diff options
Diffstat (limited to 'include/hw')
| -rw-r--r-- | include/hw/arm/exynos4210.h | 50 | ||||
| -rw-r--r-- | include/hw/arm/xlnx-versal.h | 16 | ||||
| -rw-r--r-- | include/hw/arm/xlnx-zynqmp.h | 4 | ||||
| -rw-r--r-- | include/hw/intc/exynos4210_combiner.h | 57 | ||||
| -rw-r--r-- | include/hw/intc/exynos4210_gic.h | 43 | ||||
| -rw-r--r-- | include/hw/irq.h | 5 | ||||
| -rw-r--r-- | include/hw/misc/npcm7xx_gcr.h | 30 | ||||
| -rw-r--r-- | include/hw/misc/xlnx-versal-crl.h | 235 | ||||
| -rw-r--r-- | include/hw/timer/cadence_ttc.h | 54 |
9 files changed, 458 insertions, 36 deletions
diff --git a/include/hw/arm/exynos4210.h b/include/hw/arm/exynos4210.h index 60b9e126f5..97353f1c02 100644 --- a/include/hw/arm/exynos4210.h +++ b/include/hw/arm/exynos4210.h @@ -26,6 +26,10 @@ #include "hw/or-irq.h" #include "hw/sysbus.h" +#include "hw/cpu/a9mpcore.h" +#include "hw/intc/exynos4210_gic.h" +#include "hw/intc/exynos4210_combiner.h" +#include "hw/core/split-irq.h" #include "target/arm/cpu-qom.h" #include "qom/object.h" @@ -65,34 +69,25 @@ #define EXYNOS4210_MAX_EXT_COMBINER_IN_IRQ \ (EXYNOS4210_MAX_EXT_COMBINER_OUT_IRQ * 8) -#define EXYNOS4210_COMBINER_GET_IRQ_NUM(grp, bit) ((grp)*8 + (bit)) -#define EXYNOS4210_COMBINER_GET_GRP_NUM(irq) ((irq) / 8) -#define EXYNOS4210_COMBINER_GET_BIT_NUM(irq) \ - ((irq) - 8 * EXYNOS4210_COMBINER_GET_GRP_NUM(irq)) - -/* IRQs number for external and internal GIC */ -#define EXYNOS4210_EXT_GIC_NIRQ (160-32) -#define EXYNOS4210_INT_GIC_NIRQ 64 - #define EXYNOS4210_I2C_NUMBER 9 #define EXYNOS4210_NUM_DMA 3 -typedef struct Exynos4210Irq { - qemu_irq int_combiner_irq[EXYNOS4210_MAX_INT_COMBINER_IN_IRQ]; - qemu_irq ext_combiner_irq[EXYNOS4210_MAX_EXT_COMBINER_IN_IRQ]; - qemu_irq int_gic_irq[EXYNOS4210_INT_GIC_NIRQ]; - qemu_irq ext_gic_irq[EXYNOS4210_EXT_GIC_NIRQ]; - qemu_irq board_irqs[EXYNOS4210_MAX_INT_COMBINER_IN_IRQ]; -} Exynos4210Irq; +/* + * We need one splitter for every external combiner input, plus + * one for every non-zero entry in combiner_grp_to_gic_id[], + * minus one for every external combiner ID in second or later + * places in a combinermap[] line. + * We'll assert in exynos4210_init_board_irqs() if this is wrong. + */ +#define EXYNOS4210_NUM_SPLITTERS (EXYNOS4210_MAX_EXT_COMBINER_IN_IRQ + 38) struct Exynos4210State { /*< private >*/ SysBusDevice parent_obj; /*< public >*/ ARMCPU *cpu[EXYNOS4210_NCPUS]; - Exynos4210Irq irqs; - qemu_irq *irq_table; + qemu_irq irq_table[EXYNOS4210_MAX_INT_COMBINER_IN_IRQ]; MemoryRegion