diff options
| -rw-r--r-- | MAINTAINERS | 6 | ||||
| -rw-r--r-- | docs/system/riscv/microblaze-v-generic.rst | 42 | ||||
| -rw-r--r-- | docs/system/target-riscv.rst | 1 | ||||
| -rw-r--r-- | hw/riscv/Kconfig | 8 | ||||
| -rw-r--r-- | hw/riscv/meson.build | 1 | ||||
| -rw-r--r-- | hw/riscv/microblaze-v-generic.c | 184 |
6 files changed, 242 insertions, 0 deletions
diff --git a/MAINTAINERS b/MAINTAINERS index 430a0f4f8c..fb6a66f1f8 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1626,6 +1626,12 @@ F: docs/system/riscv/sifive_u.rst F: hw/*/*sifive*.c F: include/hw/*/*sifive*.h +AMD Microblaze-V Generic Board +M: Sai Pavan Boddu <sai.pavan.boddu@amd.com> +S: Maintained +F: hw/riscv/microblaze-v-generic.c +F: docs/system/riscv/microblaze-v-generic.rst + RX Machines ----------- rx-gdbsim diff --git a/docs/system/riscv/microblaze-v-generic.rst b/docs/system/riscv/microblaze-v-generic.rst new file mode 100644 index 0000000000..5606f88d57 --- /dev/null +++ b/docs/system/riscv/microblaze-v-generic.rst @@ -0,0 +1,42 @@ +Microblaze-V generic board (``amd-microblaze-v-generic``) +========================================================= +The AMD MicroBlaze™ V processor is a soft-core RISC-V processor IP for AMD +adaptive SoCs and FPGAs. The MicroBlaze™ V processor is based on the 32-bit (or +64-bit) RISC-V instruction set architecture (ISA) and contains interfaces +compatible with the classic MicroBlaze™ V processor (i.e it is a drop in +replacement for the classic MicroBlaze™ processor in existing RTL designs). +More information can be found in below document. + +https://docs.amd.com/r/en-US/ug1629-microblaze-v-user-guide/MicroBlaze-V-Architecture + +The MicroBlaze™ V generic board in QEMU has following supported devices: + + - timer + - uartlite + - uart16550 + - emaclite + - timer2 + - axi emac + - axi dma + +The MicroBlaze™ V core in QEMU has the following configuration: + + - RV32I base integer instruction set + - "Zicsr" Control and Status register instructions + - "Zifencei" instruction-fetch + - Extensions: m, a, f, c + +Running +""""""" +Below is an example command line for launching mainline U-boot +(xilinx_mbv32_defconfig) on the Microblaze-V generic board. + +.. code-block:: bash + + $ qemu-system-riscv32 -M amd-microblaze-v-generic \ + -display none \ + -device loader,addr=0x80000000,file=u-boot-spl.bin,cpu-num=0 \ + -device loader,addr=0x80200000,file=u-boot.img \ + -serial mon:stdio \ + -device loader,addr=0x83000000,file=system.dtb \ + -m 2g diff --git a/docs/system/target-riscv.rst b/docs/system/target-riscv.rst index ba195f1518..95457af130 100644 --- a/docs/system/target-riscv.rst +++ b/docs/system/target-riscv.rst @@ -66,6 +66,7 @@ undocumented; you can get a complete list by running .. toctree:: :maxdepth: 1 + riscv/microblaze-v-generic riscv/microchip-icicle-kit riscv/shakti-c riscv/sifive_u diff --git a/hw/riscv/Kconfig b/hw/riscv/Kconfig index 2e88467c4a..e6a0ac1fa1 100644 --- a/hw/riscv/Kconfig +++ b/hw/riscv/Kconfig @@ -25,6 +25,14 @@ config MICROCHIP_PFSOC select SIFIVE_PLIC select UNIMP +config MICROBLAZE_V + bool + default y + depends on RISCV32 || RISCV64 + select XILINX + select XILINX_AXI + select XILINX_ETHLITE + config OPENTITAN bool default y diff --git a/hw/riscv/meson.build b/hw/riscv/meson.build index 3be13d7774..3c7e083aca 100644 --- a/hw/riscv/meson.build +++ b/hw/riscv/meson.build @@ -11,5 +11,6 @@ riscv_ss.add(when: 'CONFIG_SPIKE', if_true: files('spike.c')) riscv_ss.add(when: 'CONFIG_MICROCHIP_PFSOC', if_true: files('microchip_pfsoc.c')) riscv_ss.add(when: 'CONFIG_ACPI', if_true: files('virt-acpi-build.c')) riscv_ss.add(when: 'CONFIG_RISCV_IOMMU', if_true: