arm: move files referencing CPU to hw/arm/

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

1 files changed, 0 insertions, 350 deletions

diff --git a/hw/pxa2xx_gpio.c b/hw/pxa2xx_gpio.c
deleted file mode 100644
index eef8411e86..0000000000
--- a/hw/pxa2xx_gpio.c
+++ /dev/null
@@ -1,350 +0,0 @@
-/*
- * Intel XScale PXA255/270 GPIO controller emulation.
- *
- * Copyright (c) 2006 Openedhand Ltd.
- * Written by Andrzej Zaborowski <balrog@zabor.org>
- *
- * This code is licensed under the GPL.
- */
-
-#include "hw/hw.h"
-#include "hw/sysbus.h"
-#include "hw/pxa.h"
-
-#define PXA2XX_GPIO_BANKS	4
-
-typedef struct PXA2xxGPIOInfo PXA2xxGPIOInfo;
-struct PXA2xxGPIOInfo {
-    SysBusDevice busdev;
-    MemoryRegion iomem;
-    qemu_irq irq0, irq1, irqX;
-    int lines;
-    int ncpu;
-    ARMCPU *cpu;
-
-    /* XXX: GNU C vectors are more suitable */
-    uint32_t ilevel[PXA2XX_GPIO_BANKS];
-    uint32_t olevel[PXA2XX_GPIO_BANKS];
-    uint32_t dir[PXA2XX_GPIO_BANKS];
-    uint32_t rising[PXA2XX_GPIO_BANKS];
-    uint32_t falling[PXA2XX_GPIO_BANKS];
-    uint32_t status[PXA2XX_GPIO_BANKS];
-    uint32_t gpsr[PXA2XX_GPIO_BANKS];
-    uint32_t gafr[PXA2XX_GPIO_BANKS * 2];
-
-    uint32_t prev_level[PXA2XX_GPIO_BANKS];
-    qemu_irq handler[PXA2XX_GPIO_BANKS * 32];
-    qemu_irq read_notify;
-};
-
-static struct {
-    enum {
-        GPIO_NONE,
-        GPLR,
-        GPSR,
-        GPCR,
-        GPDR,
-        GRER,
-        GFER,
-        GEDR,
-        GAFR_L,
-        GAFR_U,
-    } reg;
-    int bank;
-} pxa2xx_gpio_regs[0x200] = {
-    [0 ... 0x1ff] = { GPIO_NONE, 0 },
-#define PXA2XX_REG(reg, a0, a1, a2, a3)	\
-    [a0] = { reg, 0 }, [a1] = { reg, 1 }, [a2] = { reg, 2 }, [a3] = { reg, 3 },
-
-    PXA2XX_REG(GPLR, 0x000, 0x004, 0x008, 0x100)
-    PXA2XX_REG(GPSR, 0x018, 0x01c, 0x020, 0x118)
-    PXA2XX_REG(GPCR, 0x024, 0x028, 0x02c, 0x124)
-    PXA2XX_REG(GPDR, 0x00c, 0x010, 0x014, 0x10c)
-    PXA2XX_REG(GRER, 0x030, 0x034, 0x038, 0x130)
-    PXA2XX_REG(GFER, 0x03c, 0x040, 0x044, 0x13c)
-    PXA2XX_REG(GEDR, 0x048, 0x04c, 0x050, 0x148)
-    PXA2XX_REG(GAFR_L, 0x054, 0x05c, 0x064, 0x06c)
-    PXA2XX_REG(GAFR_U, 0x058, 0x060, 0x068, 0x070)
-};
-
-static void pxa2xx_gpio_irq_update(PXA2xxGPIOInfo *s)
-{
-    if (s->status[0] & (1 << 0))
-        qemu_irq_raise(s->irq0);
-    else
-        qemu_irq_lower(s->irq0);
-
-    if (s->status[0] & (1 << 1))
-        qemu_irq_raise(s->irq1);
-    else
-        qemu_irq_lower(s->irq1);
-
-    if ((s->status[0] & ~3) | s->status[1] | s->status[2] | s->status[3])
-        qemu_irq_raise(s->irqX);
-    else
-        qemu_irq_lower(s->irqX);
-}
-
-/* Bitmap of pins used as standby and sleep wake-up sources.  */
-static const int pxa2xx_gpio_wake[PXA2XX_GPIO_BANKS] = {
-    0x8003fe1b, 0x002001fc, 0xec080000, 0x0012007f,
-};
-
-static void pxa2xx_gpio_set(void *opaque, int line, int level)
-{
-    PXA2xxGPIOInfo *s = (PXA2xxGPIOInfo *) opaque;
-    int bank;
-    uint32_t mask;
-
-    if (line >= s->lines) {
