ppc/pnv: Add a XIVE2 controller to the POWER10 chip

The XIVE2 interrupt controller of the POWER10 processor follows the
same logic than on POWER9 but the HW interface has been largely
reviewed.  It has a new register interface, different BARs, extra
VSDs, new layout for the XIVE2 structures, and a set of new features
which are described below.

This is a model of the POWER10 XIVE2 interrupt controller for the
PowerNV machine. It focuses primarily on the needs of the skiboot
firmware but some initial hypervisor support is implemented for KVM
use (escalation).

Support for new features will be implemented in time and will require
new support from the OS.

* XIVE2 BARS

The interrupt controller BARs have a different layout outlined below.
Each sub-engine has now own its range and the indirect TIMA access was
replaced with a set of pages, one per CPU, under the IC BAR:

  - IC BAR (Interrupt Controller)
    . 4 pages, one per sub-engine
    . 128 indirect TIMA pages
  - TM BAR (Thread Interrupt Management Area)
    . 4 pages
  - ESB BAR (ESB pages for IPIs)
    . up to 1TB
  - END BAR (ESB pages for ENDs)
    . up to 2TB
  - NVC BAR (Notification Virtual Crowd)
    . up to 128
  - NVPG BAR (Notification Virtual Process and Group)
    . up to 1TB
  - Direct mapped Thread Context Area (reads & writes)

OPAL does not use the grouping and crowd capability.

* Virtual Structure Tables

XIVE2 adds new tables types and also changes the field layout of the END
and NVP Virtualization Structure Descriptors.

  - EAS
  - END new layout
  - NVT was splitted in :
    . NVP (Processor), 32B
    . NVG (Group), 32B
    . NVC (Crowd == P9 block group) 32B
  - IC for remote configuration
  - SYNC for cache injection
  - ERQ for event input queue

The setup is slighly different on XIVE2 because the indexing has changed
for some of the tables, block ID or the chip topology ID can be used.

* XIVE2 features

SCOM and MMIO registers have a new layout and XIVE2 adds a new global
capability and configuration registers.

The lowlevel hardware offers a set of new features among which :

  - a configurable number of priorities : 1 - 8
  - StoreEOI with load-after-store ordering is activated by default
  - Gen2 TIMA layout
  - A P9-compat mode, or Gen1, TIMA toggle bit for SW compatibility
  - increase to 24bit for VP number

Other features will have some impact on the Hypervisor and guest OS
when activated, but this is not required for initial support of the
controller.

Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>

3 files changed, 96 insertions, 0 deletions

diff --git a/include/hw/ppc/pnv.h b/include/hw/ppc/pnv.h
index 0e9e16544f..6b3457b449 100644
--- a/include/hw/ppc/pnv.h
+++ b/include/hw/ppc/pnv.h
@@ -125,10 +125,14 @@ struct Pnv10Chip {
     PnvChip      parent_obj;
 
     /*< public >*/
+    PnvXive2     xive;
     Pnv9Psi      psi;
     PnvLpcController lpc;
 };
 
+#define PNV10_PIR2FUSEDCORE(pir) (((pir) >> 3) & 0xf)
+#define PNV10_PIR2CHIP(pir)      (((pir) >> 8) & 0x7f)
+
 struct PnvChipClass {
     /*< private >*/
     SysBusDeviceClass parent_class;
@@ -329,10 +333,28 @@ void pnv_bmc_set_pnor(IPMIBmc *bmc, PnvPnor *pnor);
 #define PNV10_LPCM_SIZE             0x0000000100000000ull
 #define PNV10_LPCM_BASE(chip)       PNV10_CHIP_BASE(chip, 0x0006030000000000ull)
 
+#define PNV10_XIVE2_IC_SIZE         0x0000000002000000ull
+#define PNV10_XIVE2_IC_BASE(chip)   PNV10_CHIP_BASE(chip, 0x0006030200000000ull)
+
 #define PNV10_PSIHB_ESB_SIZE        0x0000000000100000ull
 #define PNV10_PSIHB_ESB_BASE(chip)  PNV10_CHIP_BASE(chip, 0x0006030202000000ull)
 
 #define PNV10_PSIHB_SIZE            0x0000000000100000ull
 #define PNV10_PSIHB_BASE(chip)      PNV10_CHIP_BASE(chip, 0x0006030203000000ull)
 
