diff options
Diffstat (limited to 'hw')
| -rw-r--r-- | hw/arm/boot.c | 95 | ||||
| -rw-r--r-- | hw/arm/sbsa-ref.c | 21 | ||||
| -rw-r--r-- | hw/arm/smmuv3-internal.h | 38 | ||||
| -rw-r--r-- | hw/arm/smmuv3.c | 8 | ||||
| -rw-r--r-- | hw/arm/virt-acpi-build.c | 12 | ||||
| -rw-r--r-- | hw/arm/virt.c | 24 | ||||
| -rw-r--r-- | hw/misc/bcm2835_property.c | 2 | ||||
| -rw-r--r-- | hw/nvram/xlnx-bbram.c | 8 | ||||
| -rw-r--r-- | hw/nvram/xlnx-versal-efuse-ctrl.c | 8 | ||||
| -rw-r--r-- | hw/nvram/xlnx-zynqmp-efuse.c | 8 | ||||
| -rw-r--r-- | hw/timer/npcm7xx_timer.c | 3 |
11 files changed, 115 insertions, 112 deletions
diff --git a/hw/arm/boot.c b/hw/arm/boot.c index 24fa169060..84ea6a807a 100644 --- a/hw/arm/boot.c +++ b/hw/arm/boot.c @@ -722,84 +722,35 @@ static void do_cpu_reset(void *opaque) cpu_set_pc(cs, entry); } else { - /* If we are booting Linux then we need to check whether we are - * booting into secure or non-secure state and adjust the state - * accordingly. Out of reset, ARM is defined to be in secure state - * (SCR.NS = 0), we change that here if non-secure boot has been - * requested. + /* + * If we are booting Linux then we might need to do so at: + * - AArch64 NS EL2 or NS EL1 + * - AArch32 Secure SVC (EL3) + * - AArch32 NS Hyp (EL2) + * - AArch32 NS SVC (EL1) + * Configure the CPU in the way boot firmware would do to + * drop us down to the appropriate level. */ - if (arm_feature(env, ARM_FEATURE_EL3)) { - /* AArch64 is defined to come out of reset into EL3 if enabled. - * If we are booting Linux then we need to adjust our EL as - * Linux expects us to be in EL2 or EL1. AArch32 resets into - * SVC, which Linux expects, so no privilege/exception level to - * adjust. - */ - if (env->aarch64) { - env->cp15.scr_el3 |= SCR_RW; - if (arm_feature(env, ARM_FEATURE_EL2)) { - env->cp15.hcr_el2 |= HCR_RW; - env->pstate = PSTATE_MODE_EL2h; - } else { - env->pstate = PSTATE_MODE_EL1h; - } - if (cpu_isar_feature(aa64_pauth, cpu)) { - env->cp15.scr_el3 |= SCR_API | SCR_APK; - } - if (cpu_isar_feature(aa64_mte, cpu)) { - env->cp15.scr_el3 |= SCR_ATA; - } - if (cpu_isar_feature(aa64_sve, cpu)) { - env->cp15.cptr_el[3] |= R_CPTR_EL3_EZ_MASK; - env->vfp.zcr_el[3] = 0xf; - } - if (cpu_isar_feature(aa64_sme, cpu)) { - env->cp15.cptr_el[3] |= R_CPTR_EL3_ESM_MASK; - env->cp15.scr_el3 |= SCR_ENTP2; - env->vfp.smcr_el[3] = 0xf; - } - if (cpu_isar_feature(aa64_hcx, cpu)) { - env->cp15.scr_el3 |= SCR_HXEN; - } - if (cpu_isar_feature(aa64_fgt, cpu)) { - env->cp15.scr_el3 |= SCR_FGTEN; - } + int target_el = arm_feature(env, ARM_FEATURE_EL2) ? 