diff options
Diffstat (limited to 'hw')
| -rw-r--r-- | hw/arm/Kconfig | 3 | ||||
| -rw-r--r-- | hw/arm/stm32l4x5_soc.c | 71 | ||||
| -rw-r--r-- | hw/gpio/Kconfig | 3 | ||||
| -rw-r--r-- | hw/gpio/meson.build | 1 | ||||
| -rw-r--r-- | hw/gpio/stm32l4x5_gpio.c | 477 | ||||
| -rw-r--r-- | hw/gpio/trace-events | 6 | ||||
| -rw-r--r-- | hw/misc/stm32l4x5_syscfg.c | 1 | ||||
| -rw-r--r-- | hw/rtc/sun4v-rtc.c | 2 |
8 files changed, 547 insertions, 17 deletions
diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index d58d820788..893a7bff66 100644 --- a/hw/arm/Kconfig +++ b/hw/arm/Kconfig @@ -473,9 +473,10 @@ config STM32L4X5_SOC bool select ARM_V7M select OR_IRQ - select STM32L4X5_SYSCFG select STM32L4X5_EXTI + select STM32L4X5_SYSCFG select STM32L4X5_RCC + select STM32L4X5_GPIO config XLNX_ZYNQMP_ARM bool diff --git a/hw/arm/stm32l4x5_soc.c b/hw/arm/stm32l4x5_soc.c index bf9926057b..40e294f838 100644 --- a/hw/arm/stm32l4x5_soc.c +++ b/hw/arm/stm32l4x5_soc.c @@ -28,6 +28,7 @@ #include "sysemu/sysemu.h" #include "hw/or-irq.h" #include "hw/arm/stm32l4x5_soc.h" +#include "hw/gpio/stm32l4x5_gpio.h" #include "hw/qdev-clock.h" #include "hw/misc/unimp.h" @@ -99,6 +100,22 @@ static const int exti_or_gate1_lines_in[EXTI_OR_GATE1_NUM_LINES_IN] = { 16, 35, 36, 37, 38, }; +static const struct { + uint32_t addr; + uint32_t moder_reset; + uint32_t ospeedr_reset; + uint32_t pupdr_reset; +} stm32l4x5_gpio_cfg[NUM_GPIOS] = { + { 0x48000000, 0xABFFFFFF, 0x0C000000, 0x64000000 }, + { 0x48000400, 0xFFFFFEBF, 0x00000000, 0x00000100 }, + { 0x48000800, 0xFFFFFFFF, 0x00000000, 0x00000000 }, + { 0x48000C00, 0xFFFFFFFF, 0x00000000, 0x00000000 }, + { 0x48001000, 0xFFFFFFFF, 0x00000000, 0x00000000 }, + { 0x48001400, 0xFFFFFFFF, 0x00000000, 0x00000000 }, + { 0x48001800, 0xFFFFFFFF, 0x00000000, 0x00000000 }, + { 0x48001C00, 0x0000000F, 0x00000000, 0x00000000 }, +}; + static void stm32l4x5_soc_initfn(Object *obj) { Stm32l4x5SocState *s = STM32L4X5_SOC(obj); @@ -110,6 +127,11 @@ static void stm32l4x5_soc_initfn(Object *obj) } object_initialize_child(obj, "syscfg", &s->syscfg, TYPE_STM32L4X5_SYSCFG); object_initialize_child(obj, "rcc", &s->rcc, TYPE_STM32L4X5_RCC); + + for (unsigned i = 0; i < NUM_GPIOS; i++) { + g_autofree char *name = g_strdup_printf("gpio%c", 'a' + i); + object_initialize_child(obj, name, &s->gpio[i], TYPE_STM32L4X5_GPIO); + } } static void stm32l4x5_soc_realize(DeviceState *dev_soc, Error **errp) @@ -118,8 +140,9 @@ static void stm32l4x5_soc_realize(DeviceState *dev_soc, Error **errp) Stm32l4x5SocState *s = STM32L4X5_SOC(dev_soc); const Stm32l4x5SocClass *sc = STM32L4X5_SOC_GET_CLASS(dev_soc); MemoryRegion *system_memory = get_system_memory(); - DeviceState *armv7m; + DeviceState *armv7m, *dev; SysBusDevice *busdev; + uint32_t pin_index; if (!memory_region_init_rom(&s->flash, OBJECT(dev_soc), "flash", sc->flash_size, errp)) { @@ -160,17 +183,43 @@ static void stm32l4x5_soc_realize(DeviceState *dev_soc, Error **errp) return; } + /* GPIOs */ + for (unsigned i = 0; i < NUM_GPIOS; i++) { + g_autofree char *name = g_strdup_printf("%c", 'A' + i); + dev = DEVICE(&s->gpio[i]); + qdev_prop_set_string(dev, "name", name); + qdev_prop_set_uint32(dev, "mode-reset", + stm32l4x5_gpio_cfg[i].moder_reset); + qdev_prop_set_uint32(dev, "ospeed-reset", + stm32l4x5_gpio_cfg[i].ospeedr_reset); + qdev_prop_set_uint32(dev, "pupd-reset", + stm32l4x5_gpio_cfg[i].pupdr_reset); + busdev = SYS_BUS_DEVICE(&s->gpio[i]); + g_free(name); + name = g_strdup_printf("gpio%c-out", 'a' + i); + qdev_connect_clock_in(DEVICE(&s->gpio[i]), "clk", + qdev_get_clock_out(DEVICE(&(s->rcc)), name)); + if (!sysbus_realize(busdev, errp)) { + return; + } + sysbus_mmio_map(busdev, 0, stm32l4x5_gpio_cfg[i].addr); + } + /* System configuration controller */ busdev = SYS_BUS_DEVICE(&s->syscfg); if (!sysbus_realize(busdev, errp)) { return; } sysbus_mmio_map(busdev, 0, SYSCFG_ADDR); - /* - * TODO: when the GPIO device is implemented, connect it - * to SYCFG using `qdev_connect_gpio_out`, NUM_GPIOS and - * GPIO_NUM_PINS. - */ + + for (unsigned i = 0; i < NUM_GPIOS; i++) { + for (unsigned j = 0; j < GPIO_NUM_PINS; j++) { + pin_index = GPIO_NUM_PINS * i + j; + qdev_connect_gpio_out(DEVICE(&s->gpio[i]), j, + qdev_get_gpio_in(DEVICE(&s->syscfg), + pin_index)); + } + } /* EXTI device */ busdev = SYS_BUS_DEVICE(&s->exti); @@ -217,7 +266,7 @@ static void stm32l4x5_soc_realize(DeviceState *dev_soc, Error **errp) } } - for (unsigned i = 0; i < 16; i++) { + for (unsigned i = 0; i < GPIO_NUM_PINS; i++) { qdev_connect_gpio_out(DEVICE(&s->syscfg), i, qdev_get_gpio_in(DEVICE(&s->exti), i)); } @@ -302,14 +351,6 @@ static void stm32l4x5_soc_realize(DeviceState *dev_soc, Error **errp) /* RESERVED: 0x40024400, 0x7FDBC00 */ /* AHB2 BUS */ - create_unimplemented_device("GPIOA", 0x48000000, 0x400); - create_unimplemented_device("GPIOB", 0x48000400, 0x400); - create_unimplemented_device("GPIOC", 0x48000800, 0x400); - create_unimplemented_device("GPIOD", 0x48000C00, 0x400); - create_unimplemented_device("GPIOE", 0x48001000, 0x400); - create_unimplemented_device("GPIOF", 0x48001400, 0x400); - create_unimplemented_device("GPIOG", 0x48001800, 0x400); - create_unimplemented_device("GPIOH", 0x48001C00, 0x400); /* RESERVED: 0x48002000, 0x7FDBC00 */ create_unimplemented_device("OTG_FS", 0x50000000, 0x40000); create_unimplemented_device("ADC", 0x50040000, 0x400); diff --git a/hw/gpio/Kconfig b/hw/gpio/Kconfig index d2cf3accc8..712940b8e0 100644 --- a/hw/gpio/Kconfig +++ b/hw/gpio/Kconfig @@ -16,3 +16,6 @@ config GPIO_PWR config SIFIVE_GPIO bool + +config STM32L4X5_GPIO + bool diff --git a/hw/gpio/meson.build b/hw/gpio/meson.build index 8a8d03d885..3454b503ae 100644 --- a/hw/gpio/meson.build +++ b/hw/gpio/meson.build @@ -13,5 +13,6 @@ system_ss.add(when: 'CONFIG_RASPI', if_true: files( 'bcm2835_gpio.c', 'bcm2838_gpio.c' )) +system_ss.add(when: 'CONFIG_STM32L4X5_SOC', if_true: