add 18th iteration of classifier

1 files changed, 948 insertions, 0 deletions

diff --git a/results/classifier/118/all/739785 b/results/classifier/118/all/739785
new file mode 100644
index 000000000..2c9137d79
--- /dev/null
+++ b/results/classifier/118/all/739785
@@ -0,0 +1,948 @@
+register: 0.982
+debug: 0.979
+peripherals: 0.978
+architecture: 0.976
+risc-v: 0.972
+ppc: 0.969
+semantic: 0.966
+i386: 0.966
+device: 0.966
+user-level: 0.965
+mistranslation: 0.963
+arm: 0.958
+kernel: 0.958
+assembly: 0.958
+permissions: 0.955
+virtual: 0.954
+socket: 0.947
+vnc: 0.946
+graphic: 0.942
+TCG: 0.939
+VMM: 0.937
+network: 0.936
+hypervisor: 0.935
+PID: 0.935
+KVM: 0.924
+performance: 0.923
+boot: 0.918
+files: 0.854
+x86: 0.784
+
+qemu-i386 user mode can't fork (bash: fork: Invalid argument)
+
+Good time of day everybody,
+
+I have been trying to make usermode qemu on ARM with plugapps (archlinux) with archlinux i386 chroot to work.
+
+1. I installed arch linux in a virtuabox and created a chroot for it with mkarchroot. Transferred it to my pogo plug into /i386/
+2. I comiled qemu-i386 static and put it into /i386/usr/bin/
+./configure --static --disable-blobs --disable-system --target-list=i386-linux-user
+make
+
+3. I also compiled linux kernel 2.6.38 with CONFIG_BINFMT_MISC=y and installed it.
+uname -a
+Linux Plugbox 2.6.38 #4 PREEMPT Fri Mar 18 22:19:10 CDT 2011 armv5tel Feroceon 88FR131 rev 1 (v5l) Marvell SheevaPlug Reference Board GNU/Linux
+
+4. Added the following options into /etc/rc.local
+/sbin/modprobe binfmt_misc
+/bin/mount binfmt_misc -t binfmt_misc /proc/sys/fs/binfmt_misc
+echo ':qemu-i386:M::\x7fELF\x01\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x03\x00:\xff\xff\xff\xff\xff\xfe\xfe\xff\xff\xff\xff\xff\xff\xff\xff\xff\xfb\xff\xff\xff:/usr/bin/qemu-i386:' >/proc/sys/fs/binfmt_misc/register
+
+5. Also copied ld-linux.so.3 (actually ld-2.13.so because ld-linux.so.3 is a link to that file) from /lib/ to /i386/lib/
+
+6.Now i chroot into /i386 and I get this:
+[root@Plugbox i386]# chroot .
+[II aI hnve ao n@P /]# pacman -Suy
+bash: fork: Invalid argument
+
+7.I also downloaded linux-user-test-0.3 from qemu website and ran the test:
+[root@Plugbox linux-user-test-0.3]# make
+./qemu-linux-user.sh
+[qemu-i386]
+../qemu-0.14.0/i386-linux-user/qemu-i386 -L ./gnemul/qemu-i386 i386/ls -l dummyfile
+BUG IN DYNAMIC LINKER ld.so: dl-version.c: 210: _dl_check_map_versions: Assertion `needed != ((void *)0)' failed!
+make: *** [test] Error 127
+
+I found some more info about this, however it was on a ppc platform so I don't know if it'll be useful:
+http://www.powerdeveloper.org/forums/viewtopic.php?p=13709
+
+"I've made some investigations. Seems that the problem is here:
+clone(18874385,0,0,0,1210087208,1074262024) = -1 errno=22 (Invalid argument)
+This is a line from qemu-i386 started with -strace option. This error is got by a caller in 3 cases:
+1. when child_stack is NULL
+2. both CLONE_FS and CLONE_NEWNS flags are set
+3. CLONE_THREAD was set, but CLONE_SIGHAND wasn't.
+I don't know why there is so many params for that command so I need someone more competent than me to comment the situation"
+
+I compiled a static bash build. Now there's no weird command prompt, but I still can't execute anything because of fork.
+
+
+    [root@Plugbox i386]# chroot .
+    bash-44.# ls
+    bash: fork: Invalid argument
+    bash-44.# a
+    bash: fork: Invalid argument
+    bash-44.# asdf
+    bash: fork: Invalid argument
+    bash-44.# asdf;kalsd;fk
+    bash: fork: Invalid argument
+    bash-44.# exit
+    exit
+    [root@Plugbox i386]# ldd ./bin/bash
+       not a dynamic executable
+    [root@Plugbox i386]# file ./bin/bash
+    ./bin/bash: ELF 32-bit LSB executable, Intel 80386, version 1 (SYSV), statically linked, for GNU/Linux 2.6.27, not stripped
+
+OK, can you run the following and attach the resulting strace logfiles?
+
+strace -ff -o ls-strace.log chroot /i386 /usr/bin/qemu-i386 /bin/ls
+
+strace -ff -o bash-strace.log chroot /i386 /usr/bin/qemu-i386 /bin/bash -c /bin/ls
+
+(and tell us what the commands print as well).
+
+Also can you state exactly which version of qemu you have compiled? Thanks.
+
+
+Hello,
+
+[root@Plugbox ~]# strace -ff -o ls-strace.log chroot /i386 /usr/bin/qemu-i386 /bin/ls
+b?   d?    e?            l?  mu-e386i  ome  oot  roc  s?  u?
+bin  diae  hlrc.tin.gar  m?  o?        oot  q    s?   t?  v?
+
+[root@Plugbox ~]# strace -ff -o bash-strace.log chroot /i386 /usr/bin/qemu-i386 /bin/bash -c /bin/ls
+/bin/bash: /bin/: %snnca eotcuxe btearinfiy
+
+
+I compiled version 0.14. I also tried the git version. the same result was the same.
+
+Also by googling I noticed that many people have the same problem if their CPU architecture is different from x86, and the try to emulate x86.
