diff options
| -rw-r--r-- | hw/arm/Kconfig | 1 | ||||
| -rw-r--r-- | hw/arm/aspeed.c | 72 | ||||
| -rw-r--r-- | hw/arm/aspeed_ast2600.c | 2 | ||||
| -rw-r--r-- | hw/misc/Kconfig | 4 | ||||
| -rw-r--r-- | hw/misc/emc141x.c | 326 | ||||
| -rw-r--r-- | hw/misc/meson.build | 1 | ||||
| -rw-r--r-- | hw/ssi/aspeed_smc.c | 25 | ||||
| -rw-r--r-- | include/hw/misc/emc141x_regs.h | 37 | ||||
| -rw-r--r-- | tests/qtest/emc141x-test.c | 81 | ||||
| -rw-r--r-- | tests/qtest/meson.build | 1 |
10 files changed, 542 insertions, 8 deletions
diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index e69a9009cf..eb8a8844cf 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -407,6 +407,7 @@ config ASPEED_SOC select SSI_M25P80 select TMP105 select TMP421 + select EMC141X select UNIMP select LED diff --git a/hw/arm/aspeed.c b/hw/arm/aspeed.c index 0ef3f6b412..bfe2051cfe 100644 --- a/hw/arm/aspeed.c +++ b/hw/arm/aspeed.c @@ -121,6 +121,20 @@ struct AspeedMachineState { SCU_AST2500_HW_STRAP_ACPI_ENABLE | \ SCU_HW_STRAP_SPI_MODE(SCU_HW_STRAP_SPI_MASTER)) +#define G220A_BMC_HW_STRAP1 ( \ + SCU_AST2500_HW_STRAP_SPI_AUTOFETCH_ENABLE | \ + SCU_AST2500_HW_STRAP_GPIO_STRAP_ENABLE | \ + SCU_AST2500_HW_STRAP_UART_DEBUG | \ + SCU_AST2500_HW_STRAP_RESERVED28 | \ + SCU_AST2500_HW_STRAP_DDR4_ENABLE | \ + SCU_HW_STRAP_2ND_BOOT_WDT | \ + SCU_HW_STRAP_VGA_CLASS_CODE | \ + SCU_HW_STRAP_LPC_RESET_PIN | \ + SCU_HW_STRAP_SPI_MODE(SCU_HW_STRAP_SPI_MASTER) | \ + SCU_AST2500_HW_STRAP_SET_AXI_AHB_RATIO(AXI_AHB_RATIO_2_1) | \ + SCU_HW_STRAP_VGA_SIZE_SET(VGA_64M_DRAM) | \ + SCU_AST2500_HW_STRAP_RESERVED1) + /* Witherspoon hardware value: 0xF10AD216 (but use romulus definition) */ #define WITHERSPOON_BMC_HW_STRAP1 ROMULUS_BMC_HW_STRAP1 @@ -579,6 +593,42 @@ static void witherspoon_bmc_i2c_init(AspeedMachineState *bmc) /* Bus 11: TODO ucd90160@64 */ } +static void g220a_bmc_i2c_init(AspeedMachineState *bmc) +{ + AspeedSoCState *soc = &bmc->soc; + DeviceState *dev; + + dev = DEVICE(i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 3), + "emc1413", 0x4c)); + object_property_set_int(OBJECT(dev), "temperature0", 31000, &error_abort); + object_property_set_int(OBJECT(dev), "temperature1", 28000, &error_abort); + object_property_set_int(OBJECT(dev), "temperature2", 20000, &error_abort); + + dev = DEVICE(i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 12), + "emc1413", 0x4c)); + object_property_set_int(OBJECT(dev), "temperature0", 31000, &error_abort); + object_property_set_int(OBJECT(dev), "temperature1", 28000, &error_abort); + object_property_set_int(OBJECT(dev), "temperature2", 20000, &error_abort); + + dev = DEVICE(i2c_slave_create_simple(aspeed_i2c_get_bus(&soc->i2c, 13), + "emc1413", 0x4c)); + object_property_set_int(OBJECT(dev), "temperature0", 31000, &error_abort); + object_property_set_int(OBJECT(dev), "temperature1", 