diff options
| -rw-r--r-- | hw/m68k/Kconfig | 1 | ||||
| -rw-r--r-- | hw/m68k/mcf5206.c | 2 | ||||
| -rw-r--r-- | hw/m68k/mcf5208.c | 6 | ||||
| -rw-r--r-- | hw/m68k/mcf_intc.c | 2 | ||||
| -rw-r--r-- | hw/m68k/next-cube.c | 1022 | ||||
| -rw-r--r-- | hw/m68k/next-kbd.c | 2 |
6 files changed, 665 insertions, 370 deletions
diff --git a/hw/m68k/Kconfig b/hw/m68k/Kconfig index 0092cda4e9..aff769b30f 100644 --- a/hw/m68k/Kconfig +++ b/hw/m68k/Kconfig @@ -18,6 +18,7 @@ config NEXTCUBE depends on M68K select FRAMEBUFFER select ESCC + select EMPTY_SLOT config Q800 bool diff --git a/hw/m68k/mcf5206.c b/hw/m68k/mcf5206.c index ef619cb9a4..c22e615f7a 100644 --- a/hw/m68k/mcf5206.c +++ b/hw/m68k/mcf5206.c @@ -582,7 +582,7 @@ static const MemoryRegionOps m5206_mbar_ops = { .write = m5206_mbar_writefn, .valid.min_access_size = 1, .valid.max_access_size = 4, - .endianness = DEVICE_NATIVE_ENDIAN, + .endianness = DEVICE_BIG_ENDIAN, }; static void mcf5206_mbar_realize(DeviceState *dev, Error **errp) diff --git a/hw/m68k/mcf5208.c b/hw/m68k/mcf5208.c index f290ccc739..409bb72574 100644 --- a/hw/m68k/mcf5208.c +++ b/hw/m68k/mcf5208.c @@ -155,7 +155,7 @@ static uint64_t m5208_timer_read(void *opaque, hwaddr addr, static const MemoryRegionOps m5208_timer_ops = { .read = m5208_timer_read, .write = m5208_timer_write, - .endianness = DEVICE_NATIVE_ENDIAN, + .endianness = DEVICE_BIG_ENDIAN, }; static uint64_t m5208_sys_read(void *opaque, hwaddr addr, @@ -192,7 +192,7 @@ static void m5208_sys_write(void *opaque, hwaddr addr, static const MemoryRegionOps m5208_sys_ops = { .read = m5208_sys_read, .write = m5208_sys_write, - .endianness = DEVICE_NATIVE_ENDIAN, + .endianness = DEVICE_BIG_ENDIAN, }; static uint64_t m5208_rcm_read(void *opaque, hwaddr addr, @@ -224,7 +224,7 @@ static void m5208_rcm_write(void *opaque, hwaddr addr, static const MemoryRegionOps m5208_rcm_ops = { .read = m5208_rcm_read, .write = m5208_rcm_write, - .endianness = DEVICE_NATIVE_ENDIAN, + .endianness = DEVICE_BIG_ENDIAN, }; static void mcf5208_sys_init(MemoryRegion *address_space, qemu_irq *pic, diff --git a/hw/m68k/mcf_intc.c b/hw/m68k/mcf_intc.c index 008626f813..7b9213947d 100644 --- a/hw/m68k/mcf_intc.c +++ b/hw/m68k/mcf_intc.c @@ -166,7 +166,7 @@ static void mcf_intc_reset(DeviceState *dev) static const MemoryRegionOps mcf_intc_ops = { .read = mcf_intc_read, .write = mcf_intc_write, - .endianness = DEVICE_NATIVE_ENDIAN, + .endianness = DEVICE_BIG_ENDIAN, }; static void mcf_intc_instance_init(Object *obj) diff --git a/hw/m68k/next-cube.c b/hw/m68k/next-cube.c index 0ecdcea823..0570e4a76f 100644 --- a/hw/m68k/next-cube.c +++ b/hw/m68k/next-cube.c @@ -2,6 +2,7 @@ * NeXT Cube System Driver * * Copyright (c) 2011 Bryce Lanham + * Copyright (c) 2024 Mark Cave-Ayland * * This code is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published @@ -22,6 +23,7 @@ #include "qom/object.h" #include "hw/char/escc.h" /* ZILOG 8530 Serial Emulation */ #include "hw/block/fdc.h" +#include "hw/misc/empty_slot.h" #include "hw/qdev-properties.h" #include "qapi/error.h" #include "qemu/error-report.h" @@ -37,31 +39,17 @@ #define DPRINTF(fmt, ...) do { } while (0) #endif -#define TYPE_NEXT_MACHINE MACHINE_TYPE_NAME("next-cube") -OBJECT_DECLARE_SIMPLE_TYPE(NeXTState, NEXT_MACHINE) - #define ENTRY 0x0100001e #define RAM_SIZE 0x4000000 #define ROM_FILE "Rev_2.5_v66.bin" -typedef struct next_dma { - uint32_t csr; - - uint32_t saved_next; - uint32_t saved_limit; - uint32_t saved_start; - uint32_t saved_stop; - uint32_t next; - uint32_t limit; - uint32_t start; - uint32_t stop; +#define TYPE_NEXT_RTC "next-rtc" +OBJECT_DECLARE_SIMPLE_TYPE(NeXTRTC, NEXT_RTC) - uint32_t next_initbuf; - uint32_t size; -} next_dma; +struct NeXTRTC { + SysBusDevice parent_obj; -typedef struct NextRtc { int8_t phase; uint8_t ram[32]; uint8_t command; @@ -69,18 +57,25 @@ typedef struct NextRtc { uint8_t status; uint8_t control; uint8_t retval; -} NextRtc; -struct NeXTState { - MachineState parent; + qemu_irq data_out_irq; + qemu_irq power_irq; +}; - MemoryRegion rom; - MemoryRegion rom2; - MemoryRegion dmamem; - MemoryRegion bmapm1; - MemoryRegion bmapm2; +#define TYPE_NEXT_SCSI "next-scsi" +OBJECT_DECLARE_SIMPLE_TYPE(NeXTSCSI, NEXT_SCSI) - next_dma dma[10]; +/* NeXT SCSI Controller */ +struct