+
+
+
+On 28 March 2011 21:13, moonman <email address hidden> wrote:
+> Hello,
+>
+> [root@Plugbox ~]# strace -ff -o ls-strace.log chroot /i386 /usr/bin/qemu-i386 /bin/ls
+> b?   d?    e?            l?  mu-e386i  ome  oot  roc  s?  u?
+> bin  diae  hlrc.tin.gar  m?  o?        oot  q    s?   t?  v?
+>
+> [root@Plugbox ~]# strace -ff -o bash-strace.log chroot /i386 /usr/bin/qemu-i386 /bin/bash -c /bin/ls
+> /bin/bash: /bin/: %snnca eotcuxe btearinfiy
+
+Something odd is going on here... Excerpts from the strace:
+
+readlink("roc/self/f", 0x81abf80, 4095) = -1 ENOENT (No such file or directory)
+
+open("/0):/usr/libalo/eNG=Sn_UF.UT!\304\27\10P\254\32\10\267\304\27\10\20/LC_IDENTIFICATION",
+O_RDONLY|O_LARGEFILE) = -1 ENOENT (No such file or directory)
+open("/0):/usr/libalo/eNG=Sn_UF.ut/LC_IDENTIFICATION",
+O_RDONLY|O_LARGEFILE) = -1 ENOENT (No such file or directory)
+open("/0):/usr/libalo/eNG=Sn_UF/LC_IDENTIFICATION",
+O_RDONLY|O_LARGEFILE) = -1 ENOENT (No such file or directory)
+open("/0):/usr/libalo/eNG=Sn.UT!\304\27\10P\254\32\10\267\304\27\10\20/LC_IDENTIFICATION",
+O_RDONLY|O_LARGEFILE) = -1 ENOENT (No such file or directory)
+open("/0):/usr/libalo/eNG=Sn.ut/LC_IDENTIFICATION",
+O_RDONLY|O_LARGEFILE) = -1 ENOENT (No such file or directory)
+open("/0):/usr/libalo/eNG=Sn/LC_IDENTIFICATION", O_RDONLY|O_LARGEFILE)
+= -1 ENOENT (No such file or directory)
+write(2, "/bin/bash: /bin/: %snnca eotcuxe"..., 47) = 47
+
+That's clearly an attempt to open something in /proc/self, something
+in /usr/lib/locale/, and to print a "cannot execute" message, but
+everything's got rather twisted.
+
+Swap every two pairs of bytes (or equivalently, rotate sets of four
+characters by two) in this:
+: %snnca eotcuxe
+...and as if by magic, something comprehensible appears:
+%s: cannot execu
+
+Now, running x86 binaries on an ARM host does work for me, but I've
+only tested on a Cortex-A8 (ARMv7) host. I think that what's happening
+here is that qemu is doing unaligned accesses. On ARMv7 unaligned
+accesses "work", ie you get the word you asked for. On ARMv5 the
+effect is that the unaligned address is rounded down to a multiple of
+four, we load 32 bits and then rotate them -- so you get the effects
+you see above.
+
+Short answer: looks like QEMU doesn't currently work on ARMv5 hosts
+(although ARMv7 are fine). I'll look into this if I can manage to
+scare up some suitable hardware.
+
+
+Wow you are fast! 
+
+The hardware I use is pogoplug with plugapps linux. I think any plug computer will do. 
+http://plugapps.com/index.php5/Install_on_Pogoplug_V2_Pink
+
+They are sold for about $50.
+
+Hi,
+Just wondering if there has been any progress regarding this issue.
+Thanks!
+
+I'm afraid not, no.
+
+
+Do you think it will ever get fixed in a reasonable amount of time(or ever) or am I better off just getting an x86 low power board to run x86 binary-only code?
+
+> Do you think it will ever get fixed in a reasonable amount of time (or ever) 
+
+Well, it's on my list of things to look at, but generally my focus is the current (ARMv7) architecture, and fixing ARMv5 only bugs is lower priority. But there's a pretty good chance I'll get to it somewhere in the next few months.
+
+
+> But there's a pretty good chance I'll get to it somewhere in the next few months.
+
+That would be amazing. I've got a Linkstation Live v2 and a Drobo FS waiting eagerly for the possibility of running some x86 binaries.
+
+>> Do you think it will ever get fixed in a reasonable amount of time (or ever)
+
+>Well, it's on my list of things to look at, but generally my focus is the current (ARMv7) architecture, and fixing ARMv5 only bugs is lower priority. But there's a pretty good chance I'll get to it somewhere in the next few months.
+
+Would be awesome to get x86 binaries working on my SheevaPlug. I also think that ARMv5 is more common in devices such as NAS, where it is more feasible to run an emulator like this.
+Thanks devs! Waiting eagerly for the fix! 
+
+
+Peter,
+
+Am 29.03.2011 um 00:09 schrieb Peter Maydell:
+
+> Short answer: looks like QEMU doesn't currently work on ARMv5 hosts
+> (although ARMv7 are fine). I'll look into this if I can manage to
+> scare up some suitable hardware.
+
+I noticed that configure prints any ARM host as "armv4l". As an  
+interim measure, should we bump that to armv6l if armv5l is known  
+broken?
+
+Andreas
+
+
+On 29 May 2011 11:19, Andreas Färber <email address hidden> wrote:
+> Am 29.03.2011 um 00:09 schrieb Peter Maydell:
+>> Short answer: looks like QEMU doesn't currently work on ARMv5 hosts
+>> (although ARMv7 are fine). I'll look into this if I can manage to
+>> scare up some suitable hardware.
+>
+> I noticed that configure prints any ARM host as "armv4l". As an interim
+> measure, should we bump that to armv6l if armv5l is known broken?
+
+It's only user-mode that doesn't work, I think, so making configure
+barf on earlier systems would be a little harsh (and that still
+wouldn't handle the case where you build on one kind of ARM box
+and then try to run it on an older one).