28000, &error_abort); + object_property_set_int(OBJECT(dev), "temperature2", 20000, &error_abort); + + static uint8_t eeprom_buf[2 * 1024] = { + 0x01, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0xfe, + 0x01, 0x06, 0x00, 0xc9, 0x42, 0x79, 0x74, 0x65, + 0x64, 0x61, 0x6e, 0x63, 0x65, 0xc5, 0x47, 0x32, + 0x32, 0x30, 0x41, 0xc4, 0x41, 0x41, 0x42, 0x42, + 0xc4, 0x43, 0x43, 0x44, 0x44, 0xc4, 0x45, 0x45, + 0x46, 0x46, 0xc4, 0x48, 0x48, 0x47, 0x47, 0xc1, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xa7, + }; + smbus_eeprom_init_one(aspeed_i2c_get_bus(&soc->i2c, 4), 0x57, + eeprom_buf); +} + static bool aspeed_get_mmio_exec(Object *obj, Error **errp) { return ASPEED_MACHINE(obj)->mmio_exec; @@ -818,6 +868,24 @@ static void aspeed_machine_tacoma_class_init(ObjectClass *oc, void *data) aspeed_soc_num_cpus(amc->soc_name); }; +static void aspeed_machine_g220a_class_init(ObjectClass *oc, void *data) +{ + MachineClass *mc = MACHINE_CLASS(oc); + AspeedMachineClass *amc = ASPEED_MACHINE_CLASS(oc); + + mc->desc = "Bytedance G220A BMC (ARM1176)"; + amc->soc_name = "ast2500-a1"; + amc->hw_strap1 = G220A_BMC_HW_STRAP1; + amc->fmc_model = "n25q512a"; + amc->spi_model = "mx25l25635e"; + amc->num_cs = 2; + amc->macs_mask = ASPEED_MAC1_ON | ASPEED_MAC2_ON; + amc->i2c_init = g220a_bmc_i2c_init; + mc->default_ram_size = 1024 * MiB; + mc->default_cpus = mc->min_cpus = mc->max_cpus = + aspeed_soc_num_cpus(amc->soc_name); +}; + static const TypeInfo aspeed_machine_types[] = { { .name = MACHINE_TYPE_NAME("palmetto-bmc"), @@ -856,6 +924,10 @@ static const TypeInfo aspeed_machine_types[] = { .parent = TYPE_ASPEED_MACHINE, .class_init = aspeed_machine_tacoma_class_init, }, { + .name = MACHINE_TYPE_NAME("g220a-bmc"), + .parent = TYPE_ASPEED_MACHINE, + .class_init = aspeed_machine_g220a_class_init, + }, { .name = TYPE_ASPEED_MACHINE, .parent = TYPE_MACHINE, .instance_size = sizeof(AspeedMachineState), diff --git a/hw/arm/aspeed_ast2600.c b/hw/arm/aspeed_ast2600.c index 1450bde7cf..12e4a16d37 100644 --- a/hw/arm/aspeed_ast2600.c +++ b/hw/arm/aspeed_ast2600.c @@ -481,7 +481,7 @@ static void aspeed_soc_ast2600_class_init(ObjectClass *oc, void *data) sc->name = "ast2600-a1"; sc->cpu_type = ARM_CPU_TYPE_NAME("cortex-a7"); sc->silicon_rev = AST2600_A1_SILICON_REV; - sc->sram_size = 0x10000; + sc->sram_size = 0x16400; sc->spis_num = 2; sc->ehcis_num = 2; sc->wdts_num = 4; diff --git a/hw/misc/Kconfig b/hw/misc/Kconfig index dc44dc14f6..cf18ac08e6 100644 --- a/hw/misc/Kconfig +++ b/hw/misc/Kconfig @@ -13,6 +13,10 @@ config TMP421 bool depends on I2C +config EMC141X + bool + depends on I2C + config ISA_DEBUG bool depends on ISA_BUS diff --git a/hw/misc/emc141x.c b/hw/misc/emc141x.c new file mode 100644 index 0000000000..f7c53d48a4 --- /dev/null +++ b/hw/misc/emc141x.c @@ -0,0 +1,326 @@ +/* + * SMSC EMC141X temperature sensor. + * + * Copyright (c) 2020 Bytedance Corporation + * Written by John Wang <wangzhiqiang.bj@bytedance.