files('riscv-iommu.c', 'riscv-iommu-pci.c', 'riscv-iommu-sys.c')) +riscv_ss.add(when: 'CONFIG_MICROBLAZE_V', if_true: files('microblaze-v-generic.c')) hw_arch += {'riscv': riscv_ss} diff --git a/hw/riscv/microblaze-v-generic.c b/hw/riscv/microblaze-v-generic.c new file mode 100644 index 0000000000..427e3baca7 --- /dev/null +++ b/hw/riscv/microblaze-v-generic.c @@ -0,0 +1,184 @@ +/* + * QEMU model of Microblaze V generic board. + * + * based on hw/microblaze/petalogix_ml605_mmu.c + * + * Copyright (c) 2011 Michal Simek <monstr@monstr.eu> + * Copyright (c) 2011 PetaLogix + * Copyright (c) 2009 Edgar E. Iglesias. + * Copyright (C) 2024, Advanced Micro Devices, Inc. + * SPDX-License-Identifier: GPL-2.0-or-later + * + * Written by Sai Pavan Boddu <sai.pavan.boddu@amd.com + * and by Michal Simek <michal.simek@amd.com>. + */ + +#include "qemu/osdep.h" +#include "qemu/units.h" +#include "qapi/error.h" +#include "cpu.h" +#include "hw/sysbus.h" +#include "sysemu/sysemu.h" +#include "net/net.h" +#include "hw/boards.h" +#include "hw/char/serial-mm.h" +#include "exec/address-spaces.h" +#include "hw/char/xilinx_uartlite.h" +#include "hw/misc/unimp.h" + +#define LMB_BRAM_SIZE (128 * KiB) +#define MEMORY_BASEADDR 0x80000000 +#define INTC_BASEADDR 0x41200000 +#define TIMER_BASEADDR 0x41c00000 +#define TIMER_BASEADDR2 0x41c10000 +#define UARTLITE_BASEADDR 0x40600000 +#define ETHLITE_BASEADDR 0x40e00000 +#define UART16550_BASEADDR 0x44a10000 +#define AXIENET_BASEADDR 0x40c00000 +#define AXIDMA_BASEADDR 0x41e00000 +#define GPIO_BASEADDR 0x40000000 +#define GPIO_BASEADDR2 0x40010000 +#define GPIO_BASEADDR3 0x40020000 +#define I2C_BASEADDR 0x40800000 +#define QSPI_BASEADDR 0x44a00000 + +#define TIMER_IRQ 0 +#define UARTLITE_IRQ 1 +#define UART16550_IRQ 4 +#define ETHLITE_IRQ 5 +#define TIMER_IRQ2 6 +#define AXIENET_IRQ 7 +#define AXIDMA_IRQ1 8 +#define AXIDMA_IRQ0 9 + +static void mb_v_generic_init(MachineState *machine) +{ + ram_addr_t ram_size = machine->ram_size; + DeviceState *dev, *dma, *eth0; + Object *ds, *cs; + int i; + RISCVCPU *cpu; + hwaddr ddr_base = MEMORY_BASEADDR; + MemoryRegion *phys_lmb_bram = g_new(MemoryRegion, 1); + MemoryRegion *phys_ram = g_new(MemoryRegion, 1); + qemu_irq irq[32]; + MemoryRegion *sysmem = get_system_memory(); + + cpu = RISCV_CPU(object_new(machine->cpu_type)); + object_property_set_bool(OBJECT(cpu), "h", false, NULL); + object_property_set_bool(OBJECT(cpu), "d", false, NULL); + qdev_realize(DEVICE(cpu), NULL, &error_abort); + /* Attach emulated BRAM through the LMB. */ + memory_region_init_ram(phys_lmb_bram, NULL, + "mb_v.lmb_bram", LMB_BRAM_SIZE, + &error_fatal); + memory_region_add_subregion(sysmem, 0x00000000, phys_lmb_bram); + + memory_region_init_ram(phys_ram, NULL, "mb_v.ram", + ram_size, &error_fatal); + memory_region_add_subregion(sysmem, ddr_base, phys_ram); + + dev = qdev_new("xlnx.xps-intc"); + qdev_prop_set_uint32(dev, "kind-of-intr", + 1 << UARTLITE_IRQ); + sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal); + sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, INTC_BASEADDR); + sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0, + qdev_get_gpio_in(DEVICE(cpu), 11)); + for (i = 0; i < 32; i++) { + irq[i] = qdev_get_gpio_in(dev, i); + } + + /* Uartlite */ + dev = qdev_new(TYPE_XILINX_UARTLITE); + qdev_prop_set_chr(dev, "chardev", serial_hd(0)); + sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal); + sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, UARTLITE_BASEADDR); + sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0, irq[UARTLITE_IRQ]); + + /* Full uart */ + serial_mm_init(sysmem, UART16550_BASEADDR + 0x1000, 2, + irq[UART16550_IRQ], 115200, serial_hd(1), + DEVICE_LITTLE_ENDIAN); + + /* 2 timers at irq 0 @ 100 Mhz. */ + dev = qdev_new("xlnx.xps-timer"); + qdev_prop_set_uint32(dev, "one-timer-only", 0); + qdev_prop_set_uint32(dev, "clock-frequency", 100000000); + sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal); + sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, TIMER_BASEADDR); + sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0, irq[TIMER_IRQ]); + + /* 2 timers at irq 3 @ 100 Mhz. */ + dev = qdev_new("xlnx.xps-timer"); + qdev_prop_set_uint32(dev, "one-timer-only", 0); + qdev_prop_set_uint32(dev, "clock-frequency", 100000000); + sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal); + sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, TIMER_BASEADDR2); + sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0, irq[TIMER_IRQ2]); + + /* Emaclite */ + dev = qdev_new("xlnx.xps-ethernetlite"); + qemu_configure_nic_device(dev, true, NULL); + qdev_prop_set_uint32(dev, "tx-ping-pong", 0); + qdev_prop_set_uint32(dev, "rx-ping-pong", 0); + sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal); + sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, ETHLITE_BASEADDR); + sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0, irq[ETHLITE_IRQ]); + + /* axi ethernet and dma initialization. */ + eth0 = qdev_new("xlnx.axi-ethernet"); + dma = qdev_new("xlnx.axi-dma"); + + /* FIXME: attach to the sysbus instead */ + object_property_add_child(qdev_get_machine(), "xilinx-eth", OBJECT(eth0)); + object_property_add_child(qdev_get_machine(), "xilinx-dma", OBJECT(dma)); + + ds = object_property_get_link(OBJECT(dma), + "axistream-connected-target", NULL); + cs = object_property_get_link(OBJECT(dma), + "axistream-control-connected-target", NULL); + qemu_configure_nic_device(eth0, true, NULL); + qdev_prop_set_uint32(eth0, "rxmem", 0x1000); + qdev_prop_set_uint32(eth0, "txmem", 0x1000); + object_property_set_link(OBJECT(eth0), "axistream-connected", ds, + &error_abort); + object_property_set_link(OBJECT(eth0), "axistream-control-connected", cs, + &error_abort); + sysbus_realize_and_unref(SYS_BUS_DEVICE(eth0), &error_fatal); + sysbus_mmio_map(SYS_BUS_DEVICE(eth0), 0, AXIENET_BASEADDR); + sysbus_connect_irq(SYS_BUS_DEVICE(eth0), 0, irq[AXIENET_IRQ]); + + ds = object_property_get_link(OBJECT(eth0), + "axistream-connected-target", NULL); + cs = object_property_get_link(OBJECT(eth0), + "axistream-control-connected-target", NULL); + qdev_prop_set_uint32(dma, "freqhz", 100000000); + object_property_set_link(OBJECT(dma), "axistream-connected", ds, + &error_abort); + object_property_set_link(OBJECT(dma), "axistream-control-connected", cs, + &error_abort); + sysbus_realize_and_unref(SYS_BUS_DEVICE(dma), &error_fatal); + sysbus_mmio_map(SYS_BUS_DEVICE(dma), 0, AXIDMA_BASEADDR); + sysbus_connect_irq(SYS_BUS_DEVICE(dma), 0, irq[AXIDMA_IRQ0]); + sysbus_connect_irq(SYS_BUS_DEVICE(dma), 1, irq[AXIDMA_IRQ1]); + + /* unimplemented devices */ + create_unimplemented_device("gpio", GPIO_BASEADDR, 0x10000); + create_unimplemented_device("gpio2", GPIO_BASEADDR2, 0x10000); + create_unimplemented_device("gpio3", GPIO_BASEADDR3, 0x10000); + create_unimplemented_device("i2c", I2C_BASEADDR, 0x10000); + create_unimplemented_device("qspi", QSPI_BASEADDR, 0x10000); +} + +static void mb_v_generic_machine_init(MachineClass *mc) +{ + mc->desc = "AMD Microblaze-V generic platform"; + mc->init = mb_v_generic_init; + mc->min_cpus = 1; + mc->max_cpus = 1; + mc->default_cpu_type = TYPE_RISCV_CPU_BASE; + mc->default_cpus = 1; +} + +DEFINE_MACHINE("amd-microblaze-v-generic", mb_v_generic_machine_init) |