AC_WCAP_DELAY			(0xf<<16)
+#define AC_WCAP_DELAY_SHIFT		16
+#define AC_WCAP_TYPE			(0xf<<20)
+#define AC_WCAP_TYPE_SHIFT		20
+
+/* supported PCM rates and bits */
+#define AC_SUPPCM_RATES			(0xfff << 0)
+#define AC_SUPPCM_BITS_8		(1<<16)
+#define AC_SUPPCM_BITS_16		(1<<17)
+#define AC_SUPPCM_BITS_20		(1<<18)
+#define AC_SUPPCM_BITS_24		(1<<19)
+#define AC_SUPPCM_BITS_32		(1<<20)
+
+/* supported PCM stream format */
+#define AC_SUPFMT_PCM			(1<<0)
+#define AC_SUPFMT_FLOAT32		(1<<1)
+#define AC_SUPFMT_AC3			(1<<2)
+
+/* GP I/O count */
+#define AC_GPIO_IO_COUNT		(0xff<<0)
+#define AC_GPIO_O_COUNT			(0xff<<8)
+#define AC_GPIO_O_COUNT_SHIFT		8
+#define AC_GPIO_I_COUNT			(0xff<<16)
+#define AC_GPIO_I_COUNT_SHIFT		16
+#define AC_GPIO_UNSOLICITED		(1<<30)
+#define AC_GPIO_WAKE			(1<<31)
+
+/* Converter stream, channel */
+#define AC_CONV_CHANNEL			(0xf<<0)
+#define AC_CONV_STREAM			(0xf<<4)
+#define AC_CONV_STREAM_SHIFT		4
+
+/* Input converter SDI select */
+#define AC_SDI_SELECT			(0xf<<0)
+
+/* stream format id */
+#define AC_FMT_CHAN_SHIFT		0
+#define AC_FMT_CHAN_MASK		(0x0f << 0)
+#define AC_FMT_BITS_SHIFT		4
+#define AC_FMT_BITS_MASK		(7 << 4)
+#define AC_FMT_BITS_8			(0 << 4)
+#define AC_FMT_BITS_16			(1 << 4)
+#define AC_FMT_BITS_20			(2 << 4)
+#define AC_FMT_BITS_24			(3 << 4)
+#define AC_FMT_BITS_32			(4 << 4)
+#define AC_FMT_DIV_SHIFT		8
+#define AC_FMT_DIV_MASK			(7 << 8)
+#define AC_FMT_MULT_SHIFT		11
+#define AC_FMT_MULT_MASK		(7 << 11)
+#define AC_FMT_BASE_SHIFT		14
+#define AC_FMT_BASE_48K			(0 << 14)
+#define AC_FMT_BASE_44K			(1 << 14)
+#define AC_FMT_TYPE_SHIFT		15
+#define AC_FMT_TYPE_PCM			(0 << 15)
+#define AC_FMT_TYPE_NON_PCM		(1 << 15)
+
+/* Unsolicited response control */
+#define AC_UNSOL_TAG			(0x3f<<0)
+#define AC_UNSOL_ENABLED		(1<<7)
+#define AC_USRSP_EN			AC_UNSOL_ENABLED
+
+/* Unsolicited responses */
+#define AC_UNSOL_RES_TAG		(0x3f<<26)
+#define AC_UNSOL_RES_TAG_SHIFT		26
+#define AC_UNSOL_RES_SUBTAG		(0x1f<<21)
+#define AC_UNSOL_RES_SUBTAG_SHIFT	21
+#define AC_UNSOL_RES_ELDV		(1<<1)	/* ELD Data valid (for HDMI) */
+#define AC_UNSOL_RES_PD			(1<<0)	/* pinsense detect */
+#define AC_UNSOL_RES_CP_STATE		(1<<1)	/* content protection */
+#define AC_UNSOL_RES_CP_READY		(1<<0)	/* content protection */
+
+/* Pin widget capabilies */
+#define AC_PINCAP_IMP_SENSE		(1<<0)	/* impedance sense capable */
+#define AC_PINCAP_TRIG_REQ		(1<<1)	/* trigger required */
+#define AC_PINCAP_PRES_DETECT		(1<<2)	/* presence detect capable */
+#define AC_PINCAP_HP_DRV		(1<<3)	/* headphone drive capable */
+#define AC_PINCAP_OUT			(1<<4)	/* output capable */
+#define AC_PINCAP_IN			(1<<5)	/* input capable */
+#define AC_PINCAP_BALANCE		(1<<6)	/* balanced I/O capable */
+/* Note: This LR_SWAP pincap is defined in the Realtek ALC883 specification,
+ *       but is marked reserved in the Intel HDA specification.