chipid_mem; MemoryRegion iram_mem; @@ -102,6 +97,12 @@ struct Exynos4210State { MemoryRegion bootreg_mem; I2CBus *i2c_if[EXYNOS4210_I2C_NUMBER]; qemu_or_irq pl330_irq_orgate[EXYNOS4210_NUM_DMA]; + qemu_or_irq cpu_irq_orgate[EXYNOS4210_NCPUS]; + A9MPPrivState a9mpcore; + Exynos4210GicState ext_gic; + Exynos4210CombinerState int_combiner; + Exynos4210CombinerState ext_combiner; + SplitIRQ splitter[EXYNOS4210_NUM_SPLITTERS]; }; #define TYPE_EXYNOS4210_SOC "exynos4210" @@ -110,13 +111,6 @@ OBJECT_DECLARE_SIMPLE_TYPE(Exynos4210State, EXYNOS4210_SOC) void exynos4210_write_secondary(ARMCPU *cpu, const struct arm_boot_info *info); -/* Initialize exynos4210 IRQ subsystem stub */ -qemu_irq *exynos4210_init_irq(Exynos4210Irq *env); - -/* Initialize board IRQs. - * These IRQs contain splitted Int/External Combiner and External Gic IRQs */ -void exynos4210_init_board_irqs(Exynos4210Irq *s); - /* Get IRQ number from exynos4210 IRQ subsystem stub. * To identify IRQ source use internal combiner group and bit number * grp - group number @@ -124,12 +118,6 @@ void exynos4210_init_board_irqs(Exynos4210Irq *s); uint32_t exynos4210_get_irq(uint32_t grp, uint32_t bit); /* - * Get Combiner input GPIO into irqs structure - */ -void exynos4210_combiner_get_gpioin(Exynos4210Irq *irqs, DeviceState *dev, - int ext); - -/* * exynos4210 UART */ DeviceState *exynos4210_uart_create(hwaddr addr, diff --git a/include/hw/arm/xlnx-versal.h b/include/hw/arm/xlnx-versal.h index 0728316ec7..cbe8a19c10 100644 --- a/include/hw/arm/xlnx-versal.h +++ b/include/hw/arm/xlnx-versal.h @@ -14,6 +14,7 @@ #include "hw/sysbus.h" #include "hw/arm/boot.h" +#include "hw/cpu/cluster.h" #include "hw/or-irq.h" #include "hw/sd/sdhci.h" #include "hw/intc/arm_gicv3.h" @@ -28,12 +29,14 @@ #include "hw/nvram/xlnx-versal-efuse.h" #include "hw/ssi/xlnx-versal-ospi.h" #include "hw/dma/xlnx_csu_dma.h" +#include "hw/misc/xlnx-versal-crl.h" #include "hw/misc/xlnx-versal-pmc-iou-slcr.h" #define TYPE_XLNX_VERSAL "xlnx-versal" OBJECT_DECLARE_SIMPLE_TYPE(Versal, XLNX_VERSAL) #define XLNX_VERSAL_NR_ACPUS 2 +#define XLNX_VERSAL_NR_RCPUS 2 #define XLNX_VERSAL_NR_UARTS 2 #define XLNX_VERSAL_NR_GEMS 2 #define XLNX_VERSAL_NR_ADMAS 8 @@ -49,6 +52,7 @@ struct Versal { struct { struct { MemoryRegion mr; + CPUClusterState cluster; ARMCPU cpu[XLNX_VERSAL_NR_ACPUS]; GICv3State gic; } apu; @@ -71,10 +75,21 @@ struct Versal { VersalUsb2 usb; } iou; + /* Real-time Processing Unit. */ + struct { + MemoryRegion mr; + MemoryRegion mr_ps_alias; + + CPUClusterState cluster; + ARMCPU cpu[XLNX_VERSAL_NR_RCPUS]; + } rpu; + struct { qemu_or_irq irq_orgate; XlnxXramCtrl ctrl[XLNX_VERSAL_NR_XRAM]; } xram; + + XlnxVersalCRL crl; } lpd; /* The Platform Management Controller subsystem. */ @@ -115,6 +130,7 @@ struct Versal { #define VERSAL_TIMER_NS_EL1_IRQ 14 #define VERSAL_TIMER_NS_EL2_IRQ 10 +#define VERSAL_CRL_IRQ 10 #define VERSAL_UART0_IRQ_0 18 #define VERSAL_UART1_IRQ_0 19 #define VERSAL_USB0_IRQ_0 22 diff --git a/include/hw/arm/xlnx-zynqmp.h b/include/hw/arm/xlnx-zynqmp.h index 9d9a9d0bf9..85fd9f53da 100644 --- a/include/hw/arm/xlnx-zynqmp.h +++ b/include/hw/arm/xlnx-zynqmp.h @@ -41,6 +41,7 @@ #include "hw/or-irq.h" #include "hw/misc/xlnx-zynqmp-apu-ctrl.h" #include "hw/misc/xlnx-zynqmp-crf.h" +#include "hw/timer/cadence_ttc.h" #define TYPE_XLNX_ZYNQMP "xlnx-zynqmp" OBJECT_DECLARE_SIMPLE_TYPE(XlnxZynqMPState, XLNX_ZYNQMP) @@ -84,6 +85,8 @@ OBJECT_DECLARE_SIMPLE_TYPE(XlnxZynqMPState, XLNX_ZYNQMP) #define XLNX_ZYNQMP_MAX_RAM_SIZE (XLNX_ZYNQMP_MAX_LOW_RAM_SIZE + \ XLNX_ZYNQMP_MAX_HIGH_RAM_SIZE) +#define XLNX_ZYNQMP_NUM_TTC 4 + /* * Unimplemented mmio regions needed to boot some images. */ @@ -128,6 +131,7 @@ struct XlnxZynqMPState { qemu_or_irq qspi_irq_orgate; XlnxZynqMPAPUCtrl apu_ctrl; XlnxZynqMPCRF crf; + CadenceTTCState ttc[XLNX_ZYNQMP_NUM_TTC]; char *boot_cpu; ARMCPU *boot_cpu_ptr; diff --git a/include/hw/intc/exynos4210_combiner.h b/include/hw/intc/exynos4210_combiner.h new file mode 100644 index 0000000000..429844fed4 --- /dev/null +++ b/include/hw/intc/exynos4210_combiner.h @@ -0,0 +1,57 @@ +/* + * Samsung exynos4210 Interrupt Combiner + * + * Copyright (c) 2000 - 2011 Samsung Electronics Co., Ltd. + * All rights reserved. + * + * Evgeny Voevodin <e.voevodin@samsung.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + * See the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef HW_INTC_EXYNOS4210_COMBINER +#define HW_INTC_EXYNOS4210_COMBINER + +#include "hw/sysbus.h" + +/* + * State for each output signal of internal combiner + */ +typedef struct CombinerGroupState { + uint8_t src_mask; /* 1 - source enabled, 0 - disabled */ + uint8_t src_pending; /* Pending source interrupts before masking */ +} CombinerGroupState; + +#define TYPE_EXYNOS4210_COMBINER "exynos4210.combiner" +OBJECT_DECLARE_SIMPLE_TYPE(Exynos4210CombinerState, EXYNOS4210_COMBINER) + +/* Number of groups and total number of interrupts for the internal combiner */ +#define IIC_NGRP 64 +#define IIC_NIRQ (IIC_NGRP * 8) +#define IIC_REGSET_SIZE 0x41 + +struct Exynos4210CombinerState { + SysBusDevice parent_obj; + + MemoryRegion iomem; + + struct CombinerGroupState group[IIC_NGRP]; + uint32_t reg_set[IIC_REGSET_SIZE]; + uint32_t icipsr[2]; + uint32_t external; /* 1 means that this combiner is external */ + + qemu_irq output_irq[IIC_NGRP]; +}; + +#endif diff --git a/include/hw/intc/exynos4210_gic.h b/include/hw/intc/exynos4210_gic.h new file mode 100644 index 0000000000..f64c4069c6 --- /dev/null +++ b/include/hw/intc/exynos4210_gic.h @@ -0,0 +1,43 @@ +/* + * Samsung exynos4210 GIC implementation. Based on hw/arm_gic.c + * + * Copyright (c) 2000 - 2011 Samsung Electronics Co., Ltd. + * All rights reserved. + * + * Evgeny Voevodin <e.voevodin@samsung.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + * See the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, see <http://www.gnu.org/licenses/>. + */ +#ifndef HW_INTC_EXYNOS4210_GIC_H +#define HW_INTC_EXYNOS4210_GIC_H + +#include "hw/sysbus.h" + +#define TYPE_EXYNOS4210_GIC "exynos4210.gic" +OBJECT_DECLARE_SIMPLE_TYPE(Exynos4210GicState, EXYNOS4210_GIC) + +#define EXYNOS4210_GIC_NCPUS 2 + +struct Exynos4210GicState { + SysBusDevice parent_obj; + + MemoryRegion cpu_container; + MemoryRegion dist_container; + MemoryRegion cpu_alias[EXYNOS4210_GIC_NCPUS]; + MemoryRegion dist_alias[EXYNOS4210_GIC_NCPUS]; + uint32_t num_cpu; + DeviceState *gic; +}; + +#endif diff --git a/include/hw/irq.h b/include/hw/irq.h index dc7abf199e..645b73d251 100644 --- a/include/hw/irq.h +++ b/include/hw/irq.h @@ -46,11 +46,6 @@ void qemu_free_irq(qemu_irq irq); /* Returns a new IRQ with opposite polarity. */ qemu_irq qemu_irq_invert(qemu_irq irq); -/* Returns a new IRQ which feeds into both the passed IRQs. - * It's probably better to use the TYPE_SPLIT_IRQ device instead. - */ -qemu_irq qemu_irq_split(qemu_irq irq1, qemu_irq irq2); - /* For internal use in qtest. Similar to qemu_irq_split, but operating on an existing vector of qemu_irq. */ void qemu_irq_intercept_in(qemu_irq *gpio_in, qemu_irq_handler handler, int n); diff --git a/include/hw/misc/npcm7xx_gcr.h b/include/hw/misc/npcm7xx_gcr.h index 13109d9d32..9419e0a7d2 100644 --- a/include/hw/misc/npcm7xx_gcr.h +++ b/include/hw/misc/npcm7xx_gcr.h @@ -20,6 +20,36 @@ #include "hw/sysbus.h" /* + * NPCM7XX PWRON STRAP bit fields + * 12: SPI0 powered by VSBV3 at 1.8V + * 11: System flash attached to BMC + * 10: BSP alternative