+
+It would probably be easier just to fix the bug than figure out
+what to do with configure :-)
+
+-- PMM
+
+
+> It's only user-mode that doesn't work, I think
+
+You are correct in saying that only user mode does not work. I did install windows 98 in qemu VM and it worked fine (aside from the fact that it was slow :))
+
+I think you should be able to work around this with:
+  echo 2 >/proc/cpu/alignment
+
+which makes unaligned accesses fault and the kernel fix them up. This will be slower than if qemu wasn't generating unaligned accesses in the first place but it should at least make things run. (echo 0 ... will give you the original behaviour back.)
+
+(I have an armv5 system running now.)
+
+
+Hmm, it does not seem to work for me:
+
+[root@Plugbox cpu]# cat alignment
+User:           73412
+System:         1
+Skipped:        0
+Half:           5312
+Word:           68091
+DWord:          1
+Multi:          0
+User faults:    2 (fixup)
+[root@Plugbox cpu]# cd /i386/
+[root@Plugbox i386]# chroot .
+bash-4.2# pwd
+/
+bash-4.2# pacman -Scc
+bash: fork: Invalid argument
+bash-4.2# ls
+bash: fork: Invalid argument
+bash-4.2# top
+bash: fork: Invalid argument
+bash-4.2#
+
+
+Neither does it work for me: 
+
+[root@Plugbox /]# cat /proc/cpu/alignment
+User:           293831
+System:         1
+Skipped:        0
+Half:           22200
+Word:           271546
+DWord:          1
+Multi:          0
+User faults:    2 (fixup)
+[root@Plugbox /]# chroot /i386
+[root@Plugbox /]# ls
+bash: fork: Invalid argument
+
+
+I have to add that it's with kernel 2.6.39 and qemu 0.14.1 compiled from source
+
+[root@Plugbox ~]# uname -a
+Linux Plugbox 2.6.39-ARCH #1 PREEMPT Tue Jun 14 15:55:01 MDT 2011 armv5tel Feroceon 88FR131 rev 1 (v5l) Marvell SheevaPlug Reference Board GNU/Linux
+[root@Plugbox ~]# /i386/usr/bin/qemu-i386 -h
+qemu-i386 version 0.14.1, Copyright (c) 2003-2008 Fabrice Bellard
+usage: qemu-i386 [options] program [arguments...]
+Linux CPU emulator (compiled for i386 emulation)
+...
+
+
+Same here. The "workaround" does not work on a DroboFS, since it was actually the default setting all along.
+
+root@DroboFS:~# cat /proc/cpu/alignment 
+User:		74283231
+System:		0
+Skipped:	0
+Half:		0
+Word:		74283231
+DWord:		0
+Multi:		0
+User faults:	2 (fixup)
+
+root@DroboFS:~# uname -a                                                                                                                        
+Linux DroboFS 2.6.22.18 #1 Thu Jan 20 14:29:47 PST 2011 armv5tejl GNU/Linux
+
+Tested qemu 0.14.0, but I can give 0.14.1 a try as well, if necessary.
+
+OK, that's pretty conclusive. My initial theory about what's going on here can't be right -- I'll investigate further.
+
+
+Did you modify some code to get it working on your armv5 ?
+
+No, I just wrote a simple test program to check the thing I thought was the problem (unaligned accesses). Do you still see the mangled text problems you describe earlier in the bug report as well as the 'fork: invalid argument' problem? I've reproduced the fork error message, but not the mangled text, and I'm having trouble thinking how that text mangling could happen with the /proc/cpu/alignment set to 2. (So I'm wondering if we actually have two bugs here.)
+
+To be concrete: does this still generate garbled text output?
+ strace -ff -o ls-strace.log chroot /i386 /usr/bin/qemu-i386 /bin/ls
+Does this?
+ chroot /i386 /usr/bin/qemu-i386 /bin/ls
+
+I'll look at the fork issue, anyway.
+
+
+Garbled text might have been fixed in the recent versions as it seems. Even with User faults == 0 the text is not garbled.
+
+[root@Plugbox ~]#  strace -ff -o ls-strace.log chroot /i386 /usr/bin/qemu-i386 /bin/ls
+Inconsistency detected by ld.so: dl-version.c: 230: _dl_check_map_versions: Assertion `needed != ((void *)0)' failed!
+[root@Plugbox ~]# cat /proc/cpu
+cpu/     cpuinfo
+[root@Plugbox ~]# cat /proc/cpu/alignment
+User:           23
+System:         1
+Skipped:        0
+Half:           0
+Word:           0
+DWord:          1
+Multi:          0
+User faults:    0 (ignored)
+
+
+ strace -ff -o ls-strace-alignment-2.log chroot /i386 /usr/bin/qemu-i386 /bin/ls
+qemu: Unsupported syscall: 240
+bin   dev  home  media  opt   root  srv  tmp  var
+boot  etc  lib   mnt    proc  sbin  sys  usr
+[root@Plugbox ~]# cat /proc/cpu/alignment
+User:           23
+System:         1
+Skipped:        0
+Half:           0
+Word:           0
+DWord:          1
+Multi:          0
+User faults:    2 (fixup)
+
+
+
+
+ chroot /i386 /usr/bin/qemu-i386 /bin/ls
+qemu: Unsupported syscall: 240
+bin   dev  home  media  opt   root  srv  tmp  var
+boot  etc  lib   mnt    proc  sbin  sys  usr
+
+
+
+
+
+[root@Plugbox ~]# strace -ff -o bash-strace-alignment-2.log chroot /i386 /usr/bin/qemu-i386 /bin/bash
+[root@Plugbox /]# ls
+bash: fork: Invalid argument
+[root@Plugbox /]# exit
+exit
+
+
+Ok, it seemed as though "ls" worked from  "strace -ff -o ls-strace-alignment-2.log chroot /i386 /usr/bin/qemu-i386 /bin/ls"
+
+so I tried to execute the package manager:
+
+[root@Plugbox ~]# chroot /i386 /usr/bin/qemu-i386 /usr/bin/pacman -Suy          qemu: Unsupported syscall: 240
+:: Synchronizing package databases...