2 : 1; - /* AArch64 kernels never boot in secure mode */ - assert(!info->secure_boot); - /* This hook is only supported for AArch32 currently: - * bootloader_aarch64[] will not call the hook, and - * the code above has already dropped us into EL2 or EL1. - */ - assert(!info->secure_board_setup); - } - - if (arm_feature(env, ARM_FEATURE_EL2)) { - /* If we have EL2 then Linux expects the HVC insn to work */ - env->cp15.scr_el3 |= SCR_HCE; - } - - /* Set to non-secure if not a secure boot */ - if (!info->secure_boot && - (cs != first_cpu || !info->secure_board_setup)) { - /* Linux expects non-secure state */ - env->cp15.scr_el3 |= SCR_NS; - /* Set NSACR.{CP11,CP10} so NS can access the FPU */ - env->cp15.nsacr |= 3 << 10; - } - } - - if (!env->aarch64 && !info->secure_boot && - arm_feature(env, ARM_FEATURE_EL2)) { + if (env->aarch64) { /* - * This is an AArch32 boot not to Secure state, and - * we have Hyp mode available, so boot the kernel into - * Hyp mode. This is not how the CPU comes out of reset, - * so we need to manually put it there. + * AArch64 kernels never boot in secure mode, and we don't + * support the secure_board_setup hook for AArch64. */ - cpsr_write(env, ARM_CPU_MODE_HYP, CPSR_M, CPSRWriteRaw); + assert(!info->secure_boot); + assert(!info->secure_board_setup); + } else { + if (arm_feature(env, ARM_FEATURE_EL3) && + (info->secure_boot || + (info->secure_board_setup && cs == first_cpu))) { + /* Start this CPU in Secure SVC */ + target_el = 3; + } } + arm_emulate_firmware_reset(cs, target_el); + if (cs == first_cpu) { AddressSpace *as = arm_boot_address_space(cpu, info); diff --git a/hw/arm/sbsa-ref.c b/hw/arm/sbsa-ref.c index 3c7dfcd6dc..e8a82618f0 100644 --- a/hw/arm/sbsa-ref.c +++ b/hw/arm/sbsa-ref.c @@ -2,6 +2,7 @@ * ARM SBSA Reference Platform emulation * * Copyright (c) 2018 Linaro Limited + * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved. * Written by Hongbo Zhang <hongbo.zhang@linaro.org> * * This program is free software; you can redistribute it and/or modify it @@ -30,6 +31,7 @@ #include "exec/hwaddr.h" #include "kvm_arm.h" #include "hw/arm/boot.h" +#include "hw/arm/bsa.h" #include "hw/arm/fdt.h" #include "hw/arm/smmuv3.h" #include "hw/block/flash.h" @@ -55,14 +57,6 @@ #define NUM_SMMU_IRQS 4 #define NUM_SATA_PORTS 6 -#define VIRTUAL_PMU_IRQ 7 -#define ARCH_GIC_MAINT_IRQ 9 -#define ARCH_TIMER_VIRT_IRQ 11 -#define ARCH_TIMER_S_EL1_IRQ 13 -#define ARCH_TIMER_NS_EL1_IRQ 14 -#define ARCH_TIMER_NS_EL2_IRQ 10 -#define ARCH_TIMER_NS_EL2_VIRT_IRQ 12 - enum { SBSA_FLASH, SBSA_MEM, @@ -479,7 +473,7 @@ static void create_gic(SBSAMachineState *sms, MemoryRegion *mem) */ for (i = 0; i < smp_cpus; i++) { DeviceState *cpudev = DEVICE(qemu_get_cpu(i)); - int ppibase = NUM_IRQS + i * GIC_INTERNAL + GIC_NR_SGIS; + int intidbase = NUM_IRQS + i * GIC_INTERNAL; int irq; /* * Mapping from the output timer irq lines from the CPU to the @@ -496,14 +490,17 @@ static void create_gic(SBSAMachineState *sms, MemoryRegion *mem) for (irq = 0; irq < ARRAY_SIZE(timer_irq); irq++) { qdev_connect_gpio_out(cpudev, irq, qdev_get_gpio_in(sms->gic, - ppibase + timer_irq[irq])); + intidbase + timer_irq[irq])); } qdev_connect_gpio_out_named(cpudev, "gicv3-maintenance-interrupt", 0, - qdev_get_gpio_in(sms->gic, ppibase + qdev_get_gpio_in(sms->gic, + intidbase + ARCH_GIC_MAINT_IRQ)); + qdev_connect_gpio_out_named(cpudev, "pmu-interrupt", 0, - qdev_get_gpio_in(sms->gic, ppibase + qdev_get_gpio_in(sms->gic, + intidbase + VIRTUAL_PMU_IRQ)); sysbus_connect_irq(gicbusdev, i, qdev_get_gpio_in(cpudev, ARM_CPU_IRQ)); diff --git a/hw/arm/smmuv3-internal.h b/hw/arm/smmuv3-internal.h index 648c2e37a2..6076025ad6 100644 --- a/hw/arm/smmuv3-internal.h +++ b/hw/arm/smmuv3-internal.h @@ -38,33 +38,71 @@ REG32(IDR0, 0x0) FIELD(IDR0, S1P, 1 , 1) FIELD(IDR0, TTF, 2 , 2) FIELD(IDR0, COHACC, 4 , 1) + FIELD(IDR0, BTM, 5 , 1) + FIELD(IDR0, HTTU, 6 , 2) + FIELD(IDR0, DORMHINT, 8 , 1) + FIELD(IDR0, HYP, 9 , 1) + FIELD(IDR0, ATS, 10, 1) + FIELD(IDR0, NS1ATS, 11, 1) FIELD(IDR0, ASID16, 12, 1) + FIELD(IDR0, MSI, 13, 1) + FIELD(IDR0, SEV, 14, 1) + FIELD(IDR0, ATOS, 15, 1) + FIELD(IDR0, PRI, 16, 1) + FIELD(IDR0, VMW, 17, 1) FIELD(IDR0, VMID16, 18, 1) + FIELD(IDR0, CD2L, 19, 1) + FIELD(IDR0, VATOS, 20, 1) FIELD(IDR0, TTENDIAN, 21, 2) + FIELD(IDR0, ATSRECERR, 23, 1) FIELD(IDR0, STALL_MODEL, 24, 2) FIELD(IDR0, TERM_MODEL, 26, 1) FIELD(IDR0, STLEVEL, 27, 2) + FIELD(IDR0, RME_IMPL, 30, 1) REG32(IDR1, 0x4) FIELD(IDR1, SIDSIZE, 0 , 6) + FIELD(IDR1, SSIDSIZE, 6 , 5) + FIELD(IDR1, PRIQS, 11, 5) FIELD(IDR1, EVENTQS, 16, 5) FIELD(IDR1, CMDQS, 21, 5) + FIELD(IDR1, ATTR_PERMS_OVR, 26, 1) + FIELD(IDR1, ATTR_TYPES_OVR, 27, 1) + FIELD(IDR1, REL, 28, 1) + FIELD(IDR1, QUEUES_PRESET, 29, 1) + FIELD(IDR1, TABLES_PRESET, 30, 1) + FIELD(IDR1, ECMDQ, 31, 1) #define SMMU_IDR1_SIDSIZE 16 #define SMMU_CMDQS 19 #define SMMU_EVENTQS 19 REG32(IDR2, 0x8) + FIELD(IDR2, BA_VATOS, 0, 10) + REG32(IDR3, 0xc) FIELD(IDR3, HAD, 2, 1); + FIELD(IDR3, PBHA, 3, 1); + FIELD(IDR3, XNX, 4, 1); + FIELD(IDR3, PPS, 5, 1); + FIELD(IDR3, MPAM, 7, 1); + FIELD(IDR3, FWB, 8, 1); + FIELD(IDR3, STT, 9, 1); FIELD(IDR3, RIL, 10, 1); FIELD(IDR3, BBML, 11, 2); + FIELD(IDR3, E0PD, 13, 1); + FIELD(IDR3, PTWNNC, 