files('stm32l4x5_gpio.c')) system_ss.add(when: 'CONFIG_ASPEED_SOC', if_true: files('aspeed_gpio.c')) system_ss.add(when: 'CONFIG_SIFIVE_GPIO', if_true: files('sifive_gpio.c')) diff --git a/hw/gpio/stm32l4x5_gpio.c b/hw/gpio/stm32l4x5_gpio.c new file mode 100644 index 0000000000..63b8763e9d --- /dev/null +++ b/hw/gpio/stm32l4x5_gpio.c @@ -0,0 +1,477 @@ +/* + * STM32L4x5 GPIO (General Purpose Input/Ouput) + * + * Copyright (c) 2024 Arnaud Minier <arnaud.minier@telecom-paris.fr> + * Copyright (c) 2024 Inès Varhol <ines.varhol@telecom-paris.fr> + * + * SPDX-License-Identifier: GPL-2.0-or-later + * + * This work is licensed under the terms of the GNU GPL, version 2 or later. + * See the COPYING file in the top-level directory. + */ + +/* + * The reference used is the STMicroElectronics RM0351 Reference manual + * for STM32L4x5 and STM32L4x6 advanced Arm ® -based 32-bit MCUs. + * https://www.st.com/en/microcontrollers-microprocessors/stm32l4x5/documentation.html + */ + +#include "qemu/osdep.h" +#include "qemu/log.h" +#include "hw/gpio/stm32l4x5_gpio.h" +#include "hw/irq.h" +#include "hw/qdev-clock.h" +#include "hw/qdev-properties.h" +#include "qapi/visitor.h" +#include "qapi/error.h" +#include "migration/vmstate.h" +#include "trace.h" + +#define GPIO_MODER 0x00 +#define GPIO_OTYPER 0x04 +#define GPIO_OSPEEDR 0x08 +#define GPIO_PUPDR 0x0C +#define GPIO_IDR 0x10 +#define GPIO_ODR 0x14 +#define GPIO_BSRR 0x18 +#define GPIO_LCKR 0x1C +#define GPIO_AFRL 0x20 +#define GPIO_AFRH 0x24 +#define GPIO_BRR 0x28 +#define GPIO_ASCR 0x2C + +/* 0b11111111_11111111_00000000_00000000 */ +#define RESERVED_BITS_MASK 0xFFFF0000 + +static void update_gpio_idr(Stm32l4x5GpioState *s); + +static bool is_pull_up(Stm32l4x5GpioState *s, unsigned pin) +{ + return extract32(s->pupdr, 2 * pin, 2) == 1; +} + +static bool is_pull_down(Stm32l4x5GpioState *s, unsigned pin) +{ + return extract32(s->pupdr, 2 * pin, 2) == 2; +} + +static bool is_output(Stm32l4x5GpioState *s, unsigned pin) +{ + return extract32(s->moder, 2 * pin, 2) == 1; +} + +static bool is_open_drain(Stm32l4x5GpioState *s, unsigned pin) +{ + return extract32(s->otyper, pin, 1) == 1; +} + +static bool is_push_pull(Stm32l4x5GpioState *s, unsigned pin) +{ + return extract32(s->otyper, pin, 1) == 0; +} + +static void stm32l4x5_gpio_reset_hold(Object *obj) +{ + Stm32l4x5GpioState *s = STM32L4X5_GPIO(obj); + + s->moder = s->moder_reset; + s->otyper = 0x00000000; + s->ospeedr = s->ospeedr_reset; + s->pupdr = s->pupdr_reset; + s->idr = 0x00000000; + s->odr = 0x00000000; + s->lckr = 0x00000000; + s->afrl = 0x00000000; + s->afrh = 0x00000000; + s->ascr = 0x00000000; + + s->disconnected_pins = 0xFFFF; + s->pins_connected_high = 0x0000; + update_gpio_idr(s); +} + +static void stm32l4x5_gpio_set(void *opaque, int line, int level) +{ + Stm32l4x5GpioState *s = opaque; + /* + * The pin isn't set if line is configured in output mode + * except if level is 0 and the output is open-drain. + * This way there will be no short-circuit prone situations. + */ + if (is_output(s, line) && !