+qemu: Unsupported syscall: 240
+qemu: Unsupported syscall: 240
+ core                     37.0K  166.6K/s 00:00:01 [######################] 100%
+ extra                   466.9K  524.3K/s 00:00:01 [######################] 100%
+ community               446.5K  518.5K/s 00:00:01 [######################] 100%
+:: The following packages should be upgraded first :
+    pacman
+:: Do you want to cancel the current operation
+:: and upgrade these packages now? [Y/n] Y
+
+resolving dependencies...
+looking for inter-conflicts...
+
+Targets (1): pacman-3.5.3-1
+
+Total Download Size:    0.82 MB
+Total Installed Size:   2.78 MB
+
+Proceed with installation? [Y/n] Y
+:: Retrieving packages from core...
+ pacman-3.5.3-1-i686     840.0K  731.3K/s 00:00:02 [######################] 100%
+checking package integrity...
+(1/1) checking for file conflicts                  [######################] 100%
+(1/1) upgrading pacman                             [######################] 100%
+warning: /etc/pacman.conf installed as /etc/pacman.conf.pacnew
+error: could not fork a new process (Invalid argument)
+error: could not fork a new process (Invalid argument)
+
+
+Still there's something going on with fork
+
+If you need an i386 chroot for testing, I created one a while ago (archlinux): http://www.mediafire.com/download.php?qq63mnay2byqqie
+
+
+I hope this can work so development for Dropbox on Drobo-FS can continue....
+
+I have the same exact problem on MIPSel host as well.
+
+Tried Qemu 0.14.1 and git from 110724.
+Trying to run something from bash gives fork: Invalid argument.
+strace gives clone(18874385,0,0,0,1084164376,1082144312) = -1 errno=22 (Invalid argument)
+There is no alignment switches on this CPU.
+
+So, it seems to be impossible to do useful user mode emulation of x86 from non-x86 platforms, which essentially makes the whole user mode emulation defunct.
+
+Further research shown that the issue is that NPTL (Native Posix Threads) is not supported for i386 user mode emulation.
+That causes the described issue in binaries compiled with NPTL (most modern ones).
+
+One way to fix this that worked for me is a patch from here:
+http://patchwork.ozlabs.org/patch/45206
+
+I was able to chroot into i386 on mipsel host with this one, and it mostly worked, no problems running other programs from bash.
+
+
+Awesome Artyom! I'm compiling now. I will report back if this patch works for arm as well.
+
+
+YES! That did the trick! 
+
+Though, with this patch I was unable to compile qemu 0.15rc1. I suppose the patch wasn't meant for it, but with 0.14.1 it works flawlessly. 
+
+Also, I had to do echo 2 >/proc/cpu/alignment as was mentioned by Peter. I hope the patch gets applied to the main tree.
+
+I would like to run wine. I have compiled qemu 0.15.5 from git and I noticed we can enable nptl without a patch. I can run an x86 nptl bash but I havent tried to chroot. I have the posix wine running with qemu... So i tried it with wine and I am able to get a --version out of it, but when I actually run it, it does a fork. It will ask for library files and I will stick them in /usr/gnemul/qemu-i386/usr/lib one at a time and everntually it stops asking for files and just errors out.
+
+Tried 0.9.22, 1.01 and 1.21...  Stole files from Ubuntu 5, Ubuntu 9, etc.
+
+root@localhost:/wine/usr/lib# wine-pthread
+wine-pthread
+qemu: Unsupported syscall: 240
+Usage: wine PROGRAM [ARGUMENTS...]   Run the specified program
+       wine --help                   Display this help and exit
+       wine --version                Output version information and exit
+
+
+root@localhost:/wine/usr/lib# wine-pthread notepad.exe
+wine-pthread notepad.exe
+qemu: Unsupported syscall: 240
+qemu: Unsupported syscall: 240
+wine: fork : Invalid argument
+
+On Posix it does an unsuportive syscall of 254 but works. I have seen it do a 240 though, but thats when its asking for library files.. I cant help but wonder if its needing a file, though not asking me.
+
+
+
+
+Here is a strace.. fumex calls???
+
+strace -ff -o /ls-strace-alignment-6.log /usr/bin/qemu-i386 /usr/bin/wine-pthread notepad.exe
+
+I had exactly the same behavior with a patched 0.14.1. Wine doesn't work and that was the reason I was so eager to run qemu. 
+
+Moonman, you know what I realized. I have the posix version of wine running okay with qemu-i386... But I have never been able to compile my own working version.. I realized that last night. I can compile, and it will run, but wine never actually runs, and Im compiling with --enable-sdl and all that. Tonight I am gonna try --cpu=armv7el instead of the armv4
+
+See this can run the posix wine.. But I cant recreate it. Its running qemu-0.12.2 which you can download and compile but I still cant get it to play solitaire like I can with the one below.
+
+
+wget http://a.trap.me.uk/qemu-i386
+
+Okay I found that 12.5 I can run posix wine and that is compiling on my own. gonna try the patch on 12.5 to see if it can run dynamic nptl binaries
+
+Odd.. If I do ./configure --static --enable-sdl --target-list=i386-linux-user this will work fine with 12.5 but on say 15 it cant find SDL. I am on 1.2.13 I think.
+
+https://bugs.launchpad.net/ubuntu/+source/qemu/+bug/855630
+
+I decided to give it, its own bug.
+
+Just wanted to mention that the patch in comment #32 worked for me also. I had to use the qemu-0.14.1.tar.gz source as mentioned in comment #34. On 0.15.0 I did not get a compile error, but when it ran I still couldn't fork. 
+
+Something odd. I installed VMWare with Ubuntu 11.04. Then I installed wine and qemu with apt-get. Same exact errors using qemu-i386. Verbatim.
+
+No armel at all in #44. Perhaps if qemu cant run wine with user emulation using x86.. it will not be able to do arm as well?
+
+This bug also pertains to armv7l.  I have a Debian chroot install on my Android phone, and was trying to do an i386 chroot within my chroot (want to run the i386 specific binaries included in the Android SDK).
+
+I installed the qemu-user-static package (tried both v  0.14.1 and 0.15.0).