14, 1); + FIELD(IDR3, DPT, 15, 1); + REG32(IDR4, 0x10) + REG32(IDR5, 0x14) FIELD(IDR5, OAS, 0, 3); FIELD(IDR5, GRAN4K, 4, 1); FIELD(IDR5, GRAN16K, 5, 1); FIELD(IDR5, GRAN64K, 6, 1); + FIELD(IDR5, VAX, 10, 2); + FIELD(IDR5, STALL_MAX, 16, 16); #define SMMU_IDR5_OAS 4 diff --git a/hw/arm/smmuv3.c b/hw/arm/smmuv3.c index 6f2b2bd45f..c3871ae067 100644 --- a/hw/arm/smmuv3.c +++ b/hw/arm/smmuv3.c @@ -278,15 +278,19 @@ static void smmuv3_init_regs(SMMUv3State *s) s->idr[1] = FIELD_DP32(s->idr[1], IDR1, EVENTQS, SMMU_EVENTQS); s->idr[1] = FIELD_DP32(s->idr[1], IDR1, CMDQS, SMMU_CMDQS); - s->idr[3] = FIELD_DP32(s->idr[3], IDR3, RIL, 1); s->idr[3] = FIELD_DP32(s->idr[3], IDR3, HAD, 1); + if (FIELD_EX32(s->idr[0], IDR0, S2P)) { + /* XNX is a stage-2-specific feature */ + s->idr[3] = FIELD_DP32(s->idr[3], IDR3, XNX, 1); + } + s->idr[3] = FIELD_DP32(s->idr[3], IDR3, RIL, 1); s->idr[3] = FIELD_DP32(s->idr[3], IDR3, BBML, 2); + s->idr[5] = FIELD_DP32(s->idr[5], IDR5, OAS, SMMU_IDR5_OAS); /* 44 bits */ /* 4K, 16K and 64K granule support */ s->idr[5] = FIELD_DP32(s->idr[5], IDR5, GRAN4K, 1); s->idr[5] = FIELD_DP32(s->idr[5], IDR5, GRAN16K, 1); s->idr[5] = FIELD_DP32(s->idr[5], IDR5, GRAN64K, 1); - s->idr[5] = FIELD_DP32(s->idr[5], IDR5, OAS, SMMU_IDR5_OAS); /* 44 bits */ s->cmdq.base = deposit64(s->cmdq.base, 0, 5, SMMU_CMDQS); s->cmdq.prod = 0; diff --git a/hw/arm/virt-acpi-build.c b/hw/arm/virt-acpi-build.c index 6b674231c2..9ce136cd88 100644 --- a/hw/arm/virt-acpi-build.c +++ b/hw/arm/virt-acpi-build.c @@ -601,21 +601,21 @@ build_gtdt(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms) * The interrupt values are the same with the device tree when adding 16 */ /* Secure EL1 timer GSIV */ - build_append_int_noprefix(table_data, ARCH_TIMER_S_EL1_IRQ + 16, 4); + build_append_int_noprefix(table_data, ARCH_TIMER_S_EL1_IRQ, 4); /* Secure EL1 timer Flags */ build_append_int_noprefix(table_data, irqflags, 4); /* Non-Secure EL1 timer GSIV */ - build_append_int_noprefix(table_data, ARCH_TIMER_NS_EL1_IRQ + 16, 4); + build_append_int_noprefix(table_data, ARCH_TIMER_NS_EL1_IRQ, 4); /* Non-Secure EL1 timer Flags */ build_append_int_noprefix(table_data, irqflags | 1UL << 2, /* Always-on Capability */ 4); /* Virtual timer GSIV */ - build_append_int_noprefix(table_data, ARCH_TIMER_VIRT_IRQ + 16, 4); + build_append_int_noprefix(table_data, ARCH_TIMER_VIRT_IRQ, 4); /* Virtual Timer Flags */ build_append_int_noprefix(table_data, irqflags, 4); /* Non-Secure EL2 timer GSIV */ - build_append_int_noprefix(table_data, ARCH_TIMER_NS_EL2_IRQ + 16, 