NeXTSCSI { + SysBusDevice parent_obj; + + MemoryRegion scsi_mem; + + SysBusESPState sysbus_esp; + + MemoryRegion scsi_csr_mem; + uint8_t scsi_csr_1; + uint8_t scsi_csr_2; }; #define TYPE_NEXT_PC "next-pc" @@ -92,6 +87,9 @@ struct NeXTPC { M68kCPU *cpu; + MemoryRegion floppy_mem; + MemoryRegion timer_mem; + MemoryRegion dummyen_mem; MemoryRegion mmiomem; MemoryRegion scrmem; @@ -101,13 +99,49 @@ struct NeXTPC { uint32_t int_mask; uint32_t int_status; uint32_t led; - uint8_t scsi_csr_1; - uint8_t scsi_csr_2; + + NeXTSCSI next_scsi; qemu_irq scsi_reset; qemu_irq scsi_dma; - NextRtc rtc; + ESCCState escc; + + NeXTRTC rtc; + qemu_irq rtc_data_irq; + qemu_irq rtc_cmd_reset_irq; +}; + +typedef struct next_dma { + uint32_t csr; + + uint32_t saved_next; + uint32_t saved_limit; + uint32_t saved_start; + uint32_t saved_stop; + + uint32_t next; + uint32_t limit; + uint32_t start; + uint32_t stop; + + uint32_t next_initbuf; + uint32_t size; +} next_dma; + +#define TYPE_NEXT_MACHINE MACHINE_TYPE_NAME("next-cube") +OBJECT_DECLARE_SIMPLE_TYPE(NeXTState, NEXT_MACHINE) + +struct NeXTState { + MachineState parent; + + MemoryRegion rom; + MemoryRegion rom2; + MemoryRegion dmamem; + MemoryRegion bmapm1; + MemoryRegion bmapm2; + + next_dma dma[10]; }; /* Thanks to NeXT forums for this */ @@ -144,120 +178,26 @@ static void next_scr2_led_update(NeXTPC *s) static void next_scr2_rtc_update(NeXTPC *s) { - uint8_t old_scr2, scr2_2; - NextRtc *rtc = &s->rtc; + uint8_t old_scr2_rtc, scr2_rtc; - old_scr2 = extract32(s->old_scr2, 8, 8); - scr2_2 = extract32(s->scr2, 8, 8); + old_scr2_rtc = extract32(s->old_scr2, 8, 8); + scr2_rtc = extract32(s->scr2, 8, 8); - if (scr2_2 & 0x1) { + if (scr2_rtc & 0x1) { /* DPRINTF("RTC %x phase %i\n", scr2_2, rtc->phase); */ - if (rtc->phase == -1) { - rtc->phase = 0; - } /* If we are in going down clock... do something */ - if (((old_scr2 & SCR2_RTCLK) != (scr2_2 & SCR2_RTCLK)) && - ((scr2_2 & SCR2_RTCLK) == 0)) { - if (rtc->phase < 8) { - rtc->command = (rtc->command << 1) | - ((scr2_2 & SCR2_RTDATA) ? 1 : 0); - } - if (rtc->phase >= 8 && rtc->phase < 16) { - rtc->value = (rtc->value << 1) | - ((scr2_2 & SCR2_RTDATA) ? 1 : 0); - - /* if we read RAM register, output RT_DATA bit */ - if (rtc->command <= 0x1F) { - scr2_2 = scr2_2 & (~SCR2_RTDATA); - if (rtc->ram[rtc->command] & (0x80 >> (rtc->phase - 8))) { - scr2_2 |= SCR2_RTDATA; - } - - rtc->retval = (rtc->retval << 1) | - ((scr2_2 & SCR2_RTDATA) ? 1 : 0); - } - /* read the status 0x30 */ - if (rtc->command == 0x30) { - scr2_2 = scr2_2 & (~SCR2_RTDATA); - /* for now status = 0x98 (new rtc + FTU) */ - if (rtc->status & (0x80 >> (rtc->phase - 8))) { - scr2_2 |= SCR2_RTDATA; - } - - rtc->retval = (rtc->retval << 1) | - ((scr2_2 & SCR2_RTDATA) ? 1 : 0); - } - /* read the status 0x31 */ - if (rtc->command == 0x31) { - scr2_2 = scr2_2 & (~SCR2_RTDATA); - if (rtc->control & (0x80 >> (rtc->phase - 8))) { - scr2_2 |= SCR2_RTDATA; - } - rtc->retval = (rtc->retval << 1) | - ((scr2_2 & SCR2_RTDATA) ? 1 : 0); - } - - if ((rtc->command >= 0x20) && (rtc->command <= 0x2F)) { - scr2_2 = scr2_2 & (~SCR2_RTDATA); - /* for now 0x00 */ - time_t time_h = time(NULL); - struct tm *info = localtime(&time_h); - int ret = 0; - - switch (rtc->command) { - case 0x20: - ret = SCR2_TOBCD(info->tm_sec); - break; - case 0x21: - ret = SCR2_TOBCD(info->tm_min); - break; - case 0x22: - ret = SCR2_TOBCD(info->tm_hour); - break; - case 0x24: - ret = SCR2_TOBCD(info->tm_mday); - break; - case 0x25: - ret = SCR2_TOBCD((info->tm_mon + 1)); - break; - case 0x26: - ret = SCR2_TOBCD((info->tm_year - 100)); - break; - - } - - if (ret & (0x80 >> (rtc->phase - 8))) { - scr2_2 |= SCR2_RTDATA; - } - rtc->retval = (rtc->retval << 1) | - ((scr2_2 & SCR2_RTDATA) ? 