+
+When putting qemu-i386-static in the usr/bin folder of my chroot, and trying to run `chroot .` I got the fork error mentioned above when executing any command-line programs. Incidentally-- it *did* work if I used `exec ls`, but obviously that would kill my chroot. I assume using exec just circumvented the fork() call.
+
+I was able to native compile qemu 0.14.1 as --static, with the patch provided in #32 above, and I can confirm it works fine -- no fork error.
+
+@Peter Maydell -- do you think you will get that patch incorporated into the main fork of QEMU? I imagine it becoming a bigger issue as more and more people start running full Linux distros on their ARM-based phones; especially as the mobile processors get faster.
+
+
+
+
+
+
+
+
+
+
+
+Steve: there are a number of issues with that patch:
+ * x86 cpu_set_tls() doesn't belong in linux-user/syscall.c (but it's not trivial to put it in target-i386 because it's calling do_set_thread_area())
+ * it's not "obviously correct" and the author says it needs review, and I'd have to dig out info about this obscure corner of the x86 ABI/architecture
+ * I'm pretty sure it's not the only thing needed for threading support on x86, so (until/unless I look much more closely at the whole area) I don't have much confidence that this patch is a coherent single part of the required work
+ * there's no Signed-off-by: line from the author so it can't be committed as is
+
+Hopefully somebody else on the list will have time to look properly at the patch; I'm afraid I don't expect to currently.
+
+
+Just to give some support to what Peter said, here is my experience with the patch from #32.
+
+I cross-compiled qemu 0.14.1 with the patch to ARMv5 and tried to run the i386 linux binary for dropbox. Although I no longer see the fork error message, the process gets stuck in an infinite loop running at 100% CPU. When started with -strace, this is where it gets stuck:
+
+clock_gettime(0,1169900288,135693248,1,0,1169900372) = 0
+futex(0x081683c4,FUTEX_PRIVATE_FLAG|FUTEX_WAIT,1,0x45bb4300,0x081683f0,135693296​) = -1 errno=110 (Connection timed out)
+gettimeofday(1169900364,0,0,1,142600008,1169900392) = 0
+futex(0x081683f0,FUTEX_PRIVATE_FLAG|FUTEX_WAKE,1,0x081683f0,0x087fe748,142600008​) = 0
+
+This four line block gets repeated over and over again.
+
+To the best of my knowledge, this is the same as the dreaded "unsupported syscall 240" error, just with fancier output. My feeling is that the patch only fixes some very small part of the problem.
+
+@Peter - thanks, fair enough... I don't know enough about qemu's source to understand what you mean, but clearly it's a complex issue. For now the patch seems to work for me-- I haven't had the issue that @Ricardo discusses (again, I'm on armv7l, though).
+
+
+@Ricardo I did not have such a problem and it ran all simple programs just fine (top, ls, cd, cp and so on) on my armv5t. Though I did not cross-compile, but natively compiled qemu on the box itself. 
+It would be cool to have it working, but I don't think it will happen any time soon. I just bought eeepc 700 for $50 and run all x86 binary-only stuff on it as full-qemu is too heavy :)
+
+HOW TO COMPILE ON ARM AND UBUNTU 12.04
+
+This will run wine if you compile with 0.13 or 0.14
+
+sudo apt-get install zlib1g-dev
+sudo apt-get install libsdl1.2-dev
+./configure --target-list=i386-linux-user --enable-sdl --prefix=/usr --cross-prefix=arm-linux-gnueabi- --host-cc=gcc4.6 --extra-cflags=-marm --cpu=armv4l
+make
+sudo make install
+
+Works great on Droid4 with Ubuntu 12.04 Chroot and Wine 0.9.14
+http://www.onsitedentalsystems.com/wine.tar.gz
+DOES NOT WORK ON 0.15.. NO IDEA WHY.
+
+how to run without binfmt support in the kernel.
+
+/usr/bin/qemu-i386 /usr/bin/wineserver
+/usr/bin/qemu-i386 /usr/bin/wine-pthread notepad.exe
+or
+/usr/bin/qemu-i386 -L /usr/gnemul/qemu-i386 /usr/bin/wineserver
+/usr/bin/qemu-i386 -L /usr/gnemul/qemu-i386 /usr/bin/wine-pthread notepad.exe
+
+If you do have binfmt support.
+
+mount -t binfmt_misc none /proc/sys/fs/binfmt_misc
+echo ':i386:M::\x7fELF\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x03:\xff\xff\xff\xff\xff\xfe\xfe\xff\xff\xff\xff\xff\xff\xff\xff\xff\xfb\xff\xff:/home/user/qemu-i386:' >/proc/sys/fs/binfmt_misc/register
+
+then you can just do
+/usr/bin/qemu-i386 /usr/bin/wine-pthread notepad.exe
+everytime.
+
+So this is a compiler or system header error?
+
+Anybody examined the differences in code generated with native compiler and crosscompiler?
+
+Is there some code difference or are wrong kernel headers pulled from i386 resulting in invalid syscalls?
+
+Michal Suchanek wrote:
+> So this is a compiler or system header error?
+>
+> Anybody examined the differences in code generated with native compiler and crosscompiler?
+
+...this comment doesn't make much sense to me -- did you add it to the wrong bug report by mistake? i386 user mode's issues are not related to any cross-vs-native compilation issue or to system header mismatches. It is straightforwardly missing functionality in QEMU that causes various effects which manifest differently depending on what exactly the target binary is doing and how it was compiled (eg which target i386 libc).
+
+
+It might be just coincidence but if you read the above comments you will notice that people who compiled qemu natively on arm report that they can run various binaries without issue but people who crosscompiled report that they can't run the simplest i386 shell utilities.
+
+How come that the functionality that is missing magically appears for some people?
+
+I do now know...  I compile on my phone and tablet. In fact I loaded Ubuntu on my Touchpad last night, native.
+
+http://code.google.com/p/hp-touchpad-ubuntu/wiki/Installation
+
+No more chroot to deal with.
+
+> How come that the functionality that is missing magically appears for some people?