pins. + * 9:8: Flash UART command route enabled. + * 7: Security enabled. + * 6: HI-Z state control. + * 5: ECC disabled. + * 4: Reserved + * 3: JTAG2 enabled. + * 2:0: CPU and DRAM clock frequency. + */ +#define NPCM7XX_PWRON_STRAP_SPI0F18 BIT(12) +#define NPCM7XX_PWRON_STRAP_SFAB BIT(11) +#define NPCM7XX_PWRON_STRAP_BSPA BIT(10) +#define NPCM7XX_PWRON_STRAP_FUP(x) ((x) << 8) +#define FUP_NORM_UART2 3 +#define FUP_PROG_UART3 2 +#define FUP_PROG_UART2 1 +#define FUP_NORM_UART3 0 +#define NPCM7XX_PWRON_STRAP_SECEN BIT(7) +#define NPCM7XX_PWRON_STRAP_HIZ BIT(6) +#define NPCM7XX_PWRON_STRAP_ECC BIT(5) +#define NPCM7XX_PWRON_STRAP_RESERVE1 BIT(4) +#define NPCM7XX_PWRON_STRAP_J2EN BIT(3) +#define NPCM7XX_PWRON_STRAP_CKFRQ(x) (x) +#define CKFRQ_SKIPINIT 0x000 +#define CKFRQ_DEFAULT 0x111 + +/* * Number of registers in our device state structure. Don't change this without * incrementing the version_id in the vmstate. */ diff --git a/include/hw/misc/xlnx-versal-crl.h b/include/hw/misc/xlnx-versal-crl.h new file mode 100644 index 0000000000..2857f4169a --- /dev/null +++ b/include/hw/misc/xlnx-versal-crl.h @@ -0,0 +1,235 @@ +/* + * QEMU model of the Clock-Reset-LPD (CRL). + * + * Copyright (c) 2022 Xilinx Inc. + * SPDX-License-Identifier: GPL-2.0-or-later + * + * Written by Edgar E. Iglesias <edgar.iglesias@xilinx.com> + */ +#ifndef HW_MISC_XLNX_VERSAL_CRL_H +#define HW_MISC_XLNX_VERSAL_CRL_H + +#include "hw/sysbus.h" +#include "hw/register.h" +#include "target/arm/cpu.h" + +#define TYPE_XLNX_VERSAL_CRL "xlnx,versal-crl" +OBJECT_DECLARE_SIMPLE_TYPE(XlnxVersalCRL, XLNX_VERSAL_CRL) + +REG32(ERR_CTRL, 0x0) + FIELD(ERR_CTRL, SLVERR_ENABLE, 0, 1) +REG32(IR_STATUS, 0x4) + FIELD(IR_STATUS, ADDR_DECODE_ERR, 0, 1) +REG32(IR_MASK, 0x8) + FIELD(IR_MASK, ADDR_DECODE_ERR, 0, 1) +REG32(IR_ENABLE, 0xc) + FIELD(IR_ENABLE, ADDR_DECODE_ERR, 0, 1) +REG32(IR_DISABLE, 0x10) + FIELD(IR_DISABLE, ADDR_DECODE_ERR, 0, 1) +REG32(WPROT, 0x1c) + FIELD(WPROT, ACTIVE, 0, 1) +REG32(PLL_CLK_OTHER_DMN, 0x20) + FIELD(PLL_CLK_OTHER_DMN, APLL_BYPASS, 0, 1) +REG32(RPLL_CTRL, 0x40) + FIELD(RPLL_CTRL, POST_SRC, 24, 3) + FIELD(RPLL_CTRL, PRE_SRC, 20, 3) + FIELD(RPLL_CTRL, CLKOUTDIV, 16, 2) + FIELD(RPLL_CTRL, FBDIV, 8, 8) + FIELD(RPLL_CTRL, BYPASS, 3, 1) + FIELD(RPLL_CTRL, RESET, 0, 1) +REG32(RPLL_CFG, 0x44) + FIELD(RPLL_CFG, LOCK_DLY, 25, 7) + FIELD(RPLL_CFG, LOCK_CNT, 13, 10) + FIELD(RPLL_CFG, LFHF, 10, 2) + FIELD(RPLL_CFG, CP, 5, 4) + FIELD(RPLL_CFG, RES, 0, 4) +REG32(RPLL_FRAC_CFG, 