Merge tag 'hppa-fixes-8.2-pull-request' of https://github.com/hdeller/qemu-hppa into staging

target/hppa qemu v8.2 regression fixes

There were some regressions introduced with Qemu v8.2 on the hppa/hppa64
target, e.g.:

- 32-bit HP-UX crashes on B160L (32-bit) machine
- NetBSD boot failure due to power button in page zero
- NetBSD FPU detection failure
- OpenBSD 7.4 boot failure

This patch series fixes those known regressions and additionally:

- allows usage of the max. 3840MB of memory (instead of 3GB),
- adds support for the qemu --nodefaults option (to debug other devices)

This patch set will not fix those known (non-regression) bugs:
- HP-UX and NetBSD still fail to boot on the new 64-bit C3700 machine
- Linux kernel will still fail to boot on C3700 as long as kernel modules are used.

Changes v2->v3:
- Added comment about Figures H-10 and H-11 in the parisc2.0 spec
  in patch which calculate PDC address translation if PSW.W=0
- Introduce and use hppa_set_ior_and_isr()
- Use drive_get_max_bus(IF_SCSI), nd_table[] and serial_hd() to check
  if default devices should be created
- Added Tested-by and Reviewed-by tags

Changes v1->v2:
- fix OpenBSD boot with SeaBIOS v15 instead of v14
- commit message enhancements suggested by BALATON Zoltan
- use uint64_t for ram_max in patch #1

# -----BEGIN PGP SIGNATURE-----
#
# iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCZaImPQAKCRD3ErUQojoP
# X2C5AP9fbIkCni45JU6KC6OmFsCbAReRQCPwLO+MzR8/us2ywgD+PsGxSBk8ASxM
# nqtv3J9JC3i+XSnbtwLV+qChnO+IXwc=
# =FAMY
# -----END PGP SIGNATURE-----
# gpg: Signature made Sat 13 Jan 2024 05:57:17 GMT
# gpg:                using EDDSA key BCE9123E1AD29F07C049BBDEF712B510A23A0F5F
# gpg: Good signature from "Helge Deller <deller@gmx.de>" [unknown]
# gpg:                 aka "Helge Deller <deller@kernel.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 4544 8228 2CD9 10DB EF3D  25F8 3E5F 3D04 A7A2 4603
#      Subkey fingerprint: BCE9 123E 1AD2 9F07 C049  BBDE F712 B510 A23A 0F5F

* tag 'hppa-fixes-8.2-pull-request' of https://github.com/hdeller/qemu-hppa:
  target/hppa: Update SeaBIOS-hppa to version 15
  target/hppa: Fix IOR and ISR on error in probe
  target/hppa: Fix IOR and ISR on unaligned access trap
  target/hppa: Export function hppa_set_ior_and_isr()
  target/hppa: Avoid accessing %gr0 when raising exception
  hw/hppa: Move software power button address back into PDC
  target/hppa: Fix PDC address translation on PA2.0 with PSW.W=0
  hw/pci-host/astro: Add missing astro & elroy registers for NetBSD
  hw/hppa/machine: Disable default devices with --nodefaults option
  hw/hppa/machine: Allow up to 3840 MB total memory

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

1 files changed, 23 insertions, 3 deletions

diff --git a/hw/pci-host/astro.c b/hw/pci-host/astro.c
index f4de70475c..37d271118c 100644
--- a/hw/pci-host/astro.c
+++ b/hw/pci-host/astro.c
@@ -166,6 +166,8 @@ static MemTxResult elroy_chip_write_with_attrs(void *opaque, hwaddr addr,
     trace_elroy_write(addr, size, val);
 
     switch ((addr >> 3) << 3) {
+    case 0x000: /* PCI_ID & PCI_COMMAND_STATUS_REG */
+        break;
     case 0x080:
         put_val_in_int64(&s->arb_mask, addr, size, val);
         break;
@@ -175,6 +177,9 @@ static MemTxResult elroy_chip_write_with_attrs(void *opaque, hwaddr addr,
     case 0x200 ... 0x250 - 1:   /* LMMIO, GMMIO, WLMMIO, WGMMIO, ... */
         put_val_in_arrary(s->mmio_base, 0x200, addr, size, val);
         break;
+    case 0x300: /* ibase */
+    case 0x308: /* imask */
+        break;
     case 0x0680:
         put_val_in_int64(&s->error_config, addr, size, val);
         break;
@@ -538,6 +543,9 @@ static MemTxResult astro_chip_read_with_attrs(void *opaque, hwaddr addr,
     case 0x0030:        /* HP-UX 10.20 and 11.11 reads it. No idea. */
         val = -1;
         break;
+    case 0x0078:        /* NetBSD reads 0x78 ? */
+        val = -1;
+        break;
     case 0x0300 ... 0x03d8:     /* LMMIO_DIRECT0_BASE... */
         index = (addr - 0x300) / 8;
         val = s->ioc_ranges[index];
@@ -624,31 +632,43 @@ static MemTxResult astro_chip_write_with_attrs(void *opaque, hwaddr addr,
     case 0x10220:
     case 0x10230:        /* HP-UX 11.11 reads it. No idea. */
         break;
-    case 0x22108:        /* IOC STATUS_CONTROL */
-        put_val_in_int64(&s->ioc_status_ctrl, addr, size, val);
-        break;
     case 0x20200 ... 0x20240 - 1: /* IOC Rope0_Control ... */
         put_val_in_arrary(s->ioc_rope_control, 0x20200, addr, size, val);
         break;
     case 0x20040:        /* IOC Rope config */
+    case 0x22040:
         put_val_in_int64(&s->ioc_rope_config, addr, size, val);
         break;
     case 0x20300:
+    case 0x22300:
         put_val_in_int64(&s->tlb_ibase, addr, size, val);
         break;
     case 0x20308:
+    case 0x22308:
         put_val_in_int64(&s->tlb_imask, addr, size, val);
         break;
     case 0x20310:
+    case 0x22310:
         put_val_in_int64(&s->tlb_pcom, addr, size, val);
         /* TODO: flush iommu */
         break;
     case 0x20318:
+    case 0x22318:
         put_val_in_int64(&s->tlb_tcnfg, addr, size, val);
         break;
     case 0x20320:
+    case 0x22320:
         put_val_in_int64(&s->tlb_pdir_base, addr, size, val);
         break;
+    case 0x22000:       /* func_id */
+        break;
+    case 0x22008:       /* func_class */
+        break;
+    case 0x22050:       /* rope_debug */
+        break;
+    case 0x22108:        /* IOC STATUS_CONTROL */
+        put_val_in_int64(&s->ioc_status_ctrl, addr, size, val);
+        break;
     /*
      * empty placeholders for non-existent elroys, e.g.
      * func_class, pci config & data