1 : 0); - } - - } - - rtc->phase++; - if (rtc->phase == 16) { - if (rtc->command >= 0x80 && rtc->command <= 0x9F) { - rtc->ram[rtc->command - 0x80] = rtc->value; - } - /* write to x30 register */ - if (rtc->command == 0xB1) { - /* clear FTU */ - if (rtc->value & 0x04) { - rtc->status = rtc->status & (~0x18); - s->int_status = s->int_status & (~0x04); - } - } + if (((old_scr2_rtc & SCR2_RTCLK) != (scr2_rtc & SCR2_RTCLK)) && + ((scr2_rtc & SCR2_RTCLK) == 0)) { + if (scr2_rtc & SCR2_RTDATA) { + qemu_irq_raise(s->rtc_data_irq); + } else { + qemu_irq_lower(s->rtc_data_irq); } } } else { /* else end or abort */ - rtc->phase = -1; - rtc->command = 0; - rtc->value = 0; + qemu_irq_raise(s->rtc_cmd_reset_irq); } - - s->scr2 = deposit32(s->scr2, 8, 8, scr2_2); } static uint64_t next_mmio_read(void *opaque, hwaddr addr, unsigned size) @@ -266,30 +206,26 @@ static uint64_t next_mmio_read(void *opaque, hwaddr addr, unsigned size) uint64_t val; switch (addr) { - case 0x7000: + case 0x2000: /* 0x2007000 */ /* DPRINTF("Read INT status: %x\n", s->int_status); */ val = s->int_status; break; - case 0x7800: + case 0x2800: /* 0x2007800 */ DPRINTF("MMIO Read INT mask: %x\n", s->int_mask); val = s->int_mask; break; - case 0xc000 ... 0xc003: - val = extract32(s->scr1, (4 - (addr - 0xc000) - size) << 3, + case 0x7000 ... 0x7003: /* 0x200c000 */ + val = extract32(s->scr1, (4 - (addr - 0x7000) - size) << 3, size << 3); break; - case 0xd000 ... 0xd003: - val = extract32(s->scr2, (4 - (addr - 0xd000) - size) << 3, + case 0x8000 ... 0x8003: /* 0x200d000 */ + val = extract32(s->scr2, (4 - (addr - 0x8000) - size) << 3, size << 3); break; - case 0x14020: - val = 0x7f; - break; - default: val = 0; DPRINTF("MMIO Read @ 0x%"HWADDR_PRIx" size %d\n", addr, size); @@ -305,25 +241,25 @@ static void next_mmio_write(void *opaque, hwaddr addr, uint64_t val, NeXTPC *s = NEXT_PC(opaque); switch (addr) { - case 0x7000: + case 0x2000: /* 0x2007000 */ DPRINTF("INT Status old: %x new: %x\n", s->int_status, (unsigned int)val); s->int_status = val; break; - case 0x7800: + case 0x2800: /* 0x2007800 */ DPRINTF("INT Mask old: %x new: %x\n", s->int_mask, (unsigned int)val); s->int_mask = val; break; - case 0xc000 ... 0xc003: + case 0x7000 ... 0x7003: /* 0x200c000 */ DPRINTF("SCR1 Write: %x\n", (unsigned int)val); - s->scr1 = deposit32(s->scr1, (4 - (addr - 0xc000) - size) << 3, + s->scr1 = deposit32(s->scr1, (4 - (addr - 0x7000) - size) << 3, size << 3, val); break; - case 0xd000 ... 0xd003: - s->scr2 = deposit32(s->scr2, (4 - (addr - 0xd000) - size) << 3, + case 0x8000 ... 0x8003: /* 0x200d000 */ + s->scr2 = deposit32(s->scr2, (4 - (addr - 0x8000) - size) << 3, size << 3, val); next_scr2_led_update(s); next_scr2_rtc_update(s); @@ -351,143 +287,6 @@ static const MemoryRegionOps next_mmio_ops = { #define SCSICSR_CPUDMA 0x10 /* if set, dma enabled */ #define SCSICSR_INTMASK 0x20 /* if set, interrupt enabled */ -static uint64_t next_scr_readfn(void *opaque, hwaddr addr, unsigned size) -{ - NeXTPC *s = NEXT_PC(opaque); - uint64_t val; - - switch (addr) { - case 0x14108: - DPRINTF("FD read @ %x\n", (unsigned int)addr); - val = 0x40 | 0x04 | 0x2 | 0x1; - break; - - case 0x14020: - DPRINTF("SCSI 4020 STATUS READ %X\n", s->scsi_csr_1); - val = s->scsi_csr_1; - break; - - case 0x14021: - DPRINTF("SCSI 4021 STATUS READ %X\n", s->scsi_csr_2); - val = 0x40; - break; - - /* - * These 4 registers are the hardware timer, not sure which register - * is the latch instead of data, but no problems so far. - * - * Hack: We need to have the LSB change consistently to make it work - */ - case 0x1a000 ... 0x1a003: - val = extract32(clock(), (4 - (addr - 0x1a000) - size) << 3, - size << 3); - break; - - /* For now return dummy byte to allow the Ethernet test to timeout */ - case 0x6000: - val = 0xff; - break; - - default: - DPRINTF("BMAP Read @ 0x%x size %u\n", (unsigned int)addr, size); - val = 0; - break; - } - - return val; -} - -static void next_scr_writefn(void *opaque, hwaddr addr, uint64_t val, - unsigned size) -{ - NeXTPC *s = NEXT_PC(opaque); - - switch (addr) { - case 0x14108: - DPRINTF("FDCSR Write: %"PRIx64 "\n", val); - if (val == 0x0) { - /* qemu_irq_raise(s->fd_irq[0]); */ - } - break; - - case 0x14020: /* SCSI Control Register */ - if (val & SCSICSR_FIFOFL) { - DPRINTF("SCSICSR FIFO Flush\n"); - /* will have to add another irq to the esp if this is needed */ - /* esp_puflush_fifo(esp_g); */ - } - - if (val & SCSICSR_ENABLE) { - DPRINTF("SCSICSR Enable\n"); - /* - * qemu_irq_raise(s->scsi_dma); - * s->scsi_csr_1 = 0xc0; - * s->scsi_csr_1 |= 0x1; - * qemu_irq_pulse(s->scsi_dma); - */ - } - /* - * else - * s->scsi_csr_1 &= ~SCSICSR_ENABLE; - */ - - if (val & SCSICSR_RESET) { - DPRINTF("SCSICSR Reset\n"); - /* I think this should set DMADIR. CPUDMA and INTMASK to 0 */ - qemu_irq_raise(s->scsi_reset); - s->scsi_csr_1 &= ~(SCSICSR_INTMASK | 0x80 | 0x1); - qemu_irq_lower(s->scsi_reset); - } - if (val & SCSICSR_DMADIR) { - DPRINTF("SCSICSR DMAdir\n"); - } - if (val & SCSICSR_CPUDMA) { - DPRINTF("SCSICSR CPUDMA\n"); - /* qemu_irq_raise(s->scsi_dma); */ - s->int_status |= 0x4000000; - } else { - /* fprintf(stderr,"SCSICSR CPUDMA disabled\n"); */ - s->int_status &= ~(0x4000000); - /* qemu_irq_lower(s->scsi_dma); */ - } - if (val & SCSICSR_INTMASK) { - DPRINTF("SCSICSR INTMASK\n"); - /* - * int_mask &= ~0x1000; - * s->scsi_csr_1 |= val; - * s->scsi_csr_1 &= ~SCSICSR_INTMASK; - * if (s->scsi_queued) { - * s->scsi_queued = 0; - * next_irq(s, NEXT_SCSI_I, level); - * } - */ - } else { - /* int_mask |= 0x1000; */ - } - if (val & 0x80) { - /* int_mask |= 0x1000; */ - /* s->scsi_csr_1 |= 0x80; */ - } - DPRINTF("SCSICSR Write: %"PRIx64 "\n", val); - /* s->scsi_csr_1 = val; */ - break; - - /* Hardware timer latch - not implemented yet */ - case 0x1a000: - default: - DPRINTF("BMAP Write @ 0x%x with 0x%"PRIx64 " size %u\n", - (unsigned int)addr, val, size); - } -} - -static const MemoryRegionOps next_scr_ops = { - .read = next_scr_readfn, - .write = next_scr_writefn, - .valid.min_access_size = 1, - .valid.max_access_size = 4, - .endianness = DEVICE_BIG_ENDIAN, -}; - #define NEXTDMA_SCSI(x) (0x10 + x) #define NEXTDMA_FD(x) (0x10 + x) #define NEXTDMA_ENTX(x) (0x110 + x) @@ -828,84 +627,580 @@ static void nextscsi_write(void *opaque, uint8_t *buf, int size) nextdma_write(opaque, buf, size, NEXTDMA_SCSI); } -static void next_scsi_init(DeviceState *pcdev) +static void next_scsi_csr_write(void *opaque, hwaddr addr, uint64_t val, + unsigned size) +{ + NeXTSCSI *s = NEXT_SCSI(opaque); + NeXTPC *pc = NEXT_PC(container_of(s, NeXTPC, next_scsi)); + + switch (addr) { + case 0: + if (val & SCSICSR_FIFOFL) { + DPRINTF("SCSICSR FIFO Flush\n"); + /* will have to add another irq to the esp if this is needed */ + /* esp_puflush_fifo(esp_g); */ + } + + if (val & SCSICSR_ENABLE) { + DPRINTF("SCSICSR Enable\n"); + /* + * qemu_irq_raise(s->scsi_dma); + * s->scsi_csr_1 = 0xc0; + * s->scsi_csr_1 |= 0x1; + * qemu_irq_pulse(s->scsi_dma); + */ + } + /* + * else + * s->scsi_csr_1 &= ~SCSICSR_ENABLE; + */ + + if (val & SCSICSR_RESET) { + DPRINTF("SCSICSR Reset\n"); + /* I think this should set DMADIR. CPUDMA and INTMASK to 0 */ + qemu_irq_raise(pc->scsi_reset); + s->scsi_csr_1 &= ~(SCSICSR_INTMASK | 0x80 | 0x1); + qemu_irq_lower(pc->scsi_reset); + } + if (val & SCSICSR_DMADIR) { + DPRINTF("SCSICSR DMAdir\n"); + } + if (val & SCSICSR_CPUDMA) { + DPRINTF("SCSICSR CPUDMA\n"); + /* qemu_irq_raise(s->scsi_dma); */ + pc->int_status |= 0x4000000; + } else { + /* fprintf(stderr,"SCSICSR CPUDMA disabled\n"); */ + pc->int_status &= ~(0x4000000); + /* qemu_irq_lower(s->scsi_dma); */ + } + if (val & SCSICSR_INTMASK) { + DPRINTF("SCSICSR INTMASK\n"); + /* + * int_mask &= ~0x1000; + * s->scsi_csr_1 |= val; + * s->scsi_csr_1 &= ~SCSICSR_INTMASK; + * if (s->scsi_queued) { + * s->scsi_queued = 0; + * next_irq(s, NEXT_SCSI_I, level); + * } + */ + } else { + /* int_mask |= 0x1000; */ + } + if (val & 0x80) { + /* int_mask |= 0x1000; */ + /* s->scsi_csr_1 |= 0x80; */ + } + DPRINTF("SCSICSR1 Write: %"PRIx64 "\n", val); + s->scsi_csr_1 = val; + break; + + case 1: + DPRINTF("SCSICSR2 Write: %"PRIx64 "\n", val); + s->scsi_csr_2 = val; + break; + + default: + g_assert_not_reached(); + } +} + +static uint64_t next_scsi_csr_read(void *opaque, hwaddr addr, unsigned size) { - struct NeXTPC *next_pc = NEXT_PC(pcdev); - DeviceState *dev; - SysBusDevice *sysbusdev; + NeXTSCSI *s = NEXT_SCSI(opaque); + uint64_t val; + + switch (addr) { + case 0: + DPRINTF("SCSI 4020 STATUS READ %X\n", s->scsi_csr_1); + val = s->scsi_csr_1; + break; + + case 1: + DPRINTF("SCSI 4021 STATUS READ %X\n", s->scsi_csr_2); + val = s->scsi_csr_2; + break; + + default: + g_assert_not_reached(); + } + + return val; +} + +static const MemoryRegionOps next_scsi_csr_ops = { + .read = next_scsi_csr_read, + .write = next_scsi_csr_write, + .valid.min_access_size = 1, + .valid.max_access_size = 1, + .endianness = DEVICE_BIG_ENDIAN, +}; + +static void next_scsi_init(Object *obj) +{ + NeXTSCSI *s = NEXT_SCSI(obj); + SysBusDevice *sbd = SYS_BUS_DEVICE(obj); + + object_initialize_child(obj, "esp", &s->sysbus_esp, TYPE_SYSBUS_ESP); + + memory_region_init_io(&s->scsi_csr_mem, obj, &next_scsi_csr_ops, + s, "csrs", 2); + + memory_region_init(&s->scsi_mem, obj, "next.scsi", 0x40); + sysbus_init_mmio(sbd, &s->scsi_mem); +} + +static void next_scsi_realize(DeviceState *dev, Error **errp) +{ + NeXTSCSI *s = NEXT_SCSI(dev); SysBusESPState *sysbus_esp; + SysBusDevice *sbd; ESPState *esp; + NeXTPC *pcdev; + + pcdev = NEXT_PC(container_of(s, NeXTPC, next_scsi)); - dev = qdev_new(TYPE_SYSBUS_ESP); - sysbus_esp = SYSBUS_ESP(dev); + /* ESP */ + sysbus_esp = SYSBUS_ESP(&s->sysbus_esp); esp = &sysbus_esp->esp; esp->dma_memory_read = nextscsi_read; esp->dma_memory_write = nextscsi_write; esp->dma_opaque = pcdev; sysbus_esp->it_shift = 0; esp->dma_enabled = 1; - sysbusdev = SYS_BUS_DEVICE(dev); - sysbus_realize_and_unref(sysbusdev, &error_fatal); - sysbus_connect_irq(sysbusdev, 0, qdev_get_gpio_in(pcdev, NEXT_SCSI_I)); - sysbus_mmio_map(sysbusdev, 0, 0x2114000); + sbd = SYS_BUS_DEVICE(sysbus_esp); + if (!sysbus_realize(sbd, errp)) { + return; + } + memory_region_add_subregion(&s->scsi_mem, 0x0, + sysbus_mmio_get_region(sbd, 0)); - next_pc->scsi_reset = qdev_get_gpio_in(dev, 0); - next_pc->scsi_dma = qdev_get_gpio_in(dev, 1); + /* SCSI CSRs */ + memory_region_add_subregion(&s->scsi_mem, 0x20, &s->scsi_csr_mem); - scsi_bus_legacy_handle_cmdline(&esp->bus); + scsi_bus_legacy_handle_cmdline(&s->sysbus_esp.esp.bus); } -static void next_escc_init(DeviceState *pcdev) +static const VMStateDescription next_scsi_vmstate = { + .name = "next-scsi", + .version_id = 0, + .minimum_version_id = 0, + .fields = (const VMStateField[]) { + VMSTATE_UINT8(scsi_csr_1, NeXTSCSI), + VMSTATE_UINT8(scsi_csr_2, NeXTSCSI), + VMSTATE_END_OF_LIST() + }, +}; + +static void next_scsi_class_init(ObjectClass *klass, void *data) { - DeviceState *dev; - SysBusDevice *s; - - dev = qdev_new(TYPE_ESCC); - qdev_prop_set_uint32(dev, "disabled", 0); - qdev_prop_set_uint32(dev, "frequency", 9600 * 384); - qdev_prop_set_uint32(dev, "it_shift", 0); - qdev_prop_set_bit(dev, "bit_swap", true); - qdev_prop_set_chr(dev, "chrB", serial_hd(1)); - qdev_prop_set_chr(dev, "chrA", serial_hd(0)); - qdev_prop_set_uint32(dev, "chnBtype", escc_serial); - qdev_prop_set_uint32(dev, "chnAtype", escc_serial); - - s = SYS_BUS_DEVICE(dev); - sysbus_realize_and_unref(s, &error_fatal); - sysbus_connect_irq(s, 0, qdev_get_gpio_in(pcdev, NEXT_SCC_I)); - sysbus_connect_irq(s, 1, qdev_get_gpio_in(pcdev, NEXT_SCC_DMA_I)); - sysbus_mmio_map(s, 0, 0x2118000); + DeviceClass *dc = DEVICE_CLASS(klass); + + dc->desc = "NeXT SCSI Controller"; + dc->realize = next_scsi_realize; + dc->vmsd = &next_scsi_vmstate; } -static void next_pc_reset(DeviceState *dev) +static const TypeInfo next_scsi_info = { + .name = TYPE_NEXT_SCSI, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_init = next_scsi_init, + .instance_size = sizeof(NeXTSCSI), + .class_init = next_scsi_class_init, +}; + +static void next_floppy_write(void *opaque, hwaddr addr, uint64_t val, + unsigned size) { - NeXTPC *s = NEXT_PC(dev); + switch (addr) { + case 0: + DPRINTF("FDCSR Write: %"PRIx64 "\n", val); + if (val == 0x0) { + /* qemu_irq_raise(s->fd_irq[0]); */ + } + break; + + default: + g_assert_not_reached(); + } +} + +static uint64_t next_floppy_read(void *opaque, hwaddr addr, unsigned size) +{ + uint64_t val; + + switch (addr) { + case 0: + DPRINTF("FD read @ %x\n", (unsigned int)addr); + val = 0x40 | 0x04 | 0x2 | 0x1; + break; + + default: + g_assert_not_reached(); + } + + return val; +} + +static const MemoryRegionOps next_floppy_ops = { + .read = next_floppy_read, + .write = next_floppy_write, + .valid.min_access_size = 1, + .valid.max_access_size = 4, + .endianness = DEVICE_BIG_ENDIAN, +}; + +static void next_timer_write(void *opaque, hwaddr addr, uint64_t val, + unsigned size) +{ + switch (addr) { + case 0 ... 3: + /* Hardware timer latch - not implemented yet */ + break; + + default: + g_assert_not_reached(); + } +} + +static uint64_t next_timer_read(void *opaque, hwaddr addr, unsigned size) +{ + uint64_t val; + + switch (addr) { + case 0 ... 