diff options
Diffstat (limited to 'hw/arm/omap1.c')
| -rw-r--r-- | hw/arm/omap1.c | 42 |
1 files changed, 21 insertions, 21 deletions
diff --git a/hw/arm/omap1.c b/hw/arm/omap1.c index b3e7625130..1388200191 100644 --- a/hw/arm/omap1.c +++ b/hw/arm/omap1.c @@ -999,7 +999,7 @@ static uint64_t omap_id_read(void *opaque, hwaddr addr, case omap1510: return 0x03310115; default: - hw_error("%s: bad mpu model\n", __FUNCTION__); + hw_error("%s: bad mpu model\n", __func__); } break; @@ -1010,7 +1010,7 @@ static uint64_t omap_id_read(void *opaque, hwaddr addr, case omap1510: return 0xfb47002f; default: - hw_error("%s: bad mpu model\n", __FUNCTION__); + hw_error("%s: bad mpu model\n", __func__); } break; } @@ -1716,7 +1716,7 @@ static void omap_clkm_write(void *opaque, hwaddr addr, case 0x18: /* ARM_SYSST */ if ((s->clkm.clocking_scheme ^ (value >> 11)) & 7) { s->clkm.clocking_scheme = (value >> 11) & 7; - printf("%s: clocking scheme set to %s\n", __FUNCTION__, + printf("%s: clocking scheme set to %s\n", __func__, clkschemename[s->clkm.clocking_scheme]); } s->clkm.cold_start &= value & 0x3f; @@ -2129,14 +2129,14 @@ qemu_irq *omap_mpuio_in_get(struct omap_mpuio_s *s) void omap_mpuio_out_set(struct omap_mpuio_s *s, int line, qemu_irq handler) { if (line >= 16 || line < 0) - hw_error("%s: No GPIO line %i\n", __FUNCTION__, line); + hw_error("%s: No GPIO line %i\n", __func__, line); s->handler[line] = handler; } void omap_mpuio_key(struct omap_mpuio_s *s, int row, int col, int down) { if (row >= 5 || row < 0) - hw_error("%s: No key %i-%i\n", __FUNCTION__, col, row); + hw_error("%s: No key %i-%i\n", __func__, col, row); if (down) s->buttons[row] |= 1 << col; @@ -2313,7 +2313,7 @@ void omap_uwire_attach(struct omap_uwire_s *s, uWireSlave *slave, int chipselect) { if (chipselect < 0 || chipselect > 3) { - fprintf(stderr, "%s: Bad chipselect %i\n", __FUNCTION__, chipselect); + fprintf(stderr, "%s: Bad chipselect %i\n", __func__, chipselect); exit(-1); } @@ -2335,7 +2335,7 @@ static void omap_pwl_update(struct omap_pwl_s *s) if (output != s->output) { s->output = output; - printf("%s: Backlight now at %i/256\n", __FUNCTION__, output); + printf("%s: Backlight now at %i/256\n", __func__, output); } } @@ -2473,7 +2473,7 @@ static void omap_pwt_write(void *opaque, hwaddr addr, case 0x04: /* VRC */ if ((value ^ s->vrc) & 1) { if (value & 1) - printf("%s: %iHz buzz on\n", __FUNCTION__, (int) + printf("%s: %iHz buzz on\n", __func__, (int) /* 1.5 MHz from a 12-MHz or 13-MHz PWT_CLK */ ((omap_clk_getrate(s->clk) >> 3) / /* Pre-multiplexer divider */ @@ -2490,7 +2490,7 @@ static void omap_pwt_write(void *opaque, hwaddr addr, ((value & (1 << 5)) ? 80 : 127) / (107 * 55 * 63 * 127))); else - printf("%s: silence!\n", __FUNCTION__); + printf("%s: silence!