Merge tag 'pull-target-arm-20240305' of https://git.linaro.org/people/pmaydell/qemu-arm into staging

target-arm queue:
 * raspi: Implement Broadcom Serial Controller (BSC) for BCM2835 boards
 * hw/char/pl011: Add support for loopback
 * STM32L4x5: Implement RCC clock control device
 * target/arm: Do memory type alignment checks
 * atomic.h: Reword confusing comment for qatomic_cmpxchg
 * qemu-options.hx: Don't claim "-serial" has limit of 4 serial ports

# -----BEGIN PGP SIGNATURE-----
#
# iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAmXnI4gZHHBldGVyLm1h
# eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3p5ED/wOtAHA3PK+WbQhVhnji3+k
# gdhvVcldf+HLaI2v4tfaW152xjY80/j3PQFNkzptoXENA9U51F47oNYOIfULLZZX
# FTKmw/mjTBc2LqJ8gLpS8Wkr/PFtDq9JJzDwZd0MwguXpzIJp31JJpESvXlAqjjv
# FhuAcqNNuGwI2SXCBmp2lPoEMn8ExLDoG9rmzjxVZeZCyzUjVnJYM61ykhC4ByvK
# j5+/a7pUcpgHSX5cbq7kFloPOx3JXI5lS6xUKhGXXk75qHRwiQIsxMcPq8PD1+ok
# yrmp7cySwK8I7AlIPdDjpJmhU0OiBu+PkYiXmHlF2nvaUy6M0nVX2lSTzqj6VpVV
# 7yYhvWXHrtIA9AUspqTRsX7tP7iMJkco7qWfKSzYl+3pTbxS4+rEoee4jNR3hqsU
# lbWC47sNVtTN507qIL1dcsu+BaeSsYVftfxtFql3odTqRB+ticsjDfKg69dRSFyk
# SS0t8Zy3TdomcEoQkAv/ZSpkQnQUGavbRumCG58lJdiTwTuJUmGi1ufKBrD/GeKj
# IlDEl9yvKiR8uvdjj6EQqr5kOj09mmN5nvokNsq5a4aNXBYoesszWK2xodzXE2x5
# M9DHJ3S8xnN++p1idS2bikwEklG1XVQ/q52bDXQkUmQSNerVS1PCvg9hzYqA+x53
# ihJtMcsmGVfxY8aQHyHweA==
# =isAe
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 05 Mar 2024 13:52:08 GMT
# gpg:                using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg:                issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg:                 aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg:                 aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# gpg:                 aka "Peter Maydell <peter@archaic.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83  15CF 3C25 25ED 1436 0CDE

* tag 'pull-target-arm-20240305' of https://git.linaro.org/people/pmaydell/qemu-arm:
  qemu-options.hx: Don't claim "-serial" has limit of 4 serial ports
  atomic.h: Reword confusing comment for qatomic_cmpxchg
  target/arm: Do memory type alignment check when translation enabled
  target/arm: Do memory type alignment check when translation disabled
  accel/tcg: Add TLB_CHECK_ALIGNED
  accel/tcg: Add tlb_fill_flags to CPUTLBEntryFull
  exec/memattrs: Remove target_tlb_bit*
  target/arm: Support 32-byte alignment in pow2_align
  tests/qtest/stm32l4x5_rcc-test.c: Add tests for the STM32L4x5_RCC
  hw/arm/stm32l4x5_soc.c: Use the RCC Sysclk
  hw/misc/stm32l4x5_rcc: Add write protections to CR register
  hw/misc/stm32l4x5_rcc: Handle Register Updates
  hw/misc/stm32l4x5_rcc: Initialize PLLs and clock multiplexers
  hw/misc/stm32l4x5_rcc: Add an internal PLL Clock object
  hw/misc/stm32l4x5_rcc: Add an internal clock multiplexer object
  hw/misc/stm32l4x5_rcc: Implement STM32L4x5_RCC skeleton
  hw/char/pl011: Add support for loopback
  tests/qtest: Add testcase for BCM2835 BSC
  hw/arm: Connect BSC to BCM2835 board as I2C0, I2C1 and I2C2
  hw/i2c: Implement Broadcom Serial Controller (BSC)

