diff options
Diffstat (limited to 'tests')
| -rw-r--r-- | tests/qtest/cmsdk-apb-watchdog-test.c | 328 | ||||
| -rw-r--r-- | tests/qtest/meson.build | 3 |
2 files changed, 300 insertions, 31 deletions
diff --git a/tests/qtest/cmsdk-apb-watchdog-test.c b/tests/qtest/cmsdk-apb-watchdog-test.c index 00b5dbbc81..53538f98c9 100644 --- a/tests/qtest/cmsdk-apb-watchdog-test.c +++ b/tests/qtest/cmsdk-apb-watchdog-test.c @@ -15,14 +15,12 @@ */ #include "qemu/osdep.h" +#include "exec/hwaddr.h" #include "qemu/bitops.h" #include "libqtest-single.h" -/* - * lm3s811evb watchdog; at board startup this runs at 200MHz / 16 == 12.5MHz, - * which is 80ns per tick. - */ #define WDOG_BASE 0x40000000 +#define WDOG_BASE_MPS2 0x40008000 #define WDOGLOAD 0 #define WDOGVALUE 4 @@ -37,39 +35,97 @@ #define SYSDIV_SHIFT 23 #define SYSDIV_LENGTH 4 -static void test_watchdog(void) +#define WDOGLOAD_DEFAULT 0xFFFFFFFF +#define WDOGVALUE_DEFAULT 0xFFFFFFFF + +typedef struct CMSDKAPBWatchdogTestArgs { + int64_t tick; + hwaddr wdog_base; + const char *machine; +} CMSDKAPBWatchdogTestArgs; + +enum { + MACHINE_LM3S811EVB, + MACHINE_MPS2_AN385, +}; + +/* + * lm3s811evb watchdog; at board startup this runs at 200MHz / 16 == 12.5MHz, + * which is 80ns per tick. + * + * IoTKit/ARMSSE dualtimer; driven at 25MHz in mps2-an385, so 40ns per tick + */ +static const CMSDKAPBWatchdogTestArgs machine_info[] = { + [MACHINE_LM3S811EVB] = { + .tick = 80, + .wdog_base = WDOG_BASE, + .machine = "lm3s811evb", + }, + [MACHINE_MPS2_AN385] = { + .tick = 40, + .wdog_base = WDOG_BASE_MPS2, + .machine = "mps2-an385", + }, +}; + +static void system_reset(QTestState *qtest) { - g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 0); + QDict *resp; - writel(WDOG_BASE + WDOGCONTROL, 1); - writel(WDOG_BASE + WDOGLOAD, 1000); + resp = qtest_qmp(qtest, "{'execute': 'system_reset'}"); + g_assert(qdict_haskey(resp, "return")); + qobject_unref(resp); + qtest_qmp_eventwait(qtest, "RESET"); +} + +static void test_watchdog(const void *ptr) +{ + const CMSDKAPBWatchdogTestArgs *args = ptr; + hwaddr wdog_base = args->wdog_base; + int64_t tick = args->tick; + g_autofree gchar *cmdline = g_strdup_printf("-machine %s", args->machine); + qtest_start(cmdline); + + g_assert_cmpuint(readl(wdog_base + WDOGRIS), ==, 0); + + writel(wdog_base + WDOGCONTROL, 1); + writel(wdog_base + WDOGLOAD, 1000); /* Step to just past the 500th tick */ - clock_step(500 * 80 + 1); - g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 0); - g_assert_cmpuint(readl(WDOG_BASE + WDOGVALUE), ==, 500); + clock_step(500 * tick + 1); + g_assert_cmpuint(readl(wdog_base + WDOGRIS), ==, 0); + g_assert_cmpuint(readl(wdog_base + WDOGVALUE), ==, 500); /* Just past the 1000th tick: timer should have fired */ - clock_step(500 * 80); - g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 1); - g_assert_cmpuint(readl(WDOG_BASE + WDOGVALUE), ==, 0); + clock_step(500 * tick); + g_assert_cmpuint(readl(wdog_base + WDOGRIS), ==, 1); + g_assert_cmpuint(readl(wdog_base + WDOGVALUE), ==, 0); /* VALUE reloads at following tick */ - clock_step(80); - g_assert_cmpuint(readl(WDOG_BASE + WDOGVALUE), ==, 1000); + clock_step(tick); + g_assert_cmpuint(readl(wdog_base + WDOGVALUE), ==, 1000); /* Writing any value to WDOGINTCLR clears the interrupt and reloads */ - clock_step(500 * 80); - g_assert_cmpuint(readl(WDOG_BASE + WDOGVALUE), ==, 500); - g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 1); - writel(WDOG_BASE + WDOGINTCLR, 0); - g_assert_cmpuint(readl(WDOG_BASE + WDOGVALUE), ==, 