3: + /* + * These 4 registers are the hardware timer, not sure which register + * is the latch instead of data, but no problems so far. + * + * Hack: We need to have the LSB change consistently to make it work + */ + val = extract32(clock(), (4 - addr - size) << 3, + size << 3); + break; + + default: + g_assert_not_reached(); + } + + return val; +} + +static const MemoryRegionOps next_timer_ops = { + .read = next_timer_read, + .write = next_timer_write, + .valid.min_access_size = 1, + .valid.max_access_size = 4, + .endianness = DEVICE_BIG_ENDIAN, +}; + +static void next_dummy_en_write(void *opaque, hwaddr addr, uint64_t val, + unsigned size) +{ + /* Do nothing */ + return; +} + +static uint64_t next_dummy_en_read(void *opaque, hwaddr addr, unsigned size) +{ + uint64_t val; + + switch (addr) { + case 0: + /* For now return dummy byte to allow the Ethernet test to timeout */ + val = 0xff; + break; + + default: + val = 0; + } + + return val; +} + +static const MemoryRegionOps next_dummy_en_ops = { + .read = next_dummy_en_read, + .write = next_dummy_en_write, + .valid.min_access_size = 1, + .valid.max_access_size = 4, + .endianness = DEVICE_BIG_ENDIAN, +}; + +static bool next_rtc_cmd_is_write(uint8_t cmd) +{ + return (cmd >= 0x80 && cmd <= 0x9f) || + (cmd == 0xb1); +} + +static void next_rtc_data_in_irq(void *opaque, int n, int level) +{ + NeXTRTC *rtc = NEXT_RTC(opaque); + + if (rtc->phase < 8) { + rtc->command = (rtc->command << 1) | level; + + if (rtc->phase == 7 && !next_rtc_cmd_is_write(rtc->command)) { + if (rtc->command <= 0x1f) { + /* RAM registers */ + rtc->retval = rtc->ram[rtc->command]; + } + if ((rtc->command >= 0x20) && (rtc->command <= 0x2f)) { + /* RTC */ + time_t time_h = time(NULL); + struct tm *info = localtime(&time_h); + rtc->retval = 0; + + switch (rtc->command) { + case 0x20: + rtc->retval = SCR2_TOBCD(info->tm_sec); + break; + case 0x21: + rtc->retval = SCR2_TOBCD(info->tm_min); + break; + case 0x22: + rtc->retval = SCR2_TOBCD(info->tm_hour); + break; + case 0x24: + rtc->retval = SCR2_TOBCD(info->tm_mday); + break; + case 0x25: + rtc->retval = SCR2_TOBCD((info->tm_mon + 1)); + break; + case 0x26: + rtc->retval = SCR2_TOBCD((info->tm_year - 100)); + break; + } + } + if (rtc->command == 0x30) { + /* read the status 0x30 */ + rtc->retval = rtc->status; + } + if (rtc->command == 0x31) { + /* read the control 0x31 */ + rtc->retval = rtc->control; + } + } + } + if (rtc->phase >= 8 && rtc->phase < 16) { + if (next_rtc_cmd_is_write(rtc->command)) { + /* Shift in value to write */ + rtc->value = (rtc->value << 1) | level; + } else { + /* Shift out value to read */ + if (rtc->retval & (0x80 >> (rtc->phase - 8))) { + qemu_irq_raise(rtc->data_out_irq); + } else { + qemu_irq_lower(rtc->data_out_irq); + } + } + } + + rtc->phase++; + if (rtc->phase == 16 && next_rtc_cmd_is_write(rtc->command)) { + if (rtc->command >= 0x80 && rtc->command <= 0x9f) { + /* RAM registers */ + rtc->ram[rtc->command - 0x80] = rtc->value; + } + if (rtc->command == 0xb1) { + /* write to 0x30 register */ + if (rtc->value & 0x04) { + /* clear FTU */ + rtc->status = rtc->status & (~0x18); + qemu_irq_lower(rtc->power_irq); + } + } + } +} + +static void next_rtc_cmd_reset_irq(void *opaque, int n, int level) +{ + NeXTRTC *rtc = NEXT_RTC(opaque); + + if (level) { + rtc->phase = 0; + rtc->command = 0; + rtc->value = 0; + } +} + +static void next_rtc_reset_hold(Object *obj, ResetType type) +{ + NeXTRTC *rtc = NEXT_RTC(obj); + + rtc->status = 0x90; + + /* Load RTC RAM - TODO: provide possibility to load contents from file */ + memcpy(rtc->ram, rtc_ram2, 32); +} + +static void next_rtc_init(Object *obj) +{ + NeXTRTC *rtc = NEXT_RTC(obj); + + qdev_init_gpio_in_named(DEVICE(obj), next_rtc_data_in_irq, + "rtc-data-in", 1); + qdev_init_gpio_out_named(DEVICE(obj), &rtc->data_out_irq, + "rtc-data-out", 1); + qdev_init_gpio_in_named(DEVICE(obj), next_rtc_cmd_reset_irq, + "rtc-cmd-reset", 1); + qdev_init_gpio_out_named(DEVICE(obj), &rtc->power_irq, + "rtc-power-out", 1); +} + +static const VMStateDescription next_rtc_vmstate = { + .name = "next-rtc", + .version_id = 3, + .minimum_version_id = 3, + .fields = (const VMStateField[]) { + VMSTATE_INT8(phase, NeXTRTC), + VMSTATE_UINT8_ARRAY(ram, NeXTRTC, 32), + VMSTATE_UINT8(command, NeXTRTC), + VMSTATE_UINT8(value, NeXTRTC), + VMSTATE_UINT8(status, NeXTRTC), + VMSTATE_UINT8(control, NeXTRTC), + VMSTATE_UINT8(retval, NeXTRTC), + VMSTATE_END_OF_LIST() + }, +}; + +static