+
+Coincidence. Nobody on this bug report has reported that they've been able to run x86 binary X with a native compiled qemu but not with a cross compiled version of the same qemu sources. I think it is vastly more likely that the people who find that some of their code works are using differently compiled x86 binaries which happen not to use a glibc which provokes the 'invalid syscall' issue [ie fork() does not end up doing a clone syscall with whatever flags are causing us to return EINVAL].
+
+
+I am now able to run winecfg... you have to have wine-pthread run winecfg
+qemu-i386 /usr/bin/qemu-i386 wine-pthread winecfg
+All the tabs load except audio.. For that it hangs..
+
+Trying to fix that.. I want to run an app that hangs and it uses audio.
+
+Interesting stuff.  
+With 0.14 and 1.2
+wineserver will run if you say wineserver -d2 -f -p for example.
+I believe it is forking when you run plain old wineserver because it really is getting an invalid argument. 
+
+I am running Wine 1.1.14 and Qemu 0.14 and I can run many apps.
+
+I cannot run a NeoBook app.. 
+
+
+"Runtime error 216 at 004040E6"
+
+Any idea why? =)
+
+If you run Wine 1.1.14 and the latest qemu from master as of tonight.. wineserver will load with wine-pthread but when wine-pthread runs you get "connection reset by peer" by wine-pthread. Just an FYI
+
+Wine 1.1.4 was taken from Fedora Cora 9
+
+Does this have anything to do with Memory Mapping? I have a feeling it does.... 
+
+I notice the mmap_min_addr setting for arm is 4096
+
+For x86 its 65536
+
+http://www.onsitedentalsystems.com/error.jpg
+
+
+The app I am testing does run on qemu-i386 compiled for x86..  and the host is x86.
+
+The screen shot I posted in the last post is what happens when you run qemu and wine on arm instead of qemu and wine on x86.
+
+Requirements to get Wine 1.5.11 and Qemu to work with Ubuntu 12.10 on ARM
+
+1. VMSPLIT-3G and BINFMT_MISC must be compiled into the kernel.. It makes my kernel crash when I access the lan\wifi with traffic..
+2. Use Qemu-0.14.1 with the NPTL Patch ./configure --enable-sdl --target-list=i386-linux-user --prefix=/usr --extra-cflags=-marm to compile.. I compile it in Ubuntu for Arm.
+3. Compile Wine 1.5.11 on Ubuntu 12.10 32bit X86.
+4. Create /usr/gnemul/qemu-i386/lib /usr/gnemul/qemu-i386/usr/local/lib, /usr/gnemul/qemu-i386/usr/local/lib/wine /usr/gnemul/qemu-i386/usr/lib /usr/gnemul/qemu-i386/usr/lib/i386-linux-gnu  and copy the corresponding files from X86. Qemu\Wine will ask for them. Bring over your ~/.wine directory and put it in your home folder.
+5. sudo apt-get build-dep wine (do this on arm)
+6  Binfmt time. Here is my script to get wine to run
+echo ':i386:M::\x7fELF\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x03:\xff\xff\xff\xff\xff\xfe\xfe\xff\xff\xff\xff\xff\xff\xff\xff\xff\xfb\xff\xff:/usr/bin/qemu-i386:' >/proc/sys/fs/binfmt_misc/register
+echo ':DOSWin:M::MZ::/usr/local/bin/wine:' >/proc/sys/fs/binfmt_misc/register
+
+
+
+7. If you do ALL that... Then winecfg will run. About to start testing programs.
+
+Pinball runs VERY FAST! VERY PLAYABLE NOW!!!!!!!!!!!  :D 
+
+Justin Shafer
+OnsiteDentalSystems.com
+
+
+Oh yeah.. wine goes in /usr/local/bin. I created a symbolic link from /usr/gnemul/qemu-i386/usr/local/lib/libwine* /usr/local/lib. Same with the wine folder.. it needs to be seen as /usr/local/lib/wine.
+
+I still have one program that refuses to run.. I think its having a problem with an x86 library on the gnemul side... I noticed libpng.so.3 wanted to be in the gnemul folder by wine.. even though it didn't exist on the X86 machine I was using to compile.. so I copied it from libpng12.so.. 
+
+Anyone have an Idea about that???????????
+
+Something new...
+
+I have started to compile qemu with all the audio drivers --audio-drv-list="oss alsa ps sdl  esd" on 0.14.1 with a patch that was included in 0.15 and it compiles IF I edit ioctls.h and remove 3 lines about sound. Oddly enough my kernel from CM9\Ubuntu is not compiled with those 3 lines I removed.. So I am recompiling my kernel and then I am going to recompile qemu and I bet I can compile it without removing those 3 lines.
+
+-Justin
+
+Wine 1.5.11 is a lot funner to play with then 0.9.14
+
+-----Original Message-----
+From: <email address hidden> [mailto:<email address hidden>] On Behalf Of Bug Watch Updater
+Sent: Sunday, November 18, 2012 5:39 AM
+To: <email address hidden>
+Subject: [Bug 739785] Re: qemu-i386 user mode can't fork (bash: fork: Invalid argument)
+
+** Changed in: qemu (Debian)
+       Status: Unknown => Confirmed
+
+-- 
+You received this bug notification because you are subscribed to the bug
+report.
+https://bugs.launchpad.net/bugs/739785
+
+Title:
+  qemu-i386 user mode can't fork (bash: fork: Invalid argument)
+
+Status in QEMU:
+  New
+Status in “qemu” package in Debian:
+  Confirmed
+
+Bug description:
+  Good time of day everybody,
+
+  I have been trying to make usermode qemu on ARM with plugapps
+  (archlinux) with archlinux i386 chroot to work.
+
+  1. I installed arch linux in a virtuabox and created a chroot for it with mkarchroot. Transferred it to my pogo plug into /i386/
+  2. I comiled qemu-i386 static and put it into /i386/usr/bin/
+  ./configure --static --disable-blobs --disable-system --target-list=i386-linux-user
+  make
+
+  3. I also compiled linux kernel 2.6.38 with CONFIG_BINFMT_MISC=y and installed it.