1000); - g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 0); + clock_step(500 * tick); + g_assert_cmpuint(readl(wdog_base + WDOGVALUE), ==, 500); + g_assert_cmpuint(readl(wdog_base + WDOGRIS), ==, 1); + writel(wdog_base + WDOGINTCLR, 0); + g_assert_cmpuint(readl(wdog_base + WDOGVALUE), ==, 1000); + g_assert_cmpuint(readl(wdog_base + WDOGRIS), ==, 0); + + qtest_end(); } -static void test_clock_change(void) +/* + * This test can only be executed in the stellaris board since it relies on a + * component of the board to change the clocking parameters of the watchdog. + */ +static void test_clock_change(const void *ptr) { uint32_t rcc; + const CMSDKAPBWatchdogTestArgs *args = ptr; + g_autofree gchar *cmdline = g_strdup_printf("-machine %s", args->machine); + qtest_start(cmdline); /* * Test that writing to the stellaris board's RCC register to @@ -109,6 +165,201 @@ static void test_clock_change(void) writel(WDOG_BASE + WDOGINTCLR, 0); g_assert_cmpuint(readl(WDOG_BASE + WDOGVALUE), ==, 1000); g_assert_cmpuint(readl(WDOG_BASE + WDOGRIS), ==, 0); + + qtest_end(); +} + +/* Tests the counter is not running after reset. */ +static void test_watchdog_reset(const void *ptr) +{ + const CMSDKAPBWatchdogTestArgs *args = ptr; + hwaddr wdog_base = args->wdog_base; + int64_t tick = args->tick; + g_autofree gchar *cmdline = g_strdup_printf("-machine %s", args->machine); + qtest_start(cmdline); + g_assert_cmpuint(readl(wdog_base + WDOGRIS), ==, 0); + + g_assert_cmphex(readl(wdog_base + WDOGLOAD), ==, WDOGLOAD_DEFAULT); + g_assert_cmphex(readl(wdog_base + WDOGVALUE), ==, WDOGVALUE_DEFAULT); + + g_assert_cmphex(readl(wdog_base + WDOGCONTROL), ==, 0); + + /* + * The counter should not be running if WDOGCONTROL.INTEN has not been set, + * as it is the case after a cold reset. + */ + clock_step(15 * tick + 1); + g_assert_cmphex(readl(wdog_base + WDOGLOAD), ==, WDOGLOAD_DEFAULT); + g_assert_cmphex(readl(wdog_base + WDOGVALUE), ==, WDOGVALUE_DEFAULT); + + /* Let the counter run before reset */ + writel(wdog_base + WDOGLOAD, 3000); + writel(wdog_base + WDOGCONTROL, 1); + + /* Verify it is running */ + clock_step(1000 * tick + 1); + g_assert_cmpuint(readl(wdog_base + WDOGLOAD), ==, 3000); + g_assert_cmpuint(readl(wdog_base + WDOGVALUE), ==, 2000); + + system_reset(global_qtest); + + /* Check defaults after reset */ + g_assert_cmphex(readl(wdog_base + WDOGLOAD), ==, WDOGLOAD_DEFAULT); + g_assert_cmphex(readl(wdog_base + WDOGVALUE), ==, WDOGVALUE_DEFAULT); + + /* The counter should not be running after reset. */ + clock_step(1000 * tick + 1); + g_assert_cmphex(readl(wdog_base + WDOGLOAD), ==, WDOGLOAD_DEFAULT); + g_assert_cmphex(readl(wdog_base + WDOGVALUE), ==, WDOGVALUE_DEFAULT); + + qtest_end(); +} + +/* + * Tests inten works as the counter enable based on this description: + * + * Enable the interrupt event, WDOGINT. Set HIGH to enable the counter and the + * interrupt, or LOW to disable the counter and interrupt. Reloads the counter + * from the value in WDOGLOAD when the interrupt is enabled, after previously + * being disabled. + */ +static void test_watchdog_inten(const void *ptr) +{ + const CMSDKAPBWatchdogTestArgs *args = ptr; + hwaddr wdog_base = args->wdog_base; + int64_t tick = args->tick; + g_autofree gchar *cmdline = g_strdup_printf("-machine %s", args->machine); + qtest_start(cmdline); + g_assert_cmpuint(readl(wdog_base + WDOGRIS), ==, 0); + + g_assert_cmphex(readl(wdog_base + WDOGLOAD), ==, WDOGLOAD_DEFAULT); + g_assert_cmphex(readl(wdog_base + WDOGVALUE), ==, WDOGVALUE_DEFAULT); + + /* + * When WDOGLOAD is written to, the count is immediately restarted from the + * new value. + * + * Note: the counter should not be running as long as WDOGCONTROL.INTEN is + * not set + */ + writel(wdog_base + WDOGLOAD, 4000); + g_assert_cmpuint(readl(wdog_base + WDOGLOAD), ==, 4000); + g_assert_cmpuint(readl(wdog_base + WDOGVALUE), ==, 4000); + clock_step(500 * tick + 1); + g_assert_cmpuint(readl(wdog_base + WDOGLOAD), ==, 4000); + g_assert_cmpuint(readl(wdog_base + WDOGVALUE), ==, 4000); + + /* Set HIGH WDOGCONTROL.INTEN to enable the counter and the interrupt */ + writel(wdog_base + WDOGCONTROL, 1); + clock_step(500 * tick + 1); + g_assert_cmpuint(readl(wdog_base + WDOGLOAD), ==, 4000); + g_assert_cmpuint(readl(wdog_base + WDOGVALUE), ==, 3500); + + /* or LOW to disable the counter and interrupt. */ + writel(wdog_base + WDOGCONTROL, 0); + clock_step(100 * tick); + g_assert_cmpuint(readl(wdog_base + WDOGLOAD), ==, 4000); + g_assert_cmpuint(readl(wdog_base + WDOGVALUE), ==, 3500); + + /* + * Reloads the counter from the value in WDOGLOAD when the interrupt is + * enabled, after previously being disabled. + */ + writel(wdog_base + WDOGCONTROL, 1); + g_assert_cmpuint(readl(wdog_base + WDOGLOAD), ==, 4000); + g_assert_cmpuint(readl(wdog_base + WDOGVALUE), ==, 4000); + + /* Test counter is still on */ + clock_step(50 * tick + 1); + g_assert_cmpuint(readl(wdog_base + WDOGLOAD), ==, 4000); + g_assert_cmpuint(readl(wdog_base + WDOGVALUE), ==, 3950); + + /* + * When WDOGLOAD is written to, the count is immediately restarted from the + * new value. + * + * Note: the counter should be running since WDOGCONTROL.INTEN is set + */ + writel(wdog_base + WDOGLOAD, 5000); + g_assert_cmpuint(readl(wdog_base + WDOGLOAD), ==, 5000); + g_assert_cmpuint(readl(wdog_base + WDOGVALUE), ==, 5000); + clock_step(4999 * tick + 1); + g_assert_cmpuint(readl(wdog_base + WDOGLOAD), ==, 5000); + g_assert_cmpuint(readl(wdog_base + WDOGVALUE), ==, 1); + g_assert_cmpuint(readl(wdog_base + WDOGRIS), ==, 0); + + /* Finally disable and check the conditions don't change */ + writel(wdog_base + WDOGCONTROL, 0); + clock_step(10 * tick); + g_assert_cmpuint(readl(wdog_base + WDOGLOAD), ==, 5000); + g_assert_cmpuint(readl(wdog_base + WDOGVALUE), ==, 1); + g_assert_cmpuint(readl(wdog_base + WDOGRIS), ==, 0); + + qtest_end(); +} + +/* + * Tests the following custom behavior: + * + * The Luminary version of this device ignores writes to this register after the + * guest has enabled interrupts (so they can only be disabled again via reset). + */ +static void test_watchdog_inten_luminary(const void *ptr) +{ + const CMSDKAPBWatchdogTestArgs *args = ptr; + hwaddr wdog_base = args->wdog_base; + int64_t tick = args->tick; + g_autofree gchar *cmdline = g_strdup_printf("-machine %s", args->machine); + qtest_start(cmdline); + g_assert_cmpuint(readl(wdog_base + WDOGRIS), ==, 0); + + g_assert_cmphex(readl(wdog_base + WDOGLOAD), ==, WDOGLOAD_DEFAULT); + g_assert_cmphex(readl(wdog_base + WDOGVALUE), ==, WDOGVALUE_DEFAULT); + + /* + * When WDOGLOAD is written to, the count is immediately restarted from the + * new value. + * + * Note: the counter should not be running as long as WDOGCONTROL.INTEN is + * not set + */ + writel(wdog_base + WDOGLOAD, 4000); + g_assert_cmpuint(readl(wdog_base + WDOGLOAD), ==, 4000); + g_assert_cmpuint(readl(wdog_base + WDOGVALUE), ==, 4000); + clock_step(500 * tick + 1); + g_assert_cmpuint(readl(wdog_base + WDOGLOAD), ==, 4000); + g_assert_cmpuint(readl(wdog_base + WDOGVALUE), ==, 4000); + + /* Set HIGH WDOGCONTROL.INTEN to enable the counter and the interrupt */ + writel(wdog_base + WDOGCONTROL, 1); + clock_step(500 * tick + 1); + g_assert_cmpuint(readl(wdog_base + WDOGLOAD), ==, 4000); + g_assert_cmpuint(readl(wdog_base + WDOGVALUE), ==, 3500); + + /* + * The Luminary version of this device ignores writes to this register after + * the guest has enabled interrupts + */ + writel(wdog_base + WDOGCONTROL, 0); + clock_step(100 * tick); + g_assert_cmpuint(readl(wdog_base + WDOGLOAD), ==, 4000); + g_assert_cmpuint(readl(wdog_base + WDOGVALUE), ==, 3400); + g_assert_cmphex(readl(wdog_base + WDOGCONTROL), ==, 0x1); + + /* They can only be disabled again via reset */ + system_reset(global_qtest); + + /* Check defaults after reset */ + g_assert_cmphex(readl(wdog_base + WDOGLOAD), ==, WDOGLOAD_DEFAULT); + g_assert_cmphex(readl(wdog_base + WDOGVALUE), ==, WDOGVALUE_DEFAULT); + g_assert_cmphex(readl(wdog_base + WDOGCONTROL), ==, 0); + + /* The counter should not be running after reset. */ + clock_step(1000 * tick + 1); + g_assert_cmphex(readl(wdog_base + WDOGLOAD), ==, WDOGLOAD_DEFAULT); + g_assert_cmphex(readl(wdog_base + WDOGVALUE), ==, WDOGVALUE_DEFAULT); + + qtest_end(); } int main(int argc, char **argv) @@ -116,16 +367,33 @@ int main(int argc, char **argv) int r; g_test_init(&argc, &argv, NULL); + g_test_set_nonfatal_assertions(); - qtest_start("-machine lm3s811evb"); - - qtest_add_func("/cmsdk-apb-watchdog/watchdog", test_watchdog); - qtest_add_func("/cmsdk-apb-watchdog/watchdog_clock_change", - test_clock_change); + if (qtest_has_machine(machine_info[MACHINE_LM3S811EVB].machine)) { + qtest_add_data_func("/cmsdk-apb-watchdog/watchdog", + &machine_info[MACHINE_LM3S811EVB], test_watchdog); + qtest_add_data_func("/cmsdk-apb-watchdog/watchdog_clock_change", + &machine_info[MACHINE_LM3S811EVB], + test_clock_change); + qtest_add_data_func("/cmsdk-apb-watchdog/watchdog_reset", + &machine_info[MACHINE_LM3S811EVB], + test_watchdog_reset); + qtest_add_data_func("/cmsdk-apb-watchdog/watchdog_inten_luminary", + &machine_info[MACHINE_LM3S811EVB], + test_watchdog_inten_luminary); + } + if (qtest_has_machine(machine_info[MACHINE_MPS2_AN385].machine)) { + qtest_add_data_func("/cmsdk-apb-watchdog/watchdog_mps2", + &machine_info[MACHINE_MPS2_AN385], test_watchdog); + qtest_add_data_func("/cmsdk-apb-watchdog/watchdog_reset_mps2", + &machine_info[MACHINE_MPS2_AN385], + test_watchdog_reset); + qtest_add_data_func("/cmsdk-apb-watchdog/watchdog_inten", + &machine_info[MACHINE_MPS2_AN385], + test_watchdog_inten); + } r = g_test_run(); - qtest_end(); - return r; } diff --git a/tests/qtest/meson.build b/tests/qtest/meson.build index aa93e98418..f2f35367ae 100644 --- a/tests/qtest/meson.build +++ b/tests/qtest/meson.build @@ -227,7 +227,8 @@ qtests_arm = \ (config_all_devices.has_key('CONFIG_MPS2') ? ['sse-timer-test'] : []) + \ (config_all_devices.has_key('CONFIG_CMSDK_APB_DUALTIMER') ? ['cmsdk-apb-dualtimer-test'] : []) + \ (config_all_devices.has_key('CONFIG_CMSDK_APB_TIMER') ? ['cmsdk-apb-timer-test'] : []) + \ - (config_all_devices.has_key('CONFIG_CMSDK_APB_WATCHDOG') ? ['cmsdk-apb-watchdog-test'] : []) + \ + (config_all_devices.has_key('CONFIG_STELLARIS') or + config_all_devices.has_key('CONFIG_MPS2') ? ['cmsdk-apb-watchdog-test'] : []) + \ (config_all_devices.has_key('CONFIG_PFLASH_CFI02') and config_all_devices.has_key('CONFIG_MUSICPAL') ? ['pflash-cfi02-test'] : []) + \ (config_all_devices.has_key('CONFIG_ASPEED_SOC') ? qtests_aspeed : []) + \ |