misc: add pca9552 LED blinker model

Specs are available here :

    https://www.nxp.com/docs/en/application-note/AN264.pdf

This is a simple model supporting the basic registers for led and GPIO
mode. The device also supports two blinking rates but not the model
yet.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180530064049.27976-7-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

1 files changed, 240 insertions, 0 deletions

diff --git a/hw/misc/pca9552.c b/hw/misc/pca9552.c
new file mode 100644
index 0000000000..9775d5274a
--- /dev/null
+++ b/hw/misc/pca9552.c
@@ -0,0 +1,240 @@
+/*
+ * PCA9552 I2C LED blinker
+ *
+ *     https://www.nxp.com/docs/en/application-note/AN264.pdf
+ *
+ * Copyright (c) 2017-2018, IBM Corporation.
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or
+ * later. See the COPYING file in the top-level directory.
+ */
+
+#include "qemu/osdep.h"
+#include "qemu/log.h"
+#include "hw/hw.h"
+#include "hw/misc/pca9552.h"
+#include "hw/misc/pca9552_regs.h"
+
+#define PCA9552_LED_ON   0x0
+#define PCA9552_LED_OFF  0x1
+#define PCA9552_LED_PWM0 0x2
+#define PCA9552_LED_PWM1 0x3
+
+static uint8_t pca9552_pin_get_config(PCA9552State *s, int pin)
+{
+    uint8_t reg   = PCA9552_LS0 + (pin / 4);
+    uint8_t shift = (pin % 4) << 1;
+
+    return extract32(s->regs[reg], shift, 2);
+}
+
+static void pca9552_update_pin_input(PCA9552State *s)
+{
+    int i;
+
+    for (i = 0; i < s->nr_leds; i++) {
+        uint8_t input_reg = PCA9552_INPUT0 + (i / 8);
+        uint8_t input_shift = (i % 8);
+        uint8_t config = pca9552_pin_get_config(s, i);
+
+        switch (config) {
+        case PCA9552_LED_ON:
+            s->regs[input_reg] |= 1 << input_shift;
+            break;
+        case PCA9552_LED_OFF:
+            s->regs[input_reg] &= ~(1 << input_shift);
+            break;
+        case PCA9552_LED_PWM0:
+        case PCA9552_LED_PWM1:
+            /* TODO */
+        default:
+            break;
+        }
+    }
+}
+
+static uint8_t pca9552_read(PCA9552State *s, uint8_t reg)
+{
+    switch (reg) {
+    case PCA9552_INPUT0:
+    case PCA9552_INPUT1:
+    case PCA9552_PSC0:
+    case PCA9552_PWM0:
+    case PCA9552_PSC1:
+    case PCA9552_PWM1:
+    case PCA9552_LS0:
+    case PCA9552_LS1:
+    case PCA9552_LS2:
+    case PCA9552_LS3:
+        return s->regs[reg];
+    default:
+        qemu_log_mask(LOG_GUEST_ERROR, "%s: unexpected read to register %d\n",
+                      __func__, reg);
+        return 0xFF;
+    }
+}
+
+static void pca9552_write(PCA9552State *s, uint8_t reg, uint8_t data)
+{
+    switch (reg) {
+    case PCA9552_PSC0:
+    case PCA9552_PWM0:
+    case PCA9552_PSC1:
+    case PCA9552_PWM1:
+        s->regs[reg] = data;
+        break;
+
+    case PCA9552_LS0:
+    case PCA9552_LS1:
+    case PCA9552_LS2:
+    case PCA9552_LS3:
+        s->regs[reg] = data;
+        pca9552_update_pin_input(s);
+        break;
+
+    case PCA9552_INPUT0:
+    case PCA9552_INPUT1:
+    default:
+        qemu_log_mask(LOG_GUEST_ERROR, "%s: unexpected write to register %d\n",
+                      __func__, reg);
+    }
+}
+
+/*
+ * When Auto-Increment is on, the register address is incremented
+ * after each byte is sent to or received by the device. The index
+ * rollovers to 0 when the maximum register address is reached.
+ */