0x48) + FIELD(RPLL_FRAC_CFG, ENABLED, 31, 1) + FIELD(RPLL_FRAC_CFG, SEED, 22, 3) + FIELD(RPLL_FRAC_CFG, ALGRTHM, 19, 1) + FIELD(RPLL_FRAC_CFG, ORDER, 18, 1) + FIELD(RPLL_FRAC_CFG, DATA, 0, 16) +REG32(PLL_STATUS, 0x50) + FIELD(PLL_STATUS, RPLL_STABLE, 2, 1) + FIELD(PLL_STATUS, RPLL_LOCK, 0, 1) +REG32(RPLL_TO_XPD_CTRL, 0x100) + FIELD(RPLL_TO_XPD_CTRL, CLKACT, 25, 1) + FIELD(RPLL_TO_XPD_CTRL, DIVISOR0, 8, 10) +REG32(LPD_TOP_SWITCH_CTRL, 0x104) + FIELD(LPD_TOP_SWITCH_CTRL, CLKACT_ADMA, 26, 1) + FIELD(LPD_TOP_SWITCH_CTRL, CLKACT, 25, 1) + FIELD(LPD_TOP_SWITCH_CTRL, DIVISOR0, 8, 10) + FIELD(LPD_TOP_SWITCH_CTRL, SRCSEL, 0, 3) +REG32(LPD_LSBUS_CTRL, 0x108) + FIELD(LPD_LSBUS_CTRL, CLKACT, 25, 1) + FIELD(LPD_LSBUS_CTRL, DIVISOR0, 8, 10) + FIELD(LPD_LSBUS_CTRL, SRCSEL, 0, 3) +REG32(CPU_R5_CTRL, 0x10c) + FIELD(CPU_R5_CTRL, CLKACT_OCM2, 28, 1) + FIELD(CPU_R5_CTRL, CLKACT_OCM, 27, 1) + FIELD(CPU_R5_CTRL, CLKACT_CORE, 26, 1) + FIELD(CPU_R5_CTRL, CLKACT, 25, 1) + FIELD(CPU_R5_CTRL, DIVISOR0, 8, 10) + FIELD(CPU_R5_CTRL, SRCSEL, 0, 3) +REG32(IOU_SWITCH_CTRL, 0x114) + FIELD(IOU_SWITCH_CTRL, CLKACT, 25, 1) + FIELD(IOU_SWITCH_CTRL, DIVISOR0, 8, 10) + FIELD(IOU_SWITCH_CTRL, SRCSEL, 0, 3) +REG32(GEM0_REF_CTRL, 0x118) + FIELD(GEM0_REF_CTRL, CLKACT_RX, 27, 1) + FIELD(GEM0_REF_CTRL, CLKACT_TX, 26, 1) + FIELD(GEM0_REF_CTRL, CLKACT, 25, 1) + FIELD(GEM0_REF_CTRL, DIVISOR0, 8, 10) + FIELD(GEM0_REF_CTRL, SRCSEL, 0, 3) +REG32(GEM1_REF_CTRL, 0x11c) + FIELD(GEM1_REF_CTRL, CLKACT_RX, 27, 1) + FIELD(GEM1_REF_CTRL, CLKACT_TX, 26, 1) + FIELD(GEM1_REF_CTRL, CLKACT, 25, 1) + FIELD(GEM1_REF_CTRL, DIVISOR0, 8, 10) + FIELD(GEM1_REF_CTRL, SRCSEL, 0, 3) +REG32(GEM_TSU_REF_CTRL, 0x120) + FIELD(GEM_TSU_REF_CTRL, CLKACT, 25, 1) + FIELD(GEM_TSU_REF_CTRL, DIVISOR0, 8, 10) + FIELD(GEM_TSU_REF_CTRL, SRCSEL, 0, 3) +REG32(USB0_BUS_REF_CTRL, 0x124) + FIELD(USB0_BUS_REF_CTRL, CLKACT, 25, 1) + FIELD(USB0_BUS_REF_CTRL, DIVISOR0, 8, 10) + FIELD(USB0_BUS_REF_CTRL, SRCSEL, 0, 3) +REG32(UART0_REF_CTRL, 0x128) + FIELD(UART0_REF_CTRL, CLKACT, 25, 1) + FIELD(UART0_REF_CTRL, DIVISOR0, 8, 10) + FIELD(UART0_REF_CTRL, SRCSEL, 0, 3) +REG32(UART1_REF_CTRL, 0x12c) + FIELD(UART1_REF_CTRL, CLKACT, 25, 1) + FIELD(UART1_REF_CTRL, DIVISOR0, 8, 10) + FIELD(UART1_REF_CTRL, SRCSEL, 0, 3) +REG32(SPI0_REF_CTRL, 0x130) + FIELD(SPI0_REF_CTRL, CLKACT, 25, 1) + FIELD(SPI0_REF_CTRL, DIVISOR0, 8, 10) + FIELD(SPI0_REF_CTRL, SRCSEL, 0, 3) +REG32(SPI1_REF_CTRL, 0x134) + FIELD(SPI1_REF_CTRL, CLKACT, 25, 1) + FIELD(SPI1_REF_CTRL, DIVISOR0, 