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 or + * (at your option) version 3 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, see <http://www.gnu.org/licenses/>. + */ + +#include "qemu/osdep.h" +#include "hw/i2c/i2c.h" +#include "migration/vmstate.h" +#include "qapi/error.h" +#include "qapi/visitor.h" +#include "qemu/module.h" +#include "qom/object.h" +#include "hw/misc/emc141x_regs.h" + +#define SENSORS_COUNT_MAX 4 + +struct EMC141XState { + I2CSlave parent_obj; + struct { + uint8_t raw_temp_min; + uint8_t raw_temp_current; + uint8_t raw_temp_max; + } sensor[SENSORS_COUNT_MAX]; + uint8_t len; + uint8_t data; + uint8_t pointer; +}; + +struct EMC141XClass { + I2CSlaveClass parent_class; + uint8_t model; + unsigned sensors_count; +}; + +#define TYPE_EMC141X "emc141x" +OBJECT_DECLARE_TYPE(EMC141XState, EMC141XClass, EMC141X) + +static void emc141x_get_temperature(Object *obj, Visitor *v, const char *name, + void *opaque, Error **errp) +{ + EMC141XState *s = EMC141X(obj); + EMC141XClass *sc = EMC141X_GET_CLASS(s); + int64_t value; + unsigned tempid; + + if (sscanf(name, "temperature%u", &tempid) != 1) { + error_setg(errp, "error reading %s: %s", name, g_strerror(errno)); + return; + } + + if (tempid >= sc->sensors_count) { + error_setg(errp, "error reading %s", name); + return; + } + + value = s->sensor[tempid].raw_temp_current * 1000; + + visit_type_int(v, name, &value, errp); +} + +static void emc141x_set_temperature(Object *obj, Visitor *v, const char *name, + void *opaque, Error **errp) +{ + EMC141XState *s = EMC141X(obj); + EMC141XClass *sc = EMC141X_GET_CLASS(s); + int64_t temp; + unsigned tempid; + + if (!visit_type_int(v, name, &temp, errp)) { + return; + } + + if (sscanf(name, "temperature%u", &tempid) != 1) { + error_setg(errp, "error reading %s: %s", name, g_strerror(errno)); + return; + } + + if (tempid >= sc->sensors_count) { + error_setg(errp, "error reading %s", name); + return; + } + + s->sensor[tempid].raw_temp_current = temp / 1000; +} + +static void emc141x_read(EMC141XState *s) +{ + EMC141XClass *sc = EMC141X_GET_CLASS(s); + switch (s->pointer) { + case EMC141X_DEVICE_ID: + s->data = sc->model; + break; + case EMC141X_MANUFACTURER_ID: + s->data = MANUFACTURER_ID; + break; + case EMC141X_REVISION: + s->data = REVISION; + break; + case EMC141X_TEMP_HIGH0: + s->data = s->sensor[0].raw_temp_current; + break; + case EMC141X_TEMP_HIGH1: + s->data = s->sensor[1].raw_temp_current; + break; + case EMC141X_TEMP_HIGH2: + s->data = s->sensor[2].raw_temp_current; + break; + case EMC141X_TEMP_HIGH3: + s->data = s->sensor[3].raw_temp_current; + break; + case