1 files changed, 152 insertions, 0 deletions
diff --git a/hw/misc/aspeed_peci.c b/hw/misc/aspeed_peci.c
new file mode 100644
index 0000000000..93cc672e96
--- /dev/null
+++ b/hw/misc/aspeed_peci.c
@@ -0,0 +1,152 @@
+/*
+ * Aspeed PECI Controller
+ *
+ * Copyright (c) Meta Platforms, Inc. and affiliates. (http://www.meta.com)
+ *
+ * This code is licensed under the GPL version 2 or later. See the COPYING
+ * file in the top-level directory.
+ */
+
+#include "qemu/osdep.h"
+#include "qemu/log.h"
+#include "hw/irq.h"
+#include "hw/misc/aspeed_peci.h"
+#include "hw/registerfields.h"
+#include "trace.h"
+
+#define ASPEED_PECI_CC_RSP_SUCCESS (0x40U)
+
+/* Command Register */
+REG32(PECI_CMD, 0x08)
+    FIELD(PECI_CMD, FIRE, 0, 1)
+
+/* Interrupt Control Register */
+REG32(PECI_INT_CTRL, 0x18)
+
+/* Interrupt Status Register */
+REG32(PECI_INT_STS, 0x1C)
+    FIELD(PECI_INT_STS, CMD_DONE, 0, 1)
+
+/* Rx/Tx Data Buffer Registers */
+REG32(PECI_WR_DATA0, 0x20)
+REG32(PECI_RD_DATA0, 0x30)
+
+static void aspeed_peci_raise_interrupt(AspeedPECIState *s, uint32_t status)
+{
+    trace_aspeed_peci_raise_interrupt(s->regs[R_PECI_INT_CTRL], status);
+
+    s->regs[R_PECI_INT_STS] = s->regs[R_PECI_INT_CTRL] & status;
+    if (!s->regs[R_PECI_INT_STS]) {
+        return;
+    }
+    qemu_irq_raise(s->irq);
+}
+
+static uint64_t aspeed_peci_read(void *opaque, hwaddr offset, unsigned size)
+{
+    AspeedPECIState *s = ASPEED_PECI(opaque);
+    uint64_t data;
+
+    if (offset >= ASPEED_PECI_NR_REGS << 2) {
+        qemu_log_mask(LOG_GUEST_ERROR,
+                      "%s: Out-of-bounds read at offset 0x%" HWADDR_PRIx "\n",
+                      __func__, offset);
+        return 0;
+    }
+    data = s->regs[offset >> 2];
+
+    trace_aspeed_peci_read(offset, data);
+    return data;
+}
+
+static void aspeed_peci_write(void *opaque, hwaddr offset, uint64_t data,
+                              unsigned size)
+{
+    AspeedPECIState *s = ASPEED_PECI(opaque);
+
+    trace_aspeed_peci_write(offset, data);
+
+    if (offset >= ASPEED_PECI_NR_REGS << 2) {
+        qemu_log_mask(LOG_GUEST_ERROR,
+                      "%s: Out-of-bounds write at offset 0x%" HWADDR_PRIx "\n",
+                      __func__, offset);
+        return;
+    }
+
+    switch (offset) {
+    case A_PECI_INT_STS:
+        s->regs[R_PECI_INT_STS] &= ~data;
+        if (!s->regs[R_PECI_INT_STS]) {
+            qemu_irq_lower(s->irq);
+        }
+        break;
+    case A_PECI_CMD:
+        /*
+         * Only the FIRE bit is writable. Once the command is complete, it
+         * should be cleared. Since we complete the command immediately, the
+         * value is not stored in the register array.
+         */
+        if (!FIELD_EX32(data, PECI_CMD, FIRE)) {
+            break;
+        }
+        if (s->regs[R_PECI_INT_STS]) {
+            qemu_log_mask(LOG_GUEST_ERROR, "%s: Interrupt status must be "
+                          "cleared before firing another command: 0x%08x\n",
+                          __func__, s->regs[R_PECI_INT_STS]);
+            break;
+        }
+        s->regs[R_PECI_RD_DATA0] = ASPEED_PECI_CC_RSP_SUCCESS;
+        s->regs[R_PECI_WR_DATA0] = ASPEED_PECI_CC_RSP_SUCCESS;
+        aspeed_peci_raise_interrupt(s,
+                                    FIELD_DP32(0, PECI_INT_STS, CMD_DONE, 1));
+        break;
+    default:
+        s->regs[offset / sizeof(s->regs[0])] = data;
+        break;
+    }
+}
+
+static const MemoryRegionOps aspeed_peci_ops = {
+    .read = aspeed_peci_read,
+    .write = aspeed_peci_write,
+    .endianness = DEVICE_LITTLE_ENDIAN,
+};
+
+static void aspeed_peci_realize(DeviceState *dev, Error **errp)
+{
+    AspeedPECIState *s = ASPEED_PECI(dev);
+    SysBusDevice *sbd = SYS_BUS_DEVICE(dev);
+
+    memory_region_init_io(&s->mmio, OBJECT(s), &aspeed_peci_ops, s,
+                          TYPE_ASPEED_PECI, 0x1000);
+    sysbus_init_mmio(sbd, &s->mmio);
+    sysbus_init_irq(sbd, &s->irq);
+}
+
+static void aspeed_peci_reset(DeviceState *dev)
+{
+    AspeedPECIState *s = ASPEED_PECI(dev);
+
+    memset(s->regs, 0, sizeof(s->regs));
+}
+
+static void aspeed_peci_class_init(ObjectClass *klass, void *data)
+{
+    DeviceClass *dc = DEVICE_CLASS(klass);
+
+    dc->realize = aspeed_peci_realize;
+    dc->reset = aspeed_peci_reset;
+    dc->desc = "Aspeed PECI Controller";
+}
+
+static const TypeInfo aspeed_peci_types[] = {
+    {
+        .name = TYPE_ASPEED_PECI,
+        .parent = TYPE_SYS_BUS_DEVICE,
+        .instance_size = sizeof(AspeedPECIState),
+        .class_init = aspeed_peci_class_init,
+        .abstract = false,
+    },
+};
+
+DEFINE_TYPES(aspeed_peci_types);