8, 10) + FIELD(SPI1_REF_CTRL, SRCSEL, 0, 3) +REG32(CAN0_REF_CTRL, 0x138) + FIELD(CAN0_REF_CTRL, CLKACT, 25, 1) + FIELD(CAN0_REF_CTRL, DIVISOR0, 8, 10) + FIELD(CAN0_REF_CTRL, SRCSEL, 0, 3) +REG32(CAN1_REF_CTRL, 0x13c) + FIELD(CAN1_REF_CTRL, CLKACT, 25, 1) + FIELD(CAN1_REF_CTRL, DIVISOR0, 8, 10) + FIELD(CAN1_REF_CTRL, SRCSEL, 0, 3) +REG32(I2C0_REF_CTRL, 0x140) + FIELD(I2C0_REF_CTRL, CLKACT, 25, 1) + FIELD(I2C0_REF_CTRL, DIVISOR0, 8, 10) + FIELD(I2C0_REF_CTRL, SRCSEL, 0, 3) +REG32(I2C1_REF_CTRL, 0x144) + FIELD(I2C1_REF_CTRL, CLKACT, 25, 1) + FIELD(I2C1_REF_CTRL, DIVISOR0, 8, 10) + FIELD(I2C1_REF_CTRL, SRCSEL, 0, 3) +REG32(DBG_LPD_CTRL, 0x148) + FIELD(DBG_LPD_CTRL, CLKACT, 25, 1) + FIELD(DBG_LPD_CTRL, DIVISOR0, 8, 10) + FIELD(DBG_LPD_CTRL, SRCSEL, 0, 3) +REG32(TIMESTAMP_REF_CTRL, 0x14c) + FIELD(TIMESTAMP_REF_CTRL, CLKACT, 25, 1) + FIELD(TIMESTAMP_REF_CTRL, DIVISOR0, 8, 10) + FIELD(TIMESTAMP_REF_CTRL, SRCSEL, 0, 3) +REG32(CRL_SAFETY_CHK, 0x150) +REG32(PSM_REF_CTRL, 0x154) + FIELD(PSM_REF_CTRL, DIVISOR0, 8, 10) + FIELD(PSM_REF_CTRL, SRCSEL, 0, 3) +REG32(DBG_TSTMP_CTRL, 0x158) + FIELD(DBG_TSTMP_CTRL, CLKACT, 25, 1) + FIELD(DBG_TSTMP_CTRL, DIVISOR0, 8, 10) + FIELD(DBG_TSTMP_CTRL, SRCSEL, 0, 3) +REG32(CPM_TOPSW_REF_CTRL, 0x15c) + FIELD(CPM_TOPSW_REF_CTRL, CLKACT, 25, 1) + FIELD(CPM_TOPSW_REF_CTRL, DIVISOR0, 8, 10) + FIELD(CPM_TOPSW_REF_CTRL, SRCSEL, 0, 3) +REG32(USB3_DUAL_REF_CTRL, 0x160) + FIELD(USB3_DUAL_REF_CTRL, CLKACT, 25, 1) + FIELD(USB3_DUAL_REF_CTRL, DIVISOR0, 8, 10) + FIELD(USB3_DUAL_REF_CTRL, SRCSEL, 0, 3) +REG32(RST_CPU_R5, 0x300) + FIELD(RST_CPU_R5, RESET_PGE, 4, 1) + FIELD(RST_CPU_R5, RESET_AMBA, 2, 1) + FIELD(RST_CPU_R5, RESET_CPU1, 1, 1) + FIELD(RST_CPU_R5, RESET_CPU0, 0, 1) +REG32(RST_ADMA, 0x304) + FIELD(RST_ADMA, RESET, 0, 1) +REG32(RST_GEM0, 0x308) + FIELD(RST_GEM0, RESET, 0, 1) +REG32(RST_GEM1, 0x30c) + FIELD(RST_GEM1, RESET, 0, 1) +REG32(RST_SPARE, 0x310) + FIELD(RST_SPARE, RESET, 0, 1) +REG32(RST_USB0, 0x314) + FIELD(RST_USB0, RESET, 0, 1) +REG32(RST_UART0, 0x318) + FIELD(RST_UART0, RESET, 0, 1) +REG32(RST_UART1, 0x31c) + FIELD(RST_UART1, RESET, 0, 1) +REG32(RST_SPI0, 0x320) + FIELD(RST_SPI0, RESET, 0, 1) +REG32(RST_SPI1, 0x324) + FIELD(RST_SPI1, RESET, 0, 1) +REG32(RST_CAN0, 0x328) + FIELD(RST_CAN0, RESET, 0, 1) +REG32(RST_CAN1, 0x32c) + FIELD(RST_CAN1, RESET, 0, 1) +REG32(RST_I2C0, 0x330) + FIELD(RST_I2C0, RESET, 0, 1) +REG32(RST_I2C1, 0x334) + FIELD(RST_I2C1, RESET, 0, 1) +REG32(RST_DBG_LPD, 0x338) + FIELD(RST_DBG_LPD, RPU_DBG1_RESET, 