hw: move target-independent files to subdirectories

This patch tackles all files that are compiled once, moving
them to subdirectories of hw/.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

1 files changed, 0 insertions, 193 deletions

diff --git a/hw/max111x.c b/hw/max111x.c
deleted file mode 100644
index d477ecdb29..0000000000
--- a/hw/max111x.c
+++ /dev/null
@@ -1,193 +0,0 @@
-/*
- * Maxim MAX1110/1111 ADC chip emulation.
- *
- * Copyright (c) 2006 Openedhand Ltd.
- * Written by Andrzej Zaborowski <balrog@zabor.org>
- *
- * This code is licensed under the GNU GPLv2.
- *
- * Contributions after 2012-01-13 are licensed under the terms of the
- * GNU GPL, version 2 or (at your option) any later version.
- */
-
-#include "hw/ssi.h"
-
-typedef struct {
-    SSISlave ssidev;
-    qemu_irq interrupt;
-    uint8_t tb1, rb2, rb3;
-    int cycle;
-
-    uint8_t input[8];
-    int inputs, com;
-} MAX111xState;
-
-/* Control-byte bitfields */
-#define CB_PD0		(1 << 0)
-#define CB_PD1		(1 << 1)
-#define CB_SGL		(1 << 2)
-#define CB_UNI		(1 << 3)
-#define CB_SEL0		(1 << 4)
-#define CB_SEL1		(1 << 5)
-#define CB_SEL2		(1 << 6)
-#define CB_START	(1 << 7)
-
-#define CHANNEL_NUM(v, b0, b1, b2)	\
-			((((v) >> (2 + (b0))) & 4) |	\
-			 (((v) >> (3 + (b1))) & 2) |	\
-			 (((v) >> (4 + (b2))) & 1))
-
-static uint32_t max111x_read(MAX111xState *s)
-{
-    if (!s->tb1)
-        return 0;
-
-    switch (s->cycle ++) {
-    case 1:
-        return s->rb2;
-    case 2:
-        return s->rb3;
-    }
-
-    return 0;
-}
-
-/* Interpret a control-byte */
-static void max111x_write(MAX111xState *s, uint32_t value)
-{
-    int measure, chan;
-
-    /* Ignore the value if START bit is zero */
-    if (!(value & CB_START))
-        return;
-
-    s->cycle = 0;
-
-    if (!(value & CB_PD1)) {
-        s->tb1 = 0;
-        return;
-    }
-
-    s->tb1 = value;
-
-    if (s->inputs == 8)
-        chan = CHANNEL_NUM(value, 1, 0, 2);
-    else
-        chan = CHANNEL_NUM(value & ~CB_SEL0, 0, 1, 2);
-
-    if (value & CB_SGL)
-        measure = s->input[chan] - s->com;
-    else
-        measure = s->input[chan] - s->input[chan ^ 1];
-
-    if (!(value & CB_UNI))
-        measure ^= 0x80;
-
-    s->rb2 = (measure >> 2) & 0x3f;
-    s->rb3 = (measure << 6) & 0xc0;
-
-    /* FIXME: When should the IRQ be lowered?  */
-    qemu_irq_raise(s->interrupt);
-}
-
-static uint32_t max111x_transfer(SSISlave *dev, uint32_t value)
-{
-    MAX111xState *s = FROM_SSI_SLAVE(MAX111xState, dev);
-    max111x_write(s, value);
-    return max111x_read(s);
-}
-
-static const VMStateDescription vmstate_max111x = {
-    .name = "max111x",
-    .version_id = 1,
-    .minimum_version_id = 1,
-    .minimum_version_id_old = 1,
-    .fields      = (VMStateField[]) {
-        VMSTATE_SSI_SLAVE(ssidev, MAX111xState),
-        VMSTATE_UINT8(tb1, MAX111xState),
-        VMSTATE_UINT8(rb2, MAX111xState),
-        VMSTATE_UINT8(rb3, MAX111xState),
-        VMSTATE_INT32_EQUAL(inputs, MAX111xState),
-        VMSTATE_INT32(com, MAX111xState),
-        VMSTATE_ARRAY_INT32_UNSAFE(input, MAX111xState, inputs,
-                                   vmstate_info_uint8, uint8_t),
-        VMSTATE_END_OF_LIST()
-    }
-};
-
-static int max111x_init(SSISlave *dev, int inputs)
-{
-    MAX111xState *s = FROM_SSI_SLAVE(MAX111xState, dev);
-
-    qdev_init_gpio_out(&dev->qdev, &s->interrupt, 1);
-
-    s->inputs = inputs;
-    /* TODO: add a user interface for setting these */
-    s->input[0] = 0xf0;
-    s->input[1] = 0xe0;
-    s->input[2] = 0xd0;
-    s->input[3] = 0xc0;
-    s->input[4] = 0xb0;
-    s->input[5] = 0xa0;
-    s->input[6] = 0x90;
-    s->input[7] = 0x80;
-    s->com = 0;
-
-    vmstate_register(&dev->qdev, -1, &vmstate_max111x, s);
-    return 0;
-}
-
-static int max1110_init(SSISlave *dev)
-{
-    return max111x_init(dev, 8);
-}
-
-static int max1111_init(SSISlave *dev)
-{
-    return max111x_init(dev, 4);
-}
-
-void max111x_set_input(DeviceState *dev, int line, uint8_t value)
-{
-    MAX111xState *s = FROM_SSI_SLAVE(MAX111xState, SSI_SLAVE_FROM_QDEV(dev));
-    assert(line >= 0 && line < s->inputs);
-    s->input[line] = value;
-}
-
-static void max1110_class_init(ObjectClass *klass, void *data)
-{
-    SSISlaveClass *k = SSI_SLAVE_CLASS(klass);
-
-    k->init = max1110_init;
-    k->transfer = max111x_transfer;
-}
-
-static const TypeInfo max1110_info = {
-    .name          = "max1110",
-    .parent        = TYPE_SSI_SLAVE,
-    .instance_size = sizeof(MAX111xState),
-    .class_init    = max1110_class_init,
-};
-
-static void max1111_class_init(ObjectClass *klass, void *data)
-{
-    SSISlaveClass *k = SSI_SLAVE_CLASS(klass);
-
-    k->init = max1111_init;
-    k->transfer = max111x_transfer;
-}
-
-static const TypeInfo max1111_info = {
-    .name          = "max1111",
-    .parent        = TYPE_SSI_SLAVE,
-    .instance_size = sizeof(MAX111xState),
-    .class_init    = max1111_class_init,
-};
-
-static void max111x_register_types(void)
-{
-    type_register_static(&max1110_info);
-    type_register_static(&max1111_info);
-}
-
-type_init(max111x_register_types)