+  uname -a
+  Linux Plugbox 2.6.38 #4 PREEMPT Fri Mar 18 22:19:10 CDT 2011 armv5tel Feroceon 88FR131 rev 1 (v5l) Marvell SheevaPlug Reference Board GNU/Linux
+
+  4. Added the following options into /etc/rc.local
+  /sbin/modprobe binfmt_misc
+  /bin/mount binfmt_misc -t binfmt_misc /proc/sys/fs/binfmt_misc
+  echo ':qemu-i386:M::\x7fELF\x01\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x03\x00:\xff\xff\xff\xff\xff\xfe\xfe\xff\xff\xff\xff\xff\xff\xff\xff\xff\xfb\xff\xff\xff:/usr/bin/qemu-i386:' >/proc/sys/fs/binfmt_misc/register
+
+  5. Also copied ld-linux.so.3 (actually ld-2.13.so because ld-
+  linux.so.3 is a link to that file) from /lib/ to /i386/lib/
+
+  6.Now i chroot into /i386 and I get this:
+  [root@Plugbox i386]# chroot .
+  [II aI hnve ao n@P /]# pacman -Suy
+  bash: fork: Invalid argument
+
+  7.I also downloaded linux-user-test-0.3 from qemu website and ran the test:
+  [root@Plugbox linux-user-test-0.3]# make
+  ./qemu-linux-user.sh
+  [qemu-i386]
+  ../qemu-0.14.0/i386-linux-user/qemu-i386 -L ./gnemul/qemu-i386 i386/ls -l dummyfile
+  BUG IN DYNAMIC LINKER ld.so: dl-version.c: 210: _dl_check_map_versions: Assertion `needed != ((void *)0)' failed!
+  make: *** [test] Error 127
+
+To manage notifications about this bug go to:
+https://bugs.launchpad.net/qemu/+bug/739785/+subscriptions
+
+
+
+Open GL Works with wglgears.
+
+ubuntu@hptp-u1210b1:~/.wine/drive_c$ wine ./wglgears.exe
+qemu: Unsupported syscall: 254
+Unsupported ancillary data: 1/2
+qemu: Unsupported syscall: 242
+Unsupported ancillary data: 1/2
+qemu: Unsupported syscall: 242
+Unsupported ancillary data: 1/2
+qemu: Unsupported syscall: 242
+Unsupported ancillary data: 1/2
+qemu: Unsupported syscall: 242
+qemu: Unsupported syscall: 242
+qemu: Unsupported syscall: 242
+Unsupported ancillary data: 1/2
+qemu: Unsupported syscall: 242
+qemu: Unsupported syscall: 242
+qemu: Unsupported syscall: 242
+qemu: Unsupported syscall: 242
+qemu: Unsupported syscall: 242
+qemu: Unsupported syscall: 242
+qemu: Unsupported syscall: 242
+qemu: Unsupported syscall: 242
+Unsupported ancillary data: 1/2
+qemu: Unsupported syscall: 242
+qemu: Unsupported syscall: 242
+qemu: Unsupported syscall: 242
+qemu: Unsupported syscall: 242
+qemu: Unsupported syscall: 242
+Unsupported ancillary data: 1/2
+qemu: Unsupported syscall: 242
+err:winediag:X11DRV_WineGL_InitOpenglInfo Direct rendering is disabled, most likely your OpenGL drivers haven't been installed correctly (using GL renderer "Software Rasterizer", version "1.4 (2.1 Mesa 9.0)").
+366 frames in 5.0 seconds = 73.200 FPS
+315 frames in 5.0 seconds = 63.000 FPS
+312 frames in 5.0 seconds = 62.400 FPS
+334 frames in 5.0 seconds = 66.800 FPS
+340 frames in 5.0 seconds = 68.000 FPS
+320 frames in 5.0 seconds = 64.000 FPS
+340 frames in 5.0 seconds = 68.000 FPS
+320 frames in 5.0 seconds = 64.000 FPS
+340 frames in 5.0 seconds = 68.000 FPS
+340 frames in 5.0 seconds = 68.000 FPS
+
+
+
+I have just encountered this trying to emulate i386 on x86_64, which should dismiss any theories about ARM or MIPS. I've tried to apply the previous patch to QEMU 1.2.2 but it doesn't build. Currently trying to fix it.
+
+I get an undefined reference to cpu_set_tls. The other architectures have this defined in target-*/cpu.h but the implementations vary. They generally seem to modify a register or two. I'm out of my depth here. I have no idea what that would look like for i386.
+
+Apologies, I missed part of the patch when trying to reapply it. Here it is. It seems to work.
+
+http://forum.winehq.org/viewtopic.php?f=2&t=17701
+
+Here is where I got...  Read the whole thing.. 
+
+-----Original Message-----
+From: <email address hidden> [mailto:<email address hidden>] On Behalf Of James Le Cuirot
+Sent: Monday, January 21, 2013 4:16 PM
+To: <email address hidden>
+Subject: [Bug 739785] Re: qemu-i386 user mode can't fork (bash: fork: Invalid argument)
+
+Apologies, I missed part of the patch when trying to reapply it. Here it is. It seems to work.
+
+** Patch added: "add-usermode-NPTL-support-for-i386.patch"
+   https://bugs.launchpad.net/qemu/+bug/739785/+attachment/3493200/+files/add-usermode-NPTL-support-for-i386.patch
+
+--
+You received this bug notification because you are subscribed to the bug report.
+https://bugs.launchpad.net/bugs/739785
+
+Title:
+  qemu-i386 user mode can't fork (bash: fork: Invalid argument)
+
+Status in QEMU:
+  New
+Status in “qemu” package in Debian:
+  Confirmed
+
+Bug description:
+  Good time of day everybody,
+
+  I have been trying to make usermode qemu on ARM with plugapps
+  (archlinux) with archlinux i386 chroot to work.