EMC141X_TEMP_MAX_HIGH0: + s->data = s->sensor[0].raw_temp_max; + break; + case EMC141X_TEMP_MAX_HIGH1: + s->data = s->sensor[1].raw_temp_max; + break; + case EMC141X_TEMP_MAX_HIGH2: + s->data = s->sensor[2].raw_temp_max; + break; + case EMC141X_TEMP_MAX_HIGH3: + s->data = s->sensor[3].raw_temp_max; + break; + case EMC141X_TEMP_MIN_HIGH0: + s->data = s->sensor[0].raw_temp_min; + break; + case EMC141X_TEMP_MIN_HIGH1: + s->data = s->sensor[1].raw_temp_min; + break; + case EMC141X_TEMP_MIN_HIGH2: + s->data = s->sensor[2].raw_temp_min; + break; + case EMC141X_TEMP_MIN_HIGH3: + s->data = s->sensor[3].raw_temp_min; + break; + default: + s->data = 0; + } +} + +static void emc141x_write(EMC141XState *s) +{ + switch (s->pointer) { + case EMC141X_TEMP_MAX_HIGH0: + s->sensor[0].raw_temp_max = s->data; + break; + case EMC141X_TEMP_MAX_HIGH1: + s->sensor[1].raw_temp_max = s->data; + break; + case EMC141X_TEMP_MAX_HIGH2: + s->sensor[2].raw_temp_max = s->data; + break; + case EMC141X_TEMP_MAX_HIGH3: + s->sensor[3].raw_temp_max = s->data; + break; + case EMC141X_TEMP_MIN_HIGH0: + s->sensor[0].raw_temp_min = s->data; + break; + case EMC141X_TEMP_MIN_HIGH1: + s->sensor[1].raw_temp_min = s->data; + break; + case EMC141X_TEMP_MIN_HIGH2: + s->sensor[2].raw_temp_min = s->data; + break; + case EMC141X_TEMP_MIN_HIGH3: + s->sensor[3].raw_temp_min = s->data; + break; + default: + s->data = 0; + } +} + +static uint8_t emc141x_rx(I2CSlave *i2c) +{ + EMC141XState *s = EMC141X(i2c); + + if (s->len == 0) { + s->len++; + return s->data; + } else { + return 0xff; + } +} + +static int emc141x_tx(I2CSlave *i2c, uint8_t data) +{ + EMC141XState *s = EMC141X(i2c); + + if (s->len == 0) { + /* first byte is the reg pointer */ + s->pointer = data; + s->len++; + } else if (s->len == 1) { + s->data = data; + emc141x_write(s); + } + + return 0; +} + +static int emc141x_event(I2CSlave *i2c, enum i2c_event event) +{ + EMC141XState *s = EMC141X(i2c); + + if (event == I2C_START_RECV) { + emc141x_read(s); + } + + s->len = 0; + return 0; +} + +static const VMStateDescription vmstate_emc141x = { + .name = "EMC141X", + .version_id = 0, + .minimum_version_id = 0, + .fields = (VMStateField[]) { + VMSTATE_UINT8(len, EMC141XState), + VMSTATE_UINT8(data, EMC141XState), + VMSTATE_UINT8(pointer, EMC141XState), + VMSTATE_I2C_SLAVE(parent_obj, EMC141XState), + VMSTATE_END_OF_LIST() + } +}; + +static void emc141x_reset(DeviceState *dev) +{ + EMC141XState *s = EMC141X(dev); + int i; + + for (i = 0; i < SENSORS_COUNT_MAX; i++) { + s->sensor[i].raw_temp_max = 0x55; + } + s->pointer = 0; + s->len = 0; +} + +static void emc141x_initfn(Object *obj) +{ + object_property_add(obj, "temperature0", "int", + emc141x_get_temperature, + emc141x_set_temperature, NULL, NULL); + object_property_add(obj, "temperature1", "int", + emc141x_get_temperature, + emc141x_set_temperature, NULL, NULL); + object_property_add(obj, "temperature2", "int", + emc141x_get_temperature, + emc141x_set_temperature, NULL, NULL); + object_property_add(obj, "temperature3", "int", + emc141x_get_temperature, + emc141x_set_temperature, NULL, NULL); +} + +static void emc141x_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + I2CSlaveClass *k = I2C_SLAVE_CLASS(klass); + + dc->reset = emc141x_reset; + k->event = emc141x_event; + k->recv = emc141x_rx; + k->send = emc141x_tx; + dc->vmsd = &vmstate_emc141x; +} + +static void emc1413_class_init(ObjectClass *klass, void *data) +{ + EMC141XClass *ec = EMC141X_CLASS(klass); + + emc141x_class_init(klass, data); + ec->model = EMC1413_DEVICE_ID; + ec->sensors_count = 3; +} + +static void emc1414_class_init(ObjectClass *klass, void *data) +{ + EMC141XClass *ec = EMC141X_CLASS(klass); + + emc141x_class_init(klass, data); + ec->model = EMC1414_DEVICE_ID; + ec->sensors_count = 4; +} + +static const TypeInfo emc141x_info = { + .name = TYPE_EMC141X, + .parent = TYPE_I2C_SLAVE, + .instance_size = sizeof(EMC141XState), + .class_size = sizeof(EMC141XClass), + .instance_init = emc141x_initfn, + .abstract = true, +}; + +static const TypeInfo emc1413_info = { + .name = "emc1413", + .parent = TYPE_EMC141X, + .class_init = emc1413_class_init, +}; + +static const TypeInfo emc1414_info = { + .name = "emc1414", + .parent = TYPE_EMC141X, + .class_init = emc1414_class_init, +}; + +static void emc141x_register_types(void) +{ + type_register_static(&emc141x_info); + type_register_static(&emc1413_info); + type_register_static(&emc1414_info); +} + +type_init(emc141x_register_types) diff --git a/hw/misc/meson.build b/hw/misc/meson.build index 1cd48e8a0f..ce15ffceb9 100644 --- a/hw/misc/meson.build +++ b/hw/misc/meson.build @@ -9,6 +9,7 @@ softmmu_ss.add(when: 'CONFIG_PCI_TESTDEV', if_true: files('pci-testdev.c')) softmmu_ss.add(when: 'CONFIG_SGA', if_true: files('sga.c')) softmmu_ss.add(when: 'CONFIG_TMP105', if_true: files('tmp105.c')) softmmu_ss.add(when: 'CONFIG_TMP421', if_true: files('tmp421.c')) +softmmu_ss.add(when: 'CONFIG_EMC141X', if_true: files('emc141x.c')) softmmu_ss.add(when: 'CONFIG_UNIMP', if_true: files('unimp.c')) softmmu_ss.add(when: 'CONFIG_EMPTY_SLOT', if_true: files('empty_slot.c')) softmmu_ss.add(when: 'CONFIG_LED', if_true: files('led.c')) diff --git a/hw/ssi/aspeed_smc.c b/hw/ssi/aspeed_smc.c index 795784e5f3..e3d5e26058 100644 --- a/hw/ssi/aspeed_smc.c +++ b/hw/ssi/aspeed_smc.c @@ -71,6 +71,16 @@ #define INTR_CTRL_CMD_ABORT_EN (1 << 2) #define INTR_CTRL_WRITE_PROTECT_EN (1 << 1) +/* Command Control Register */ +#define R_CE_CMD_CTRL (0x0C / 4) +#define CTRL_ADDR_BYTE0_DISABLE_SHIFT 4 +#define CTRL_DATA_BYTE0_DISABLE_SHIFT 0 + +#define aspeed_smc_addr_byte_enabled(s, i) \ + (!