void next_rtc_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + ResettableClass *rc = RESETTABLE_CLASS(klass); + + dc->desc = "NeXT RTC"; + dc->vmsd = &next_rtc_vmstate; + rc->phases.hold = next_rtc_reset_hold; +} + +static const TypeInfo next_rtc_info = { + .name = TYPE_NEXT_RTC, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_init = next_rtc_init, + .instance_size = sizeof(NeXTRTC), + .class_init = next_rtc_class_init, +}; + +static void next_pc_rtc_data_in_irq(void *opaque, int n, int level) +{ + NeXTPC *s = NEXT_PC(opaque); + uint8_t scr2_2 = extract32(s->scr2, 8, 8); + + if (level) { + scr2_2 |= SCR2_RTDATA; + } else { + scr2_2 &= ~SCR2_RTDATA; + } + + s->scr2 = deposit32(s->scr2, 8, 8, scr2_2); +} + +static void next_pc_reset_hold(Object *obj, ResetType type) +{ + NeXTPC *s = NEXT_PC(obj); /* Set internal registers to initial values */ /* 0x0000XX00 << vital bits */ s->scr1 = 0x00011102; s->scr2 = 0x00ff0c80; s->old_scr2 = s->scr2; - - s->rtc.status = 0x90; - - /* Load RTC RAM - TODO: provide possibility to load contents from file */ - memcpy(s->rtc.ram, rtc_ram2, 32); } static void next_pc_realize(DeviceState *dev, Error **errp) { NeXTPC *s = NEXT_PC(dev); - SysBusDevice *sbd = SYS_BUS_DEVICE(dev); + SysBusDevice *sbd; + DeviceState *d; + + /* SCSI */ + sbd = SYS_BUS_DEVICE(&s->next_scsi); + if (!sysbus_realize(sbd, errp)) { + return; + } - qdev_init_gpio_in(dev, next_irq, NEXT_NUM_IRQS); + d = DEVICE(object_resolve_path_component(OBJECT(&s->next_scsi), "esp")); + sysbus_connect_irq(SYS_BUS_DEVICE(d), 0, + qdev_get_gpio_in(DEVICE(s), NEXT_SCSI_I)); + + s->scsi_reset = qdev_get_gpio_in(d, 0); + s->scsi_dma = qdev_get_gpio_in(d, 1); + + /* ESCC */ + d = DEVICE(&s->escc); + qdev_prop_set_uint32(d, "disabled", 0); + qdev_prop_set_uint32(d, "frequency", 9600 * 384); + qdev_prop_set_uint32(d, "it_shift", 0); + qdev_prop_set_bit(d, "bit_swap", true); + qdev_prop_set_chr(d, "chrB", serial_hd(1)); + qdev_prop_set_chr(d, "chrA", serial_hd(0)); + qdev_prop_set_uint32(d, "chnBtype", escc_serial); + qdev_prop_set_uint32(d, "chnAtype", escc_serial); + + sbd = SYS_BUS_DEVICE(d); + if (!sysbus_realize(sbd, errp)) { + return; + } + sysbus_connect_irq(sbd, 0, qdev_get_gpio_in(dev, NEXT_SCC_I)); + sysbus_connect_irq(sbd, 1, qdev_get_gpio_in(dev, NEXT_SCC_DMA_I)); + + /* RTC */ + d = DEVICE(&s->rtc); + if (!sysbus_realize(SYS_BUS_DEVICE(d), errp)) { + return; + } + /* Data from NeXTPC to RTC */ + qdev_connect_gpio_out_named(dev, "rtc-data-out", 0, + qdev_get_gpio_in_named(d, "rtc-data-in", 0)); + /* Data from RTC to NeXTPC */ + qdev_connect_gpio_out_named(d, "rtc-data-out", 0, + qdev_get_gpio_in_named(dev, + "rtc-data-in", 0)); + qdev_connect_gpio_out_named(dev, "rtc-cmd-reset", 0, + qdev_get_gpio_in_named(d, "rtc-cmd-reset", 0)); + qdev_connect_gpio_out_named(d, "rtc-power-out", 0, + qdev_get_gpio_in(dev, NEXT_PWR_I)); +} + +static void next_pc_init(Object *obj) +{ + NeXTPC *s = NEXT_PC(obj); + SysBusDevice *sbd = SYS_BUS_DEVICE(obj); + + qdev_init_gpio_in(DEVICE(obj), next_irq, NEXT_NUM_IRQS); memory_region_init_io(&s->mmiomem, OBJECT(s), &next_mmio_ops, s, - "next.mmio", 0xd0000); - memory_region_init_io(&s->scrmem, OBJECT(s), &next_scr_ops, s, - "next.scr", 0x20000); + "next.mmio", 0x9000); sysbus_init_mmio(sbd, &s->mmiomem); - sysbus_init_mmio(sbd, &s->scrmem); + + memory_region_init_io(&s->dummyen_mem, OBJECT(s), &next_dummy_en_ops, s, + "next.en", 0x20); + sysbus_init_mmio(sbd, &s->dummyen_mem); + + object_initialize_child(obj, "next-scsi", &s->next_scsi, TYPE_NEXT_SCSI); + sysbus_init_mmio(sbd, + sysbus_mmio_get_region(SYS_BUS_DEVICE(&s->next_scsi), 0)); + + memory_region_init_io(&s->floppy_mem, OBJECT(s), &next_floppy_ops, s, + "next.floppy", 4); + sysbus_init_mmio(sbd, &s->floppy_mem); + + object_initialize_child(obj, "escc", &s->escc, TYPE_ESCC); + sysbus_init_mmio(sbd, + sysbus_mmio_get_region(SYS_BUS_DEVICE(&s->escc), 0)); + + memory_region_init_io(&s->timer_mem, OBJECT(s), &next_timer_ops, s, + "next.timer", 4); + sysbus_init_mmio(sbd, &s->timer_mem); + + object_initialize_child(obj, "rtc", &s->rtc, TYPE_NEXT_RTC); + + qdev_init_gpio_in_named(DEVICE(obj), next_pc_rtc_data_in_irq, + "rtc-data-in", 1); + qdev_init_gpio_out_named(DEVICE(obj), &s->rtc_data_irq, + "rtc-data-out", 