diff options
Diffstat (limited to 'hw/arm')
| -rw-r--r-- | hw/arm/boot.c | 72 | ||||
| -rw-r--r-- | hw/arm/sysbus-fdt.c | 61 | ||||
| -rw-r--r-- | hw/arm/virt.c | 64 |
3 files changed, 53 insertions, 144 deletions
diff --git a/hw/arm/boot.c b/hw/arm/boot.c index 1e2be20731..9496f331a8 100644 --- a/hw/arm/boot.c +++ b/hw/arm/boot.c @@ -36,8 +36,8 @@ #define ARM64_TEXT_OFFSET_OFFSET 8 #define ARM64_MAGIC_OFFSET 56 -static AddressSpace *arm_boot_address_space(ARMCPU *cpu, - const struct arm_boot_info *info) +AddressSpace *arm_boot_address_space(ARMCPU *cpu, + const struct arm_boot_info *info) { /* Return the address space to use for bootloader reads and writes. * We prefer the secure address space if the CPU has it and we're @@ -486,29 +486,8 @@ static void fdt_add_psci_node(void *fdt) qemu_fdt_setprop_cell(fdt, "/psci", "migrate", migrate_fn); } -/** - * load_dtb() - load a device tree binary image into memory - * @addr: the address to load the image at - * @binfo: struct describing the boot environment - * @addr_limit: upper limit of the available memory area at @addr - * @as: address space to load image to - * - * Load a device tree supplied by the machine or by the user with the - * '-dtb' command line option, and put it at offset @addr in target - * memory. - * - * If @addr_limit contains a meaningful value (i.e., it is strictly greater - * than @addr), the device tree is only loaded if its size does not exceed - * the limit. - * - * Returns: the size of the device tree image on success, - * 0 if the image size exceeds the limit, - * -1 on errors. - * - * Note: Must not be called unless have_dtb(binfo) is true. - */ -static int load_dtb(hwaddr addr, const struct arm_boot_info *binfo, - hwaddr addr_limit, AddressSpace *as) +int arm_load_dtb(hwaddr addr, const struct arm_boot_info *binfo, + hwaddr addr_limit, AddressSpace *as) { void *fdt = NULL; int size, rc; @@ -935,7 +914,7 @@ static uint64_t load_aarch64_image(const char *filename, hwaddr mem_base, return size; } -static void arm_load_kernel_notify(Notifier *notifier, void *data) +void arm_load_kernel(ARMCPU *cpu, struct arm_boot_info *info) { CPUState *cs; int kernel_size; @@ -945,11 +924,6 @@ static void arm_load_kernel_notify(Notifier *notifier, void *data) int elf_machine; hwaddr entry; static const ARMInsnFixup *primary_loader; - ArmLoadKernelNotifier *n = DO_UPCAST(ArmLoadKernelNotifier, - notifier, notifier); - ARMCPU *cpu = n->cpu; - struct arm_boot_info *info = - container_of(n, struct arm_boot_info, load_kernel_notifier); AddressSpace *as = arm_boot_address_space(cpu, info); /* The board code is not supposed to set secure_board_setup unless @@ -959,6 +933,7 @@ static void arm_load_kernel_notify(Notifier *notifier, void *data) assert(!(info->secure_board_setup && kvm_enabled())); info->dtb_filename = qemu_opt_get(qemu_get_machine_opts(), "dtb"); + info->dtb_limit = 0; /* Load the kernel. */ if (!info->kernel_filename || info->firmware_loaded) { @@ -968,9 +943,7 @@ static void arm_load_kernel_notify(Notifier *notifier, void *data) * the kernel is supposed to be loaded by the bootloader), copy the * DTB to the base of RAM for the bootloader to pick up. */ - if (load_dtb(info->loader_start, info, 0, as) < 0) { - exit(1); - } + info->dtb_start = info->loader_start; } if (info->kernel_filename) { @@ -1050,15 +1023,14 @@ static