((s)->regs[R_CE_CMD_CTRL] & (1 << (CTRL_ADDR_BYTE0_DISABLE_SHIFT + (i))))) +#define aspeed_smc_data_byte_enabled(s, i) \ + (!((s)->regs[R_CE_CMD_CTRL] & (1 << (CTRL_DATA_BYTE0_DISABLE_SHIFT + (i))))) + /* CEx Control Register */ #define R_CTRL0 (0x10 / 4) #define CTRL_IO_QPI (1 << 31) @@ -702,19 +712,17 @@ static void aspeed_smc_flash_setup(AspeedSMCFlash *fl, uint32_t addr) { const AspeedSMCState *s = fl->controller; uint8_t cmd = aspeed_smc_flash_cmd(fl); - int i; + int i = aspeed_smc_flash_is_4byte(fl) ? 4 : 3; /* Flash access can not exceed CS segment */ addr = aspeed_smc_check_segment_addr(fl, addr); ssi_transfer(s->spi, cmd); - - if (aspeed_smc_flash_is_4byte(fl)) { - ssi_transfer(s->spi, (addr >> 24) & 0xff); + while (i--) { + if (aspeed_smc_addr_byte_enabled(s, i)) { + ssi_transfer(s->spi, (addr >> (i * 8)) & 0xff); + } } - ssi_transfer(s->spi, (addr >> 16) & 0xff); - ssi_transfer(s->spi, (addr >> 8) & 0xff); - ssi_transfer(s->spi, (addr & 0xff)); /* * Use fake transfers to model dummy bytes. The value should @@ -988,6 +996,7 @@ static uint64_t aspeed_smc_read(void *opaque, hwaddr addr, unsigned int size) (addr >= s->r_timings && addr < s->r_timings + s->ctrl->nregs_timings) || addr == s->r_ce_ctrl || + addr == R_CE_CMD_CTRL || addr == R_INTR_CTRL || addr == R_DUMMY_DATA || (s->ctrl->has_dma && addr == R_DMA_CTRL) || @@ -1276,6 +1285,8 @@ static void aspeed_smc_write(void *opaque, hwaddr addr, uint64_t data, if (value != s->regs[R_SEG_ADDR0 + cs]) { aspeed_smc_flash_set_segment(s, cs, value); } + } else if (addr == R_CE_CMD_CTRL) { + s->regs[addr] = value & 0xff; } else if (addr == R_DUMMY_DATA) { s->regs[addr] = value & 0xff; } else if (addr == R_INTR_CTRL) { diff --git a/include/hw/misc/emc141x_regs.h b/include/hw/misc/emc141x_regs.h new file mode 100644 index 0000000000..0560fb7c5c --- /dev/null +++ b/include/hw/misc/emc141x_regs.h @@ -0,0 +1,37 @@ +/* + * SMSC EMC141X temperature sensor. + * + * Browse the data sheet: + * + * http://ww1.microchip.com/downloads/en/DeviceDoc/20005274A.pdf + * + * This work is licensed under the terms of the GNU GPL, version 2 or + * later. See the COPYING file in the top-level directory. + */ + +#ifndef TMP105_REGS_H +#define TMP105_REGS_H + +#define EMC1413_DEVICE_ID 0x21 +#define EMC1414_DEVICE_ID 0x25 +#define MANUFACTURER_ID 0x5d +#define REVISION 0x04 + +/* the EMC141X registers */ +#define EMC141X_TEMP_HIGH0 0x00 +#define EMC141X_TEMP_HIGH1 0x01 +#define EMC141X_TEMP_HIGH2 0x23 +#define EMC141X_TEMP_HIGH3 0x2a +#define EMC141X_TEMP_MAX_HIGH0 0x05 +#define EMC141X_TEMP_MIN_HIGH0 0x06 +#define EMC141X_TEMP_MAX_HIGH1 0x07 +#define EMC141X_TEMP_MIN_HIGH1 0x08 +#define EMC141X_TEMP_MAX_HIGH2 0x15 +#define EMC141X_TEMP_MIN_HIGH2 0x16 +#define EMC141X_TEMP_MAX_HIGH3 0x2c +#define EMC141X_TEMP_MIN_HIGH3 0x2d +#define EMC141X_DEVICE_ID 0xfd +#define EMC141X_MANUFACTURER_ID 0xfe +#define EMC141X_REVISION 0xff + +#endif diff --git a/tests/qtest/emc141x-test.c b/tests/qtest/emc141x-test.c new file mode 100644 index 0000000000..714058806a --- /dev/null +++ b/tests/qtest/emc141x-test.c @@ -0,0 +1,81 @@ +/* + * QTest testcase for the EMC141X temperature sensor + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + */ + +#include "qemu/osdep.h" + +#include "libqtest-single.h" +#include "libqos/qgraph.h" +#include "libqos/i2c.h" +#include "qapi/qmp/qdict.h" +#include "hw/misc/emc141x_regs.h" + +#define EMC1414_TEST_ID "emc1414-test" + +static int qmp_emc1414_get_temperature(const char *id) +{ + QDict *response; + int ret; + + response = qmp("{ 'execute': 'qom-get', 'arguments': { 'path': %s, " + "'property': 'temperature0' } }", id); + g_assert(qdict_haskey(response, "return")); + ret = qdict_get_int(response, "return"); + qobject_unref(response); + return ret; +} + +static void qmp_emc1414_set_temperature(const char *id, int value) +{ + QDict *response; + + response = qmp("{ 'execute': 'qom-set', 'arguments': { 'path': %s, " + "'property': 'temperature0', 'value': %d } }", id, value); + g_assert(qdict_haskey(response, "return")); + qobject_unref(response); +} + +static void send_and_receive(void *obj, void *data, QGuestAllocator *alloc) +{ + uint16_t value; + QI2CDevice *i2cdev = (QI2CDevice *)obj; + + value = qmp_emc1414_get_temperature(EMC1414_TEST_ID); + g_assert_cmpuint(value, ==, 0); + + value = i2c_get8(i2cdev, EMC141X_TEMP_HIGH0); + g_assert_cmphex(value, ==, 0); + + /* The default max value is 85C, 0x55=85 */ + value = i2c_get8(i2cdev, EMC141X_TEMP_MAX_HIGH0); + g_assert_cmphex(value, ==, 0x55); + + value = i2c_get8(i2cdev, EMC141X_TEMP_MIN_HIGH0); + g_assert_cmphex(value, ==, 0); + + /* 3000mc = 30C */ + qmp_emc1414_set_temperature(EMC1414_TEST_ID, 30000); + value = qmp_emc1414_get_temperature(EMC1414_TEST_ID); + g_assert_cmpuint(value, ==, 30000); + + value = i2c_get8(i2cdev, EMC141X_TEMP_HIGH0); + g_assert_cmphex(value, ==, 30); + +} + +static void emc1414_register_nodes(void) +{ + QOSGraphEdgeOptions opts = { + .extra_device_opts = "id=" EMC1414_TEST_ID ",address=0x70" + }; + add_qi2c_address(&opts, &(QI2CAddress) { 0x70 }); + + qos_node_create_driver("emc1414", i2c_device_create); + qos_node_consumes("emc1414", "i2c-bus", &opts); + + qos_add_test("tx-rx", "emc1414", send_and_receive, NULL); +} +libqos_init(emc1414_register_nodes); diff --git a/tests/qtest/meson.build b/tests/qtest/meson.build index 4ca83ce605..6a67c538be 100644 --- a/tests/qtest/meson.build +++ b/tests/qtest/meson.build @@ -189,6 +189,7 @@ qos_test_ss.add( 'sdhci-test.c', 'spapr-phb-test.c', 'tmp105-test.c', + 'emc141x-test.c', 'usb-hcd-ohci-test.c', 'virtio-test.c', 'virtio-blk-test.c', |