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

1 files changed, 239 insertions, 0 deletions

diff --git a/include/hw/misc/stm32l4x5_rcc.h b/include/hw/misc/stm32l4x5_rcc.h
new file mode 100644
index 0000000000..0fbfba5c40
--- /dev/null
+++ b/include/hw/misc/stm32l4x5_rcc.h
@@ -0,0 +1,239 @@
+/*
+ * STM32L4X5 RCC (Reset and clock control)
+ *
+ * Copyright (c) 2023 Arnaud Minier <arnaud.minier@telecom-paris.fr>
+ * Copyright (c) 2023 Inès Varhol <ines.varhol@telecom-paris.fr>
+ *
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or later.
+ * See the COPYING file in the top-level directory.
+ *
+ * The reference used is the STMicroElectronics RM0351 Reference manual
+ * for STM32L4x5 and STM32L4x6 advanced Arm ® -based 32-bit MCUs.
+ *
+ * Inspired by the BCM2835 CPRMAN clock manager by Luc Michel.
+ */
+
+#ifndef HW_STM32L4X5_RCC_H
+#define HW_STM32L4X5_RCC_H
+
+#include "hw/sysbus.h"
+#include "qom/object.h"
+
+#define TYPE_STM32L4X5_RCC "stm32l4x5-rcc"
+OBJECT_DECLARE_SIMPLE_TYPE(Stm32l4x5RccState, STM32L4X5_RCC)
+
+/* In the Stm32l4x5 clock tree, mux have at most 7 sources */
+#define RCC_NUM_CLOCK_MUX_SRC 7
+
+typedef enum PllCommonChannels {
+    RCC_PLL_COMMON_CHANNEL_P = 0,
+    RCC_PLL_COMMON_CHANNEL_Q = 1,
+    RCC_PLL_COMMON_CHANNEL_R = 2,
+
+    RCC_NUM_CHANNEL_PLL_OUT = 3
+} PllCommonChannels;
+
+/* NB: Prescaler are assimilated to mux with one source and one output */
+typedef enum RccClockMux {
+    /* Internal muxes that arent't exposed publicly to other peripherals */
+    RCC_CLOCK_MUX_SYSCLK,
+    RCC_CLOCK_MUX_PLL_INPUT,
+    RCC_CLOCK_MUX_HCLK,
+    RCC_CLOCK_MUX_PCLK1,
+    RCC_CLOCK_MUX_PCLK2,
+    RCC_CLOCK_MUX_HSE_OVER_32,
+    RCC_CLOCK_MUX_LCD_AND_RTC_COMMON,
+
+    /* Muxes with a publicly available output */
+    RCC_CLOCK_MUX_CORTEX_REFCLK,
+    RCC_CLOCK_MUX_USART1,
+    RCC_CLOCK_MUX_USART2,
+    RCC_CLOCK_MUX_USART3,
+    RCC_CLOCK_MUX_UART4,
+    RCC_CLOCK_MUX_UART5,
+    RCC_CLOCK_MUX_LPUART1,
+    RCC_CLOCK_MUX_I2C1,
+    RCC_CLOCK_MUX_I2C2,
+    RCC_CLOCK_MUX_I2C3,
+    RCC_CLOCK_MUX_LPTIM1,
+    RCC_CLOCK_MUX_LPTIM2,
+    RCC_CLOCK_MUX_SWPMI1,
+    RCC_CLOCK_MUX_MCO,
+    RCC_CLOCK_MUX_LSCO,
+    RCC_CLOCK_MUX_DFSDM1,
+    RCC_CLOCK_MUX_ADC,
+    RCC_CLOCK_MUX_CLK48,
+    RCC_CLOCK_MUX_SAI1,
+    RCC_CLOCK_MUX_SAI2,
+
+    /*
+     * Mux that have only one input and one output assigned to as peripheral.
+     * They could be direct lines but it is simpler
+     * to use the same logic for all outputs.
+     */
+    /* - AHB1 */
+    RCC_CLOCK_MUX_TSC,
+    RCC_CLOCK_MUX_CRC,
+    RCC_CLOCK_MUX_FLASH,
+    RCC_CLOCK_MUX_DMA2,
+    RCC_CLOCK_MUX_DMA1,
+
+    /* - AHB2 */
+    RCC_CLOCK_MUX_RNG,
+    RCC_CLOCK_MUX_AES,
+    RCC_CLOCK_MUX_OTGFS,
+    RCC_CLOCK_MUX_GPIOA,
+    RCC_CLOCK_MUX_GPIOB,
+    RCC_CLOCK_MUX_GPIOC,
+    RCC_CLOCK_MUX_GPIOD,
+    RCC_CLOCK_MUX_GPIOE,
+    RCC_CLOCK_MUX_GPIOF,
+    RCC_CLOCK_MUX_GPIOG,
+    RCC_CLOCK_MUX_GPIOH,
+
+    /* - AHB3 */
+    RCC_CLOCK_MUX_QSPI,
+    RCC_CLOCK_MUX_FMC,
+
+    /* - APB1 */
+    RCC_CLOCK_MUX_OPAMP,
+    RCC_CLOCK_MUX_DAC1,
+    RCC_CLOCK_MUX_PWR,
