Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging

acpi,pc,pci fixes and enhancements

Most changes here are hotplug related:

This merges hotplug infrastructure changes by Igor,
some acpi related fixes, and PC fixes.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Mon 10 Feb 2014 09:13:26 GMT using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg:                 aka "Michael S. Tsirkin <mst@redhat.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17  0970 C350 3912 AFBE 8E67
#      Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA  8A0D 281F 0DB8 D28D 5469

* remotes/mst/tags/for_upstream:
  ACPI: Remove commented-out code from HPET._CRS
  hw/pci: switch to a generic hotplug handling for PCIDevice
  pci/pcie: convert PCIE hotplug to use hotplug-handler API
  pci/shpc: convert SHPC hotplug to use hotplug-handler API
  acpi/piix4pm: convert ACPI PCI hotplug to use hotplug-handler API
  qdev:pci: refactor PCIDevice to use generic "hotpluggable" property
  hw/acpi: move typeinfo to the file end
  qdev: add "hotpluggable" property to Device
  qdev: add to BusState "hotplug-handler" link
  define hotplug interface
  loader: document that errno is set
  pc.c: better error message on initrd sizing failure
  pc_piix: enable legacy hotplug for Xen
  qtest: don't report signals if qtest driver enabled
  hw:piix4:acpi: reuse pcihp code for legacy PCI hotplug
  pcihp: remove unused AcpiPciHpPciStatus.device_present field
  pcihp: make pci_read() mmio calback compatible with legacy ACPI hotplug
  pcihp: make PCI hotplug mmio handlers indifferent to PCI_HOTPLUG_ADDR
  pcihp: replace enable|disable_device() with oneliners
  pcihp: reduce number of device check events

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

1 files changed, 77 insertions, 47 deletions

diff --git a/hw/pci/shpc.c b/hw/pci/shpc.c
index 576244b9f6..180faa7adb 100644
--- a/hw/pci/shpc.c
+++ b/hw/pci/shpc.c
@@ -7,6 +7,7 @@
 #include "hw/pci/pci.h"
 #include "hw/pci/pci_bus.h"
 #include "hw/pci/msi.h"
+#include "qapi/qmp/qerror.h"
 