4); + build_append_int_noprefix(table_data, ARCH_TIMER_NS_EL2_IRQ, 4); /* Non-Secure EL2 timer Flags */ build_append_int_noprefix(table_data, irqflags, 4); /* CntReadBase Physical address */ @@ -729,9 +729,9 @@ build_madt(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms) for (i = 0; i < MACHINE(vms)->smp.cpus; i++) { ARMCPU *armcpu = ARM_CPU(qemu_get_cpu(i)); uint64_t physical_base_address = 0, gich = 0, gicv = 0; - uint32_t vgic_interrupt = vms->virt ? PPI(ARCH_GIC_MAINT_IRQ) : 0; + uint32_t vgic_interrupt = vms->virt ? ARCH_GIC_MAINT_IRQ : 0; uint32_t pmu_interrupt = arm_feature(&armcpu->env, ARM_FEATURE_PMU) ? - PPI(VIRTUAL_PMU_IRQ) : 0; + VIRTUAL_PMU_IRQ : 0; if (vms->gic_version == VIRT_GIC_VERSION_2) { physical_base_address = memmap[VIRT_GIC_CPU].base; diff --git a/hw/arm/virt.c b/hw/arm/virt.c index 15e74249f9..ebc9f3fdb1 100644 --- a/hw/arm/virt.c +++ b/hw/arm/virt.c @@ -366,10 +366,14 @@ static void fdt_add_timer_nodes(const VirtMachineState *vms) } qemu_fdt_setprop(ms->fdt, "/timer", "always-on", NULL, 0); qemu_fdt_setprop_cells(ms->fdt, "/timer", "interrupts", - GIC_FDT_IRQ_TYPE_PPI, ARCH_TIMER_S_EL1_IRQ, irqflags, - GIC_FDT_IRQ_TYPE_PPI, ARCH_TIMER_NS_EL1_IRQ, irqflags, - GIC_FDT_IRQ_TYPE_PPI, ARCH_TIMER_VIRT_IRQ, irqflags, - GIC_FDT_IRQ_TYPE_PPI, ARCH_TIMER_NS_EL2_IRQ, irqflags); + GIC_FDT_IRQ_TYPE_PPI, + INTID_TO_PPI(ARCH_TIMER_S_EL1_IRQ), irqflags, + GIC_FDT_IRQ_TYPE_PPI, + INTID_TO_PPI(ARCH_TIMER_NS_EL1_IRQ), irqflags, + GIC_FDT_IRQ_TYPE_PPI, + INTID_TO_PPI(ARCH_TIMER_VIRT_IRQ), irqflags, + GIC_FDT_IRQ_TYPE_PPI, + INTID_TO_PPI(ARCH_TIMER_NS_EL2_IRQ), irqflags); } static void fdt_add_cpu_nodes(const VirtMachineState *vms) @@ -800,7 +804,7 @@ static void create_gic(VirtMachineState *vms, MemoryRegion *mem) */ for (i = 0; i < smp_cpus; i++) { DeviceState *cpudev = DEVICE(qemu_get_cpu(i)); - int ppibase = NUM_IRQS + i * GIC_INTERNAL + GIC_NR_SGIS; + int intidbase = NUM_IRQS + i * GIC_INTERNAL; /* Mapping from the output timer irq lines from the CPU to the * GIC PPI inputs we use for the virt board. */ @@ -814,22 +818,22 @@ static void create_gic(VirtMachineState *vms, MemoryRegion *mem) for (unsigned irq = 0; irq < ARRAY_SIZE(timer_irq); irq++) { qdev_connect_gpio_out(cpudev, irq, qdev_get_gpio_in(vms->gic, - ppibase + timer_irq[irq])); + intidbase + timer_irq[irq])); } if (vms->gic_version != VIRT_GIC_VERSION_2) { qemu_irq irq = qdev_get_gpio_in(vms->gic, - ppibase + ARCH_GIC_MAINT_IRQ); + intidbase + ARCH_GIC_MAINT_IRQ); qdev_connect_gpio_out_named(cpudev, "gicv3-maintenance-interrupt", 0, irq); } else if (vms->virt) { qemu_irq irq = qdev_get_gpio_in(vms->gic, - ppibase + ARCH_GIC_MAINT_IRQ); + intidbase + ARCH_GIC_MAINT_IRQ); sysbus_connect_irq(gicbusdev, i + 4 * smp_cpus, irq); } qdev_connect_gpio_out_named(cpudev, "pmu-interrupt", 0, - qdev_get_gpio_in(vms->gic, ppibase + qdev_get_gpio_in(vms->gic, intidbase + VIRTUAL_PMU_IRQ)); sysbus_connect_irq(gicbusdev, i, qdev_get_gpio_in(cpudev, ARM_CPU_IRQ)); @@ -1989,7 +1993,7 @@ static void virt_cpu_post_init(VirtMachineState *vms, MemoryRegion *sysmem) if (pmu) { assert(arm_feature(&ARM_CPU(cpu)->env, ARM_FEATURE_PMU)); if (kvm_irqchip_in_kernel()) { - kvm_arm_pmu_set_irq(cpu, PPI(VIRTUAL_PMU_IRQ)); + kvm_arm_pmu_set_irq(cpu, VIRTUAL_PMU_IRQ); } kvm_arm_pmu_init(cpu); } diff --git a/hw/misc/bcm2835_property.c b/hw/misc/bcm2835_property.c index 4ed9faa54a..ff55a4e2cd 100644 --- a/hw/misc/bcm2835_property.c +++ b/hw/misc/bcm2835_property.c @@ -12,7 +12,7 @@ #include "migration/vmstate.h" #include "hw/irq.h" #include "hw/misc/bcm2835_mbox_defs.h" -#include "hw/misc/raspberrypi-fw-defs.h" +#include "hw/arm/raspberrypi-fw-defs.h" #include "sysemu/dma.h" #include "qemu/log.h" #include "qemu/module.h" diff --git a/hw/nvram/xlnx-bbram.c b/hw/nvram/xlnx-bbram.c index c6b484cc85..e18e7770e1 100644 --- a/hw/nvram/xlnx-bbram.c +++ b/hw/nvram/xlnx-bbram.c @@ -2,6 +2,7 @@ * QEMU model of the Xilinx BBRAM Battery Backed RAM * * Copyright (c) 2014-2021 Xilinx Inc. + * Copyright (c) 2023 Advanced Micro Devices, Inc. * * Permission is hereby granted, free of charge, to any person obtaining a copy * of this software and associated documentation files (the "Software"), to deal @@ -416,9 +417,9 @@ static RegisterAccessInfo bbram_ctrl_regs_info[] = { } }; -static void bbram_ctrl_reset(DeviceState *dev) +static void bbram_ctrl_reset_hold(Object *obj) { - XlnxBBRam *s = XLNX_BBRAM(dev); + XlnxBBRam *s = XLNX_BBRAM(obj); unsigned int i; for (i = 0; i < ARRAY_SIZE(s->regs_info); ++i) { @@ -522,8 +523,9 @@ static Property bbram_ctrl_props[] = { static void bbram_ctrl_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); + ResettableClass *rc = RESETTABLE_CLASS(klass); - dc->reset = bbram_ctrl_reset; + rc->phases.hold = bbram_ctrl_reset_hold; dc->realize = bbram_ctrl_realize; dc->vmsd = &vmstate_bbram_ctrl; device_class_set_props(dc, bbram_ctrl_props); diff --git a/hw/nvram/xlnx-versal-efuse-ctrl.c b/hw/nvram/xlnx-versal-efuse-ctrl.c index b35ba65ab5..beb5661c35 100644 --- a/hw/nvram/xlnx-versal-efuse-ctrl.c +++ b/hw/nvram/xlnx-versal-efuse-ctrl.c @@ -2,6 +2,7 @@ * QEMU model of the Versal eFuse controller * * Copyright (c) 2020 Xilinx Inc. + * Copyright (c) 2023 