+ */
+#define AC_PINCAP_LR_SWAP		(1<<7)	/* L/R swap */
+/* Note: The same bit as LR_SWAP is newly defined as HDMI capability
+ *       in HD-audio specification
+ */
+#define AC_PINCAP_HDMI			(1<<7)	/* HDMI pin */
+#define AC_PINCAP_DP			(1<<24)	/* DisplayPort pin, can
+						 * coexist with AC_PINCAP_HDMI
+						 */
+#define AC_PINCAP_VREF			(0x37<<8)
+#define AC_PINCAP_VREF_SHIFT		8
+#define AC_PINCAP_EAPD			(1<<16)	/* EAPD capable */
+#define AC_PINCAP_HBR			(1<<27)	/* High Bit Rate */
+/* Vref status (used in pin cap) */
+#define AC_PINCAP_VREF_HIZ		(1<<0)	/* Hi-Z */
+#define AC_PINCAP_VREF_50		(1<<1)	/* 50% */
+#define AC_PINCAP_VREF_GRD		(1<<2)	/* ground */
+#define AC_PINCAP_VREF_80		(1<<4)	/* 80% */
+#define AC_PINCAP_VREF_100		(1<<5)	/* 100% */
+
+/* Amplifier capabilities */
+#define AC_AMPCAP_OFFSET		(0x7f<<0)  /* 0dB offset */
+#define AC_AMPCAP_OFFSET_SHIFT		0
+#define AC_AMPCAP_NUM_STEPS		(0x7f<<8)  /* number of steps */
+#define AC_AMPCAP_NUM_STEPS_SHIFT	8
+#define AC_AMPCAP_STEP_SIZE		(0x7f<<16) /* step size 0-32dB
+						    * in 0.25dB
+						    */
+#define AC_AMPCAP_STEP_SIZE_SHIFT	16
+#define AC_AMPCAP_MUTE			(1<<31)    /* mute capable */
+#define AC_AMPCAP_MUTE_SHIFT		31
+
+/* Connection list */
+#define AC_CLIST_LENGTH			(0x7f<<0)
+#define AC_CLIST_LONG			(1<<7)
+
+/* Supported power status */
+#define AC_PWRST_D0SUP			(1<<0)
+#define AC_PWRST_D1SUP			(1<<1)
+#define AC_PWRST_D2SUP			(1<<2)
+#define AC_PWRST_D3SUP			(1<<3)
+#define AC_PWRST_D3COLDSUP		(1<<4)
+#define AC_PWRST_S3D3COLDSUP		(1<<29)
+#define AC_PWRST_CLKSTOP		(1<<30)
+#define AC_PWRST_EPSS			(1U<<31)
+
+/* Power state values */
+#define AC_PWRST_SETTING		(0xf<<0)
+#define AC_PWRST_ACTUAL			(0xf<<4)
+#define AC_PWRST_ACTUAL_SHIFT		4
+#define AC_PWRST_D0			0x00
+#define AC_PWRST_D1			0x01
+#define AC_PWRST_D2			0x02
+#define AC_PWRST_D3			0x03
+
+/* Processing capabilies */
+#define AC_PCAP_BENIGN			(1<<0)
+#define AC_PCAP_NUM_COEF		(0xff<<8)
+#define AC_PCAP_NUM_COEF_SHIFT		8
+
+/* Volume knobs capabilities */
+#define AC_KNBCAP_NUM_STEPS		(0x7f<<0)
+#define AC_KNBCAP_DELTA			(1<<7)
+
+/* HDMI LPCM capabilities */