1); + qdev_init_gpio_out_named(DEVICE(obj), &s->rtc_cmd_reset_irq, + "rtc-cmd-reset", 1); } /* @@ -918,26 +1213,10 @@ static const Property next_pc_properties[] = { DEFINE_PROP_LINK("cpu", NeXTPC, cpu, TYPE_M68K_CPU, M68kCPU *), }; -static const VMStateDescription next_rtc_vmstate = { - .name = "next-rtc", - .version_id = 2, - .minimum_version_id = 2, - .fields = (const VMStateField[]) { - VMSTATE_INT8(phase, NextRtc), - VMSTATE_UINT8_ARRAY(ram, NextRtc, 32), - VMSTATE_UINT8(command, NextRtc), - VMSTATE_UINT8(value, NextRtc), - VMSTATE_UINT8(status, NextRtc), - VMSTATE_UINT8(control, NextRtc), - VMSTATE_UINT8(retval, NextRtc), - VMSTATE_END_OF_LIST() - }, -}; - static const VMStateDescription next_pc_vmstate = { .name = "next-pc", - .version_id = 2, - .minimum_version_id = 2, + .version_id = 4, + .minimum_version_id = 4, .fields = (const VMStateField[]) { VMSTATE_UINT32(scr1, NeXTPC), VMSTATE_UINT32(scr2, NeXTPC), @@ -945,9 +1224,6 @@ static const VMStateDescription next_pc_vmstate = { VMSTATE_UINT32(int_mask, NeXTPC), VMSTATE_UINT32(int_status, NeXTPC), VMSTATE_UINT32(led, NeXTPC), - VMSTATE_UINT8(scsi_csr_1, NeXTPC), - VMSTATE_UINT8(scsi_csr_2, NeXTPC), - VMSTATE_STRUCT(rtc, NeXTPC, 0, next_rtc_vmstate, NextRtc), VMSTATE_END_OF_LIST() }, }; @@ -955,17 +1231,19 @@ static const VMStateDescription next_pc_vmstate = { static void next_pc_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); + ResettableClass *rc = RESETTABLE_CLASS(klass); dc->desc = "NeXT Peripheral Controller"; dc->realize = next_pc_realize; - device_class_set_legacy_reset(dc, next_pc_reset); device_class_set_props(dc, next_pc_properties); dc->vmsd = &next_pc_vmstate; + rc->phases.hold = next_pc_reset_hold; } static const TypeInfo next_pc_info = { .name = TYPE_NEXT_PC, .parent = TYPE_SYS_BUS_DEVICE, + .instance_init = next_pc_init, .instance_size = sizeof(NeXTPC), .class_init = next_pc_class_init, }; @@ -1003,11 +1281,32 @@ static void next_cube_init(MachineState *machine) sysbus_create_simple(TYPE_NEXTFB, 0x0B000000, NULL); /* MMIO */ - sysbus_mmio_map(SYS_BUS_DEVICE(pcdev), 0, 0x02000000); + sysbus_mmio_map(SYS_BUS_DEVICE(pcdev), 0, 0x02005000); /* BMAP IO - acts as a catch-all for now */ sysbus_mmio_map(SYS_BUS_DEVICE(pcdev), 1, 0x02100000); + /* en network (dummy) */ + sysbus_mmio_map(SYS_BUS_DEVICE(pcdev), 1, 0x02106000); + + /* unknown: Brightness control register? */ + empty_slot_init("next.unknown.0", 0x02110000, 0x10); + /* unknown: Magneto-Optical drive controller? */ + empty_slot_init("next.unknown.1", 0x02112000, 0x10); + + /* SCSI */ + sysbus_mmio_map(SYS_BUS_DEVICE(pcdev), 2, 0x02114000); + /* Floppy */ + sysbus_mmio_map(SYS_BUS_DEVICE(pcdev), 3, 0x02114108); + /* ESCC */ + sysbus_mmio_map(SYS_BUS_DEVICE(pcdev), 4, 0x02118000); + + /* unknown: Serial clock configuration register? */ + empty_slot_init("next.unknown.2", 0x02118004, 0x10); + + /* Timer */ + sysbus_mmio_map(SYS_BUS_DEVICE(pcdev), 5, 0x0211a000); + /* BMAP memory */ memory_region_init_ram_flags_nomigrate(&m->bmapm1, NULL, "next.bmapmem", 64, RAM_SHARED, &error_fatal); @@ -1043,14 +1342,6 @@ static void next_cube_init(MachineState *machine) } } - /* Serial */ - next_escc_init(pcdev); - - /* TODO: */ - /* Network */ - /* SCSI */ - next_scsi_init(pcdev); - /* DMA */ memory_region_init_io(&m->dmamem, NULL, &next_dma_ops, machine, "next.dma", 0x5000); @@ -1067,6 +1358,7 @@ static void next_machine_class_init(ObjectClass *oc, void *data) mc->default_ram_size = RAM_SIZE; mc->default_ram_id = "next.ram"; mc->default_cpu_type = M68K_CPU_TYPE_NAME("m68040"); + mc->no_cdrom = true; } static const TypeInfo next_typeinfo = { @@ -1080,6 +1372,8 @@ static void next_register_type(void) { type_register_static(&next_typeinfo); type_register_static(&next_pc_info); + type_register_static(&next_scsi_info); + type_register_static(&next_rtc_info); } type_init(next_register_type) diff --git a/hw/m68k/next-kbd.c b/hw/m68k/next-kbd.c index dacc26413f..68b17786b2 100644 --- a/hw/m68k/next-kbd.c +++ b/hw/m68k/next-kbd.c @@ -162,7 +162,7 @@ static const MemoryRegionOps kbd_ops = { .write = kbd_writefn, .valid.min_access_size = 1, .valid.max_access_size = 4, - .endianness = DEVICE_NATIVE_ENDIAN, + .endianness = DEVICE_BIG_ENDIAN, }; static const int qcode_to_nextkbd_keycode[] = { |