Advanced Micro Devices, Inc. * * Permission is hereby granted, free of charge, to any person obtaining a copy * of this software and associated documentation files (the "Software"), to deal @@ -657,9 +658,9 @@ static void efuse_ctrl_register_reset(RegisterInfo *reg) register_reset(reg); } -static void efuse_ctrl_reset(DeviceState *dev) +static void efuse_ctrl_reset_hold(Object *obj) { - XlnxVersalEFuseCtrl *s = XLNX_VERSAL_EFUSE_CTRL(dev); + XlnxVersalEFuseCtrl *s = XLNX_VERSAL_EFUSE_CTRL(obj); unsigned int i; for (i = 0; i < ARRAY_SIZE(s->regs_info); ++i) { @@ -749,8 +750,9 @@ static Property efuse_ctrl_props[] = { static void efuse_ctrl_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); + ResettableClass *rc = RESETTABLE_CLASS(klass); - dc->reset = efuse_ctrl_reset; + rc->phases.hold = efuse_ctrl_reset_hold; dc->realize = efuse_ctrl_realize; dc->vmsd = &vmstate_efuse_ctrl; device_class_set_props(dc, efuse_ctrl_props); diff --git a/hw/nvram/xlnx-zynqmp-efuse.c b/hw/nvram/xlnx-zynqmp-efuse.c index 228ba0bbfa..3db5f98ec1 100644 --- a/hw/nvram/xlnx-zynqmp-efuse.c +++ b/hw/nvram/xlnx-zynqmp-efuse.c @@ -2,6 +2,7 @@ * QEMU model of the ZynqMP eFuse * * Copyright (c) 2015 Xilinx Inc. + * Copyright (c) 2023 Advanced Micro Devices, Inc. * * Written by Edgar E. Iglesias <edgari@xilinx.com> * @@ -769,9 +770,9 @@ static void zynqmp_efuse_register_reset(RegisterInfo *reg) register_reset(reg); } -static void zynqmp_efuse_reset(DeviceState *dev) +static void zynqmp_efuse_reset_hold(Object *obj) { - XlnxZynqMPEFuse *s = XLNX_ZYNQMP_EFUSE(dev); + XlnxZynqMPEFuse *s = XLNX_ZYNQMP_EFUSE(obj); unsigned int i; for (i = 0; i < ARRAY_SIZE(s->regs_info); ++i) { @@ -837,8 +838,9 @@ static Property zynqmp_efuse_props[] = { static void zynqmp_efuse_class_init(ObjectClass *klass, void *data) { DeviceClass *dc = DEVICE_CLASS(klass); + ResettableClass *rc = RESETTABLE_CLASS(klass); - dc->reset = zynqmp_efuse_reset; + rc->phases.hold = zynqmp_efuse_reset_hold; dc->realize = zynqmp_efuse_realize; dc->vmsd = &vmstate_efuse; device_class_set_props(dc, zynqmp_efuse_props); diff --git a/hw/timer/npcm7xx_timer.c b/hw/timer/npcm7xx_timer.c index 32f5e021f8..a8bd93aeb2 100644 --- a/hw/timer/npcm7xx_timer.c +++ b/hw/timer/npcm7xx_timer.c @@ -138,6 +138,9 @@ static int64_t npcm7xx_timer_count_to_ns(NPCM7xxTimer *t, uint32_t count) /* Convert a time interval in nanoseconds to a timer cycle count. */ static uint32_t npcm7xx_timer_ns_to_count(NPCM7xxTimer *t, int64_t ns) { + if (ns < 0) { + return 0; + } return clock_ns_to_ticks(t->ctrl->clock, ns) / npcm7xx_tcsr_prescaler(t->tcsr); } |