+#define AC_LPCMCAP_48K_CP_CHNS		(0x0f<<0) /* max channels w/ CP-on */	
+#define AC_LPCMCAP_48K_NO_CHNS		(0x0f<<4) /* max channels w/o CP-on */
+#define AC_LPCMCAP_48K_20BIT		(1<<8)	/* 20b bitrate supported */
+#define AC_LPCMCAP_48K_24BIT		(1<<9)	/* 24b bitrate supported */
+#define AC_LPCMCAP_96K_CP_CHNS		(0x0f<<10) /* max channels w/ CP-on */	
+#define AC_LPCMCAP_96K_NO_CHNS		(0x0f<<14) /* max channels w/o CP-on */
+#define AC_LPCMCAP_96K_20BIT		(1<<18)	/* 20b bitrate supported */
+#define AC_LPCMCAP_96K_24BIT		(1<<19)	/* 24b bitrate supported */
+#define AC_LPCMCAP_192K_CP_CHNS		(0x0f<<20) /* max channels w/ CP-on */	
+#define AC_LPCMCAP_192K_NO_CHNS		(0x0f<<24) /* max channels w/o CP-on */
+#define AC_LPCMCAP_192K_20BIT		(1<<28)	/* 20b bitrate supported */
+#define AC_LPCMCAP_192K_24BIT		(1<<29)	/* 24b bitrate supported */
+#define AC_LPCMCAP_44K			(1<<30)	/* 44.1kHz support */
+#define AC_LPCMCAP_44K_MS		(1<<31)	/* 44.1kHz-multiplies support */
+
+/*
+ * Control Parameters
+ */
+
+/* Amp gain/mute */
+#define AC_AMP_MUTE			(1<<7)
+#define AC_AMP_GAIN			(0x7f)
+#define AC_AMP_GET_INDEX		(0xf<<0)
+
+#define AC_AMP_GET_LEFT			(1<<13)
+#define AC_AMP_GET_RIGHT		(0<<13)
+#define AC_AMP_GET_OUTPUT		(1<<15)
+#define AC_AMP_GET_INPUT		(0<<15)
+
+#define AC_AMP_SET_INDEX		(0xf<<8)
+#define AC_AMP_SET_INDEX_SHIFT		8
+#define AC_AMP_SET_RIGHT		(1<<12)
+#define AC_AMP_SET_LEFT			(1<<13)
+#define AC_AMP_SET_INPUT		(1<<14)
+#define AC_AMP_SET_OUTPUT		(1<<15)
+
+/* DIGITAL1 bits */
+#define AC_DIG1_ENABLE			(1<<0)
+#define AC_DIG1_V			(1<<1)
+#define AC_DIG1_VCFG			(1<<2)
+#define AC_DIG1_EMPHASIS		(1<<3)
+#define AC_DIG1_COPYRIGHT		(1<<4)
+#define AC_DIG1_NONAUDIO		(1<<5)
+#define AC_DIG1_PROFESSIONAL		(1<<6)
+#define AC_DIG1_LEVEL			(1<<7)
+
+/* DIGITAL2 bits */
+#define AC_DIG2_CC			(0x7f<<0)
+
+/* Pin widget control - 8bit */
+#define AC_PINCTL_EPT			(0x3<<0)
+#define AC_PINCTL_EPT_NATIVE		0
+#define AC_PINCTL_EPT_HBR		3
+#define AC_PINCTL_VREFEN		(0x7<<0)
+#define AC_PINCTL_VREF_HIZ		0	/* Hi-Z */
+#define AC_PINCTL_VREF_50		1	/* 50% */
+#define AC_PINCTL_VREF_GRD		2	/* ground */
+#define AC_PINCTL_VREF_80		4	/* 80% */