(is_open_drain(s, line) && (level == 0))) { + qemu_log_mask(LOG_GUEST_ERROR, "Line %d can't be driven externally\n", + line); + return; + } + + s->disconnected_pins &= ~(1 << line); + if (level) { + s->pins_connected_high |= (1 << line); + } else { + s->pins_connected_high &= ~(1 << line); + } + trace_stm32l4x5_gpio_pins(s->name, s->disconnected_pins, + s->pins_connected_high); + update_gpio_idr(s); +} + + +static void update_gpio_idr(Stm32l4x5GpioState *s) +{ + uint32_t new_idr_mask = 0; + uint32_t new_idr = s->odr; + uint32_t old_idr = s->idr; + int new_pin_state, old_pin_state; + + for (int i = 0; i < GPIO_NUM_PINS; i++) { + if (is_output(s, i)) { + if (is_push_pull(s, i)) { + new_idr_mask |= (1 << i); + } else if (!(s->odr & (1 << i))) { + /* open-drain ODR 0 */ + new_idr_mask |= (1 << i); + /* open-drain ODR 1 */ + } else if (!(s->disconnected_pins & (1 << i)) && + !(s->pins_connected_high & (1 << i))) { + /* open-drain ODR 1 with pin connected low */ + new_idr_mask |= (1 << i); + new_idr &= ~(1 << i); + /* open-drain ODR 1 with unactive pin */ + } else if (is_pull_up(s, i)) { + new_idr_mask |= (1 << i); + } else if (is_pull_down(s, i)) { + new_idr_mask |= (1 << i); + new_idr &= ~(1 << i); + } + /* + * The only case left is for open-drain ODR 1 + * with unactive pin without pull-up or pull-down : + * the value is floating. + */ + /* input or analog mode with connected pin */ + } else if (!(s->disconnected_pins & (1 << i))) { + if (s->pins_connected_high & (1 << i)) { + /* pin high */ + new_idr_mask |= (1 << i); + new_idr |= (1 << i); + } else { + /* pin low */ + new_idr_mask |= (1 << i); + new_idr &= ~(1 << i); + } + /* input or analog mode with disconnected pin */ + } else { + if (is_pull_up(s, i)) { + /* pull-up */ + new_idr_mask |= (1 << i); + new_idr |= (1 << i); + } else if (is_pull_down(s, i)) { + /* pull-down */ + new_idr_mask |= (1 << i); + new_idr &= ~(1 << i); + } + /* + * The only case left is for a disconnected pin + * without pull-up or pull-down : + * the value is floating. + */ + } + } + + s->idr = (old_idr & ~new_idr_mask) | (new_idr & new_idr_mask); + trace_stm32l4x5_gpio_update_idr(s->name, old_idr, s->idr); + + for (int i = 0; i < GPIO_NUM_PINS; i++) { + if (new_idr_mask & (1 << i)) { + new_pin_state = (new_idr & (1 << i)) > 0; + old_pin_state = (old_idr & (1 << i)) > 0; + if (new_pin_state > old_pin_state) { + qemu_irq_raise(s->pin[i]); + } else if (new_pin_state < old_pin_state) { + qemu_irq_lower(s->pin[i]); + } + } + } +} + +/* + * Return mask of pins that are both configured in output + * mode and externally driven (except pins in open-drain + * mode externally set to 0). + */ +static uint32_t get_gpio_pinmask_to_disconnect(Stm32l4x5GpioState *s) +{ + uint32_t pins_to_disconnect = 0; + for (int i = 0; i < GPIO_NUM_PINS; i++) { + /* for each connected pin in output mode */ + if (!