 /* TODO: model power only and disabled slot states. */
 /* TODO: handle SERR and wakeups */
@@ -490,65 +491,93 @@ static const MemoryRegionOps shpc_mmio_ops = {
         .max_access_size = 4,
     },
 };
-
-static int shpc_device_hotplug(DeviceState *qdev, PCIDevice *affected_dev,
-                               PCIHotplugState hotplug_state)
+static void shpc_device_hotplug_common(PCIDevice *affected_dev, int *slot,
+                                       SHPCDevice *shpc, Error **errp)
 {
     int pci_slot = PCI_SLOT(affected_dev->devfn);
-    uint8_t state;
-    uint8_t led;
-    PCIDevice *d = DO_UPCAST(PCIDevice, qdev, qdev);
-    SHPCDevice *shpc = d->shpc;
-    int slot = SHPC_PCI_TO_IDX(pci_slot);
-    if (pci_slot < SHPC_IDX_TO_PCI(0) || slot >= shpc->nslots) {
-        error_report("Unsupported PCI slot %d for standard hotplug "
-                     "controller. Valid slots are between %d and %d.",
-                     pci_slot, SHPC_IDX_TO_PCI(0),
-                     SHPC_IDX_TO_PCI(shpc->nslots) - 1);
-        return -1;
+    *slot = SHPC_PCI_TO_IDX(pci_slot);
+
+    if (pci_slot < SHPC_IDX_TO_PCI(0) || *slot >= shpc->nslots) {
+        error_setg(errp, "Unsupported PCI slot %d for standard hotplug "
+                   "controller. Valid slots are between %d and %d.",
+                   pci_slot, SHPC_IDX_TO_PCI(0),
+                   SHPC_IDX_TO_PCI(shpc->nslots) - 1);
+        return;
+    }
+}
+
+void shpc_device_hotplug_cb(HotplugHandler *hotplug_dev, DeviceState *dev,
+                            Error **errp)
+{
+    Error *local_err = NULL;
+    PCIDevice *pci_hotplug_dev = PCI_DEVICE(hotplug_dev);
+    SHPCDevice *shpc = pci_hotplug_dev->shpc;
+    int slot;
+
+    shpc_device_hotplug_common(PCI_DEVICE(dev), &slot, shpc, &local_err);
+    if (local_err) {
+        error_propagate(errp, local_err);
+        return;
     }
+
     /* Don't send event when device is enabled during qemu machine creation:
      * it is present on boot, no hotplug event is necessary. We do send an
      * event when the device is disabled later. */
-    if (hotplug_state == PCI_COLDPLUG_ENABLED) {
+    if (!dev->hotplugged) {
         shpc_set_status(shpc, slot, 0, SHPC_SLOT_STATUS_MRL_OPEN);
         shpc_set_status(shpc, slot, SHPC_SLOT_STATUS_PRSNT_7_5W,
                         SHPC_SLOT_STATUS_PRSNT_MASK);
-        return 0;
+        return;
     }
-    if (hotplug_state == PCI_HOTPLUG_DISABLED) {
-        shpc->config[SHPC_SLOT_EVENT_LATCH(slot)] |= SHPC_SLOT_EVENT_BUTTON;
-        state = shpc_get_status(shpc, slot, SHPC_SLOT_STATE_MASK);
-        led = shpc_get_status(shpc, slot, SHPC_SLOT_PWR_LED_MASK);
-        if (state == SHPC_STATE_DISABLED && led == SHPC_LED_OFF) {
-            shpc_free_devices_in_slot(shpc, slot);
-            shpc_set_status(shpc, slot, 1, SHPC_SLOT_STATUS_MRL_OPEN);
-            shpc_set_status(shpc, slot, SHPC_SLOT_STATUS_PRSNT_EMPTY,
-                            SHPC_SLOT_STATUS_PRSNT_MASK);
-            shpc->config[SHPC_SLOT_EVENT_LATCH(slot)] |=
-                SHPC_SLOT_EVENT_MRL |
-                SHPC_SLOT_EVENT_PRESENCE;
-        }
+
+    /* This could be a cancellation of the previous removal.
+     * We check MRL state to figure out. */
+    if (shpc_get_status(shpc, slot, SHPC_SLOT_STATUS_MRL_OPEN)) {
+        shpc_set_status(shpc, slot, 0, SHPC_SLOT_STATUS_MRL_OPEN);
+        shpc_set_status(shpc, slot, SHPC_SLOT_STATUS_PRSNT_7_5W,
+                        SHPC_SLOT_STATUS_PRSNT_MASK);
+        shpc->config[SHPC_SLOT_EVENT_LATCH(slot)] |=
+            SHPC_SLOT_EVENT_BUTTON |
+            SHPC_SLOT_EVENT_MRL |
+            SHPC_SLOT_EVENT_PRESENCE;
     } else {
-        /* This could be a cancellation of the previous removal.
-         * We check MRL state to figure out. */
-        if (shpc_get_status(shpc, slot, SHPC_SLOT_STATUS_MRL_OPEN)) {
-            shpc_set_status(shpc, slot, 0, SHPC_SLOT_STATUS_MRL_OPEN);
-            shpc_set_status(shpc, slot, SHPC_SLOT_STATUS_PRSNT_7_5W,
-                            SHPC_SLOT_STATUS_PRSNT_MASK);
-            shpc->config[SHPC_SLOT_EVENT_LATCH(slot)] |=
-                SHPC_SLOT_EVENT_BUTTON |
-                SHPC_SLOT_EVENT_MRL |
-                SHPC_SLOT_EVENT_PRESENCE;
-        } else {
-            /* Press attention button to cancel removal */
-            shpc->config[SHPC_SLOT_EVENT_LATCH(slot)] |=
-                SHPC_SLOT_EVENT_BUTTON;
-        }
+        /* Press attention button to cancel removal */
+        shpc->config[SHPC_SLOT_EVENT_LATCH(slot)] |=
+            SHPC_SLOT_EVENT_BUTTON;
     }
     shpc_set_status(shpc, slot, 0, SHPC_SLOT_STATUS_66);
-    shpc_interrupt_update(d);
-    return 0;
+    shpc_interrupt_update(pci_hotplug_dev);
+}
+
+void shpc_device_hot_unplug_cb(HotplugHandler *hotplug_dev, DeviceState *dev,
+                               Error **errp)
+{
+    Error *local_err = NULL;
+    PCIDevice *pci_hotplug_dev = PCI_DEVICE(hotplug_dev);
+    SHPCDevice *shpc = pci_hotplug_dev->shpc;
+    uint8_t state;
+    uint8_t led;
+    int slot;
+
+    shpc_device_hotplug_common(PCI_DEVICE(dev), &slot, shpc, errp);
+    if (local_err) {
+        return;
+    }
+
+    shpc->config[SHPC_SLOT_EVENT_LATCH(slot)] |= SHPC_SLOT_EVENT_BUTTON;
+    state = shpc_get_status(shpc, slot, SHPC_SLOT_STATE_MASK);
+    led = shpc_get_status(shpc, slot, SHPC_SLOT_PWR_LED_MASK);
+    if (state == SHPC_STATE_DISABLED && led == SHPC_LED_OFF) {
+        shpc_free_devices_in_slot(shpc, slot);
+        shpc_set_status(shpc, slot, 1, SHPC_SLOT_STATUS_MRL_OPEN);
+        shpc_set_status(shpc, slot, SHPC_SLOT_STATUS_PRSNT_EMPTY,
+                        SHPC_SLOT_STATUS_PRSNT_MASK);
+        shpc->config[SHPC_SLOT_EVENT_LATCH(slot)] |=
+            SHPC_SLOT_EVENT_MRL |
+            SHPC_SLOT_EVENT_PRESENCE;
+    }
+    shpc_set_status(shpc, slot, 0, SHPC_SLOT_STATUS_66);
+    shpc_interrupt_update(pci_hotplug_dev);
 }
 
 /* Initialize the SHPC structure in bridge's BAR. */
@@ -616,7 +645,8 @@ int shpc_init(PCIDevice *d, PCIBus *sec_bus, MemoryRegion *bar, unsigned offset)
                           d, "shpc-mmio", SHPC_SIZEOF(d));
     shpc_cap_update_dword(d);
     memory_region_add_subregion(bar, offset, &shpc->mmio);
-    pci_bus_hotplug(sec_bus, shpc_device_hotplug, &d->qdev);
+
+    qbus_set_hotplug_handler(BUS(sec_bus), DEVICE(d), NULL);
 
     d->cap_present |= QEMU_PCI_CAP_SHPC;
     return 0;