+static void pca9552_autoinc(PCA9552State *s)
+{
+    if (s->pointer != 0xFF && s->pointer & PCA9552_AUTOINC) {
+        uint8_t reg = s->pointer & 0xf;
+
+        reg = (reg + 1) % (s->max_reg + 1);
+        s->pointer = reg | PCA9552_AUTOINC;
+    }
+}
+
+static int pca9552_recv(I2CSlave *i2c)
+{
+    PCA9552State *s = PCA9552(i2c);
+    uint8_t ret;
+
+    ret = pca9552_read(s, s->pointer & 0xf);
+
+    /*
+     * From the Specs:
+     *
+     *     Important Note: When a Read sequence is initiated and the
+     *     AI bit is set to Logic Level 1, the Read Sequence MUST
+     *     start by a register different from 0.
+     *
+     * I don't know what should be done in this case, so throw an
+     * error.
+     */
+    if (s->pointer == PCA9552_AUTOINC) {
+        qemu_log_mask(LOG_GUEST_ERROR,
+                      "%s: Autoincrement read starting with register 0\n",
+                      __func__);
+    }
+
+    pca9552_autoinc(s);
+
+    return ret;
+}
+
+static int pca9552_send(I2CSlave *i2c, uint8_t data)
+{
+    PCA9552State *s = PCA9552(i2c);
+
+    /* First byte sent by is the register address */
+    if (s->len == 0) {
+        s->pointer = data;
+        s->len++;
+    } else {
+        pca9552_write(s, s->pointer & 0xf, data);
+
+        pca9552_autoinc(s);
+    }
+
+    return 0;
+}
+
+static int pca9552_event(I2CSlave *i2c, enum i2c_event event)
+{
+    PCA9552State *s = PCA9552(i2c);
+
+    s->len = 0;
+    return 0;
+}
+
+static const VMStateDescription pca9552_vmstate = {
+    .name = "PCA9552",
+    .version_id = 0,
+    .minimum_version_id = 0,
+    .fields = (VMStateField[]) {
+        VMSTATE_UINT8(len, PCA9552State),
+        VMSTATE_UINT8(pointer, PCA9552State),
+        VMSTATE_UINT8_ARRAY(regs, PCA9552State, PCA9552_NR_REGS),
+        VMSTATE_I2C_SLAVE(i2c, PCA9552State),
+        VMSTATE_END_OF_LIST()
+    }
+};
+
+static void pca9552_reset(DeviceState *dev)
+{
+    PCA9552State *s = PCA9552(dev);
+
+    s->regs[PCA9552_PSC0] = 0xFF;
+    s->regs[PCA9552_PWM0] = 0x80;
+    s->regs[PCA9552_PSC1] = 0xFF;
+    s->regs[PCA9552_PWM1] = 0x80;
+    s->regs[PCA9552_LS0] = 0x55; /* all OFF */
+    s->regs[PCA9552_LS1] = 0x55;
+    s->regs[PCA9552_LS2] = 0x55;
+    s->regs[PCA9552_LS3] = 0x55;
+
+    pca9552_update_pin_input(s);
+
+    s->pointer = 0xFF;
+    s->len = 0;
+}
+
+static void pca9552_initfn(Object *obj)
+{
+    PCA9552State *s = PCA9552(obj);
+
+    /* If support for the other PCA955X devices are implemented, these
+     * constant values might be part of class structure describing the
+     * PCA955X device
+     */
+    s->max_reg = PCA9552_LS3;
+    s->nr_leds = 16;
+}
+
+static void pca9552_class_init(ObjectClass *klass, void *data)
+{
+    DeviceClass *dc = DEVICE_CLASS(klass);
+    I2CSlaveClass *k = I2C_SLAVE_CLASS(klass);
+
+    k->event = pca9552_event;
+    k->recv = pca9552_recv;
+    k->send = pca9552_send;
+    dc->reset = pca9552_reset;
+    dc->vmsd = &pca9552_vmstate;
+}
+
+static const TypeInfo pca9552_info = {
+    .name          = TYPE_PCA9552,
+    .parent        = TYPE_I2C_SLAVE,
+    .instance_init = pca9552_initfn,
+    .instance_size = sizeof(PCA9552State),
+    .class_init    = pca9552_class_init,
+};
+
+static void pca9552_register_types(void)
+{
+    type_register_static(&pca9552_info);
+}
+
+type_init(pca9552_register_types)