(s->disconnected_pins & (1 << i)) && is_output(s, i)) { + /* if either push-pull or high level */ + if (is_push_pull(s, i) || s->pins_connected_high & (1 << i)) { + pins_to_disconnect |= (1 << i); + qemu_log_mask(LOG_GUEST_ERROR, + "Line %d can't be driven externally\n", + i); + } + } + } + return pins_to_disconnect; +} + +/* + * Set field `disconnected_pins` and call `update_gpio_idr()` + */ +static void disconnect_gpio_pins(Stm32l4x5GpioState *s, uint16_t lines) +{ + s->disconnected_pins |= lines; + trace_stm32l4x5_gpio_pins(s->name, s->disconnected_pins, + s->pins_connected_high); + update_gpio_idr(s); +} + +static void disconnected_pins_set(Object *obj, Visitor *v, + const char *name, void *opaque, Error **errp) +{ + Stm32l4x5GpioState *s = STM32L4X5_GPIO(obj); + uint16_t value; + if (!visit_type_uint16(v, name, &value, errp)) { + return; + } + disconnect_gpio_pins(s, value); +} + +static void disconnected_pins_get(Object *obj, Visitor *v, + const char *name, void *opaque, Error **errp) +{ + visit_type_uint16(v, name, (uint16_t *)opaque, errp); +} + +static void clock_freq_get(Object *obj, Visitor *v, + const char *name, void *opaque, Error **errp) +{ + Stm32l4x5GpioState *s = STM32L4X5_GPIO(obj); + uint32_t clock_freq_hz = clock_get_hz(s->clk); + visit_type_uint32(v, name, &clock_freq_hz, errp); +} + +static void stm32l4x5_gpio_write(void *opaque, hwaddr addr, + uint64_t val64, unsigned int size) +{ + Stm32l4x5GpioState *s = opaque; + + uint32_t value = val64; + trace_stm32l4x5_gpio_write(s->name, addr, val64); + + switch (addr) { + case GPIO_MODER: + s->moder = value; + disconnect_gpio_pins(s, get_gpio_pinmask_to_disconnect(s)); + qemu_log_mask(LOG_UNIMP, + "%s: Analog and AF modes aren't supported\n\ + Analog and AF mode behave like input mode\n", + __func__); + return; + case GPIO_OTYPER: + s->otyper = value & ~RESERVED_BITS_MASK; + disconnect_gpio_pins(s, get_gpio_pinmask_to_disconnect(s)); + return; + case GPIO_OSPEEDR: + qemu_log_mask(LOG_UNIMP, + "%s: Changing I/O output speed isn't supported\n\ + I/O speed is already maximal\n", + __func__); + s->ospeedr = value; + return; + case GPIO_PUPDR: + s->pupdr = value; + update_gpio_idr(s); + return; + case GPIO_IDR: + qemu_log_mask(LOG_UNIMP, + "%s: GPIO->IDR is read-only\n", + __func__); + return; + case GPIO_ODR: + s->odr = value & ~RESERVED_BITS_MASK; + update_gpio_idr(s); + return; + case GPIO_BSRR: { + uint32_t bits_to_reset = (value & RESERVED_BITS_MASK) >> GPIO_NUM_PINS; + uint32_t bits_to_set = value & ~RESERVED_BITS_MASK; + /* If both BSx and BRx are set, BSx has priority.