void arm_load_kernel_notify(Notifier *notifier, void *data) */ if (elf_low_addr > info->loader_start || elf_high_addr < info->loader_start) { - /* Pass elf_low_addr as address limit to load_dtb if it may be + /* Set elf_low_addr as address limit for arm_load_dtb if it may be * pointing into RAM, otherwise pass '0' (no limit) */ if (elf_low_addr < info->loader_start) { elf_low_addr = 0; } - if (load_dtb(info->loader_start, info, elf_low_addr, as) < 0) { - exit(1); - } + info->dtb_start = info->loader_start; + info->dtb_limit = elf_low_addr; } } entry = elf_entry; @@ -1116,7 +1088,6 @@ static void arm_load_kernel_notify(Notifier *notifier, void *data) */ if (have_dtb(info)) { hwaddr align; - hwaddr dtb_start; if (elf_machine == EM_AARCH64) { /* @@ -1136,11 +1107,9 @@ static void arm_load_kernel_notify(Notifier *notifier, void *data) } /* Place the DTB after the initrd in memory with alignment. */ - dtb_start = QEMU_ALIGN_UP(info->initrd_start + initrd_size, align); - if (load_dtb(dtb_start, info, 0, as) < 0) { - exit(1); - } - fixupcontext[FIXUP_ARGPTR] = dtb_start; + info->dtb_start = QEMU_ALIGN_UP(info->initrd_start + initrd_size, + align); + fixupcontext[FIXUP_ARGPTR] = info->dtb_start; } else { fixupcontext[FIXUP_ARGPTR] = info->loader_start + KERNEL_ARGS_ADDR; if (info->ram_size >= (1ULL << 32)) { @@ -1173,15 +1142,6 @@ static void arm_load_kernel_notify(Notifier *notifier, void *data) for (cs = first_cpu; cs; cs = CPU_NEXT(cs)) { ARM_CPU(cs)->env.boot_info = info; } -} - -void arm_load_kernel(ARMCPU *cpu, struct arm_boot_info *info) -{ - CPUState *cs; - - info->load_kernel_notifier.cpu = cpu; - info->load_kernel_notifier.notifier.notify = arm_load_kernel_notify; - qemu_add_machine_init_done_notifier(&info->load_kernel_notifier.notifier); /* CPU objects (unlike devices) are not automatically reset on system * reset, so we must always register a handler to do so. If we're @@ -1191,6 +1151,12 @@ void arm_load_kernel(ARMCPU *cpu, struct arm_boot_info *info) for (cs = first_cpu; cs; cs = CPU_NEXT(cs)) { qemu_register_reset(do_cpu_reset, ARM_CPU(cs)); } + + if (!info->skip_dtb_autoload && have_dtb(info)) { + if (arm_load_dtb(info->dtb_start, info, info->dtb_limit, as) < 0) { + exit(1); + } + } } static const TypeInfo arm_linux_boot_if_info = { diff --git a/hw/arm/sysbus-fdt.c b/hw/arm/sysbus-fdt.c index 80ff70e1ed..e4c492ea44 100644 --- a/hw/arm/sysbus-fdt.c +++ b/hw/arm/sysbus-fdt.c @@ -49,15 +49,6 @@ typedef struct PlatformBusFDTData { PlatformBusDevice *pbus; } PlatformBusFDTData; -/* - * struct used when calling the machine init done notifier - * that constructs the fdt nodes of platform bus devices - */ -typedef struct PlatformBusFDTNotifierParams { - Notifier notifier; - ARMPlatformBusFDTParams *fdt_params; -} PlatformBusFDTNotifierParams; - /* struct that associates a device type name and a node creation function */ typedef struct NodeCreationPair { const char *typename; @@ -453,42 +444,17 @@ static void add_fdt_node(SysBusDevice *sbdev, void *opaque) exit(1); } -/** - * add_all_platform_bus_fdt_nodes - create all the platform bus nodes - * - * builds the parent platform bus node and all the nodes of dynamic - * sysbus devices attached to it. - */ -static void add_all_platform_bus_fdt_nodes(ARMPlatformBusFDTParams *fdt_params) +void platform_bus_add_all_fdt_nodes(void *fdt, const