-        printf("%s: No GPIO pin %i\n", __FUNCTION__, line);
-        return;
-    }
-
-    bank = line >> 5;
-    mask = 1 << (line & 31);
-
-    if (level) {
-        s->status[bank] |= s->rising[bank] & mask &
-                ~s->ilevel[bank] & ~s->dir[bank];
-        s->ilevel[bank] |= mask;
-    } else {
-        s->status[bank] |= s->falling[bank] & mask &
-                s->ilevel[bank] & ~s->dir[bank];
-        s->ilevel[bank] &= ~mask;
-    }
-
-    if (s->status[bank] & mask)
-        pxa2xx_gpio_irq_update(s);
-
-    /* Wake-up GPIOs */
-    if (s->cpu->env.halted && (mask & ~s->dir[bank] & pxa2xx_gpio_wake[bank])) {
-        cpu_interrupt(&s->cpu->env, CPU_INTERRUPT_EXITTB);
-    }
-}
-
-static void pxa2xx_gpio_handler_update(PXA2xxGPIOInfo *s) {
-    uint32_t level, diff;
-    int i, bit, line;
-    for (i = 0; i < PXA2XX_GPIO_BANKS; i ++) {
-        level = s->olevel[i] & s->dir[i];
-
-        for (diff = s->prev_level[i] ^ level; diff; diff ^= 1 << bit) {
-            bit = ffs(diff) - 1;
-            line = bit + 32 * i;
-            qemu_set_irq(s->handler[line], (level >> bit) & 1);
-        }
-
-        s->prev_level[i] = level;
-    }
-}
-
-static uint64_t pxa2xx_gpio_read(void *opaque, hwaddr offset,
-                                 unsigned size)
-{
-    PXA2xxGPIOInfo *s = (PXA2xxGPIOInfo *) opaque;
-    uint32_t ret;
-    int bank;
-    if (offset >= 0x200)
-        return 0;
-
-    bank = pxa2xx_gpio_regs[offset].bank;
-    switch (pxa2xx_gpio_regs[offset].reg) {
-    case GPDR:		/* GPIO Pin-Direction registers */
-        return s->dir[bank];
-
-    case GPSR:		/* GPIO Pin-Output Set registers */
-        printf("%s: Read from a write-only register " REG_FMT "\n",
-                        __FUNCTION__, offset);
-        return s->gpsr[bank];	/* Return last written value.  */
-
-    case GPCR:		/* GPIO Pin-Output Clear registers */
-        printf("%s: Read from a write-only register " REG_FMT "\n",
-                        __FUNCTION__, offset);
-        return 31337;		/* Specified as unpredictable in the docs.  */
-
-    case GRER:		/* GPIO Rising-Edge Detect Enable registers */
-        return s->rising[bank];
-
-    case GFER:		/* GPIO Falling-Edge Detect Enable registers */
-        return s->falling[bank];
-
-    case GAFR_L:	/* GPIO Alternate Function registers */
-        return s->gafr[bank * 2];
-
-    case GAFR_U:	/* GPIO Alternate Function registers */
-        return s->gafr[bank * 2 + 1];
-
-    case GPLR:		/* GPIO Pin-Level registers */
-        ret = (s->olevel[bank] & s->dir[bank]) |
-                (s->ilevel[bank] & ~s->dir[bank]);
-        qemu_irq_raise(s->read_notify);
-        return ret;
-
-    case GEDR:		/* GPIO Edge Detect Status registers */
-        return s->status[bank];
-
-    default:
-        hw_error("%s: Bad offset " REG_FMT "\n", __FUNCTION__, offset);
-    }
-
-    return 0;
-}
-
-static void pxa2xx_gpio_write(void *opaque, hwaddr offset,
-                              uint64_t value, unsigned size)
-{