+    RCC_CLOCK_MUX_CAN1,
+    RCC_CLOCK_MUX_SPI3,
+    RCC_CLOCK_MUX_SPI2,
+    RCC_CLOCK_MUX_WWDG,
+    RCC_CLOCK_MUX_LCD,
+    RCC_CLOCK_MUX_TIM7,
+    RCC_CLOCK_MUX_TIM6,
+    RCC_CLOCK_MUX_TIM5,
+    RCC_CLOCK_MUX_TIM4,
+    RCC_CLOCK_MUX_TIM3,
+    RCC_CLOCK_MUX_TIM2,
+
+    /* - APB2 */
+    RCC_CLOCK_MUX_TIM17,
+    RCC_CLOCK_MUX_TIM16,
+    RCC_CLOCK_MUX_TIM15,
+    RCC_CLOCK_MUX_TIM8,
+    RCC_CLOCK_MUX_SPI1,
+    RCC_CLOCK_MUX_TIM1,
+    RCC_CLOCK_MUX_SDMMC1,
+    RCC_CLOCK_MUX_FW,
+    RCC_CLOCK_MUX_SYSCFG,
+
+    /* - BDCR */
+    RCC_CLOCK_MUX_RTC,
+
+    /* - OTHER */
+    RCC_CLOCK_MUX_CORTEX_FCLK,
+
+    RCC_NUM_CLOCK_MUX
+} RccClockMux;
+
+typedef enum RccPll {
+    RCC_PLL_PLL,
+    RCC_PLL_PLLSAI1,
+    RCC_PLL_PLLSAI2,
+
+    RCC_NUM_PLL
+} RccPll;
+
+typedef struct RccClockMuxState {
+    DeviceState parent_obj;
+
+    RccClockMux id;
+    Clock *srcs[RCC_NUM_CLOCK_MUX_SRC];
+    Clock *out;
+    bool enabled;
+    uint32_t src;
+    uint32_t multiplier;
+    uint32_t divider;
+
+    /*
+     * Used by clock srcs update callback to retrieve both the clock and the
+     * source number.
+     */
+    struct RccClockMuxState *backref[RCC_NUM_CLOCK_MUX_SRC];
+} RccClockMuxState;
+
+typedef struct RccPllState {
+    DeviceState parent_obj;
+
+    RccPll id;
+    Clock *in;
+    uint32_t vco_multiplier;
+    Clock *channels[RCC_NUM_CHANNEL_PLL_OUT];
+    /* Global pll enabled flag */
+    bool enabled;
+    /* 'enabled' refers to the runtime configuration */
+    bool channel_enabled[RCC_NUM_CHANNEL_PLL_OUT];
+    /*
+     * 'exists' refers to the physical configuration
+     * It should only be set at pll initialization.
+     * e.g. pllsai2 doesn't have a Q output.
+     */
+    bool channel_exists[RCC_NUM_CHANNEL_PLL_OUT];
+    uint32_t channel_divider[RCC_NUM_CHANNEL_PLL_OUT];
+} RccPllState;
+
+struct Stm32l4x5RccState {
+    SysBusDevice parent_obj;
+
+    MemoryRegion mmio;
+
+    uint32_t cr;
+    uint32_t icscr;
+    uint32_t cfgr;
+    uint32_t pllcfgr;
+    uint32_t pllsai1cfgr;
+    uint32_t pllsai2cfgr;
+    uint32_t cier;
+    uint32_t cifr;
+    uint32_t ahb1rstr;
+    uint32_t ahb2rstr;
+    uint32_t ahb3rstr;
+    uint32_t apb1rstr1;
+    uint32_t apb1rstr2;
+    uint32_t apb2rstr;
+    uint32_t ahb1enr;
+    uint32_t ahb2enr;
+    uint32_t ahb3enr;
+    uint32_t apb1enr1;
+    uint32_t apb1enr2;
+    uint32_t apb2enr;
+    uint32_t ahb1smenr;
+    uint32_t ahb2smenr;
+    uint32_t ahb3smenr;
+    uint32_t apb1smenr1;
+    uint32_t apb1smenr2;
+    uint32_t apb2smenr;
+    uint32_t ccipr;
+    uint32_t bdcr;
+    uint32_t csr;
+
+    /* Clock sources */
+    Clock *gnd;
+    Clock *hsi16_rc;
+    Clock *msi_rc;
+    Clock *hse;
+    Clock *lsi_rc;
+    Clock *lse_crystal;
+    Clock *sai1_extclk;
+    Clock *sai2_extclk;
+
+    /* PLLs */
+    RccPllState plls[RCC_NUM_PLL];
+
+    /* Muxes ~= outputs */
+    RccClockMuxState clock_muxes[RCC_NUM_CLOCK_MUX];
+
+    qemu_irq irq;
+    uint64_t hse_frequency;
+    uint64_t sai1_extclk_frequency;
+    uint64_t sai2_extclk_frequency;
+};
+
+#endif /* HW_STM32L4X5_RCC_H */