+#define AC_PINCTL_VREF_100		5	/* 100% */
+#define AC_PINCTL_IN_EN			(1<<5)
+#define AC_PINCTL_OUT_EN		(1<<6)
+#define AC_PINCTL_HP_EN			(1<<7)
+
+/* Pin sense - 32bit */
+#define AC_PINSENSE_IMPEDANCE_MASK	(0x7fffffff)
+#define AC_PINSENSE_PRESENCE		(1<<31)
+#define AC_PINSENSE_ELDV		(1<<30)	/* ELD valid (HDMI) */
+
+/* EAPD/BTL enable - 32bit */
+#define AC_EAPDBTL_BALANCED		(1<<0)
+#define AC_EAPDBTL_EAPD			(1<<1)
+#define AC_EAPDBTL_LR_SWAP		(1<<2)
+
+/* HDMI ELD data */
+#define AC_ELDD_ELD_VALID		(1<<31)
+#define AC_ELDD_ELD_DATA		0xff
+
+/* HDMI DIP size */
+#define AC_DIPSIZE_ELD_BUF		(1<<3) /* ELD buf size of packet size */
+#define AC_DIPSIZE_PACK_IDX		(0x07<<0) /* packet index */
+
+/* HDMI DIP index */
+#define AC_DIPIDX_PACK_IDX		(0x07<<5) /* packet idnex */
+#define AC_DIPIDX_BYTE_IDX		(0x1f<<0) /* byte index */
+
+/* HDMI DIP xmit (transmit) control */
+#define AC_DIPXMIT_MASK			(0x3<<6)
+#define AC_DIPXMIT_DISABLE		(0x0<<6) /* disable xmit */
+#define AC_DIPXMIT_ONCE			(0x2<<6) /* xmit once then disable */
+#define AC_DIPXMIT_BEST			(0x3<<6) /* best effort */
+
+/* HDMI content protection (CP) control */
+#define AC_CPCTRL_CES			(1<<9) /* current encryption state */
+#define AC_CPCTRL_READY			(1<<8) /* ready bit */
+#define AC_CPCTRL_SUBTAG		(0x1f<<3) /* subtag for unsol-resp */
+#define AC_CPCTRL_STATE			(3<<0) /* current CP request state */
+
+/* Converter channel <-> HDMI slot mapping */
+#define AC_CVTMAP_HDMI_SLOT		(0xf<<0) /* HDMI slot number */
+#define AC_CVTMAP_CHAN			(0xf<<4) /* converter channel number */
+
+/* configuration default - 32bit */
+#define AC_DEFCFG_SEQUENCE		(0xf<<0)
+#define AC_DEFCFG_DEF_ASSOC		(0xf<<4)
+#define AC_DEFCFG_ASSOC_SHIFT		4
+#define AC_DEFCFG_MISC			(0xf<<8)
+#define AC_DEFCFG_MISC_SHIFT		8
+#define AC_DEFCFG_MISC_NO_PRESENCE	(1<<0)
+#define AC_DEFCFG_COLOR			(0xf<<12)
+#define AC_DEFCFG_COLOR_SHIFT		12
+#define AC_DEFCFG_CONN_TYPE		(0xf<<16)
+#define AC_DEFCFG_CONN_TYPE_SHIFT	16
+#define AC_DEFCFG_DEVICE		(0xf<<20)
+#define AC_DEFCFG_DEVICE_SHIFT		20
+#define AC_DEFCFG_LOCATION		(0x3f<<24)
+#define AC_DEFCFG_LOCATION_SHIFT	24
+#define AC_DEFCFG_PORT_CONN		(0x3<<30)