-    PXA2xxGPIOInfo *s = (PXA2xxGPIOInfo *) opaque;
-    int bank;
-    if (offset >= 0x200)
-        return;
-
-    bank = pxa2xx_gpio_regs[offset].bank;
-    switch (pxa2xx_gpio_regs[offset].reg) {
-    case GPDR:		/* GPIO Pin-Direction registers */
-        s->dir[bank] = value;
-        pxa2xx_gpio_handler_update(s);
-        break;
-
-    case GPSR:		/* GPIO Pin-Output Set registers */
-        s->olevel[bank] |= value;
-        pxa2xx_gpio_handler_update(s);
-        s->gpsr[bank] = value;
-        break;
-
-    case GPCR:		/* GPIO Pin-Output Clear registers */
-        s->olevel[bank] &= ~value;
-        pxa2xx_gpio_handler_update(s);
-        break;
-
-    case GRER:		/* GPIO Rising-Edge Detect Enable registers */
-        s->rising[bank] = value;
-        break;
-
-    case GFER:		/* GPIO Falling-Edge Detect Enable registers */
-        s->falling[bank] = value;
-        break;
-
-    case GAFR_L:	/* GPIO Alternate Function registers */
-        s->gafr[bank * 2] = value;
-        break;
-
-    case GAFR_U:	/* GPIO Alternate Function registers */
-        s->gafr[bank * 2 + 1] = value;
-        break;
-
-    case GEDR:		/* GPIO Edge Detect Status registers */
-        s->status[bank] &= ~value;
-        pxa2xx_gpio_irq_update(s);
-        break;
-
-    default:
-        hw_error("%s: Bad offset " REG_FMT "\n", __FUNCTION__, offset);
-    }
-}
-
-static const MemoryRegionOps pxa_gpio_ops = {
-    .read = pxa2xx_gpio_read,
-    .write = pxa2xx_gpio_write,
-    .endianness = DEVICE_NATIVE_ENDIAN,
-};
-
-DeviceState *pxa2xx_gpio_init(hwaddr base,
-                              ARMCPU *cpu, DeviceState *pic, int lines)
-{
-    CPUState *cs = CPU(cpu);
-    DeviceState *dev;
-
-    dev = qdev_create(NULL, "pxa2xx-gpio");
-    qdev_prop_set_int32(dev, "lines", lines);
-    qdev_prop_set_int32(dev, "ncpu", cs->cpu_index);
-    qdev_init_nofail(dev);
-
-    sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, base);
-    sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0,
-                    qdev_get_gpio_in(pic, PXA2XX_PIC_GPIO_0));
-    sysbus_connect_irq(SYS_BUS_DEVICE(dev), 1,
-                    qdev_get_gpio_in(pic, PXA2XX_PIC_GPIO_1));
-    sysbus_connect_irq(SYS_BUS_DEVICE(dev), 2,
-                    qdev_get_gpio_in(pic, PXA2XX_PIC_GPIO_X));
-
-    return dev;
-}
-
-static int pxa2xx_gpio_initfn(SysBusDevice *dev)
-{
-    PXA2xxGPIOInfo *s;
-
-    s = FROM_SYSBUS(PXA2xxGPIOInfo, dev);
-
-    s->cpu = ARM_CPU(qemu_get_cpu(s->ncpu));
-
-    qdev_init_gpio_in(&dev->qdev, pxa2xx_gpio_set, s->lines);
-    qdev_init_gpio_out(&dev->qdev, s->handler, s->lines);
-
-    memory_region_init_io(&s->iomem, &pxa_gpio_ops, s, "pxa2xx-gpio", 0x1000);
-    sysbus_init_mmio(dev, &s->iomem);
-    sysbus_init_irq(dev, &s->irq0);
-    sysbus_init_irq(dev, &s->irq1);
-    sysbus_init_irq(dev, &s->irqX);
-
-    return 0;
-}
-
-/*
- * Registers a callback to notify on GPLR reads.  This normally
- * shouldn't be needed but it is used for the hack on Spitz machines.