*/ + s->odr &= ~bits_to_reset; + s->odr |= bits_to_set; + update_gpio_idr(s); + return; + } + case GPIO_LCKR: + qemu_log_mask(LOG_UNIMP, + "%s: Locking port bits configuration isn't supported\n", + __func__); + s->lckr = value & ~RESERVED_BITS_MASK; + return; + case GPIO_AFRL: + qemu_log_mask(LOG_UNIMP, + "%s: Alternate functions aren't supported\n", + __func__); + s->afrl = value; + return; + case GPIO_AFRH: + qemu_log_mask(LOG_UNIMP, + "%s: Alternate functions aren't supported\n", + __func__); + s->afrh = value; + return; + case GPIO_BRR: { + uint32_t bits_to_reset = value & ~RESERVED_BITS_MASK; + s->odr &= ~bits_to_reset; + update_gpio_idr(s); + return; + } + case GPIO_ASCR: + qemu_log_mask(LOG_UNIMP, + "%s: ADC function isn't supported\n", + __func__); + s->ascr = value & ~RESERVED_BITS_MASK; + return; + default: + qemu_log_mask(LOG_GUEST_ERROR, + "%s: Bad offset 0x%" HWADDR_PRIx "\n", __func__, addr); + } +} + +static uint64_t stm32l4x5_gpio_read(void *opaque, hwaddr addr, + unsigned int size) +{ + Stm32l4x5GpioState *s = opaque; + + trace_stm32l4x5_gpio_read(s->name, addr); + + switch (addr) { + case GPIO_MODER: + return s->moder; + case GPIO_OTYPER: + return s->otyper; + case GPIO_OSPEEDR: + return s->ospeedr; + case GPIO_PUPDR: + return s->pupdr; + case GPIO_IDR: + return s->idr; + case GPIO_ODR: + return s->odr; + case GPIO_BSRR: + return 0; + case GPIO_LCKR: + return s->lckr; + case GPIO_AFRL: + return s->afrl; + case GPIO_AFRH: + return s->afrh; + case GPIO_BRR: + return 0; + case GPIO_ASCR: + return s->ascr; + default: + qemu_log_mask(LOG_GUEST_ERROR, + "%s: Bad offset 0x%" HWADDR_PRIx "\n", __func__, addr); + return 0; + } +} + +static const MemoryRegionOps stm32l4x5_gpio_ops = { + .read = stm32l4x5_gpio_read, + .write = stm32l4x5_gpio_write, + .endianness = DEVICE_NATIVE_ENDIAN, + .impl = { + .min_access_size = 4, + .max_access_size = 4, + .unaligned = false, + }, + .valid = { + .min_access_size = 4, + .max_access_size = 4, + .unaligned = false, + }, +}; + +static void stm32l4x5_gpio_init(Object *obj) +{ + Stm32l4x5GpioState *s = STM32L4X5_GPIO(obj); + + memory_region_init_io(&s->mmio, obj, &stm32l4x5_gpio_ops, s, + TYPE_STM32L4X5_GPIO, 0x400); + + sysbus_init_mmio(SYS_BUS_DEVICE(obj), &s->mmio); + + qdev_init_gpio_out(DEVICE(obj), s->pin, GPIO_NUM_PINS); + qdev_init_gpio_in(DEVICE(obj), stm32l4x5_gpio_set, GPIO_NUM_PINS); + + s->clk = qdev_init_clock_in(DEVICE(s), "clk", NULL, s, 0); + + object_property_add(obj, "disconnected-pins", "uint16", + disconnected_pins_get, disconnected_pins_set, + NULL, &s->disconnected_pins); + object_property_add(obj, "clock-freq-hz", "uint32", + clock_freq_get, NULL, NULL, NULL); +} + +static void stm32l4x5_gpio_realize(DeviceState *dev, Error **errp) +{ + Stm32l4x5GpioState *s = STM32L4X5_GPIO(dev); + if (!clock_has_source(s->clk)) { + error_setg(errp, "GPIO: clk input must be connected"); + return; + } +} + +static const VMStateDescription vmstate_stm32l4x5_gpio = { + .name = TYPE_STM32L4X5_GPIO, + .version_id = 1, + .minimum_version_id = 1, + .fields = (VMStateField[]){ + VMSTATE_UINT32(moder, Stm32l4x5GpioState), + VMSTATE_UINT32(otyper, Stm32l4x5GpioState), + VMSTATE_UINT32(ospeedr, Stm32l4x5GpioState), + VMSTATE_UINT32(pupdr, Stm32l4x5GpioState), + VMSTATE_UINT32(idr, Stm32l4x5GpioState), + VMSTATE_UINT32(odr, Stm32l4x5GpioState), + VMSTATE_UINT32(lckr, Stm32l4x5GpioState), + VMSTATE_UINT32(afrl, Stm32l4x5GpioState), + VMSTATE_UINT32(afrh, Stm32l4x5GpioState), + VMSTATE_UINT32(ascr, Stm32l4x5GpioState), + VMSTATE_UINT16(disconnected_pins, Stm32l4x5GpioState), + VMSTATE_UINT16(pins_connected_high, Stm32l4x5GpioState), + VMSTATE_END_OF_LIST() + } +}; + +static Property stm32l4x5_gpio_properties[] = { + DEFINE_PROP_STRING("name", Stm32l4x5GpioState, name), + DEFINE_PROP_UINT32("mode-reset", Stm32l4x5GpioState, moder_reset, 0), + DEFINE_PROP_UINT32("ospeed-reset", Stm32l4x5GpioState, ospeedr_reset, 0), + DEFINE_PROP_UINT32("pupd-reset", Stm32l4x5GpioState, pupdr_reset, 0), + DEFINE_PROP_END_OF_LIST(), +}; + +static void stm32l4x5_gpio_class_init(ObjectClass *klass, void *data) +{ + DeviceClass *dc = DEVICE_CLASS(klass); + ResettableClass *rc = RESETTABLE_CLASS(klass); + + device_class_set_props(dc, stm32l4x5_gpio_properties); + dc->vmsd = &vmstate_stm32l4x5_gpio; + dc->realize = stm32l4x5_gpio_realize; + rc->phases.hold = stm32l4x5_gpio_reset_hold; +} + +static const TypeInfo stm32l4x5_gpio_types[] = { + { + .name = TYPE_STM32L4X5_GPIO, + .parent = TYPE_SYS_BUS_DEVICE, + .instance_size = sizeof(Stm32l4x5GpioState), + .instance_init = stm32l4x5_gpio_init, + .class_init = stm32l4x5_gpio_class_init, + }, +}; + +DEFINE_TYPES(stm32l4x5_gpio_types) diff --git a/hw/gpio/trace-events b/hw/gpio/trace-events index 9736b362ac..9331f4289d 100644 --- a/hw/gpio/trace-events +++ b/hw/gpio/trace-events @@ -31,3 +31,9 @@ sifive_gpio_update_output_irq(int64_t line, int64_t value) "line %" PRIi64 " val # aspeed_gpio.c aspeed_gpio_read(uint64_t offset, uint64_t value) "offset: 0x%" PRIx64 " value 0x%" PRIx64 aspeed_gpio_write(uint64_t offset, uint64_t value) "offset: 0x%" PRIx64 " value 0x%" PRIx64 + +# stm32l4x5_gpio.c +stm32l4x5_gpio_read(char *gpio, uint64_t addr) "GPIO%s addr: 0x%" PRIx64 " " +stm32l4x5_gpio_write(char *gpio, uint64_t addr, uint64_t data) "GPIO%s addr: 0x%" PRIx64 " val: 0x%" PRIx64 "" +stm32l4x5_gpio_update_idr(char *gpio, uint32_t old_idr, uint32_t new_idr) "GPIO%s from: 0x%x to: 0x%x" +stm32l4x5_gpio_pins(char *gpio, uint16_t disconnected, uint16_t high) "GPIO%s disconnected pins: 0x%x levels: 0x%x" diff --git a/hw/misc/stm32l4x5_syscfg.c b/hw/misc/stm32l4x5_syscfg.c index fd68cb800b..3dafc00b49 100644 --- a/hw/misc/stm32l4x5_syscfg.c +++ b/hw/misc/stm32l4x5_syscfg.c @@ -27,6 +27,7 @@ #include "hw/irq.h" #include "migration/vmstate.h" #include "hw/misc/stm32l4x5_syscfg.h" +#include "hw/gpio/stm32l4x5_gpio.h" #define SYSCFG_MEMRMP 0x00 #define SYSCFG_CFGR1 0x04 diff --git a/hw/rtc/sun4v-rtc.c b/hw/rtc/sun4v-rtc.c index e037acd1b5..ffcc0aa25d 100644 --- a/hw/rtc/sun4v-rtc.c +++ b/hw/rtc/sun4v-rtc.c @@ -5,7 +5,7 @@ * * Copyright (c) 2016 Artyom Tarasenko * - * This code is licensed under the GNU GPL v3 or (at your option) any later + * This code is licensed under the GNU GPL v2 or (at your option) any later * version. */ |