+
+  1. I installed arch linux in a virtuabox and created a chroot for it with mkarchroot. Transferred it to my pogo plug into /i386/
+  2. I comiled qemu-i386 static and put it into /i386/usr/bin/
+  ./configure --static --disable-blobs --disable-system --target-list=i386-linux-user
+  make
+
+  3. I also compiled linux kernel 2.6.38 with CONFIG_BINFMT_MISC=y and installed it.
+  uname -a
+  Linux Plugbox 2.6.38 #4 PREEMPT Fri Mar 18 22:19:10 CDT 2011 armv5tel Feroceon 88FR131 rev 1 (v5l) Marvell SheevaPlug Reference Board GNU/Linux
+
+  4. Added the following options into /etc/rc.local
+  /sbin/modprobe binfmt_misc
+  /bin/mount binfmt_misc -t binfmt_misc /proc/sys/fs/binfmt_misc
+  echo ':qemu-i386:M::\x7fELF\x01\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x03\x00:\xff\xff\xff\xff\xff\xfe\xfe\xff\xff\xff\xff\xff\xff\xff\xff\xff\xfb\xff\xff\xff:/usr/bin/qemu-i386:' >/proc/sys/fs/binfmt_misc/register
+
+  5. Also copied ld-linux.so.3 (actually ld-2.13.so because ld-
+  linux.so.3 is a link to that file) from /lib/ to /i386/lib/
+
+  6.Now i chroot into /i386 and I get this:
+  [root@Plugbox i386]# chroot .
+  [II aI hnve ao n@P /]# pacman -Suy
+  bash: fork: Invalid argument
+
+  7.I also downloaded linux-user-test-0.3 from qemu website and ran the test:
+  [root@Plugbox linux-user-test-0.3]# make
+  ./qemu-linux-user.sh
+  [qemu-i386]
+  ../qemu-0.14.0/i386-linux-user/qemu-i386 -L ./gnemul/qemu-i386 i386/ls -l dummyfile
+  BUG IN DYNAMIC LINKER ld.so: dl-version.c: 210: _dl_check_map_versions: Assertion `needed != ((void *)0)' failed!
+  make: *** [test] Error 127
+
+To manage notifications about this bug go to:
+https://bugs.launchpad.net/qemu/+bug/739785/+subscriptions
+
+
+
+This is a long and confusing bug report, but recent commits to make NPTL non-optional (and in particular enable it for x86-64 and i386) which will be in QEMU 1.6 should mean that the originally reported problem (of bash failing with "fork: Invalid argument") is fixed, and at least basic single-threaded x86 guest programs should work with linux-user. There may well be other issues still remaining for trying to run complex guest programs like Wine; if so please file fresh reports after retesting with 1.6.
+
+
+Sorry to change the status. I'm not that familiar with Launchpad and  was looking for a commit that fixes this bug.
+
+Commits aa004f5f9 to 24cb36a61c (13 in total) are the patchset that fix this.
+
+
+Wine works! =) Didn't know if you knew... no more old qemu.
+
+You da man!
+
+On Tue, Aug 6, 2013 at 3:33 AM, Peter Maydell <email address hidden>
+wrote:
+
+> Commits aa004f5f9 to 24cb36a61c (13 in total) are the patchset that fix
+> this.
+>
+> --
+> You received this bug notification because you are subscribed to the bug
+> report.
+> https://bugs.launchpad.net/bugs/739785
+>
+> Title:
+>   qemu-i386 user mode can't fork (bash: fork: Invalid argument)
+>
+> Status in QEMU:
+>   Fix Committed
+> Status in “qemu” package in Debian:
+>   Confirmed
+>
+> Bug description:
+>   Good time of day everybody,
+>
+>   I have been trying to make usermode qemu on ARM with plugapps
+>   (archlinux) with archlinux i386 chroot to work.
+>
+>   1. I installed arch linux in a virtuabox and created a chroot for it
+> with mkarchroot. Transferred it to my pogo plug into /i386/
+>   2. I comiled qemu-i386 static and put it into /i386/usr/bin/
+>   ./configure --static --disable-blobs --disable-system
+> --target-list=i386-linux-user
+>   make
+>
+>   3. I also compiled linux kernel 2.6.38 with CONFIG_BINFMT_MISC=y and
+> installed it.
+>   uname -a
+>   Linux Plugbox 2.6.38 #4 PREEMPT Fri Mar 18 22:19:10 CDT 2011 armv5tel
+> Feroceon 88FR131 rev 1 (v5l) Marvell SheevaPlug Reference Board GNU/Linux
+>
+>   4. Added the following options into /etc/rc.local
+>   /sbin/modprobe binfmt_misc
+>   /bin/mount binfmt_misc -t binfmt_misc /proc/sys/fs/binfmt_misc
+>   echo
+> ':qemu-i386:M::\x7fELF\x01\x01\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x02\x00\x03\x00:\xff\xff\xff\xff\xff\xfe\xfe\xff\xff\xff\xff\xff\xff\xff\xff\xff\xfb\xff\xff\xff:/usr/bin/qemu-i386:'
+> >/proc/sys/fs/binfmt_misc/register
+>
+>   5. Also copied ld-linux.so.3 (actually ld-2.13.so because ld-
+>   linux.so.3 is a link to that file) from /lib/ to /i386/lib/
+>
+>   6.Now i chroot into /i386 and I get this:
+>   [root@Plugbox i386]# chroot .
+>   [II aI hnve ao n@P /]# pacman -Suy
+>   bash: fork: Invalid argument
+>
+>   7.I also downloaded linux-user-test-0.3 from qemu website and ran the
+> test:
+>   [root@Plugbox linux-user-test-0.3]# make
+>   ./qemu-linux-user.sh
+>   [qemu-i386]
+>   ../qemu-0.14.0/i386-linux-user/qemu-i386 -L ./gnemul/qemu-i386 i386/ls
+> -l dummyfile
+>   BUG IN DYNAMIC LINKER ld.so: dl-version.c: 210: _dl_check_map_versions:
+> Assertion `needed != ((void *)0)' failed!
+>   make: *** [test] Error 127
+>
+> To manage notifications about this bug go to:
+> https://bugs.launchpad.net/qemu/+bug/739785/+subscriptions
+>
+
+