add deepseek and gemma results

1 files changed, 50 insertions, 0 deletions

diff --git a/results/classifier/deepseek-2/reasoning/manual-review/860 b/results/classifier/deepseek-2/reasoning/manual-review/860
new file mode 100644
index 000000000..70a6eab36
--- /dev/null
+++ b/results/classifier/deepseek-2/reasoning/manual-review/860
@@ -0,0 +1,50 @@
+<think>
+
+</think>
+
+The output you've provided appears to be a log or dump from a QEMU simulation of a PowerPC64 (PPC64) system. Here's a breakdown of what the output represents and its possible implications:
+
+### Key Components:
+1. **GPR Registers**:
+   - `GPR08`, `GPR12`, `GPR16`, `GPR20`, `GPR24`, `GPR28` show hexadecimal values.
+   - All GPRs (General Purpose Registers) are initialized to `0000000000000000`, indicating that these registers contain zeros at the time of this dump.
+
+2. **CR Register**:
+   - `CR 00000000` shows the condition register, which is also initialized to zero.
+   - The status bits (e.g., overflow, negative, etc.) are all cleared.
+
+3. **SRR0 and SRR1**:
+   - These registers are part of the exception handling mechanism in PowerPC architectures.
+   - Both are set to `0000000000000000`, indicating no exceptions are being handled at this point.
+
+4. **PVR (Processor Version Register)**:
+   - `PVR 00000000004e1202` indicates the processor version. This suggests a specific model of PowerPC processor is being simulated by QEMU.
+
+5. **VRSAVE**:
+   - `VRSAVE 0000000000000000` shows that the vector register save area is initialized to zero.
+
+6. **SPRG Registers**:
+   - All SPRG (Special Purpose Register Group) registers are set to `0000000000000000`.
+
+7. **HSRR0 and HSRR1**:
+   - These registers are also initialized to zero.
+
+8. **CFAR, LPCR, PTCR, DAR, DSISR**:
+   - All these control and exception-related registers are set to zero or specific default values.
+
+9. **Timestamps**:
+   - The log shows that the QEMU simulation terminated on `2022-02-04T18:19:47.323915Z` due to signal 15 (likely a SIGTERM) from process ID 1645.
+   - A shutdown message follows, indicating the reason was "destroyed."
+
+### Interpretation:
+This output represents a clean state of a PowerPC64 system being simulated by QEMU. All general-purpose and special-purpose registers are initialized to zero, which is typical for the initial state of a processor before any instructions are executed.
+
+The termination of QEMU due to signal 15 suggests that the simulation was explicitly shut down, possibly by an external process or script. The "reason=destroyed" indicates that the shutdown was likely caused by the destruction of some resource or object in the simulation environment.
+
+### Possible Scenarios:
+- **Normal Shutdown**: If this dump occurs after a clean shutdown, it may indicate successful termination of the QEMU instance.
+- **Crash**: If this dump occurred due to an unexpected crash, further investigation would be needed to determine the cause (e.g., bugs in QEMU or the simulated hardware).
+- **Testing**: This could also be part of testing where the system is intentionally shut down after a specific period or event.
+
+### Conclusion:
+The output shows a clean state of the PowerPC64 registers and indicates that the QEMU simulation was terminated gracefully. If this is expected behavior, it suggests no issues; otherwise, further debugging would be necessary to understand why the simulation was terminated.
\ No newline at end of file