+#define PNV10_XIVE2_TM_SIZE         0x0000000000040000ull
+#define PNV10_XIVE2_TM_BASE(chip)   PNV10_CHIP_BASE(chip, 0x0006030203180000ull)
+
+#define PNV10_XIVE2_NVC_SIZE        0x0000000008000000ull
+#define PNV10_XIVE2_NVC_BASE(chip)  PNV10_CHIP_BASE(chip, 0x0006030208000000ull)
+
+#define PNV10_XIVE2_NVPG_SIZE       0x0000010000000000ull
+#define PNV10_XIVE2_NVPG_BASE(chip) PNV10_CHIP_BASE(chip, 0x0006040000000000ull)
+
+#define PNV10_XIVE2_ESB_SIZE        0x0000010000000000ull
+#define PNV10_XIVE2_ESB_BASE(chip)  PNV10_CHIP_BASE(chip, 0x0006050000000000ull)
+
+#define PNV10_XIVE2_END_SIZE        0x0000020000000000ull
+#define PNV10_XIVE2_END_BASE(chip)  PNV10_CHIP_BASE(chip, 0x0006060000000000ull)
+
 #endif /* PPC_PNV_H */
diff --git a/include/hw/ppc/pnv_xive.h b/include/hw/ppc/pnv_xive.h
index 7928e27963..b5d91505e5 100644
--- a/include/hw/ppc/pnv_xive.h
+++ b/include/hw/ppc/pnv_xive.h
@@ -12,6 +12,7 @@
 
 #include "hw/ppc/xive.h"
 #include "qom/object.h"
+#include "hw/ppc/xive2.h"
 
 struct PnvChip;
 
@@ -95,4 +96,74 @@ struct PnvXiveClass {
 
 void pnv_xive_pic_print_info(PnvXive *xive, Monitor *mon);
 
+/*
+ * XIVE2 interrupt controller (POWER10)
+ */
+#define TYPE_PNV_XIVE2 "pnv-xive2"
+OBJECT_DECLARE_TYPE(PnvXive2, PnvXive2Class, PNV_XIVE2);
+
+typedef struct PnvXive2 {
+    Xive2Router   parent_obj;
+
+    /* Owning chip */
+    struct PnvChip *chip;
+
+    /* XSCOM addresses giving access to the controller registers */
+    MemoryRegion  xscom_regs;
+
+    MemoryRegion  ic_mmio;
+    MemoryRegion  ic_mmios[8];
+    MemoryRegion  esb_mmio;
+    MemoryRegion  end_mmio;
+    MemoryRegion  nvc_mmio;
+    MemoryRegion  nvpg_mmio;
+    MemoryRegion  tm_mmio;
+
+    /* Shortcut values for the Main MMIO regions */
+    hwaddr        ic_base;
+    uint32_t      ic_shift;
+    hwaddr        esb_base;
+    uint32_t      esb_shift;
+    hwaddr        end_base;
+    uint32_t      end_shift;
+    hwaddr        nvc_base;
+    uint32_t      nvc_shift;
+    hwaddr        nvpg_base;
+    uint32_t      nvpg_shift;
+    hwaddr        tm_base;
+    uint32_t      tm_shift;
+
+    /* Interrupt controller registers */
+    uint64_t      cq_regs[0x40];
+    uint64_t      vc_regs[0x100];
+    uint64_t      pc_regs[0x100];
+    uint64_t      tctxt_regs[0x30];
+
+    /* To change default behavior */
+    uint64_t      capabilities;
+    uint64_t      config;
+
+    /* Our XIVE source objects for IPIs and ENDs */
+    XiveSource    ipi_source;
+    Xive2EndSource end_source;
+
+    /*
+     * Virtual Structure Descriptor tables
+     * These are in a SRAM protected by ECC.
+     */
+    uint64_t      vsds[9][XIVE_BLOCK_MAX];
+
+    /* Translation tables */
+    uint64_t      tables[8][XIVE_BLOCK_MAX];
+
+} PnvXive2;
+
+typedef struct PnvXive2Class {
+    Xive2RouterClass parent_class;
+
+    DeviceRealize parent_realize;
+} PnvXive2Class;
+
+void pnv_xive2_pic_print_info(PnvXive2 *xive, Monitor *mon);
+
 #endif /* PPC_PNV_XIVE_H */
diff --git a/include/hw/ppc/pnv_xscom.h b/include/hw/ppc/pnv_xscom.h
index 2ff9f7a8d6..188da874a4 100644
--- a/include/hw/ppc/pnv_xscom.h
+++ b/include/hw/ppc/pnv_xscom.h
@@ -131,6 +131,9 @@ struct PnvXScomInterfaceClass {
 #define PNV10_XSCOM_PSIHB_BASE     0x3011D00
 #define PNV10_XSCOM_PSIHB_SIZE     0x100
 
+#define PNV10_XSCOM_XIVE2_BASE     0x2010800
+#define PNV10_XSCOM_XIVE2_SIZE     0x400
+
 void pnv_xscom_realize(PnvChip *chip, uint64_t size, Error **errp);
 int pnv_dt_xscom(PnvChip *chip, void *fdt, int root_offset,
                  uint64_t xscom_base, uint64_t xscom_size,