char *intc, hwaddr addr, + hwaddr bus_size, int irq_start) { const char platcomp[] = "qemu,platform\0simple-bus"; PlatformBusDevice *pbus; DeviceState *dev; gchar *node; - uint64_t addr, size; - int irq_start, dtb_size; - struct arm_boot_info *info = fdt_params->binfo; - const ARMPlatformBusSystemParams *params = fdt_params->system_params; - const char *intc = fdt_params->intc; - void *fdt = info->get_dtb(info, &dtb_size); - - /* - * If the user provided a dtb, we assume the dynamic sysbus nodes - * already are integrated there. This corresponds to a use case where - * the dynamic sysbus nodes are complex and their generation is not yet - * supported. In that case the user can take charge of the guest dt - * while qemu takes charge of the qom stuff. - */ - if (info->dtb_filename) { - return; - } assert(fdt); - node = g_strdup_printf("/platform@%"PRIx64, params->platform_bus_base); - addr = params->platform_bus_base; - size = params->platform_bus_size; - irq_start = params->platform_bus_first_irq; + node = g_strdup_printf("/platform@%"PRIx64, addr); /* Create a /platform node that we can put all devices into */ qemu_fdt_add_subnode(fdt, node); @@ -499,7 +465,7 @@ static void add_all_platform_bus_fdt_nodes(ARMPlatformBusFDTParams *fdt_params) */ qemu_fdt_setprop_cells(fdt, node, "#size-cells", 1); qemu_fdt_setprop_cells(fdt, node, "#address-cells", 1); - qemu_fdt_setprop_cells(fdt, node, "ranges", 0, addr >> 32, addr, size); + qemu_fdt_setprop_cells(fdt, node, "ranges", 0, addr >> 32, addr, bus_size); qemu_fdt_setprop_phandle(fdt, node, "interrupt-parent", intc); @@ -518,22 +484,3 @@ static void add_all_platform_bus_fdt_nodes(ARMPlatformBusFDTParams *fdt_params) g_free(node); } - -static void platform_bus_fdt_notify(Notifier *notifier, void *data) -{ - PlatformBusFDTNotifierParams *p = DO_UPCAST(PlatformBusFDTNotifierParams, - notifier, notifier); - - add_all_platform_bus_fdt_nodes(p->fdt_params); - g_free(p->fdt_params); - g_free(p); -} - -void arm_register_platform_bus_fdt_creator(ARMPlatformBusFDTParams *fdt_params) -{ - PlatformBusFDTNotifierParams *p = g_new(PlatformBusFDTNotifierParams, 1); - - p->fdt_params = fdt_params; - p->notifier.notify = platform_bus_fdt_notify; - qemu_add_machine_init_done_notifier(&p->notifier); -} diff --git a/hw/arm/virt.c b/hw/arm/virt.c index 1f54223f19..6710be226f 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -94,8 +94,6 @@ #define PLATFORM_BUS_NUM_IRQS 64 -static ARMPlatformBusSystemParams platform_bus_params; - /* RAM limit in GB. Since VIRT_MEM starts at the 1GB mark, this means * RAM can go up to the 256GB mark, leaving 256GB of the physical * address space unallocated and free for future use between 256G and 512G. @@ -1126,40 +1124,23 @@ static void create_platform_bus(VirtMachineState *vms, qemu_irq *pic) DeviceState *dev; SysBusDevice *s; int i; - ARMPlatformBusFDTParams *fdt_params = g_new(ARMPlatformBusFDTParams, 1); MemoryRegion *sysmem = get_system_memory(); - platform_bus_params.platform_bus_base = vms->memmap[VIRT_PLATFORM_BUS].base; - platform_bus_params.platform_bus_size = vms->memmap[VIRT_PLATFORM_BUS].size; - platform_bus_params.platform_bus_first_irq = vms->irqmap[VIRT_PLATFORM_BUS]; - platform_bus_params.platform_bus_num_irqs = PLATFORM_BUS_NUM_IRQS; - - fdt_params->system_params = &platform_bus_params; - fdt_params->binfo = &vms->bootinfo; - fdt_params->intc = "/intc"; - /* - * register a machine init done notifier that creates the device tree - * nodes of the platform bus and its children dynamic sysbus devices - */ - arm_register_platform_bus_fdt_creator(fdt_params); - dev = qdev_create(NULL, TYPE_PLATFORM_BUS_DEVICE); dev->id = TYPE_PLATFORM_BUS_DEVICE; - qdev_prop_set_uint32(dev, "num_irqs", - platform_bus_params.platform_bus_num_irqs); - qdev_prop_set_uint32(dev, "mmio_size", - platform_bus_params.platform_bus_size); + qdev_prop_set_uint32(dev, "num_irqs", PLATFORM_BUS_NUM_IRQS); + qdev_prop_set_uint32(dev, "mmio_size", vms->memmap[VIRT_PLATFORM_BUS].size); qdev_init_nofail(dev); vms->platform_bus_dev = dev; - s = SYS_BUS_DEVICE(dev); - for (i = 0; i < platform_bus_params.platform_bus_num_irqs; i++) { - int irqn = platform_bus_params.platform_bus_first_irq + i; + s = SYS_BUS_DEVICE(dev); + for (i = 0; i < PLATFORM_BUS_NUM_IRQS; i++) { + int irqn = vms->irqmap[VIRT_PLATFORM_BUS] + i; sysbus_connect_irq(s, i, pic[irqn]); } memory_region_add_subregion(sysmem, - platform_bus_params.platform_bus_base, + vms->memmap[VIRT_PLATFORM_BUS].base, sysbus_mmio_get_region(s, 0)); } @@ -1230,6 +1211,26 @@ void virt_machine_done(Notifier *notifier, void *data) { VirtMachineState *vms = container_of(notifier, VirtMachineState, machine_done); + ARMCPU *cpu = ARM_CPU(first_cpu); + struct arm_boot_info *info = &vms->bootinfo; + AddressSpace *as = arm_boot_address_space(cpu, info); + + /* + * If the user provided a dtb, we assume the dynamic sysbus nodes + * already are integrated there. This corresponds to a use case where + * the dynamic sysbus nodes are complex and their generation is not yet + * supported. In that case the user can take charge of the guest dt + * while qemu takes charge of the qom stuff. + */ + if (info->dtb_filename == NULL) { + platform_bus_add_all_fdt_nodes(vms->fdt, "/intc", + vms->memmap[VIRT_PLATFORM_BUS].base, + vms->memmap[VIRT_PLATFORM_BUS].size, + vms->irqmap[VIRT_PLATFORM_BUS]); + } + if (arm_load_dtb(info->dtb_start, info, info->dtb_limit, as) < 0) { + exit(1); + } virt_acpi_setup(vms); virt_build_smbios(vms); @@ -1457,8 +1458,7 @@ static void machvirt_init(MachineState *machine) vms->fw_cfg = create_fw_cfg(vms, &address_space_memory); rom_set_fw(vms->fw_cfg); - vms->machine_done.notify = virt_machine_done; - qemu_add_machine_init_done_notifier(&vms->machine_done); + create_platform_bus(vms, pic); vms->bootinfo.ram_size = machine->ram_size; vms->bootinfo.kernel_filename = machine->kernel_filename; @@ -1468,16 +1468,12 @@ static void machvirt_init(MachineState *machine) vms->bootinfo.board_id = -1; vms->bootinfo.loader_start = vms->memmap[VIRT_MEM].base; vms->bootinfo.get_dtb = machvirt_dtb; + vms->bootinfo.skip_dtb_autoload = true; vms->bootinfo.firmware_loaded = firmware_loaded; arm_load_kernel(ARM_CPU(first_cpu), &vms->bootinfo); - /* - * arm_load_kernel machine init done notifier registration must - * happen before the platform_bus_create call. In this latter, - * another notifier is registered which adds platform bus nodes. - * Notifiers are executed in registration reverse order. - */ - create_platform_bus(vms, pic); + vms->machine_done.notify = virt_machine_done; + qemu_add_machine_init_done_notifier(&vms->machine_done); } static bool virt_get_secure(Object *obj, Error **errp) |