5, 1) + FIELD(RST_DBG_LPD, RPU_DBG0_RESET, 4, 1) + FIELD(RST_DBG_LPD, RESET_HSDP, 1, 1) + FIELD(RST_DBG_LPD, RESET, 0, 1) +REG32(RST_GPIO, 0x33c) + FIELD(RST_GPIO, RESET, 0, 1) +REG32(RST_TTC, 0x344) + FIELD(RST_TTC, TTC3_RESET, 3, 1) + FIELD(RST_TTC, TTC2_RESET, 2, 1) + FIELD(RST_TTC, TTC1_RESET, 1, 1) + FIELD(RST_TTC, TTC0_RESET, 0, 1) +REG32(RST_TIMESTAMP, 0x348) + FIELD(RST_TIMESTAMP, RESET, 0, 1) +REG32(RST_SWDT, 0x34c) + FIELD(RST_SWDT, RESET, 0, 1) +REG32(RST_OCM, 0x350) + FIELD(RST_OCM, RESET, 0, 1) +REG32(RST_IPI, 0x354) + FIELD(RST_IPI, RESET, 0, 1) +REG32(RST_SYSMON, 0x358) + FIELD(RST_SYSMON, SEQ_RST, 1, 1) + FIELD(RST_SYSMON, CFG_RST, 0, 1) +REG32(RST_FPD, 0x360) + FIELD(RST_FPD, SRST, 1, 1) + FIELD(RST_FPD, POR, 0, 1) +REG32(PSM_RST_MODE, 0x370) + FIELD(PSM_RST_MODE, WAKEUP, 2, 1) + FIELD(PSM_RST_MODE, RST_MODE, 0, 2) + +#define CRL_R_MAX (R_PSM_RST_MODE + 1) + +#define RPU_MAX_CPU 2 + +struct XlnxVersalCRL { + SysBusDevice parent_obj; + qemu_irq irq; + + struct { + ARMCPU *cpu_r5[RPU_MAX_CPU]; + DeviceState *adma[8]; + DeviceState *uart[2]; + DeviceState *gem[2]; + DeviceState *usb; + } cfg; + + RegisterInfoArray *reg_array; + uint32_t regs[CRL_R_MAX]; + RegisterInfo regs_info[CRL_R_MAX]; +}; +#endif diff --git a/include/hw/timer/cadence_ttc.h b/include/hw/timer/cadence_ttc.h new file mode 100644 index 0000000000..e1251383f2 --- /dev/null +++ b/include/hw/timer/cadence_ttc.h @@ -0,0 +1,54 @@ +/* + * Xilinx Zynq cadence TTC model + * + * Copyright (c) 2011 Xilinx Inc. + * Copyright (c) 2012 Peter A.G. Crosthwaite (peter.crosthwaite@petalogix.com) + * Copyright (c) 2012 PetaLogix Pty Ltd. + * Written By Haibing Ma + * M. Habib + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, see <http://www.gnu.org/licenses/>. + */ +#ifndef HW_TIMER_CADENCE_TTC_H +#define HW_TIMER_CADENCE_TTC_H + +#include "hw/sysbus.h" +#include "qemu/timer.h" + +typedef struct { + QEMUTimer *timer; + int freq; + + uint32_t reg_clock; + uint32_t reg_count; + uint32_t reg_value; + uint16_t reg_interval; + uint16_t reg_match[3]; + uint32_t reg_intr; + uint32_t reg_intr_en; + uint32_t reg_event_ctrl; + uint32_t reg_event; + + uint64_t cpu_time; + unsigned int cpu_time_valid; + + qemu_irq irq; +} CadenceTimerState; + +#define TYPE_CADENCE_TTC "cadence_ttc" +OBJECT_DECLARE_SIMPLE_TYPE(CadenceTTCState, CADENCE_TTC) + +struct CadenceTTCState { + SysBusDevice parent_obj; + + MemoryRegion iomem; + CadenceTimerState timer[3]; +}; + +#endif |