add new temporary deepseek-r1:14b results

1 files changed, 36 insertions, 0 deletions

diff --git a/results/classifier/deepseek-2-tmp/reasoning/manual-review/1400768 b/results/classifier/deepseek-2-tmp/reasoning/manual-review/1400768
new file mode 100644
index 000000000..61da5ea85
--- /dev/null
+++ b/results/classifier/deepseek-2-tmp/reasoning/manual-review/1400768
@@ -0,0 +1,36 @@
+<think>
+
+</think>
+
+The output you've provided appears to be a debug or diagnostic log from a system, possibly related to x86 assembly or virtualization. Here's a breakdown of the key components:
+
+1. **Segments**:
+   - **CS (Code Segment)**: DPL=0 indicates it's a ring 0 segment (kernel mode). The base is `00000000` and limit is `ffffffff`, indicating a full range.
+   - **DS, ES, FS, GS**: All are data segments with DPL=0, meaning they are also in ring 0. They have the same base and limit as CS.
+   - **LDT (Local Descriptor Table)**: The LDT is empty (`0000`), but it's marked as busy.
+
+2. **GDT and IDT**:
+   - **GDT (Global Descriptor Table)**: Points to `0x000f6be8` with size `0x37`.
+   - **IDT (Interrupt Descriptor Table)**: Points to `0x000f6c26` with size `0`.
+
+3. **CR Registers**:
+   - **CR0**: `0x60000011` – Contains flags like PE (protected mode), MP (multiprocessor), and others.
+   - **CR1**: Not shown, but typically not used in x86-32.
+   - **CR2**: Points to `0x00000000`.
+   - **CR3**: Points to `0x00000000`.
+   - **CR4**: All bits are 0.
+
+4. **Debug and Trace Registers**:
+   - **DR0-DR3**: All zeros.
+   - **DR6**: `0xffff0ff0` – Indicates debug traps are enabled for the first four data segments.
+   - **DR7**: `0x00000400` – Enables breakpoints on memory access.
+
+5. **Floating Point and SIMD Registers**:
+   - **FCW (Floating Point Control Word)**: `0x037f` – Standard IEEE 754 settings.
+   - **MXCSR**: `0x1f80` – Default for SSE/SSE2 with denormals disabled.
+   - **FPRs and XMMs**: All registers are zeroed out.
+
+6. **Aborted**:
+   - The process was interrupted or terminated, possibly due to an error or external signal.
+
+This log provides detailed information about the system's state at the time of the abort, particularly useful for debugging purposes in low-level programming or virtualization contexts.
\ No newline at end of file