- */
-void pxa2xx_gpio_read_notifier(DeviceState *dev, qemu_irq handler)
-{
-    PXA2xxGPIOInfo *s = FROM_SYSBUS(PXA2xxGPIOInfo, SYS_BUS_DEVICE(dev));
-    s->read_notify = handler;
-}
-
-static const VMStateDescription vmstate_pxa2xx_gpio_regs = {
-    .name = "pxa2xx-gpio",
-    .version_id = 1,
-    .minimum_version_id = 1,
-    .minimum_version_id_old = 1,
-    .fields = (VMStateField []) {
-        VMSTATE_INT32(lines, PXA2xxGPIOInfo),
-        VMSTATE_UINT32_ARRAY(ilevel, PXA2xxGPIOInfo, PXA2XX_GPIO_BANKS),
-        VMSTATE_UINT32_ARRAY(olevel, PXA2xxGPIOInfo, PXA2XX_GPIO_BANKS),
-        VMSTATE_UINT32_ARRAY(dir, PXA2xxGPIOInfo, PXA2XX_GPIO_BANKS),
-        VMSTATE_UINT32_ARRAY(rising, PXA2xxGPIOInfo, PXA2XX_GPIO_BANKS),
-        VMSTATE_UINT32_ARRAY(falling, PXA2xxGPIOInfo, PXA2XX_GPIO_BANKS),
-        VMSTATE_UINT32_ARRAY(status, PXA2xxGPIOInfo, PXA2XX_GPIO_BANKS),
-        VMSTATE_UINT32_ARRAY(gafr, PXA2xxGPIOInfo, PXA2XX_GPIO_BANKS * 2),
-        VMSTATE_END_OF_LIST(),
-    },
-};
-
-static Property pxa2xx_gpio_properties[] = {
-    DEFINE_PROP_INT32("lines", PXA2xxGPIOInfo, lines, 0),
-    DEFINE_PROP_INT32("ncpu", PXA2xxGPIOInfo, ncpu, 0),
-    DEFINE_PROP_END_OF_LIST(),
-};
-
-static void pxa2xx_gpio_class_init(ObjectClass *klass, void *data)
-{
-    DeviceClass *dc = DEVICE_CLASS(klass);
-    SysBusDeviceClass *k = SYS_BUS_DEVICE_CLASS(klass);
-
-    k->init = pxa2xx_gpio_initfn;
-    dc->desc = "PXA2xx GPIO controller";
-    dc->props = pxa2xx_gpio_properties;
-}
-
-static const TypeInfo pxa2xx_gpio_info = {
-    .name          = "pxa2xx-gpio",
-    .parent        = TYPE_SYS_BUS_DEVICE,
-    .instance_size = sizeof(PXA2xxGPIOInfo),
-    .class_init    = pxa2xx_gpio_class_init,
-};
-
-static void pxa2xx_gpio_register_types(void)
-{
-    type_register_static(&pxa2xx_gpio_info);
-}
-
-type_init(pxa2xx_gpio_register_types)