+#define AC_DEFCFG_PORT_CONN_SHIFT	30
+
+/* device device types (0x0-0xf) */
+enum {
+	AC_JACK_LINE_OUT,
+	AC_JACK_SPEAKER,
+	AC_JACK_HP_OUT,
+	AC_JACK_CD,
+	AC_JACK_SPDIF_OUT,
+	AC_JACK_DIG_OTHER_OUT,
+	AC_JACK_MODEM_LINE_SIDE,
+	AC_JACK_MODEM_HAND_SIDE,
+	AC_JACK_LINE_IN,
+	AC_JACK_AUX,
+	AC_JACK_MIC_IN,
+	AC_JACK_TELEPHONY,
+	AC_JACK_SPDIF_IN,
+	AC_JACK_DIG_OTHER_IN,
+	AC_JACK_OTHER = 0xf,
+};
+
+/* jack connection types (0x0-0xf) */
+enum {
+	AC_JACK_CONN_UNKNOWN,
+	AC_JACK_CONN_1_8,
+	AC_JACK_CONN_1_4,
+	AC_JACK_CONN_ATAPI,
+	AC_JACK_CONN_RCA,
+	AC_JACK_CONN_OPTICAL,
+	AC_JACK_CONN_OTHER_DIGITAL,
+	AC_JACK_CONN_OTHER_ANALOG,
+	AC_JACK_CONN_DIN,
+	AC_JACK_CONN_XLR,
+	AC_JACK_CONN_RJ11,
+	AC_JACK_CONN_COMB,
+	AC_JACK_CONN_OTHER = 0xf,
+};
+
+/* jack colors (0x0-0xf) */
+enum {
+	AC_JACK_COLOR_UNKNOWN,
+	AC_JACK_COLOR_BLACK,
+	AC_JACK_COLOR_GREY,
+	AC_JACK_COLOR_BLUE,
+	AC_JACK_COLOR_GREEN,
+	AC_JACK_COLOR_RED,
+	AC_JACK_COLOR_ORANGE,
+	AC_JACK_COLOR_YELLOW,
+	AC_JACK_COLOR_PURPLE,
+	AC_JACK_COLOR_PINK,
+	AC_JACK_COLOR_WHITE = 0xe,
+	AC_JACK_COLOR_OTHER,
+};
+
+/* Jack location (0x0-0x3f) */
+/* common case */
+enum {
+	AC_JACK_LOC_NONE,
+	AC_JACK_LOC_REAR,
+	AC_JACK_LOC_FRONT,
+	AC_JACK_LOC_LEFT,
+	AC_JACK_LOC_RIGHT,
+	AC_JACK_LOC_TOP,
+	AC_JACK_LOC_BOTTOM,
+};
+/* bits 4-5 */
+enum {
+	AC_JACK_LOC_EXTERNAL = 0x00,
+	AC_JACK_LOC_INTERNAL = 0x10,
+	AC_JACK_LOC_SEPARATE = 0x20,
+	AC_JACK_LOC_OTHER    = 0x30,
+};
+enum {
+	/* external on primary chasis */
+	AC_JACK_LOC_REAR_PANEL = 0x07,
+	AC_JACK_LOC_DRIVE_BAY,
+	/* internal */
+	AC_JACK_LOC_RISER = 0x17,
+	AC_JACK_LOC_HDMI,
+	AC_JACK_LOC_ATAPI,
+	/* others */
+	AC_JACK_LOC_MOBILE_IN = 0x37,
+	AC_JACK_LOC_MOBILE_OUT,
+};
+
+/* Port connectivity (0-3) */
+enum {
+	AC_JACK_PORT_COMPLEX,
+	AC_JACK_PORT_NONE,
+	AC_JACK_PORT_FIXED,
+	AC_JACK_PORT_BOTH,
+};
+
+/* max. connections to a widget */
+#define HDA_MAX_CONNECTIONS	32
+
+/* max. codec address */
+#define HDA_MAX_CODEC_ADDRESS	0x0f
+
+/* max number of PCM devics per card */
+#define HDA_MAX_PCMS		10
+
+/* --------------------------------------------------------------------- */
+
+#endif