\n", __func__); } s->vrc = value & 0x7f; break; @@ -2562,7 +2562,7 @@ static void omap_rtc_alarm_update(struct omap_rtc_s *s) { s->alarm_ti = mktimegm(&s->alarm_tm); if (s->alarm_ti == -1) - printf("%s: conversion failed\n", __FUNCTION__); + printf("%s: conversion failed\n", __func__); } static uint64_t omap_rtc_read(void *opaque, hwaddr addr, @@ -3028,7 +3028,7 @@ static void omap_mcbsp_source_tick(void *opaque) if (!s->rx_rate) return; if (s->rx_req) - printf("%s: Rx FIFO overrun\n", __FUNCTION__); + printf("%s: Rx FIFO overrun\n", __func__); s->rx_req = s->rx_rate << bps[(s->rcr[0] >> 5) & 7]; @@ -3074,7 +3074,7 @@ static void omap_mcbsp_sink_tick(void *opaque) if (!s->tx_rate) return; if (s->tx_req) - printf("%s: Tx FIFO underrun\n", __FUNCTION__); + printf("%s: Tx FIFO underrun\n", __func__); s->tx_req = s->tx_rate << bps[(s->xcr[0] >> 5) & 7]; @@ -3176,7 +3176,7 @@ static uint64_t omap_mcbsp_read(void *opaque, hwaddr addr, /* Fall through. */ case 0x02: /* DRR1 */ if (s->rx_req < 2) { - printf("%s: Rx FIFO underrun\n", __FUNCTION__); + printf("%s: Rx FIFO underrun\n", __func__); omap_mcbsp_rx_done(s); } else { s->tx_req -= 2; @@ -3282,7 +3282,7 @@ static void omap_mcbsp_writeh(void *opaque, hwaddr addr, if (s->tx_req < 2) omap_mcbsp_tx_done(s); } else - printf("%s: Tx FIFO overrun\n", __FUNCTION__); + printf("%s: Tx FIFO overrun\n", __func__); return; case 0x08: /* SPCR2 */ @@ -3297,7 +3297,7 @@ static void omap_mcbsp_writeh(void *opaque, hwaddr addr, s->spcr[0] &= 0x0006; s->spcr[0] |= 0xf8f9 & value; if (value & (1 << 15)) /* DLB */ - printf("%s: Digital Loopback mode enable attempt\n", __FUNCTION__); + printf("%s: Digital Loopback mode enable attempt\n", __func__); if (~value & 1) { /* RRST */ s->spcr[0] &= ~6; s->rx_req = 0; @@ -3330,13 +3330,13 @@ static void omap_mcbsp_writeh(void *opaque, hwaddr addr, s->mcr[1] = value & 0x03e3; if (value & 3) /* XMCM */ printf("%s: Tx channel selection mode enable attempt\n", - __FUNCTION__); + __func__); return; case 0x1a: /* MCR1 */ s->mcr[0] = value & 0x03e1; if (value & 1) /* RMCM */ printf("%s: Rx channel selection mode enable attempt\n", - __FUNCTION__); + __func__); return; case 0x1c: /* RCERA */ s->rcer[0] = value & 0xffff; @@ -3418,7 +3418,7 @@ static void omap_mcbsp_writew(void *opaque, hwaddr addr, if (s->tx_req < 4) omap_mcbsp_tx_done(s); } else - printf("%s: Tx FIFO overrun\n", __FUNCTION__); + printf("%s: Tx FIFO overrun\n", __func__); return; } @@ -3536,7 +3536,7 @@ static void omap_lpg_tick(void *opaque) timer_mod(s->tm, qemu_clock_get_ms(QEMU_CLOCK_VIRTUAL) + s->on); s->cycle = !s->cycle; - printf("%s: LED is %s\n", __FUNCTION__, s->cycle ? "on" : "off"); + printf("%s: LED is %s\n", __func__, s->cycle ? "on" : "off"); } static void omap_lpg_update(struct omap_lpg_s *s) @@ -3557,9 +3557,9 @@ static void omap_lpg_update(struct omap_lpg_s *s) timer_del(s->tm); if (on == period && s->on < s->period) - printf("%s: LED is on\n", __FUNCTION__); + printf("%s: LED is on\n", __func__); else if (on == 0 && s->on) - printf("%s: LED is off\n", __FUNCTION__); + printf("%s: LED is off\n", __func__); else if (on && (on != s->on || period != s->period)) { s->cycle = 0; s->on = on; |